! Started logfile: J1330-3122_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:42:24 2019 obs J1330-3122_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1330-3122_S_2017_03_27_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.785088 visibilities/baseline/integration-bin. ! Found source: J1330-3122 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 10740 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1330-3122_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 265 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.672678Jy sigma=0.003903 ! Fit after self-cal, rms=0.577590Jy sigma=0.003286 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=7.724 mas, bpa=7.181 degrees ! Estimated noise=2263.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.352815 Jy ! Component: 100 - total flux cleaned = 0.435043 Jy ! Total flux subtracted in 100 components = 0.435043 Jy ! Clean residual min=-0.023035 max=0.054425 Jy/beam ! Clean residual mean=-0.000187 rms=0.007470 Jy/beam ! Combined flux in latest and established models = 0.435043 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.435043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183695Jy sigma=0.000964 ! Fit after self-cal, rms=0.183713Jy sigma=0.000964 ! Inverting map ! Added new window around map position (3, -7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489033 Jy ! Component: 100 - total flux cleaned = 0.0759306 Jy ! Total flux subtracted in 100 components = 0.0759306 Jy ! Clean residual min=-0.024060 max=0.041357 Jy/beam ! Clean residual mean=-0.000085 rms=0.005985 Jy/beam ! Combined flux in latest and established models = 0.510973 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.510973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169477Jy sigma=0.000853 ! Fit after self-cal, rms=0.168829Jy sigma=0.000846 ! Inverting map ! Added new window around map position (-15, 83.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309783 Jy ! Component: 100 - total flux cleaned = 0.0371592 Jy ! Total flux subtracted in 100 components = 0.0371592 Jy ! Clean residual min=-0.020462 max=0.027346 Jy/beam ! Clean residual mean=-0.000038 rms=0.005041 Jy/beam ! Combined flux in latest and established models = 0.548132 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.548132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162309Jy sigma=0.000809 ! Fit after self-cal, rms=0.162006Jy sigma=0.000804 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=9.414 mas, bpa=6.79 degrees ! Estimated noise=1250.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144361 Jy ! Component: 100 - total flux cleaned = 0.0153677 Jy ! Component: 150 - total flux cleaned = 0.0165274 Jy ! Component: 200 - total flux cleaned = 0.0168592 Jy ! Total flux subtracted in 200 components = 0.0168592 Jy ! Clean residual min=-0.016316 max=0.018022 Jy/beam ! Clean residual mean=-0.000039 rms=0.004310 Jy/beam ! Combined flux in latest and established models = 0.564992 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 35 components and 0.564992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159370Jy sigma=0.000788 ! Fit after self-cal, rms=0.159377Jy sigma=0.000787 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 1.30 KP 1.02 ! LA 1.01 MK 1.02 NL 0.97 OV 1.00 ! PT 1.03 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.42 KP 0.99 ! LA 0.97 MK 1.04 NL 1.01 OV 1.03 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.02 HN 1.42 KP 0.98 ! LA 0.99 MK 1.06 NL 0.98 OV 0.94 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.36 KP 1.00* ! LA 0.92 MK 0.96 NL 1.00* OV 0.83 ! PT 1.04 SC 1.15 ! ! ! Fit before self-cal, rms=0.159377Jy sigma=0.000787 ! Fit after self-cal, rms=0.171028Jy sigma=0.000738 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=9.431 mas, bpa=7.405 degrees ! Estimated noise=1276.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00888443 Jy ! Component: 100 - total flux cleaned = -0.0113801 Jy ! Component: 150 - total flux cleaned = -0.0130609 Jy ! Component: 200 - total flux cleaned = -0.013997 Jy ! Total flux subtracted in 200 components = -0.013997 Jy ! Clean residual min=-0.013212 max=0.013512 Jy/beam ! Clean residual mean=-0.000044 rms=0.003290 Jy/beam ! Combined flux in latest and established models = 0.550995 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.550995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169080Jy sigma=0.000731 ! Fit after self-cal, rms=0.169142Jy sigma=0.000730 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169142Jy sigma=0.000730 ! Fit after self-cal, rms=0.187179Jy sigma=0.000711 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=9.435 mas, bpa=7.589 degrees ! Estimated noise=1301.