! Started logfile: J1335+0253_X_2017_06_10_pus_uvs.log on Mon May 6 12:47:55 2019 obs J1335+0253_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1335+0253_X_2017_06_10_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.856019 visibilities/baseline/integration-bin. ! Found source: J1335+0253 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 66564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1335+0253_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.921425Jy sigma=0.008342 ! Fit after self-cal, rms=0.909700Jy sigma=0.008245 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8097 mas, bmaj=1.784 mas, bpa=2.496 degrees ! Estimated noise=595.967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0715443 Jy ! Component: 100 - total flux cleaned = 0.0875468 Jy ! Total flux subtracted in 100 components = 0.0875468 Jy ! Clean residual min=-0.003260 max=0.011129 Jy/beam ! Clean residual mean=-0.000022 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.0875468 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0875468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079343Jy sigma=0.000675 ! Fit after self-cal, rms=0.079333Jy sigma=0.000675 ! Inverting map ! Added new window around map position (-1.2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00951546 Jy ! Component: 100 - total flux cleaned = 0.0138529 Jy ! Total flux subtracted in 100 components = 0.0138529 Jy ! Clean residual min=-0.002038 max=0.002689 Jy/beam ! Clean residual mean=-0.000010 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.1014 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.1014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078168Jy sigma=0.000664 ! Fit after self-cal, rms=0.078056Jy sigma=0.000663 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358876 Jy ! Component: 100 - total flux cleaned = 0.00543233 Jy ! Total flux subtracted in 100 components = 0.00543233 Jy ! Clean residual min=-0.001718 max=0.002005 Jy/beam ! Clean residual mean=-0.000005 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.106832 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 0.106832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077865Jy sigma=0.000661 ! Fit after self-cal, rms=0.077851Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9599 mas, bmaj=2.034 mas, bpa=3.835 degrees ! Estimated noise=306.705 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212544 Jy ! Component: 100 - total flux cleaned = 0.00318014 Jy ! Component: 150 - total flux cleaned = 0.00370215 Jy ! Component: 200 - total flux cleaned = 0.00375576 Jy ! Total flux subtracted in 200 components = 0.00375576 Jy ! Clean residual min=-0.000950 max=0.001120 Jy/beam ! Clean residual mean=-0.000001 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.110588 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.110588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077794Jy sigma=0.000660 ! Fit after self-cal, rms=0.077788Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.06 KP 1.00 ! LA 0.99 MK 1.02 NL 1.01 OV 1.04 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.00 KP 0.98 ! LA 0.98 MK 1.00 NL 1.03 OV 0.99 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.99 KP 1.00 ! LA 1.01 MK 1.04 NL 1.00 OV 1.01 ! PT 1.05 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.02 KP 1.02 ! LA 1.02 MK 0.99 NL 1.02 OV 0.99 ! PT 1.04 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.98 KP 1.00 ! LA 1.01 MK 1.01 NL 1.01 OV 1.00 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.01 KP 1.01 ! LA 0.99 MK 1.02 NL 1.03 OV 1.01 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.98 KP 1.02 ! LA 1.03 MK 1.01 NL 1.01 OV 0.99 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.97 KP 1.01 ! LA 0.95 MK 0.96 NL 1.00 OV 1.00 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.00 KP 1.01 ! LA 1.00 MK 0.95 NL 1.01 OV 1.00 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.95 KP 1.01 ! LA 1.02 MK 1.00 NL 1.00 OV 0.99 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 0.99 KP 0.98 ! LA 1.01 MK 0.94 NL 0.99 OV 0.99 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 0.93 KP 0.95 ! LA 1.00 MK 1.07 NL 1.01 OV 0.95 ! PT 1.00 SC 1.01 ! ! ! Fit before self-cal, rms=0.077788Jy sigma=0.000660 ! Fit after self-cal, rms=0.076861Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9604 mas, bmaj=2.033 mas, bpa=3.757 degrees ! Estimated noise=305.853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000385244 