! Started logfile: J1332+0719_S_2017_09_26_pus_uvs.log on Sat May 11 13:01:49 2019 obs J1332+0719_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1332+0719_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.665533 visibilities/baseline/integration-bin. ! Found source: J1332+0719 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 28176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1332+0719_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 544 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 692 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 587 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1788 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002185Jy sigma=0.008517 ! Fit after self-cal, rms=0.956720Jy sigma=0.008152 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.866 mas, bmaj=13.66 mas, bpa=-17.6 degrees ! Estimated noise=1334.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0378761 Jy ! Component: 100 - total flux cleaned = 0.0461582 Jy ! Total flux subtracted in 100 components = 0.0461582 Jy ! Clean residual min=-0.003830 max=0.004268 Jy/beam ! Clean residual mean=-0.000023 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.0461582 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0461582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077521Jy sigma=0.000606 ! Fit after self-cal, rms=0.075956Jy sigma=0.000592 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=17.24 mas, bpa=-17.85 degrees ! Estimated noise=608.974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178461 Jy ! Component: 100 - total flux cleaned = 0.00196986 Jy ! Component: 150 - total flux cleaned = 0.00202028 Jy ! Component: 200 - total flux cleaned = 0.00210759 Jy ! Total flux subtracted in 200 components = 0.00210759 Jy ! Clean residual min=-0.001756 max=0.002031 Jy/beam ! Clean residual mean=-0.000008 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0482658 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.0482658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075835Jy sigma=0.000592 ! Fit after self-cal, rms=0.075775Jy sigma=0.000591 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 1.01 KP 1.03 ! LA 1.01 MK 0.98 NL 0.98 OV 1.06 ! PT 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.05 KP 0.96 ! LA 0.95 MK 0.97 NL 1.08 OV 1.06 ! PT 1.10 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.91 HN 1.06 KP 0.95 ! LA 1.00 MK 1.02 NL 0.98 OV 1.02 ! PT 1.05 ! ! ! Correcting IF 4. ! A total of 690 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.76 HN 0.81 KP 1.00* ! LA 0.71 MK 0.77 NL 1.00* OV 0.72 ! PT 0.93 ! ! ! Fit before self-cal, rms=0.075775Jy sigma=0.000591 ! Fit after self-cal, rms=0.074782Jy sigma=0.000593 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=16.92 mas, bpa=-17.95 degrees ! Estimated noise=623.639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000335374 Jy ! Component: 100 - total flux cleaned = 0.000334122 Jy ! Component: 150 - total flux cleaned = 0.000310854 Jy ! Component: 200 - total flux cleaned = 0.000311934 Jy ! Total flux subtracted in 200 components = 0.000311934 Jy ! Clean residual min=-0.001522 max=0.001327 Jy/beam ! Clean residual mean=-0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0485778 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.0485778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074767Jy sigma=0.000593 ! Fit after self-cal, rms=0.074672Jy sigma=0.000593 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074672Jy sigma=0.000593 ! Fit after self-cal, rms=0.073537Jy sigma=0.000592 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=16.87 mas, bpa=-17.91 degrees ! Estimated noise=621.