! Started logfile: J1336-1852_S_2017_02_19_pus_uvs.log on Sat May 4 18:52:14 2019 obs J1336-1852_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1336-1852_S_2017_02_19_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.77154 visibilities/baseline/integration-bin. ! Found source: J1336-1852 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 15832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1336-1852_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 481 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.644639Jy sigma=0.004691 ! Fit after self-cal, rms=0.634592Jy sigma=0.004620 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.485 mas, bmaj=6.533 mas, bpa=-4.147 degrees ! Estimated noise=1149.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.28676 Jy ! Component: 100 - total flux cleaned = 0.350078 Jy ! Total flux subtracted in 100 components = 0.350078 Jy ! Clean residual min=-0.019515 max=0.025596 Jy/beam ! Clean residual mean=-0.000003 rms=0.005280 Jy/beam ! Combined flux in latest and established models = 0.350078 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.350078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147235Jy sigma=0.000973 ! Fit after self-cal, rms=0.147227Jy sigma=0.000973 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=7.372 mas, bpa=-3.101 degrees ! Estimated noise=853.277 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271297 Jy ! Component: 100 - total flux cleaned = 0.0389936 Jy ! Component: 150 - total flux cleaned = 0.0416008 Jy ! Component: 200 - total flux cleaned = 0.0427168 Jy ! Total flux subtracted in 200 components = 0.0427168 Jy ! Clean residual min=-0.018222 max=0.022350 Jy/beam ! Clean residual mean=0.000010 rms=0.004902 Jy/beam ! Combined flux in latest and established models = 0.392795 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.392795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141523Jy sigma=0.000941 ! Fit after self-cal, rms=0.141504Jy sigma=0.000941 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 1.29 KP 1.00 ! LA 0.99 MK 0.99 NL 0.90 OV 1.02 ! PT 1.00* SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.32 KP 0.96 ! LA 0.94 MK 0.99 NL 1.13 OV 1.04 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.99 HN 1.27 KP 0.85 ! LA 0.73 MK 1.02 NL 1.19 OV 0.95 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.26 KP 1.00* ! LA 0.74 MK 1.21 NL 1.00* OV 1.04 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.141504Jy sigma=0.000941 ! Fit after self-cal, rms=0.133230Jy sigma=0.000829 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.968 mas, bmaj=7.322 mas, bpa=-1.739 degrees ! Estimated noise=847.695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00694147 Jy ! Component: 100 - total flux cleaned = -0.00732199 Jy ! Component: 150 - total flux cleaned = -0.00761278 Jy ! Component: 200 - total flux cleaned = -0.00795616 Jy ! Total flux subtracted in 200 components = -0.00795616 Jy ! Clean residual min=-0.019428 max=0.013932 Jy/beam ! Clean residual mean=-0.000001 rms=0.003765 Jy/beam ! Combined flux in latest and established models = 0.384838 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 0.384838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132404Jy sigma=0.000826 ! Fit after self-cal, rms=0.132504Jy sigma=0.000826 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132504Jy sigma=0.000826 ! Fit after self-cal, rms=0.145598Jy sigma=0.000692 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.969 mas, bmaj=7.271 mas, bpa=-1.981 degrees ! Estimated noise=859.891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459034 Jy ! Component: 100 - total flux cleaned = 0.00447476 Jy ! Component: 150 - total flux cleaned = 0.00427387 Jy ! Component: 200 - total flux cleaned = 0.00418583 Jy ! Total flux subtracted in 200 components = 0.00418583 Jy ! Clean residual min=-0.006200 max=0.005650 Jy/beam ! Clean residual mean=0.000004 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 0.389024 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.389024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145382Jy sigma=0.000690 ! Fit after self-cal, rms=0.145923Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.44151e-05 Jy ! Component: 