! Started logfile: J1331-2639_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:50:27 2019 obs J1331-2639_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1331-2639_S_2017_05_31_pus_uva.fits ! AN table 1: 109 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.436901 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1331-2639 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 8572 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1331-2639_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 484 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 549 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 503 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 824 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920743Jy sigma=0.006121 ! Fit after self-cal, rms=0.898003Jy sigma=0.006027 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.701 mas, bmaj=6.379 mas, bpa=-4.632 degrees ! Estimated noise=2187.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.082923 Jy ! Component: 100 - total flux cleaned = 0.103217 Jy ! Total flux subtracted in 100 components = 0.103217 Jy ! Clean residual min=-0.008839 max=0.013363 Jy/beam ! Clean residual mean=-0.000008 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 0.103217 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.103217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142582Jy sigma=0.000696 ! Fit after self-cal, rms=0.142555Jy sigma=0.000696 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=7.408 mas, bpa=-3.506 degrees ! Estimated noise=1366.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139915 Jy ! Component: 100 - total flux cleaned = 0.0217852 Jy ! Component: 150 - total flux cleaned = 0.0263483 Jy ! Component: 200 - total flux cleaned = 0.0276014 Jy ! Total flux subtracted in 200 components = 0.0276014 Jy ! Clean residual min=-0.005912 max=0.006951 Jy/beam ! Clean residual mean=-0.000010 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.130818 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.130818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140504Jy sigma=0.000684 ! Fit after self-cal, rms=0.140537Jy sigma=0.000683 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.63 KP 1.00 ! LA 0.98 MK 0.96 NL 0.91 OV 0.98 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.52 KP 1.05 ! LA 0.98 MK 1.06 NL 0.98 OV 1.07 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.08 HN 1.14 KP 0.97 ! LA 0.95 MK 1.07 NL 0.96 OV 0.92 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.87 KP 0.77 ! LA 0.60 MK 1.07 NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.140537Jy sigma=0.000683 ! Fit after self-cal, rms=0.125836Jy sigma=0.000677 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=7.431 mas, bpa=-3.055 degrees ! Estimated noise=1385.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105785 Jy ! Component: 100 - total flux cleaned = 0.00118361 Jy ! Component: 150 - total flux cleaned = 0.00129051 Jy ! Component: 200 - total flux cleaned = 0.00138711 Jy ! Total flux subtracted in 200 components = 0.00138711 Jy ! Clean residual min=-0.004204 max=0.004232 Jy/beam ! Clean residual mean=-0.000017 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.132205 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.132205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125752Jy sigma=0.000677 ! Fit after self-cal, rms=0.125791Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125791Jy sigma=0.000676 ! Fit after self-cal, rms=0.128081Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=7.39 mas, bpa=-2.849 degrees ! Estimated noise=1389.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272765 Jy ! Component: 100 - total flux cleaned = 0.000749715 Jy ! Component: 150 - total flux cleaned = 0.000869985 Jy ! Component: 200 - total flux cleaned = 0.000976942 Jy ! Total flux subtracted in 200 components = 0.000976942 Jy ! Clean residual min=-0.003800 max=0.004162 Jy/beam ! Clean residual mean=-0.000013 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.133182 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.133182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128029Jy sigma=0.000674 ! Fit after self-cal, rms=0.128075Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (106, -47). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263188 Jy ! Component: 100 - total flux cleaned = 0.00239228 Jy ! Component: 150 - total flux cleaned = 0.00232596 Jy ! Component: 200 - total flux cleaned = 0.00244188 Jy ! Total flux subtracted in 200 components = 0.00244188 Jy ! Clean residual min=-0.003593 max=0.003778 Jy/beam ! Clean residual mean=-0.000011 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.135624 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 73 components and 0.135624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127936Jy sigma=0.000673 ! Fit after self-cal, rms=0.127899Jy sigma=0.000673 ! Inverting map ! Added new window around map position (-58.5, -89). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352482 Jy ! Component: 100 - total flux cleaned = 0.00425746 Jy ! Component: 150 - total flux cleaned = 0.00432338 Jy ! Component: 200 - total flux cleaned = 0.004443 Jy ! Total flux subtracted in 200 components = 0.004443 Jy ! Clean residual min=-0.003349 max=0.003427 Jy/beam ! Clean residual mean=-0.000010 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.140067 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 91 components and 0.140067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127761Jy sigma=0.000672 ! Fit after self-cal, rms=0.127721Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127721Jy sigma=0.000672 ! Fit after self-cal, rms=0.124687Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=7.387 mas, bpa=-2.69 degrees ! Estimated noise=1379.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00047157 Jy ! Component: 100 - total flux cleaned = 0.000537369 Jy ! Component: 150 - total flux cleaned = 0.000537792 Jy ! Component: 200 - total flux cleaned = 0.000537419 Jy ! Total flux subtracted in 200 components = 0.000537419 Jy ! Clean residual min=-0.003092 max=0.003099 Jy/beam ! Clean residual mean=-0.000008 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.140604 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.140604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124624Jy sigma=0.000671 ! Fit after self-cal, rms=0.124602Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113645 Jy ! Component: 100 - total flux cleaned = 0.000113109 Jy ! Component: 150 - total flux cleaned = 2.19464e-05 Jy ! Component: 200 - total flux cleaned = -1.98505e-05 Jy ! Total flux subtracted in 200 components = -1.98505e-05 Jy ! Clean residual min=-0.003053 max=0.003063 Jy/beam ! Clean residual mean=-0.000007 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.140584 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 110 components and 0.140584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124558Jy sigma=0.000671 ! Fit after self-cal, rms=0.124556Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124556Jy sigma=0.000671 ! Fit after self-cal, rms=0.124591Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.349 mas, bmaj=17.76 mas, bpa=-1.166 degrees ! Estimated noise=1701.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.23328e-05 Jy ! Component: 100 - total flux cleaned = 0.000172406 Jy ! Component: 150 - total flux cleaned = 0.000263216 Jy ! Component: 200 - total flux cleaned = 0.000224612 Jy ! Total flux subtracted in 200 components = 0.000224612 Jy ! Clean residual min=-0.003144 max=0.003611 Jy/beam ! Clean residual mean=-0.000012 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.140809 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 121 components and 0.140809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124575Jy sigma=0.000671 ! Fit after self-cal, rms=0.124566Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.11585e-05 Jy ! Component: 100 - total flux cleaned = 0.000118374 Jy ! Component: 150 - total flux cleaned = 0.000117172 Jy ! Component: 200 - total flux cleaned = 0.000151579 Jy ! Total flux subtracted in 200 components = 0.000151579 Jy ! Clean residual min=-0.003141 max=0.003593 Jy/beam ! Clean residual mean=-0.000012 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.140961 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 125 components and 0.140961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124557Jy sigma=0.000670 ! Fit after self-cal, rms=0.124554Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=7.382 mas, bpa=-2.646 degrees ! Estimated noise=1379.97 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.259 x 7.382 at -2.646 degrees (North through East) ! Clean map min=-0.0045474 max=0.1033 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=6.467 mas, bpa=-4.618 degrees ! Estimated noise=1930.