Jy ! Component: 100 - total flux cleaned = 0.00038537 Jy ! Component: 150 - total flux cleaned = 0.000386059 Jy ! Component: 200 - total flux cleaned = 0.000386337 Jy ! Total flux subtracted in 200 components = 0.000386337 Jy ! Clean residual min=-0.000832 max=0.001019 Jy/beam ! Clean residual mean=-0.000000 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.110974 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.110974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076857Jy sigma=0.000659 ! Fit after self-cal, rms=0.076852Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076852Jy sigma=0.000659 ! Fit after self-cal, rms=0.076939Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9603 mas, bmaj=2.034 mas, bpa=3.722 degrees ! Estimated noise=305.747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000355877 Jy ! Component: 100 - total flux cleaned = 0.000392451 Jy ! Component: 150 - total flux cleaned = 0.000364362 Jy ! Component: 200 - total flux cleaned = 0.000364225 Jy ! Total flux subtracted in 200 components = 0.000364225 Jy ! Clean residual min=-0.000808 max=0.000908 Jy/beam ! Clean residual mean=-0.000000 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.111338 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.111338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076936Jy sigma=0.000659 ! Fit after self-cal, rms=0.076942Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.8, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000398851 Jy ! Component: 100 - total flux cleaned = 0.000472003 Jy ! Component: 150 - total flux cleaned = 0.000557347 Jy ! Component: 200 - total flux cleaned = 0.00061748 Jy ! Total flux subtracted in 200 components = 0.00061748 Jy ! Clean residual min=-0.000793 max=0.000864 Jy/beam ! Clean residual mean=0.000000 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.111956 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.111956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076932Jy sigma=0.000659 ! Fit after self-cal, rms=0.076931Jy sigma=0.000658 ! Inverting map ! Added new window around map position (-15, 8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000486718 Jy ! Component: 100 - total flux cleaned = 0.000526186 Jy ! Component: 150 - total flux cleaned = 0.000499317 Jy ! Component: 200 - total flux cleaned = 0.000474051 Jy ! Total flux subtracted in 200 components = 0.000474051 Jy ! Clean residual min=-0.000709 max=0.000734 Jy/beam ! Clean residual mean=-0.000000 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.11243 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 0.11243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076921Jy sigma=0.000658 ! Fit after self-cal, rms=0.076919Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076919Jy sigma=0.000658 ! Fit after self-cal, rms=0.077008Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9606 mas, bmaj=2.035 mas, bpa=3.601 degrees ! Estimated noise=306.028 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022 Jy ! Component: 100 - total flux cleaned = 0.000258718 Jy ! Component: 150 - total flux cleaned = 0.000270042 Jy ! Component: 200 - total flux cleaned = 0.000280788 Jy ! Total flux subtracted in 200 components = 0.000280788 Jy ! Clean residual min=-0.000708 max=0.000685 Jy/beam ! Clean residual mean=-0.000000 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.112711 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 90 components and 0.112711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077003Jy sigma=0.000658 ! Fit after self-cal, rms=0.077004Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.57881e-05 Jy ! Component: 100 - total flux cleaned = 6.53059e-05 Jy ! Component: 150 - total flux cleaned = 7.45225e-05 Jy ! Component: 200 - total flux cleaned = 9.16755e-05 Jy ! Total flux subtracted in 200 components = 9.16755e-05 Jy ! Clean residual min=-0.000704 max=0.000692 Jy/beam ! Clean residual mean=-0.000000 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.112802 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 99 components and 0.112802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077002Jy sigma=0.000658 ! Fit after self-cal, rms=0.077001Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077001Jy sigma=0.000658 ! Fit after self-cal, rms=0.077052Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.107 mas, bmaj=3.153 mas, bpa=1.838 degrees ! Estimated noise=382.135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011879 Jy ! Component: 100 - total flux cleaned = 0.000107036 Jy ! Component: 150 - total flux cleaned = 0.000124143 Jy ! Component: 200 - total flux cleaned = 0.000132144 Jy ! Total flux subtracted in 200 components = 0.000132144 Jy ! Clean residual min=-0.000835 max=0.000672 Jy/beam ! Clean residual mean=-0.000001 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.112935 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 111 components and 0.112935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077052Jy sigma=0.000658 ! Fit after self-cal, rms=0.077051Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.04282e-05 Jy ! Component: 100 - total flux cleaned = 5.0536e-05 Jy ! Component: 150 - total flux cleaned = 6.4003e-05 Jy ! Component: 200 - total flux cleaned = 7.62183e-05 Jy ! Total flux subtracted in 200 components = 7.62183e-05 Jy ! Clean residual min=-0.000847 max=0.000665 Jy/beam ! Clean residual mean=-0.000000 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.113011 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 117 components and 0.113011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077051Jy sigma=0.000658 ! Fit after self-cal, rms=0.077051Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9607 mas, bmaj=2.035 mas, bpa=3.545 degrees ! Estimated noise=306.25 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9607 x 2.035 at 3.545 degrees (North through East) ! Clean map min=-0.00071463 max=0.09124 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8105 mas, bmaj=1.785 mas, bpa=2.272 degrees ! Estimated noise=593.533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0709728 Jy ! Component: 100 - total flux cleaned = 0.0896754 Jy ! Component: 150 - total flux cleaned = 0.0985548 Jy ! Component: 200 - total flux cleaned = 0.103217 Jy ! Total flux subtracted in 200 components = 0.103217 Jy ! Clean residual min=-0.001823 max=0.002334 Jy/beam ! Clean residual mean=-0.000009 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.103217 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.103217 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9607 mas, bmaj=2.035 mas, bpa=3.545 degrees ! Estimated noise=306.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376157 Jy ! Component: 100 - total flux cleaned = 0.00574274 Jy ! Component: 150 - total flux cleaned = 0.00703286 Jy ! Component: 200 - total flux cleaned = 0.00781254 Jy ! Total flux subtracted in 200 components = 0.00781254 Jy ! Clean residual min=-0.000803 max=0.000964 Jy/beam ! Clean residual mean=-0.000002 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.11103 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 36 components and 0.11103 Jy ! Inverting map ! Added new window around map position (-2.4, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000728931 Jy ! Component: 100 - total flux cleaned = 0.00106534 Jy ! Component: 150 - total flux cleaned = 0.0012588 Jy ! Component: 200 - total flux cleaned = 0.0014311 Jy ! Total flux subtracted in 200 components = 0.0014311 Jy ! Clean residual min=-0.000752 max=0.000733 Jy/beam ! Clean residual mean=-0.000001 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.112461 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 56 components and 0.112461 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.107 mas, bmaj=3.153 mas, bpa=1.838 degrees ! Estimated noise=382.135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167264 Jy ! Component: 100 - total flux cleaned = 0.000186032 Jy ! Component: 150 - total flux cleaned = 0.000235787 Jy ! Component: 200 - total flux cleaned = 0.000264464 Jy ! Total flux subtracted in 200 components = 0.000264464 Jy ! Clean residual min=-0.000806 max=0.000727 Jy/beam ! Clean residual mean=-0.000001 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.112726 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.80686e-05 Jy ! Component: 100 - total flux cleaned = 4.95385e-05 Jy ! Component: 150 - total flux cleaned = 6.02508e-05 Jy ! Component: 200 - total flux cleaned = 7.88333e-05 Jy ! Total flux subtracted in 200 components = 7.88333e-05 Jy ! Clean residual min=-0.000804 max=0.000697 Jy/beam ! Clean residual mean=-0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.112804 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 89 components and 0.112804 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9607 mas, bmaj=2.035 mas, bpa=3.545 degrees ! Estimated noise=306.