100 - total flux cleaned = -0.00013708 Jy ! Component: 150 - total flux cleaned = -0.000133942 Jy ! Component: 200 - total flux cleaned = -0.00018764 Jy ! Total flux subtracted in 200 components = -0.00018764 Jy ! Clean residual min=-0.006299 max=0.005599 Jy/beam ! Clean residual mean=0.000004 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.388837 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.388837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145870Jy sigma=0.000689 ! Fit after self-cal, rms=0.145868Jy sigma=0.000689 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145868Jy sigma=0.000689 ! Fit after self-cal, rms=0.153592Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.287 mas, bpa=-2.165 degrees ! Estimated noise=859.233 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304559 Jy ! Component: 100 - total flux cleaned = 0.000337135 Jy ! Component: 150 - total flux cleaned = 0.000362567 Jy ! Component: 200 - total flux cleaned = 0.000362686 Jy ! Total flux subtracted in 200 components = 0.000362686 Jy ! Clean residual min=-0.002466 max=0.002438 Jy/beam ! Clean residual mean=0.000005 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.389199 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.389199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153575Jy sigma=0.000667 ! Fit after self-cal, rms=0.153601Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30.5, -81.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219258 Jy ! Component: 100 - total flux cleaned = 0.00253719 Jy ! Component: 150 - total flux cleaned = 0.0024645 Jy ! Component: 200 - total flux cleaned = 0.00243265 Jy ! Total flux subtracted in 200 components = 0.00243265 Jy ! Clean residual min=-0.002303 max=0.002231 Jy/beam ! Clean residual mean=0.000006 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.391632 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.391632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153553Jy sigma=0.000667 ! Fit after self-cal, rms=0.153546Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153546Jy sigma=0.000667 ! Fit after self-cal, rms=0.153531Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.074 mas, bmaj=14.18 mas, bpa=6.069 degrees ! Estimated noise=1140.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000587747 Jy ! Component: 100 - total flux cleaned = 0.000830439 Jy ! Component: 150 - total flux cleaned = 0.00104888 Jy ! Component: 200 - total flux cleaned = 0.00112305 Jy ! Total flux subtracted in 200 components = 0.00112305 Jy ! Clean residual min=-0.002108 max=0.003414 Jy/beam ! Clean residual mean=0.000012 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.392755 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 80 components and 0.392755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153522Jy sigma=0.000667 ! Fit after self-cal, rms=0.153522Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017105 Jy ! Component: 100 - total flux cleaned = 0.00132141 Jy ! Component: 150 - total flux cleaned = 0.000921281 Jy ! Component: 200 - total flux cleaned = 0.000695952 Jy ! Total flux subtracted in 200 components = 0.000695952 Jy ! Clean residual min=-0.001881 max=0.002061 Jy/beam ! Clean residual mean=0.000005 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.393451 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 121 components and 0.393451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153488Jy sigma=0.000666 ! Fit after self-cal, rms=0.153486Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.291 mas, bpa=-2.196 degrees ! Estimated noise=859.474 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.959 x 7.291 at -2.196 degrees (North through East) ! Clean map min=-0.0018108 max=0.37942 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=6.399 mas, bpa=-3.237 degrees ! Estimated noise=1181.