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0817623 Jy ! Component: 100 - total flux cleaned = 0.102628 Jy ! Component: 150 - total flux cleaned = 0.112768 Jy ! Component: 200 - total flux cleaned = 0.119387 Jy ! Total flux subtracted in 200 components = 0.119387 Jy ! Clean residual min=-0.007089 max=0.006280 Jy/beam ! Clean residual mean=-0.000019 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 0.119387 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.119387 Jy ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=7.382 mas, bpa=-2.646 degrees ! Estimated noise=1379.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00666634 Jy ! Component: 100 - total flux cleaned = 0.0104331 Jy ! Component: 150 - total flux cleaned = 0.01279 Jy ! Component: 200 - total flux cleaned = 0.0141827 Jy ! Total flux subtracted in 200 components = 0.0141827 Jy ! Clean residual min=-0.003981 max=0.003648 Jy/beam ! Clean residual mean=-0.000010 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.133569 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 59 components and 0.133569 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.349 mas, bmaj=17.76 mas, bpa=-1.166 degrees ! Estimated noise=1701.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298284 Jy ! Component: 100 - total flux cleaned = 0.00408445 Jy ! Component: 150 - total flux cleaned = 0.00474677 Jy ! Component: 200 - total flux cleaned = 0.00533678 Jy ! Total flux subtracted in 200 components = 0.00533678 Jy ! Clean residual min=-0.003416 max=0.003860 Jy/beam ! Clean residual mean=-0.000019 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.138906 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000531577 Jy ! Component: 100 - total flux cleaned = 0.000946826 Jy ! Component: 150 - total flux cleaned = 0.00133008 Jy ! Component: 200 - total flux cleaned = 0.00156593 Jy ! Total flux subtracted in 200 components = 0.00156593 Jy ! Clean residual min=-0.003329 max=0.003793 Jy/beam ! Clean residual mean=-0.000017 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.140472 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 104 components and 0.140472 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=7.382 mas, bpa=-2.646 degrees ! Estimated noise=1379.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00047476 Jy ! Component: 100 - total flux cleaned = 0.000632632 Jy ! Component: 150 - total flux cleaned = 0.000554931 Jy ! Component: 200 - total flux cleaned = 0.000484069 Jy ! Total flux subtracted in 200 components = 0.000484069 Jy ! Clean residual min=-0.003232 max=0.003444 Jy/beam ! Clean residual mean=-0.000007 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.140956 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 121 components and 0.140956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124726Jy sigma=0.000671 ! Fit after self-cal, rms=0.124679Jy sigma=0.000671 wmodel J1331-2639_S_2017_05_31_pus_map.mod ! Writing 121 model components to file: J1331-2639_S_2017_05_31_pus_map.mod wobs J1331-2639_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1331-2639_S_2017_05_31_pus_uvs.fits wwins J1331-2639_S_2017_05_31_pus_map.win ! wwins: Wrote 4 windows to J1331-2639_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109034 Jy ! Component: 100 - total flux cleaned = -0.000379176 Jy ! Component: 150 - total flux cleaned = -0.000634395 Jy ! Component: 200 - total flux cleaned = -0.000538312 Jy ! Component: 250 - total flux cleaned = -0.00039898 Jy ! Component: 300 - total flux cleaned = -0.000174614 Jy ! Component: 350 - total flux cleaned = -7.00978e-07 Jy ! Component: 400 - total flux cleaned = 0.000168738 Jy ! Component: 450 - total flux cleaned = 0.000334266 Jy ! Component: 500 - total flux cleaned = 0.000453901 Jy ! Component: 550 - total flux cleaned = 0.00060958 Jy ! Component: 600 - total flux cleaned = 0.000685836 Jy ! Component: 650 - total flux cleaned = 0.000835188 Jy ! Component: 700 - total flux cleaned = 0.000981703 Jy ! Component: 750 - total flux cleaned = 0.0010897 Jy ! Component: 800 - total flux cleaned = 0.00123097 Jy ! Component: 850 - total flux cleaned = 0.00140372 Jy ! Component: 900 - total flux cleaned = 0.00153872 Jy ! Component: 950 - total flux cleaned = 0.00150459 Jy ! Component: 1000 - total flux cleaned = 