! Started logfile: J1333-1112_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:14:36 2019 obs J1333-1112_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1333-1112_S_2017_01_16_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.777973 visibilities/baseline/integration-bin. ! Found source: J1333-1112 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 15964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1333-1112_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 256 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.921197Jy sigma=0.006762 ! Fit after self-cal, rms=0.903784Jy sigma=0.006682 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=9.913 mas, bpa=16.7 degrees ! Estimated noise=1161.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0786382 Jy ! Component: 100 - total flux cleaned = 0.095901 Jy ! Total flux subtracted in 100 components = 0.095901 Jy ! Clean residual min=-0.004121 max=0.006058 Jy/beam ! Clean residual mean=-0.000015 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.095901 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.095901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111868Jy sigma=0.000672 ! Fit after self-cal, rms=0.111854Jy sigma=0.000672 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.031 mas, bmaj=11.11 mas, bpa=14.99 degrees ! Estimated noise=802.289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00746501 Jy ! Component: 100 - total flux cleaned = 0.0117029 Jy ! Component: 150 - total flux cleaned = 0.0147084 Jy ! Component: 200 - total flux cleaned = 0.0168994 Jy ! Total flux subtracted in 200 components = 0.0168994 Jy ! Clean residual min=-0.002438 max=0.002684 Jy/beam ! Clean residual mean=0.000002 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.1128 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 45 components and 0.1128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111222Jy sigma=0.000668 ! Fit after self-cal, rms=0.111207Jy sigma=0.000667 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.93 HN 1.01 KP 1.06 ! LA 1.01 MK 1.00* NL 0.95 OV 1.02 ! PT 0.98 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.06 KP 1.02 ! LA 1.00 MK 1.00* NL 1.05 OV 1.06 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 1.00 KP 1.03 ! LA 1.02 MK 1.00* NL 1.05 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.94 KP 0.98 ! LA 0.78 MK 1.00* NL 1.00* OV 0.90 ! PT 0.93 SC 1.04 ! ! ! Fit before self-cal, rms=0.111207Jy sigma=0.000667 ! Fit after self-cal, rms=0.105358Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.038 mas, bmaj=11.16 mas, bpa=14.9 degrees ! Estimated noise=797.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144607 Jy ! Component: 100 - total flux cleaned = 0.00194924 Jy ! Component: 150 - total flux cleaned = 0.00204046 Jy ! Component: 200 - total flux cleaned = 0.00206763 Jy ! Total flux subtracted in 200 components = 0.00206763 Jy ! Clean residual min=-0.002247 max=0.002264 Jy/beam ! Clean residual mean=0.000008 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.114868 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.114868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105332Jy sigma=0.000664 ! Fit after self-cal, rms=0.105335Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105335Jy sigma=0.000664 ! Fit after self-cal, rms=0.104719Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.03 mas, bmaj=11.14 mas, bpa=14.92 degrees ! Estimated noise=799.815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000928849 Jy ! Component: 100 - total flux cleaned = 0.00101943 Jy ! Component: 150 - total flux cleaned = 0.00104438 Jy ! Component: 200 - total flux cleaned = 0.00104449 Jy ! Total flux subtracted in 200 components = 0.00104449 Jy ! Clean residual min=-0.002050 max=0.002161 Jy/beam ! Clean residual mean=0.000007 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.115912 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 85 components and 0.115912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104703Jy sigma=0.000662 ! Fit after self-cal, rms=0.104714Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268293 Jy ! Component: 100 - total flux cleaned = 