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320484 Jy ! Component: 100 - total flux cleaned = 0.00036731 Jy ! Component: 150 - total flux cleaned = 0.00038099 Jy ! Component: 200 - total flux cleaned = 0.00040613 Jy ! Total flux subtracted in 200 components = 0.00040613 Jy ! Clean residual min=-0.001436 max=0.001398 Jy/beam ! Clean residual mean=0.000004 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0489839 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.0489839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073529Jy sigma=0.000592 ! Fit after self-cal, rms=0.073493Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014158 Jy ! Component: 100 - total flux cleaned = 0.000126676 Jy ! Component: 150 - total flux cleaned = 0.000114044 Jy ! Component: 200 - total flux cleaned = 0.000126732 Jy ! Total flux subtracted in 200 components = 0.000126732 Jy ! Clean residual min=-0.001372 max=0.001361 Jy/beam ! Clean residual mean=0.000003 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.0491106 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.0491106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073488Jy sigma=0.000592 ! Fit after self-cal, rms=0.073484Jy sigma=0.000592 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073484Jy sigma=0.000592 ! Fit after self-cal, rms=0.073487Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.763 mas, bmaj=16.87 mas, bpa=-17.88 degrees ! Estimated noise=621.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241901 Jy ! Component: 100 - total flux cleaned = 0.000283543 Jy ! Component: 150 - total flux cleaned = 0.000296137 Jy ! Component: 200 - total flux cleaned = 0.000319187 Jy ! Total flux subtracted in 200 components = 0.000319187 Jy ! Clean residual min=-0.001463 max=0.001358 Jy/beam ! Clean residual mean=0.000004 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0494298 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.0494298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073481Jy sigma=0.000592 ! Fit after self-cal, rms=0.073478Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.67089e-05 Jy ! Component: 100 - total flux cleaned = 5.52711e-05 Jy ! Component: 150 - total flux cleaned = 5.54204e-05 Jy ! Component: 200 - total flux cleaned = 6.54332e-05 Jy ! Total flux subtracted in 200 components = 6.54332e-05 Jy ! Clean residual min=-0.001404 max=0.001377 Jy/beam ! Clean residual mean=0.000004 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0494952 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.0494952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073474Jy sigma=0.000592 ! Fit after self-cal, rms=0.073469Jy sigma=0.000592 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073469Jy sigma=0.000592 ! Fit after self-cal, rms=0.073576Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.395 mas, bmaj=17.33 mas, bpa=-13.43 degrees ! Estimated noise=724.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222631 Jy ! Component: 100 - total flux cleaned = 0.000272928 Jy ! Component: 150 - total flux cleaned = 0.000273316 Jy ! Component: 200 - total flux cleaned = 0.000268606 Jy ! Total flux subtracted in 200 components = 0.000268606 Jy ! Clean residual min=-0.001603 max=0.001293 Jy/beam ! Clean residual mean=0.000008 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0497638 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.0497638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073575Jy sigma=0.000592 ! Fit after self-cal, rms=0.073563Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.21472e-05 Jy ! Component: 100 - total flux cleaned = 4.13413e-06 Jy ! Component: 150 - total flux cleaned = 4.11063e-06 Jy ! Component: 200 - total flux cleaned = 8.39965e-06 Jy ! Total flux subtracted in 200 components = 8.39965e-06 Jy ! Clean residual min=-0.001596 max=0.001289 Jy/beam ! Clean residual mean=0.000007 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0497722 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.0497722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073563Jy sigma=0.000592 ! Fit after self-cal, rms=0.073563Jy sigma=0.000592 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.76 mas, bmaj=16.9 mas, bpa=-17.85 degrees ! Estimated noise=621.577 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.76 x 16.9 at -17.85 degrees (North through East) ! Clean map min=-0.0014508 max=0.046137 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.761 mas, bmaj=13.6 mas, bpa=-17.59 degrees ! Estimated noise=1304.