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00484397 Jy ! Component: 100 - total flux cleaned = -0.0074838 Jy ! Component: 150 - total flux cleaned = -0.00944082 Jy ! Component: 200 - total flux cleaned = -0.0105855 Jy ! Total flux subtracted in 200 components = -0.0105855 Jy ! Clean residual min=-0.010376 max=0.009442 Jy/beam ! Clean residual mean=-0.000042 rms=0.002471 Jy/beam ! Combined flux in latest and established models = 0.540409 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 71 components and 0.540409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185321Jy sigma=0.000702 ! Fit after self-cal, rms=0.185384Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00233449 Jy ! Component: 100 - total flux cleaned = -0.0030442 Jy ! Component: 150 - total flux cleaned = -0.00369164 Jy ! Component: 200 - total flux cleaned = -0.00388477 Jy ! Total flux subtracted in 200 components = -0.00388477 Jy ! Clean residual min=-0.009789 max=0.009011 Jy/beam ! Clean residual mean=-0.000054 rms=0.002336 Jy/beam ! Combined flux in latest and established models = 0.536524 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 91 components and 0.536524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184728Jy sigma=0.000699 ! Fit after self-cal, rms=0.184691Jy sigma=0.000699 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184691Jy sigma=0.000699 ! Fit after self-cal, rms=0.203190Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=9.487 mas, bpa=7.659 degrees ! Estimated noise=1299.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00499281 Jy ! Component: 100 - total flux cleaned = -0.00581218 Jy ! Component: 150 - total flux cleaned = -0.00640709 Jy ! Component: 200 - total flux cleaned = -0.00695478 Jy ! Total flux subtracted in 200 components = -0.00695478 Jy ! Clean residual min=-0.006596 max=0.005653 Jy/beam ! Clean residual mean=-0.000042 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.52957 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 100 components and 0.52957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202792Jy sigma=0.000680 ! Fit after self-cal, rms=0.202880Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106474 Jy ! Component: 100 - total flux cleaned = -0.00143209 Jy ! Component: 150 - total flux cleaned = -0.00143048 Jy ! Component: 200 - total flux cleaned = -0.0015362 Jy ! Total flux subtracted in 200 components = -0.0015362 Jy ! Clean residual min=-0.006371 max=0.005401 Jy/beam ! Clean residual mean=-0.000047 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 0.528033 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 107 components and 0.528033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202694Jy sigma=0.000678 ! Fit after self-cal, rms=0.202674Jy sigma=0.000678 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202674Jy sigma=0.000678 ! Fit after self-cal, rms=0.208465Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.003 mas, bmaj=23.62 mas, bpa=8.282 degrees ! Estimated noise=1520.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0030444 Jy ! Component: 100 - total flux cleaned = -0.00344375 Jy ! Component: 150 - total flux cleaned = -0.00380457 Jy ! Component: 200 - total flux cleaned = -0.0040677 Jy ! Total flux subtracted in 200 components = -0.0040677 Jy ! Clean residual min=-0.006314 max=0.004506 Jy/beam ! Clean residual mean=-0.000063 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.523966 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 110 components and 0.523966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208326Jy sigma=0.000677 ! Fit after self-cal, rms=0.208353Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000274514 Jy ! Component: 100 - total flux cleaned = -0.000566871 Jy ! Component: 150 - total flux cleaned = -0.000835847 Jy ! Component: 200 - total flux cleaned = -0.00103345 Jy ! Total flux subtracted in 200 components = -0.00103345 Jy ! Clean residual min=-0.006189 max=0.004424 Jy/beam ! Clean residual mean=-0.000070 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.522932 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 111 components and 0.522932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208296Jy sigma=0.000677 ! Fit after self-cal, rms=0.208291Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=9.488 mas, bpa=7.668 degrees ! Estimated noise=1297.