0.000224615 Jy ! Component: 150 - total flux cleaned = 0.000143473 Jy ! Component: 200 - total flux cleaned = 8.71613e-05 Jy ! Total flux subtracted in 200 components = 8.71613e-05 Jy ! Clean residual min=-0.002024 max=0.002143 Jy/beam ! Clean residual mean=0.000007 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.116 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 0.116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104707Jy sigma=0.000662 ! Fit after self-cal, rms=0.104710Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104710Jy sigma=0.000662 ! Fit after self-cal, rms=0.103855Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.027 mas, bmaj=11.13 mas, bpa=14.91 degrees ! Estimated noise=798.779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002392 Jy ! Component: 100 - total flux cleaned = 0.00028601 Jy ! Component: 150 - total flux cleaned = 0.000247929 Jy ! Component: 200 - total flux cleaned = 0.000212517 Jy ! Total flux subtracted in 200 components = 0.000212517 Jy ! Clean residual min=-0.001984 max=0.002030 Jy/beam ! Clean residual mean=0.000005 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.116212 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 105 components and 0.116212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103848Jy sigma=0.000662 ! Fit after self-cal, rms=0.103858Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.35244e-05 Jy ! Component: 100 - total flux cleaned = 9.38106e-05 Jy ! Component: 150 - total flux cleaned = 4.47358e-05 Jy ! Component: 200 - total flux cleaned = -1.05988e-06 Jy ! Total flux subtracted in 200 components = -1.05988e-06 Jy ! Clean residual min=-0.001959 max=0.002040 Jy/beam ! Clean residual mean=0.000005 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.116211 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 107 components and 0.116211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103853Jy sigma=0.000662 ! Fit after self-cal, rms=0.103855Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103855Jy sigma=0.000662 ! Fit after self-cal, rms=0.103755Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.951 mas, bmaj=14.97 mas, bpa=5.913 degrees ! Estimated noise=934.438 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433081 Jy ! Component: 100 - total flux cleaned = 0.000489302 Jy ! Component: 150 - total flux cleaned = 0.000504362 Jy ! Component: 200 - total flux cleaned = 0.000503806 Jy ! Total flux subtracted in 200 components = 0.000503806 Jy ! Clean residual min=-0.002341 max=0.001859 Jy/beam ! Clean residual mean=0.000006 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.116715 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 126 components and 0.116715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103754Jy sigma=0.000662 ! Fit after self-cal, rms=0.103757Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182066 Jy ! Component: 100 - total flux cleaned = 0.000182582 Jy ! Component: 150 - total flux cleaned = 0.000195258 Jy ! Component: 200 - total flux cleaned = 0.000205957 Jy ! Total flux subtracted in 200 components = 0.000205957 Jy ! Clean residual min=-0.002342 max=0.001852 Jy/beam ! Clean residual mean=0.000006 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.116921 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 0.116921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103758Jy sigma=0.000662 ! Fit after self-cal, rms=0.103758Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.026 mas, bmaj=11.12 mas, bpa=14.89 degrees ! Estimated noise=797.986 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.026 x 11.12 at 14.89 degrees (North through East) ! Clean map min=-0.00198 max=0.098533 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=9.897 mas, bpa=16.58 degrees ! Estimated noise=1146.