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0374114 Jy ! Component: 100 - total flux cleaned = 0.0458239 Jy ! Component: 150 - total flux cleaned = 0.0470542 Jy ! Component: 200 - total flux cleaned = 0.0475065 Jy ! Total flux subtracted in 200 components = 0.0475065 Jy ! Clean residual min=-0.002544 max=0.002994 Jy/beam ! Clean residual mean=0.000001 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0475065 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0475065 Jy ! Inverting map and beam ! Estimated beam: bmin=3.76 mas, bmaj=16.9 mas, bpa=-17.85 degrees ! Estimated noise=621.577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148754 Jy ! Component: 100 - total flux cleaned = 0.00186651 Jy ! Component: 150 - total flux cleaned = 0.00191917 Jy ! Component: 200 - total flux cleaned = 0.00189492 Jy ! Total flux subtracted in 200 components = 0.00189492 Jy ! Clean residual min=-0.001604 max=0.001434 Jy/beam ! Clean residual mean=0.000004 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0494015 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.0494015 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.395 mas, bmaj=17.33 mas, bpa=-13.43 degrees ! Estimated noise=724.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.44459e-05 Jy ! Component: 100 - total flux cleaned = -2.40209e-05 Jy ! Component: 150 - total flux cleaned = -2.3629e-05 Jy ! Component: 200 - total flux cleaned = -1.39153e-05 Jy ! Total flux subtracted in 200 components = -1.39153e-05 Jy ! Clean residual min=-0.001672 max=0.001327 Jy/beam ! Clean residual mean=0.000006 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.0493875 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.65854e-05 Jy ! Component: 100 - total flux cleaned = 2.39197e-05 Jy ! Component: 150 - total flux cleaned = 3.10332e-05 Jy ! Component: 200 - total flux cleaned = 3.81352e-05 Jy ! Total flux subtracted in 200 components = 3.81352e-05 Jy ! Clean residual min=-0.001653 max=0.001316 Jy/beam ! Clean residual mean=0.000006 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0494257 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.0494257 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.76 mas, bmaj=16.9 mas, bpa=-17.85 degrees ! Estimated noise=621.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200878 Jy ! Component: 100 - total flux cleaned = -0.000179915 Jy ! Component: 150 - total flux cleaned = -0.000140758 Jy ! Component: 200 - total flux cleaned = -0.000140606 Jy ! Total flux subtracted in 200 components = -0.000140606 Jy ! Clean residual min=-0.001529 max=0.001400 Jy/beam ! Clean residual mean=0.000003 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0492851 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.0492851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073582Jy sigma=0.000592 ! Fit after self-cal, rms=0.073574Jy sigma=0.000592 wmodel J1332+0719_S_2017_09_26_pus_map.mod ! Writing 49 model components to file: J1332+0719_S_2017_09_26_pus_map.mod wobs J1332+0719_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1332+0719_S_2017_09_26_pus_uvs.fits wwins J1332+0719_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1332+0719_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011563 Jy ! Component: 100 - total flux cleaned = 2.113e-06 Jy ! Component: 150 - total flux cleaned = 0.000133916 Jy ! Component: 200 - total flux cleaned = 0.000216179 Jy ! Component: 250 - total flux cleaned = 0.000235963 Jy ! Component: 300 - total flux cleaned = 0.000254738 Jy ! Component: 350 - total flux cleaned = 0.000237442 Jy ! Component: 400 - total flux cleaned = 0.000169147 Jy ! Component: 450 - total flux cleaned = 3.71227e-05 Jy ! Component: 500 - total flux cleaned = -5.85888e-05 Jy ! Component: 550 - total flux cleaned = -0.000166504 Jy ! Component: 600 - total flux cleaned = -0.000256249 Jy ! Component: 650 - total flux cleaned = -0.000373183 Jy ! Component: 700 - total flux cleaned = -0.000529731 Jy ! Component: 750 - total flux cleaned = -0.000654679 Jy ! Component: 800 - total flux cleaned = -0.000789949 Jy ! Component: 850 - total flux cleaned = -0.000908561 Jy ! Component: 900 - total flux cleaned = -0.00106391 Jy ! Component: 950 - total flux cleaned = -0.00119048 Jy ! Component: 1000 - total flux cleaned = -0.00131455 Jy ! Component: 1050 - total flux cleaned = -0.00142428 Jy ! Component: 1100 - total flux cleaned = -0.00152016 Jy ! Component: 1150 - total flux cleaned = -0.00157922 Jy ! Component: 1200 - total flux cleaned = -0.00166028 