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 9.488 at 7.668 degrees (North through East) ! Clean map min=-0.0075113 max=0.44901 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=7.736 mas, bpa=8.117 degrees ! Estimated noise=2391.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.371914 Jy ! Component: 100 - total flux cleaned = 0.455905 Jy ! Component: 150 - total flux cleaned = 0.485469 Jy ! Component: 200 - total flux cleaned = 0.501674 Jy ! Total flux subtracted in 200 components = 0.501674 Jy ! Clean residual min=-0.009401 max=0.010970 Jy/beam ! Clean residual mean=-0.000051 rms=0.002210 Jy/beam ! Combined flux in latest and established models = 0.501674 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.501674 Jy ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=9.488 mas, bpa=7.668 degrees ! Estimated noise=1297.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119776 Jy ! Component: 100 - total flux cleaned = 0.0182364 Jy ! Component: 150 - total flux cleaned = 0.0195636 Jy ! Component: 200 - total flux cleaned = 0.0198108 Jy ! Total flux subtracted in 200 components = 0.0198108 Jy ! Clean residual min=-0.005555 max=0.004865 Jy/beam ! Clean residual mean=-0.000042 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.521485 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 0.521485 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.003 mas, bmaj=23.62 mas, bpa=8.282 degrees ! Estimated noise=1520.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010133 Jy ! Component: 100 - total flux cleaned = 0.000613586 Jy ! Component: 150 - total flux cleaned = 0.000439166 Jy ! Component: 200 - total flux cleaned = 0.000350409 Jy ! Total flux subtracted in 200 components = 0.000350409 Jy ! Clean residual min=-0.005806 max=0.004419 Jy/beam ! Clean residual mean=-0.000074 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.521835 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.00103e-05 Jy ! Component: 100 - total flux cleaned = 4.21016e-05 Jy ! Component: 150 - total flux cleaned = 4.11255e-05 Jy ! Component: 200 - total flux cleaned = 4.35887e-05 Jy ! Total flux subtracted in 200 components = 4.35887e-05 Jy ! Clean residual min=-0.005650 max=0.004456 Jy/beam ! Clean residual mean=-0.000074 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.521879 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.521879 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=9.488 mas, bpa=7.668 degrees ! Estimated noise=1297.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.52896e-05 Jy ! Component: 100 - total flux cleaned = 0.000159541 Jy ! Component: 150 - total flux cleaned = 0.000226328 Jy ! Component: 200 - total flux cleaned = 0.000288565 Jy ! Total flux subtracted in 200 components = 0.000288565 Jy ! Clean residual min=-0.004886 max=0.004645 Jy/beam ! Clean residual mean=-0.000040 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.522167 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 75 components and 0.522167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207911Jy sigma=0.000675 ! Fit after self-cal, rms=0.207814Jy sigma=0.000674 wmodel J1330-3122_S_2017_03_27_pus_map.mod ! Writing 75 model components to file: J1330-3122_S_2017_03_27_pus_map.mod wobs J1330-3122_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1330-3122_S_2017_03_27_pus_uvs.fits wwins J1330-3122_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J1330-3122_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220279 Jy ! Component: 100 - total flux cleaned = -0.00292454 Jy ! Component: 150 - total flux cleaned = -0.00353217 Jy ! Component: 200 - total flux cleaned = -0.00389574 Jy ! Component: 250 - total flux cleaned = -0.00410566 Jy ! Component: 300 - total flux cleaned = -0.0043064 Jy ! Component: 350 - total flux cleaned = -0.004306 Jy ! Component: 400 - total flux cleaned = -0.00443074 Jy ! Component: 450 - total flux cleaned = -0.0042469 Jy ! Component: 500 - total flux cleaned = -0.00394977 Jy ! Component: 550 - total flux cleaned = -0.00371834 Jy ! Component: 600 - total flux cleaned = -0.00343625 Jy ! Component: 650 - total flux cleaned = -0.00316019 Jy ! Component: 700 - total flux cleaned = -0.00299798 Jy ! Component: 750 - total flux cleaned = -0.00289217 Jy ! Component: 800 - total flux cleaned = -0.00294492 Jy ! Component: 850 - total flux cleaned = -0.00294355 Jy ! Component: 900 - total flux cleaned = -0.00289236 Jy ! Component: 950 - total flux cleaned = -0.00269457 Jy ! Component: 1000 - total flux