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0774011 Jy ! Component: 100 - total flux cleaned = 0.0950349 Jy ! Component: 150 - total flux cleaned = 0.102539 Jy ! Component: 200 - total flux cleaned = 0.107004 Jy ! Total flux subtracted in 200 components = 0.107004 Jy ! Clean residual min=-0.003313 max=0.003043 Jy/beam ! Clean residual mean=-0.000003 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.107004 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.107004 Jy ! Inverting map and beam ! Estimated beam: bmin=4.026 mas, bmaj=11.12 mas, bpa=14.89 degrees ! Estimated noise=797.986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003558 Jy ! Component: 100 - total flux cleaned = 0.00568083 Jy ! Component: 150 - total flux cleaned = 0.00718012 Jy ! Component: 200 - total flux cleaned = 0.00779652 Jy ! Total flux subtracted in 200 components = 0.00779652 Jy ! Clean residual min=-0.002147 max=0.001870 Jy/beam ! Clean residual mean=0.000003 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.1148 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 58 components and 0.1148 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.951 mas, bmaj=14.97 mas, bpa=5.913 degrees ! Estimated noise=934.438 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117165 Jy ! Component: 100 - total flux cleaned = 0.00145492 Jy ! Component: 150 - total flux cleaned = 0.00162758 Jy ! Component: 200 - total flux cleaned = 0.00171049 Jy ! Total flux subtracted in 200 components = 0.00171049 Jy ! Clean residual min=-0.002433 max=0.001792 Jy/beam ! Clean residual mean=0.000006 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.116511 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.09541e-05 Jy ! Component: 100 - total flux cleaned = 0.000173669 Jy ! Component: 150 - total flux cleaned = 0.000233813 Jy ! Component: 200 - total flux cleaned = 0.000275266 Jy ! Total flux subtracted in 200 components = 0.000275266 Jy ! Clean residual min=-0.002416 max=0.001819 Jy/beam ! Clean residual mean=0.000006 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.116786 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 83 components and 0.116786 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.026 mas, bmaj=11.12 mas, bpa=14.89 degrees ! Estimated noise=797.986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000464991 Jy ! Component: 100 - total flux cleaned = -0.000441032 Jy ! Component: 150 - total flux cleaned = -0.000419212 Jy ! Component: 200 - total flux cleaned = -0.000379557 Jy ! Total flux subtracted in 200 components = -0.000379557 Jy ! Clean residual min=-0.002009 max=0.001996 Jy/beam ! Clean residual mean=0.000003 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.116406 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 0.116406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103761Jy sigma=0.000662 ! Fit after self-cal, rms=0.103751Jy sigma=0.000662 wmodel J1333-1112_S_2017_01_16_pus_map.mod ! Writing 101 model components to file: J1333-1112_S_2017_01_16_pus_map.mod wobs J1333-1112_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1333-1112_S_2017_01_16_pus_uvs.fits wwins J1333-1112_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J1333-1112_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248759 Jy ! Component: 100 - total flux cleaned = -0.000248449 Jy ! Component: 150 - total flux cleaned = -0.000153131 Jy ! Component: 200 - total flux cleaned = 2.85414e-05 Jy ! Component: 250 - total flux cleaned = 0.000173799 Jy ! Component: 300 - total flux cleaned = 0.000313926 Jy ! Component: 350 - total flux cleaned = 0.000396036 Jy ! Component: 400 - total flux cleaned = 0.000449141 Jy ! Component: 450 - total flux cleaned = 0.000475503 Jy ! Component: 500 - total flux cleaned = 0.000501067 Jy ! Component: 550 - total flux cleaned = 0.000551136 Jy ! Component: 600 - total flux cleaned = 0.000721906 Jy ! Component: 650 - total flux cleaned = 0.000889242 Jy ! Component: 700 - total flux cleaned = 0.0009363 Jy ! Component: 750 - total flux cleaned = 0.0011448 Jy ! Component: 800 - total flux cleaned = 0.00125833 Jy ! Component: 850 - total flux cleaned = 0.00137031 Jy ! Component: 900 - total flux cleaned = 0.00148083 Jy ! Component: 950 - total flux cleaned = 0.0016546 Jy ! Component: 1000 - total flux cleaned = 0.00169718 Jy ! Component: 1050 - total flux cleaned = 0.00171853 Jy ! Component: 1100 - total flux cleaned = 0.00178123 Jy ! Component: 1150 - total flux cleaned = 0.00184269 Jy ! Component: 1200 - total flux cleaned = 0.00186258 