Jy ! Component: 1250 - total flux cleaned = -0.00169442 Jy ! Component: 1300 - total flux cleaned = -0.00175041 Jy ! Component: 1350 - total flux cleaned = -0.00179452 Jy ! Component: 1400 - total flux cleaned = -0.00183799 Jy ! Component: 1450 - total flux cleaned = -0.0019128 Jy ! Component: 1500 - total flux cleaned = -0.00193392 Jy ! Component: 1550 - total flux cleaned = -0.00197549 Jy ! Component: 1600 - total flux cleaned = -0.00206776 Jy ! Component: 1650 - total flux cleaned = -0.00210808 Jy ! Component: 1700 - total flux cleaned = -0.00212814 Jy ! Component: 1750 - total flux cleaned = -0.00219698 Jy ! Component: 1800 - total flux cleaned = -0.00226477 Jy ! Component: 1850 - total flux cleaned = -0.00231263 Jy ! Component: 1900 - total flux cleaned = -0.00236936 Jy ! Component: 1950 - total flux cleaned = -0.00240653 Jy ! Component: 2000 - total flux cleaned = -0.00245244 Jy ! Component: 2050 - total flux cleaned = -0.00248881 Jy ! Component: 2100 - total flux cleaned = -0.00251577 Jy ! Component: 2150 - total flux cleaned = -0.00256923 Jy ! Component: 2200 - total flux cleaned = -0.00262201 Jy ! Component: 2250 - total flux cleaned = -0.00270007 Jy ! Component: 2300 - total flux cleaned = -0.00272576 Jy ! Component: 2350 - total flux cleaned = -0.00275137 Jy ! Component: 2400 - total flux cleaned = -0.00281039 Jy ! Component: 2450 - total flux cleaned = -0.00284373 Jy ! Component: 2500 - total flux cleaned = -0.00286846 Jy ! Component: 2550 - total flux cleaned = -0.00291748 Jy ! Component: 2600 - total flux cleaned = -0.00297411 Jy ! Component: 2650 - total flux cleaned = -0.00300613 Jy ! Component: 2700 - total flux cleaned = -0.00304583 Jy ! Component: 2750 - total flux cleaned = -0.00310101 Jy ! Component: 2800 - total flux cleaned = -0.00314784 Jy ! Component: 2850 - total flux cleaned = -0.00321754 Jy ! Component: 2900 - total flux cleaned = -0.00327124 Jy ! Component: 2950 - total flux cleaned = -0.00333212 Jy ! Component: 3000 - total flux cleaned = -0.00339257 Jy ! Component: 3050 - total flux cleaned = -0.00343003 Jy ! Component: 3100 - total flux cleaned = -0.00349725 Jy ! Component: 3150 - total flux cleaned = -0.00359336 Jy ! Component: 3200 - total flux cleaned = -0.00363734 Jy ! Component: 3250 - total flux cleaned = -0.00372486 Jy ! Component: 3300 - total flux cleaned = -0.00378279 Jy ! Component: 3350 - total flux cleaned = -0.00382591 Jy ! Component: 3400 - total flux cleaned = -0.00391145 Jy ! Component: 3450 - total flux cleaned = -0.00395383 Jy ! Component: 3500 - total flux cleaned = -0.00398893 Jy ! Component: 3550 - total flux cleaned = -0.00405174 Jy ! Component: 3600 - total flux cleaned = -0.00406563 Jy ! Component: 3650 - total flux cleaned = -0.00411375 Jy ! Component: 3700 - total flux cleaned = -0.00412747 Jy ! Component: 3750 - total flux cleaned = -0.00415464 Jy ! Component: 3800 - total flux cleaned = -0.00418169 Jy ! Component: 3850 - total flux cleaned = -0.00422873 Jy ! Component: 3900 - total flux cleaned = -0.00423538 Jy ! Component: 3950 - total flux cleaned = -0.00425534 Jy ! Component: 4000 - total flux cleaned = -0.00425533 Jy ! Component: 4050 - total flux cleaned = -0.00428171 Jy ! Total flux subtracted in 4096 components = -0.0042948 Jy ! Clean residual min=-0.000385 max=0.000406 Jy/beam ! Clean residual mean=-0.000001 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.0449903 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 305 components and 0.0449903 Jy ![Exited script file: muppet] wmap "J1332+0719_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.76 x 16.9 at -17.85 degrees (North through East) ! Clean map min=-0.0010695 max=0.045998 Jy/beam ! Writing clean map to FITS file: J1332+0719_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0459984 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000121185 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.790367 0.790367 1.58073 3.16147 6.32293 12.6459 25.2917 50.5835 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.76 x 16.9 at -17.85 degrees (North through East) ! Clean map min=-0.0010695 max=0.045998 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1332+0719_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:01:54 2019