! Started logfile: J1327-1336_S_2017_01_21_pus_uvs.log on Sun May 5 15:55:31 2019 obs J1327-1336_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1327-1336_S_2017_01_21_pus_uva.fits ! AN table 1: 131 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.683842 visibilities/baseline/integration-bin. ! Found source: J1327-1336 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 12900 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1327-1336_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 552 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.981619Jy sigma=0.006608 ! Fit after self-cal, rms=0.933872Jy sigma=0.006321 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.392 mas, bmaj=6.15 mas, bpa=-4.065 degrees ! Estimated noise=1429.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0555595 Jy ! Component: 100 - total flux cleaned = 0.067705 Jy ! Total flux subtracted in 100 components = 0.067705 Jy ! Clean residual min=-0.003614 max=0.003709 Jy/beam ! Clean residual mean=-0.000012 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.067705 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.067705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107081Jy sigma=0.000644 ! Fit after self-cal, rms=0.106465Jy sigma=0.000640 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=6.902 mas, bpa=-3.593 degrees ! Estimated noise=1031.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475872 Jy ! Component: 100 - total flux cleaned = 0.0067202 Jy ! Component: 150 - total flux cleaned = 0.00727468 Jy ! Component: 200 - total flux cleaned = 0.00737413 Jy ! Total flux subtracted in 200 components = 0.00737413 Jy ! Clean residual min=-0.002952 max=0.003041 Jy/beam ! Clean residual mean=-0.000006 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.0750791 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 14 components and 0.0750791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106241Jy sigma=0.000639 ! Fit after self-cal, rms=0.106225Jy sigma=0.000639 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.00 LA 1.04 ! MK 1.01 NL 1.06 OV 1.05 PT 1.01 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.96 LA 0.98 ! MK 1.04 NL 1.09 OV 1.12 PT 0.99 ! SC 1.04 ! ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.02 LA 1.02 ! MK 0.98 NL 0.98 OV 0.97 PT 1.02 ! SC 1.05 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.85 LA 0.93 ! MK 0.97 NL 1.00* OV 0.79 PT 0.95 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.106225Jy sigma=0.000639 ! Fit after self-cal, rms=0.105272Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.845 mas, bmaj=6.92 mas, bpa=-4.014 degrees ! Estimated noise=1034.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406834 Jy ! Component: 100 - total flux cleaned = 0.000314267 Jy ! Component: 150 - total flux cleaned = 0.000264983 Jy ! Component: 200 - total flux cleaned = 0.000242124 Jy ! Total flux subtracted in 200 components = 0.000242124 Jy ! Clean residual min=-0.002618 max=0.002499 Jy/beam ! Clean residual mean=-0.000006 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0753212 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.0753212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105252Jy sigma=0.000638 ! Fit after self-cal, rms=0.105266Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105266Jy sigma=0.000638 ! Fit after self-cal, rms=0.105231Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=6.909 mas, bpa=-4.085 degrees ! Estimated noise=1033.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.84178e-05 Jy ! Component: 100 - total flux cleaned = -3.80318e-05 Jy ! Component: 150 - total flux cleaned = -7.7455e-05 Jy ! Component: 200 - total flux cleaned = -9.53313e-05 Jy ! Total flux subtracted in 200 components = -9.53313e-05 Jy ! Clean residual min=-0.002700 max=0.002420 Jy/beam ! Clean residual mean=-0.000004 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0752259 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.0752259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105216Jy sigma=0.000637 ! Fit after self-cal, rms=0.105216Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.61674e-05 Jy ! Component: 100 - total flux cleaned = -7.52847e-05 Jy ! Component: 150 - total flux cleaned = -0.000110987 Jy ! Component: 200 - total flux cleaned = -0.000111064 Jy ! Total flux subtracted in 200 components = -0.000111064 Jy ! Clean residual min=-0.002644 max=0.002409 Jy/beam ! Clean residual mean=-0.000005 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0751148 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.0751148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105204Jy sigma=0.000637 ! Fit after self-cal, rms=0.105202Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105202Jy sigma=0.000637 ! Fit after self-cal, rms=0.104241Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.85 mas, bmaj=6.918 mas, bpa=-3.99 degrees ! Estimated noise=1031.