Jy ! Component: 1250 - total flux cleaned = 0.00188306 Jy ! Component: 1300 - total flux cleaned = 0.00190273 Jy ! Component: 1350 - total flux cleaned = 0.00192274 Jy ! Component: 1400 - total flux cleaned = 0.00196161 Jy ! Component: 1450 - total flux cleaned = 0.00196146 Jy ! Component: 1500 - total flux cleaned = 0.00199976 Jy ! Component: 1550 - total flux cleaned = 0.00194308 Jy ! Component: 1600 - total flux cleaned = 0.00198051 Jy ! Component: 1650 - total flux cleaned = 0.00205459 Jy ! Component: 1700 - total flux cleaned = 0.00203604 Jy ! Component: 1750 - total flux cleaned = 0.00209069 Jy ! Component: 1800 - total flux cleaned = 0.00214492 Jy ! Component: 1850 - total flux cleaned = 0.00218056 Jy ! Component: 1900 - total flux cleaned = 0.00219836 Jy ! Component: 1950 - total flux cleaned = 0.00221592 Jy ! Component: 2000 - total flux cleaned = 0.00228557 Jy ! Component: 2050 - total flux cleaned = 0.00226833 Jy ! Component: 2100 - total flux cleaned = 0.0023195 Jy ! Component: 2150 - total flux cleaned = 0.00223502 Jy ! Component: 2200 - total flux cleaned = 0.00228543 Jy ! Component: 2250 - total flux cleaned = 0.00230224 Jy ! Component: 2300 - total flux cleaned = 0.00231881 Jy ! Component: 2350 - total flux cleaned = 0.00243326 Jy ! Component: 2400 - total flux cleaned = 0.00241675 Jy ! Component: 2450 - total flux cleaned = 0.00243273 Jy ! Component: 2500 - total flux cleaned = 0.00243305 Jy ! Component: 2550 - total flux cleaned = 0.00246491 Jy ! Component: 2600 - total flux cleaned = 0.0025276 Jy ! Component: 2650 - total flux cleaned = 0.00255892 Jy ! Component: 2700 - total flux cleaned = 0.00262062 Jy ! Component: 2750 - total flux cleaned = 0.00259 Jy ! Component: 2800 - total flux cleaned = 0.00262051 Jy ! Component: 2850 - total flux cleaned = 0.0026357 Jy ! Component: 2900 - total flux cleaned = 0.00269548 Jy ! Component: 2950 - total flux cleaned = 0.00265084 Jy ! Component: 3000 - total flux cleaned = 0.00266562 Jy ! Component: 3050 - total flux cleaned = 0.00268022 Jy ! Component: 3100 - total flux cleaned = 0.00268032 Jy ! Component: 3150 - total flux cleaned = 0.00270909 Jy ! Component: 3200 - total flux cleaned = 0.00266619 Jy ! Component: 3250 - total flux cleaned = 0.00270888 Jy ! Component: 3300 - total flux cleaned = 0.00270895 Jy ! Component: 3350 - total flux cleaned = 0.0027089 Jy ! Component: 3400 - total flux cleaned = 0.00272291 Jy ! Component: 3450 - total flux cleaned = 0.00269529 Jy ! Component: 3500 - total flux cleaned = 0.00273634 Jy ! Component: 3550 - total flux cleaned = 0.00270899 Jy ! Component: 3600 - total flux cleaned = 0.00273594 Jy ! Component: 3650 - total flux cleaned = 0.00269562 Jy ! Component: 3700 - total flux cleaned = 0.00272225 Jy ! Component: 3750 - total flux cleaned = 0.0027486 Jy ! Component: 3800 - total flux cleaned = 0.00273548 Jy ! Component: 3850 - total flux cleaned = 0.00273542 Jy ! Component: 3900 - total flux cleaned = 0.00270949 Jy ! Component: 3950 - total flux cleaned = 0.00269651 Jy ! Component: 4000 - total flux cleaned = 0.00265802 Jy ! Component: 4050 - total flux cleaned = 0.00264528 Jy ! Total flux subtracted in 4096 components = 0.00261989 Jy ! Clean residual min=-0.000753 max=0.000673 Jy/beam ! Clean residual mean=-0.000002 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.119026 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 389 components and 0.119026 Jy ![Exited script file: muppet] wmap "J1333-1112_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.026 x 11.12 at 14.89 degrees (North through East) ! Clean map min=-0.001608 max=0.098965 Jy/beam ! Writing clean map to FITS file: J1333-1112_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.098965 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246097 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.746011 0.746011 1.49202 2.98404 5.96809 11.9362 23.8724 47.7447 95.4894 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.026 x 11.12 at 14.89 degrees (North through East) ! Clean map min=-0.001608 max=0.098965 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1333-1112_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:14:41 2019