cleaned = -0.00288864 Jy ! Component: 1050 - total flux cleaned = -0.00279304 Jy ! Component: 1100 - total flux cleaned = -0.00288588 Jy ! Component: 1150 - total flux cleaned = -0.00288518 Jy ! Component: 1200 - total flux cleaned = -0.00302104 Jy ! Component: 1250 - total flux cleaned = -0.00297552 Jy ! Component: 1300 - total flux cleaned = -0.00319773 Jy ! Component: 1350 - total flux cleaned = -0.00324147 Jy ! Component: 1400 - total flux cleaned = -0.00337112 Jy ! Component: 1450 - total flux cleaned = -0.00349853 Jy ! Component: 1500 - total flux cleaned = -0.00345638 Jy ! Component: 1550 - total flux cleaned = -0.0035818 Jy ! Component: 1600 - total flux cleaned = -0.00366367 Jy ! Component: 1650 - total flux cleaned = -0.0037044 Jy ! Component: 1700 - total flux cleaned = -0.00374432 Jy ! Component: 1750 - total flux cleaned = -0.00374456 Jy ! Component: 1800 - total flux cleaned = -0.00374527 Jy ! Component: 1850 - total flux cleaned = -0.00378475 Jy ! Component: 1900 - total flux cleaned = -0.0038232 Jy ! Component: 1950 - total flux cleaned = -0.00378551 Jy ! Component: 2000 - total flux cleaned = -0.00367356 Jy ! Component: 2050 - total flux cleaned = -0.00367376 Jy ! Component: 2100 - total flux cleaned = -0.0035645 Jy ! Component: 2150 - total flux cleaned = -0.00352814 Jy ! Component: 2200 - total flux cleaned = -0.00352835 Jy ! Component: 2250 - total flux cleaned = -0.00345742 Jy ! Component: 2300 - total flux cleaned = -0.00338741 Jy ! Component: 2350 - total flux cleaned = -0.00331774 Jy ! Component: 2400 - total flux cleaned = -0.00314618 Jy ! Component: 2450 - total flux cleaned = -0.00318031 Jy ! Component: 2500 - total flux cleaned = -0.00321361 Jy ! Component: 2550 - total flux cleaned = -0.00311305 Jy ! Component: 2600 - total flux cleaned = -0.00301381 Jy ! Component: 2650 - total flux cleaned = -0.0030465 Jy ! Component: 2700 - total flux cleaned = -0.00301422 Jy ! Component: 2750 - total flux cleaned = -0.00291744 Jy ! Component: 2800 - total flux cleaned = -0.00288545 Jy ! Component: 2850 - total flux cleaned = -0.00285352 Jy ! Component: 2900 - total flux cleaned = -0.00279075 Jy ! Component: 2950 - total flux cleaned = -0.0026975 Jy ! Component: 3000 - total flux cleaned = -0.00263593 Jy ! Component: 3050 - total flux cleaned = -0.00257488 Jy ! Component: 3100 - total flux cleaned = -0.00254474 Jy ! Component: 3150 - total flux cleaned = -0.0023644 Jy ! Component: 3200 - total flux cleaned = -0.00227487 Jy ! Component: 3250 - total flux cleaned = -0.00227502 Jy ! Component: 3300 - total flux cleaned = -0.00230407 Jy ! Component: 3350 - total flux cleaned = -0.00204103 Jy ! Component: 3400 - total flux cleaned = -0.00201206 Jy ! Component: 3450 - total flux cleaned = -0.00195448 Jy ! Component: 3500 - total flux cleaned = -0.0018404 Jy ! Component: 3550 - total flux cleaned = -0.00169891 Jy ! Component: 3600 - total flux cleaned = -0.00169953 Jy ! Component: 3650 - total flux cleaned = -0.00158806 Jy ! Component: 3700 - total flux cleaned = -0.00164374 Jy ! Component: 3750 - total flux cleaned = -0.00150582 Jy ! Component: 3800 - total flux cleaned = -0.00147825 Jy ! Component: 3850 - total flux cleaned = -0.00136961 Jy ! Component: 3900 - total flux cleaned = -0.00123465 Jy ! Component: 3950 - total flux cleaned = -0.00123463 Jy ! Component: 4000 - total flux cleaned = -0.00110136 Jy ! Component: 4050 - total flux cleaned = -0.00107466 Jy ! Total flux subtracted in 4096 components = -0.00107481 Jy ! Clean residual min=-0.001497 max=0.001608 Jy/beam ! Clean residual mean=-0.000015 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.521092 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 361 components and 0.521092 Jy ![Exited script file: muppet] wmap "J1330-3122_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 9.488 at 7.668 degrees (North through East) ! Clean map min=-0.0050176 max=0.46108 Jy/beam ! Writing clean map to FITS file: J1330-3122_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.461078 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000486953 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.316836 0.316836 0.633672 1.26734 2.53469 5.06938 10.1388 20.2775 40.555 81.11 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.461 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.211 x 9.488 at 7.668 degrees (North through East) ! Clean map min=-0.0050176 max=0.46108 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1330-3122_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:42:28 2019