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195703 Jy ! Component: 100 - total flux cleaned = 0.000209526 Jy ! Component: 150 - total flux cleaned = 0.000222686 Jy ! Component: 200 - total flux cleaned = 0.000198356 Jy ! Total flux subtracted in 200 components = 0.000198356 Jy ! Clean residual min=-0.000700 max=0.000746 Jy/beam ! Clean residual mean=-0.000000 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.113003 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 110 components and 0.113003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077054Jy sigma=0.000658 ! Fit after self-cal, rms=0.077055Jy sigma=0.000658 wmodel J1335+0253_X_2017_06_10_pus_map.mod ! Writing 110 model components to file: J1335+0253_X_2017_06_10_pus_map.mod wobs J1335+0253_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1335+0253_X_2017_06_10_pus_uvs.fits wwins J1335+0253_X_2017_06_10_pus_map.win ! wwins: Wrote 5 windows to J1335+0253_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.31394e-05 Jy ! Component: 100 - total flux cleaned = 0.000130296 Jy ! Component: 150 - total flux cleaned = 0.000164569 Jy ! Component: 200 - total flux cleaned = 0.000175395 Jy ! Component: 250 - total flux cleaned = 0.000239383 Jy ! Component: 300 - total flux cleaned = 0.000270364 Jy ! Component: 350 - total flux cleaned = 0.000280797 Jy ! Component: 400 - total flux cleaned = 0.000310885 Jy ! Component: 450 - total flux cleaned = 0.000330249 Jy ! Component: 500 - total flux cleaned = 0.00034932 Jy ! Component: 550 - total flux cleaned = 0.000349442 Jy ! Component: 600 - total flux cleaned = 0.000349556 Jy ! Component: 650 - total flux cleaned = 0.000358641 Jy ! Component: 700 - total flux cleaned = 0.000358656 Jy ! Component: 750 - total flux cleaned = 0.000358826 Jy ! Component: 800 - total flux cleaned = 0.000384668 Jy ! Component: 850 - total flux cleaned = 0.000393046 Jy ! Component: 900 - total flux cleaned = 0.000409618 Jy ! Component: 950 - total flux cleaned = 0.00041796 Jy ! Component: 1000 - total flux cleaned = 0.000450413 Jy ! Component: 1050 - total flux cleaned = 0.000466224 Jy ! Component: 1100 - total flux cleaned = 0.000450352 Jy ! Component: 1150 - total flux cleaned = 0.000442753 Jy ! Component: 1200 - total flux cleaned = 0.000504839 Jy ! Component: 1250 - total flux cleaned = 0.000527829 Jy ! Component: 1300 - total flux cleaned = 0.000527792 Jy ! Component: 1350 - total flux cleaned = 0.000557813 Jy ! Component: 1400 - total flux cleaned = 0.000572526 Jy ! Component: 1450 - total flux cleaned = 0.000579969 Jy ! Component: 1500 - total flux cleaned = 0.000609098 Jy ! Component: 1550 - total flux cleaned = 0.000637887 Jy ! Component: 1600 - total flux cleaned = 0.000652062 Jy ! Component: 1650 - total flux cleaned = 0.000666243 Jy ! Component: 1700 - total flux cleaned = 0.000680259 Jy ! Component: 1750 - total flux cleaned = 0.000645621 Jy ! Component: 1800 - total flux cleaned = 0.000700781 Jy ! Component: 1850 - total flux cleaned = 0.000694015 Jy ! Component: 1900 - total flux cleaned = 0.000693979 Jy ! Component: 1950 - total flux cleaned = 0.00069399 Jy ! Component: 2000 - total flux cleaned = 0.000700725 Jy ! Total flux subtracted in 2048 components = 0.0006942 Jy ! Clean residual min=-0.000426 max=0.000354 Jy/beam ! Clean residual mean=-0.000000 rms=0.000123 Jy/beam ! Combined flux in latest and established models = 0.113697 Jy keep ! Adding 146 model components to the UV plane model. ! The established model now contains 256 components and 0.113697 Jy ![Exited script file: muppet] wmap "J1335+0253_X_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9607 x 2.035 at 3.545 degrees (North through East) ! Clean map min=-0.00054195 max=0.091364 Jy/beam ! Writing clean map to FITS file: J1335+0253_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0913642 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000123187 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.404494 0.404494 0.808987 1.61797 3.23595 6.4719 12.9438 25.8876 51.7752 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.091 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9607 x 2.035 at 3.545 degrees (North through East) ! Clean map min=-0.00054195 max=0.091364 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1335+0253_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:47:59 2019