! Started logfile: J1333+0652_X_2017_06_10_pus_uvs.log on Mon May 6 12:47:48 2019 obs J1333+0652_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1333+0652_X_2017_06_10_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.840741 visibilities/baseline/integration-bin. ! Found source: J1333+0652 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 38136 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1333+0652_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.912226Jy sigma=0.008341 ! Fit after self-cal, rms=0.906488Jy sigma=0.008294 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7876 mas, bmaj=1.735 mas, bpa=1.637 degrees ! Estimated noise=730.239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0698389 Jy ! Component: 100 - total flux cleaned = 0.0922529 Jy ! Total flux subtracted in 100 components = 0.0922529 Jy ! Clean residual min=-0.003588 max=0.010475 Jy/beam ! Clean residual mean=-0.000017 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.0922529 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0922529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079092Jy sigma=0.000690 ! Fit after self-cal, rms=0.079051Jy sigma=0.000689 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120233 Jy ! Component: 100 - total flux cleaned = 0.0183872 Jy ! Total flux subtracted in 100 components = 0.0183872 Jy ! Clean residual min=-0.002405 max=0.004008 Jy/beam ! Clean residual mean=-0.000007 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.11064 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 0.11064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076806Jy sigma=0.000666 ! Fit after self-cal, rms=0.076791Jy sigma=0.000666 ! Inverting map ! Added new window around map position (-1.2, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444515 Jy ! Component: 100 - total flux cleaned = 0.00719569 Jy ! Total flux subtracted in 100 components = 0.00719569 Jy ! Clean residual min=-0.002064 max=0.001930 Jy/beam ! Clean residual mean=-0.000004 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.117836 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 0.117836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076451Jy sigma=0.000662 ! Fit after self-cal, rms=0.076440Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9575 mas, bmaj=1.999 mas, bpa=3.251 degrees ! Estimated noise=399.007 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324541 Jy ! Component: 100 - total flux cleaned = 0.00511261 Jy ! Component: 150 - total flux cleaned = 0.00634531 Jy ! Component: 200 - total flux cleaned = 0.00693555 Jy ! Total flux subtracted in 200 components = 0.00693555 Jy ! Clean residual min=-0.001203 max=0.001276 Jy/beam ! Clean residual mean=-0.000003 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.124771 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 50 components and 0.124771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076297Jy sigma=0.000661 ! Fit after self-cal, rms=0.076298Jy sigma=0.000661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.06 KP 1.02 ! LA 0.97 MK 0.93 NL 0.98 OV 1.00 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 0.97 KP 0.98 ! LA 0.98 MK 1.03 NL 0.97 OV 1.00 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.01 KP 0.98 ! LA 1.00 MK 1.03 NL 0.98 OV 0.99 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.00 KP 0.97 ! LA 1.01 MK 0.97 NL 0.97 OV 0.99 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.99 KP 0.96 ! LA 0.97 MK 1.04 NL 0.97 OV 1.02 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.03 KP 0.98 ! LA 1.03 MK 0.96 NL 0.95 OV 0.99 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.09 KP 0.99 ! LA 0.99 MK 1.06 NL 0.97 OV 0.99 ! PT 1.03 SC 1.09 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 0.95 KP 1.04 ! LA 0.99 MK 1.04 NL 0.98 OV 1.01 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.00 KP 1.00 ! LA 0.99 MK 1.01 NL 0.99 OV 1.00 ! PT 1.04 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 0.99 ! LA 1.00 MK 1.03 NL 0.94 OV 1.05 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.98 KP 1.03 ! LA 1.00 MK 0.95 NL 0.97 OV 0.99 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.96 KP 0.92 ! LA 1.01 MK 1.16 NL 0.96 OV 1.01 ! PT 1.10 SC 0.96 ! ! ! Fit before self-cal, rms=0.076298Jy sigma=0.000661 ! Fit after self-cal, rms=0.076416Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9616 mas, bmaj=2.005 mas, bpa=3.2 degrees ! Estimated noise=397.732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000518194 Jy ! Component: 100 - total flux cleaned = 0.000769985 Jy ! Component: 150 - total flux cleaned = 0.000885676 Jy ! Component: 200 - total flux cleaned = 0.00100139 Jy ! Total flux subtracted in 200 components = 0.00100139 Jy ! Clean residual min=-0.000941 max=0.000961 Jy/beam ! Clean residual mean=-0.000003 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.125773 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.125773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076405Jy sigma=0.000660 ! Fit after self-cal, rms=0.076421Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076421Jy sigma=0.000660 ! Fit after self-cal, rms=0.077124Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9606 mas, bmaj=2.003 mas, bpa=3.125 degrees ! Estimated noise=397.829 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330551 Jy ! Component: 100 - total flux cleaned = 0.000439977 Jy ! Component: 150 - total flux cleaned = 0.000544965 Jy ! Component: 200 - total flux cleaned = 0.000645581 Jy ! Total flux subtracted in 200 components = 0.000645581 Jy ! Clean residual min=-0.000787 max=0.000891 Jy/beam ! Clean residual mean=-0.000001 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.126418 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 75 components and 0.126418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077119Jy sigma=0.000658 ! Fit after self-cal, rms=0.077131Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.5898e-05 Jy ! Component: 100 - total flux cleaned = 5.78975e-05 Jy ! Component: 150 - total flux cleaned = 6.72949e-05 Jy ! Component: 200 - total flux cleaned = 7.64932e-05 Jy ! Total flux subtracted in 200 components = 7.64932e-05 Jy ! Clean residual min=-0.000792 max=0.000874 Jy/beam ! Clean residual mean=-0.000001 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.126495 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.126495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077128Jy sigma=0.000658 ! Fit after self-cal, rms=0.077128Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077128Jy sigma=0.000658 ! Fit after self-cal, rms=0.077202Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9598 mas, bmaj=2.002 mas, bpa=3.048 degrees ! Estimated noise=397.951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023604 Jy ! Component: 100 - total flux cleaned = 0.000316642 Jy ! Component: 150 - total flux cleaned = 0.000369426 Jy ! Component: 200 - total flux cleaned = 0.000401571 Jy ! Total flux subtracted in 200 components = 0.000401571 Jy ! Clean residual min=-0.000766 max=0.000858 Jy/beam ! Clean residual mean=-0.000001 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.126896 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 0.126896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077199Jy sigma=0.000658 ! Fit after self-cal, rms=0.077200Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.81015e-05 Jy ! Component: 100 - total flux cleaned = 1.82065e-05 Jy ! Component: 150 - total flux cleaned = 1.80532e-05 Jy ! Component: 200 - total flux cleaned = 3.18239e-05 Jy ! Total flux subtracted in 200 components = 3.18239e-05 Jy ! Clean residual min=-0.000772 max=0.000846 Jy/beam ! Clean residual mean=-0.000001 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.126928 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 91 components and 0.126928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077198Jy sigma=0.000658 ! Fit after self-cal, rms=0.077198Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077198Jy sigma=0.000658 ! Fit after self-cal, rms=0.077186Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.097 mas, bmaj=3.04 mas, bpa=0.2876 degrees ! Estimated noise=495.874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293085 Jy ! Component: 100 - total flux cleaned = 0.000351596 Jy ! Component: 150 - total flux cleaned = 0.000366919 Jy ! Component: 200 - total flux cleaned = 0.00036233 Jy ! Total flux subtracted in 200 components = 0.00036233 Jy ! Clean residual min=-0.000823 max=0.000933 Jy/beam ! Clean residual mean=-0.000002 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.12729 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 106 components and 0.127291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077185Jy sigma=0.000658 ! Fit after self-cal, rms=0.077185Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.42411e-05 Jy ! Component: 100 - total flux cleaned = 1.42908e-05 Jy ! Component: 150 - total flux cleaned = 9.66036e-06 Jy ! Component: 200 - total flux cleaned = 1.1562e-06 Jy ! Total flux subtracted in 200 components = 1.1562e-06 Jy ! Clean residual min=-0.000829 max=0.000942 Jy/beam ! Clean residual mean=-0.000002 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.127292 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.127292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077184Jy sigma=0.000658 ! Fit after self-cal, rms=0.077184Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9594 mas, bmaj=2.001 mas, bpa=2.991 degrees ! Estimated noise=398.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9594 x 2.001 at 2.991 degrees (North through East) ! Clean map min=-0.00077574 max=0.093651 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7895 mas, bmaj=1.74 mas, bpa=1.389 degrees ! Estimated noise=729.013 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0692837 Jy ! Component: 100 - total flux cleaned = 0.0922927 Jy ! Component: 150 - total flux cleaned = 0.104303 Jy ! Component: 200 - total flux cleaned = 0.111338 Jy ! Total flux subtracted in 200 components = 0.111338 Jy ! Clean residual min=-0.001953 max=0.003613 Jy/beam ! Clean residual mean=-0.000006 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.111338 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.111338 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9594 mas, bmaj=2.001 mas, bpa=2.991 degrees ! Estimated noise=398.