0.001537 Jy ! Component: 1050 - total flux cleaned = 0.00153693 Jy ! Component: 1100 - total flux cleaned = 0.00166298 Jy ! Component: 1150 - total flux cleaned = 0.00169359 Jy ! Component: 1200 - total flux cleaned = 0.00175427 Jy ! Component: 1250 - total flux cleaned = 0.00166415 Jy ! Component: 1300 - total flux cleaned = 0.00163466 Jy ! Component: 1350 - total flux cleaned = 0.00166372 Jy ! Component: 1400 - total flux cleaned = 0.00172024 Jy ! Component: 1450 - total flux cleaned = 0.00166391 Jy ! Component: 1500 - total flux cleaned = 0.00177577 Jy ! Component: 1550 - total flux cleaned = 0.0017481 Jy ! Component: 1600 - total flux cleaned = 0.00163939 Jy ! Component: 1650 - total flux cleaned = 0.00161229 Jy ! Component: 1700 - total flux cleaned = 0.00153403 Jy ! Component: 1750 - total flux cleaned = 0.00158645 Jy ! Component: 1800 - total flux cleaned = 0.00156093 Jy ! Component: 1850 - total flux cleaned = 0.00158658 Jy ! Component: 1900 - total flux cleaned = 0.00156155 Jy ! Component: 1950 - total flux cleaned = 0.00153684 Jy ! Component: 2000 - total flux cleaned = 0.0016093 Jy ! Component: 2050 - total flux cleaned = 0.00158608 Jy ! Component: 2100 - total flux cleaned = 0.0017042 Jy ! Component: 2150 - total flux cleaned = 0.00172697 Jy ! Component: 2200 - total flux cleaned = 0.00168069 Jy ! Component: 2250 - total flux cleaned = 0.00177176 Jy ! Component: 2300 - total flux cleaned = 0.00172682 Jy ! Component: 2350 - total flux cleaned = 0.00183833 Jy ! Component: 2400 - total flux cleaned = 0.00181632 Jy ! Component: 2450 - total flux cleaned = 0.00179424 Jy ! Component: 2500 - total flux cleaned = 0.00175099 Jy ! Component: 2550 - total flux cleaned = 0.00172983 Jy ! Component: 2600 - total flux cleaned = 0.00172982 Jy ! Component: 2650 - total flux cleaned = 0.00166684 Jy ! Component: 2700 - total flux cleaned = 0.00160447 Jy ! Component: 2750 - total flux cleaned = 0.00158407 Jy ! Component: 2800 - total flux cleaned = 0.00158417 Jy ! Component: 2850 - total flux cleaned = 0.00152332 Jy ! Component: 2900 - total flux cleaned = 0.00146351 Jy ! Component: 2950 - total flux cleaned = 0.00148359 Jy ! Component: 3000 - total flux cleaned = 0.00150329 Jy ! Component: 3050 - total flux cleaned = 0.00148388 Jy ! Component: 3100 - total flux cleaned = 0.00150343 Jy ! Component: 3150 - total flux cleaned = 0.00150356 Jy ! Component: 3200 - total flux cleaned = 0.00148469 Jy ! Component: 3250 - total flux cleaned = 0.00146583 Jy ! Component: 3300 - total flux cleaned = 0.00144708 Jy ! Component: 3350 - total flux cleaned = 0.0014658 Jy ! Component: 3400 - total flux cleaned = 0.0014287 Jy ! Component: 3450 - total flux cleaned = 0.0013185 Jy ! Component: 3500 - total flux cleaned = 0.00137327 Jy ! Component: 3550 - total flux cleaned = 0.00130105 Jy ! Component: 3600 - total flux cleaned = 0.00131894 Jy ! Component: 3650 - total flux cleaned = 0.00130104 Jy ! Component: 3700 - total flux cleaned = 0.00121224 Jy ! Component: 3750 - total flux cleaned = 0.00122987 Jy ! Component: 3800 - total flux cleaned = 0.00117729 Jy ! Component: 3850 - total flux cleaned = 0.00112514 Jy ! Component: 3900 - total flux cleaned = 0.0011426 Jy ! Component: 3950 - total flux cleaned = 0.00110809 Jy ! Component: 4000 - total flux cleaned = 0.00102243 Jy ! Component: 4050 - total flux cleaned = 0.000971316 Jy ! Total flux subtracted in 4096 components = 0.000903504 Jy ! Clean residual min=-0.001090 max=0.001051 Jy/beam ! Clean residual mean=-0.000000 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.14186 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 380 components and 0.14186 Jy ![Exited script file: muppet] wmap "J1331-2639_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.259 x 7.382 at -2.646 degrees (North through East) ! Clean map min=-0.0025728 max=0.10441 Jy/beam ! Writing clean map to FITS file: J1331-2639_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104414 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000294554 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.846309 0.846309 1.69262 3.38524 6.77048 13.541 27.0819 54.1638 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.259 x 7.382 at -2.646 degrees (North through East) ! Clean map min=-0.0025728 max=0.10441 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1331-2639_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:50:32 2019