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294779 Jy ! Component: 100 - total flux cleaned = 0.35906 Jy ! Component: 150 - total flux cleaned = 0.375618 Jy ! Component: 200 - total flux cleaned = 0.382998 Jy ! Total flux subtracted in 200 components = 0.382998 Jy ! Clean residual min=-0.003039 max=0.003725 Jy/beam ! Clean residual mean=0.000001 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.382998 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.382998 Jy ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.291 mas, bpa=-2.196 degrees ! Estimated noise=859.474 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00503321 Jy ! Component: 100 - total flux cleaned = 0.00830263 Jy ! Component: 150 - total flux cleaned = 0.0108453 Jy ! Component: 200 - total flux cleaned = 0.0119437 Jy ! Total flux subtracted in 200 components = 0.0119437 Jy ! Clean residual min=-0.001970 max=0.002096 Jy/beam ! Clean residual mean=0.000003 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.394941 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 44 components and 0.394941 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.074 mas, bmaj=14.18 mas, bpa=6.069 degrees ! Estimated noise=1140.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120543 Jy ! Component: 100 - total flux cleaned = -0.000244188 Jy ! Component: 150 - total flux cleaned = -5.96645e-05 Jy ! Component: 200 - total flux cleaned = 5.0351e-05 Jy ! Total flux subtracted in 200 components = 5.0351e-05 Jy ! Clean residual min=-0.001861 max=0.001985 Jy/beam ! Clean residual mean=0.000003 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.394992 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162676 Jy ! Component: 100 - total flux cleaned = 0.000306434 Jy ! Component: 150 - total flux cleaned = 0.000280927 Jy ! Component: 200 - total flux cleaned = 0.000256649 Jy ! Total flux subtracted in 200 components = 0.000256649 Jy ! Clean residual min=-0.001848 max=0.001998 Jy/beam ! Clean residual mean=0.000002 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.395248 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 100 components and 0.395248 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.291 mas, bpa=-2.196 degrees ! Estimated noise=859.474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427832 Jy ! Component: 100 - total flux cleaned = 0.000376508 Jy ! Component: 150 - total flux cleaned = 0.000121194 Jy ! Component: 200 - total flux cleaned = -1.89317e-05 Jy ! Total flux subtracted in 200 components = -1.89317e-05 Jy ! Clean residual min=-0.001880 max=0.001875 Jy/beam ! Clean residual mean=0.000001 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.395229 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 124 components and 0.395229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153477Jy sigma=0.000666 ! Fit after self-cal, rms=0.153472Jy sigma=0.000666 wmodel J1336-1852_S_2017_02_19_pus_map.mod ! Writing 124 model components to file: J1336-1852_S_2017_02_19_pus_map.mod wobs J1336-1852_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1336-1852_S_2017_02_19_pus_uvs.fits wwins J1336-1852_S_2017_02_19_pus_map.win ! wwins: Wrote 3 windows to J1336-1852_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000220683 Jy ! Component: 100 - total flux cleaned = -0.000285332 Jy ! Component: 150 - total flux cleaned = -0.00034807 Jy ! Component: 200 - total flux cleaned = -0.000407487 Jy ! Component: 250 - total flux cleaned = -0.000435985 Jy ! Component: 300 - total flux cleaned = -0.000379791 Jy ! Component: 350 - total flux cleaned = -0.000462507 Jy ! Component: 400 - total flux cleaned = -0.000436104 Jy ! Component: 450 - total flux cleaned = -0.000543135 Jy ! Component: 500 - total flux cleaned = -0.000647378 Jy ! Component: 550 - total flux cleaned = -0.000647218 Jy ! Component: 600 - total flux cleaned = -0.000697895 Jy ! Component: 650 - total flux cleaned = -0.000747951 Jy ! Component: 700 - total flux cleaned = -0.000846126 Jy ! Component: 750 - total flux cleaned = -0.00094299 Jy ! Component: 800 - total flux cleaned = -0.00103864 Jy ! Component: 850 - total flux cleaned = -0.00106208 Jy ! Component: 900 - total flux cleaned = -0.00103874 Jy ! Component: 950 - total flux cleaned = -0.00103857 Jy ! Component: 1000 - total flux cleaned = -0.00117507 Jy ! Component: 1050 - total flux cleaned = -0.00115283 Jy ! Component: 1100 - total flux cleaned = -0.00115324 Jy ! Component: 1150 - total flux cleaned = -0.00126363 Jy ! Component: 1200 - total flux cleaned = -0.00135129 Jy ! Component: 1250 - total flux cleaned = -0.00145936 Jy ! Component: 