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00610312 Jy ! Component: 100 - total flux cleaned = 0.00943335 Jy ! Component: 150 - total flux cleaned = 0.0115194 Jy ! Component: 200 - total flux cleaned = 0.0129546 Jy ! Total flux subtracted in 200 components = 0.0129546 Jy ! Clean residual min=-0.000970 max=0.000972 Jy/beam ! Clean residual mean=-0.000004 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.124292 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 43 components and 0.124292 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.097 mas, bmaj=3.04 mas, bpa=0.2876 degrees ! Estimated noise=495.874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151624 Jy ! Component: 100 - total flux cleaned = 0.00208639 Jy ! Component: 150 - total flux cleaned = 0.00234586 Jy ! Component: 200 - total flux cleaned = 0.00252917 Jy ! Total flux subtracted in 200 components = 0.00252917 Jy ! Clean residual min=-0.000876 max=0.000887 Jy/beam ! Clean residual mean=-0.000003 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.126821 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123875 Jy ! Component: 100 - total flux cleaned = 0.000222755 Jy ! Component: 150 - total flux cleaned = 0.000302553 Jy ! Component: 200 - total flux cleaned = 0.000342716 Jy ! Total flux subtracted in 200 components = 0.000342716 Jy ! Clean residual min=-0.000837 max=0.000930 Jy/beam ! Clean residual mean=-0.000003 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.127164 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 82 components and 0.127164 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9594 mas, bmaj=2.001 mas, bpa=2.991 degrees ! Estimated noise=398.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144754 Jy ! Component: 100 - total flux cleaned = 0.000144522 Jy ! Component: 150 - total flux cleaned = 0.000168858 Jy ! Component: 200 - total flux cleaned = 0.000180453 Jy ! Total flux subtracted in 200 components = 0.000180453 Jy ! Clean residual min=-0.000813 max=0.000846 Jy/beam ! Clean residual mean=-0.000001 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.127345 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 0.127345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077189Jy sigma=0.000658 ! Fit after self-cal, rms=0.077191Jy sigma=0.000658 wmodel J1333+0652_X_2017_06_10_pus_map.mod ! Writing 95 model components to file: J1333+0652_X_2017_06_10_pus_map.mod wobs J1333+0652_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1333+0652_X_2017_06_10_pus_uvs.fits wwins J1333+0652_X_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J1333+0652_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208645 Jy ! Component: 100 - total flux cleaned = 0.000193974 Jy ! Component: 150 - total flux cleaned = 0.000249135 Jy ! Component: 200 - total flux cleaned = 0.000342291 Jy ! Component: 250 - total flux cleaned = 0.000393984 Jy ! Component: 300 - total flux cleaned = 0.000456852 Jy ! Component: 350 - total flux cleaned = 0.000481406 Jy ! Component: 400 - total flux cleaned = 0.000505385 Jy ! Component: 450 - total flux cleaned = 0.000528436 Jy ! Component: 500 - total flux cleaned = 0.000493824 Jy ! Component: 550 - total flux cleaned = 0.000539144 Jy ! Component: 600 - total flux cleaned = 0.000539225 Jy ! Component: 650 - total flux cleaned = 0.000561224 Jy ! Component: 700 - total flux cleaned = 0.000582759 Jy ! Component: 750 - total flux cleaned = 0.00062514 Jy ! Component: 800 - total flux cleaned = 0.000625313 Jy ! Component: 850 - total flux cleaned = 0.00065631 Jy ! Component: 900 - total flux cleaned = 0.000656107 Jy ! Component: 950 - total flux cleaned = 0.000696127 Jy ! Component: 1000 - total flux cleaned = 0.000666239 Jy ! Component: 1050 - total flux cleaned = 0.000676099 Jy ! Component: 1100 - total flux cleaned = 0.0006567 Jy ! Component: 1150 - total flux cleaned = 0.000647224 Jy ! Component: 1200 - total flux cleaned = 0.000666038 Jy ! Component: 1250 - total flux cleaned = 0.000601013 Jy ! Component: 1300 - total flux cleaned = 0.000610403 Jy ! Component: 1350 - total flux cleaned = 0.000601396 Jy ! Component: 1400 - total flux cleaned = 0.000610287 Jy ! Component: 1450 - total flux cleaned = 0.000592279 Jy ! Component: 1500 - total flux cleaned = 0.000548178 Jy ! Component: 1550 - total flux cleaned = 0.000539551 Jy ! Component: 1600 - total flux cleaned = 0.000548108 Jy ! Component: 1650 - total flux cleaned = 0.000539611 Jy ! Component: 1700 - total flux cleaned = 0.000522743 Jy ! Component: 1750 - total flux cleaned = 0.00052267 Jy ! Component: 1800 - total flux cleaned = 0.000547382 Jy ! Component: 1850 - total flux cleaned = 0.000530928 Jy ! Component: 1900 - total flux cleaned = 0.000538902 Jy ! Component: 1950 - total flux cleaned = 0.000554959 Jy ! Component: 2000 - total flux cleaned = 0.00057882 Jy ! Total flux subtracted in 2048 components = 0.000555091 Jy ! Clean residual min=-0.000448 max=0.000470 Jy/beam ! Clean residual mean=-0.000001 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.1279 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 237 components and 0.1279 Jy ![Exited script file: muppet] wmap "J1333+0652_X_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9594 x 2.001 at 2.991 degrees (North through East) ! Clean map min=-0.00082714 max=0.093547 Jy/beam ! Writing clean map to FITS file: J1333+0652_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0935467 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000149126 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.478242 0.478242 0.956484 1.91297 3.82593 7.65187 15.3037 30.6075 61.215 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.093 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9594 x 2.001 at 2.991 degrees (North through East) ! Clean map min=-0.00082714 max=0.093547 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1333+0652_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:47:51 2019