1300 - total flux cleaned = -0.00141663 Jy ! Component: 1350 - total flux cleaned = -0.00152305 Jy ! Component: 1400 - total flux cleaned = -0.00160757 Jy ! Component: 1450 - total flux cleaned = -0.00164963 Jy ! Component: 1500 - total flux cleaned = -0.00177401 Jy ! Component: 1550 - total flux cleaned = -0.00179435 Jy ! Component: 1600 - total flux cleaned = -0.00185525 Jy ! Component: 1650 - total flux cleaned = -0.0019357 Jy ! Component: 1700 - total flux cleaned = -0.00197571 Jy ! Component: 1750 - total flux cleaned = -0.00193591 Jy ! Component: 1800 - total flux cleaned = -0.00195561 Jy ! Component: 1850 - total flux cleaned = -0.00197513 Jy ! Component: 1900 - total flux cleaned = -0.0020328 Jy ! Component: 1950 - total flux cleaned = -0.00195605 Jy ! Component: 2000 - total flux cleaned = -0.00201293 Jy ! Component: 2050 - total flux cleaned = -0.00197492 Jy ! Component: 2100 - total flux cleaned = -0.00197519 Jy ! Component: 2150 - total flux cleaned = -0.00204946 Jy ! Component: 2200 - total flux cleaned = -0.00204937 Jy ! Component: 2250 - total flux cleaned = -0.00204947 Jy ! Component: 2300 - total flux cleaned = -0.00204942 Jy ! Component: 2350 - total flux cleaned = -0.00213999 Jy ! Component: 2400 - total flux cleaned = -0.00215772 Jy ! Component: 2450 - total flux cleaned = -0.00215754 Jy ! Component: 2500 - total flux cleaned = -0.00224624 Jy ! Component: 2550 - total flux cleaned = -0.00222869 Jy ! Component: 2600 - total flux cleaned = -0.00229855 Jy ! Component: 2650 - total flux cleaned = -0.00233332 Jy ! Component: 2700 - total flux cleaned = -0.00231637 Jy ! Component: 2750 - total flux cleaned = -0.00243649 Jy ! Component: 2800 - total flux cleaned = -0.00241981 Jy ! Component: 2850 - total flux cleaned = -0.00240278 Jy ! Component: 2900 - total flux cleaned = -0.00250364 Jy ! Component: 2950 - total flux cleaned = -0.00247007 Jy ! Component: 3000 - total flux cleaned = -0.00253642 Jy ! Component: 3050 - total flux cleaned = -0.00250341 Jy ! Component: 3100 - total flux cleaned = -0.00253624 Jy ! Component: 3150 - total flux cleaned = -0.00256878 Jy ! Component: 3200 - total flux cleaned = -0.00264986 Jy ! Component: 3250 - total flux cleaned = -0.00264963 Jy ! Component: 3300 - total flux cleaned = -0.00258565 Jy ! Component: 3350 - total flux cleaned = -0.00271321 Jy ! Component: 3400 - total flux cleaned = -0.00268146 Jy ! Component: 3450 - total flux cleaned = -0.00271299 Jy ! Component: 3500 - total flux cleaned = -0.00277572 Jy ! Component: 3550 - total flux cleaned = -0.00282242 Jy ! Component: 3600 - total flux cleaned = -0.00294627 Jy ! Component: 3650 - total flux cleaned = -0.00291558 Jy ! Component: 3700 - total flux cleaned = -0.00297678 Jy ! Component: 3750 - total flux cleaned = -0.00305258 Jy ! Component: 3800 - total flux cleaned = -0.00300713 Jy ! Component: 3850 - total flux cleaned = -0.00308238 Jy ! Component: 3900 - total flux cleaned = -0.00308239 Jy ! Component: 3950 - total flux cleaned = -0.0031568 Jy ! Component: 4000 - total flux cleaned = -0.00315679 Jy ! Component: 4050 - total flux cleaned = -0.00320099 Jy ! Total flux subtracted in 4096 components = -0.00318646 Jy ! Clean residual min=-0.000962 max=0.000874 Jy/beam ! Clean residual mean=0.000002 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.392043 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 404 components and 0.392043 Jy ![Exited script file: muppet] wmap "J1336-1852_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.959 x 7.291 at -2.196 degrees (North through East) ! Clean map min=-0.0013755 max=0.37928 Jy/beam ! Writing clean map to FITS file: J1336-1852_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.379284 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000267002 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.211189 0.211189 0.422378 0.844757 1.68951 3.37903 6.75806 13.5161 27.0322 54.0644 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.379 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.959 x 7.291 at -2.196 degrees (North through East) ! Clean map min=-0.0013755 max=0.37928 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1336-1852_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:52:19 2019