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000304264 Jy ! Component: 100 - total flux cleaned = -0.000349343 Jy ! Component: 150 - total flux cleaned = -0.000407227 Jy ! Component: 200 - total flux cleaned = -0.000441702 Jy ! Total flux subtracted in 200 components = -0.000441702 Jy ! Clean residual min=-0.002698 max=0.002517 Jy/beam ! Clean residual mean=-0.000003 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.0746731 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0746731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104231Jy sigma=0.000636 ! Fit after self-cal, rms=0.104241Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.55112e-05 Jy ! Component: 100 - total flux cleaned = -8.32415e-05 Jy ! Component: 150 - total flux cleaned = -0.000114263 Jy ! Component: 200 - total flux cleaned = -0.000128982 Jy ! Total flux subtracted in 200 components = -0.000128982 Jy ! Clean residual min=-0.002681 max=0.002549 Jy/beam ! Clean residual mean=-0.000004 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0745442 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0745441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104234Jy sigma=0.000636 ! Fit after self-cal, rms=0.104232Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104232Jy sigma=0.000636 ! Fit after self-cal, rms=0.104053Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.578 mas, bmaj=13.09 mas, bpa=2.254 degrees ! Estimated noise=1401.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265594 Jy ! Component: 100 - total flux cleaned = -0.000281689 Jy ! Component: 150 - total flux cleaned = -0.000295314 Jy ! Component: 200 - total flux cleaned = -0.000318676 Jy ! Total flux subtracted in 200 components = -0.000318676 Jy ! Clean residual min=-0.003506 max=0.003749 Jy/beam ! Clean residual mean=-0.000006 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.0742255 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 32 components and 0.0742255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104048Jy sigma=0.000636 ! Fit after self-cal, rms=0.104065Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.905e-05 Jy ! Component: 100 - total flux cleaned = -3.33946e-05 Jy ! Component: 150 - total flux cleaned = -4.53799e-05 Jy ! Component: 200 - total flux cleaned = -5.62848e-05 Jy ! Total flux subtracted in 200 components = -5.62848e-05 Jy ! Clean residual min=-0.003525 max=0.003784 Jy/beam ! Clean residual mean=-0.000006 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 0.0741692 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.0741692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104064Jy sigma=0.000636 ! Fit after self-cal, rms=0.104066Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=6.928 mas, bpa=-3.902 degrees ! Estimated noise=1028.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.854 x 6.928 at -3.902 degrees (North through East) ! Clean map min=-0.0026034 max=0.071814 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.404 mas, bmaj=6.197 mas, bpa=-4.426 degrees ! Estimated noise=1418.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0555458 Jy ! Component: 100 - total flux cleaned = 0.0684162 Jy ! Component: 150 - total flux cleaned = 0.0732899 Jy ! Component: 200 - total flux cleaned = 0.0739891 Jy ! Total flux subtracted in 200 components = 0.0739891 Jy ! Clean residual min=-0.003633 max=0.002903 Jy/beam ! Clean residual mean=-0.000002 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0739892 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0739892 Jy ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=6.928 mas, bpa=-3.902 degrees ! Estimated noise=1028.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622894 Jy ! Component: 100 - total flux cleaned = 0.000621529 Jy ! Component: 150 - total flux cleaned = 0.000619628 Jy ! Component: 200 - total flux cleaned = 0.000617554 Jy ! Total flux subtracted in 200 components = 0.000617554 Jy ! Clean residual min=-0.002698 max=0.002566 Jy/beam ! Clean residual mean=-0.000003 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.0746067 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.0746067 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.578 mas, bmaj=13.09 mas, bpa=2.254 degrees ! Estimated noise=1401.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.02059e-06 Jy ! Component: 100 - total flux cleaned = -4.54534e-05 Jy ! Component: 150 - total flux cleaned = -6.567e-05 Jy ! Component: 200 - total flux cleaned = -0.000102771 Jy ! Total flux subtracted in 200 components = -0.000102771 Jy ! Clean residual min=-0.003539 max=0.003718 Jy/beam ! Clean residual mean=-0.000006 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.0745039 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.56008e-05 Jy ! Component: 100 - total flux cleaned = -4.38598e-05 Jy ! Component: 150 - total flux cleaned = -6.78816e-05 Jy ! Component: 200 - total flux cleaned = -7.90287e-05 Jy ! Total flux subtracted in 200 components = -7.90287e-05 Jy ! Clean residual min=-0.003524 max=0.003744 Jy/beam ! Clean residual mean=-0.000006 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.0744249 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.0744249 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=6.928 mas, bpa=-3.902 degrees ! Estimated noise=1028.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118485 Jy ! Component: 100 - total flux cleaned = -0.000119965 Jy ! Component: 150 - total flux cleaned = -8.45217e-05 Jy ! Component: 200 - total flux cleaned = -8.2154e-05 Jy ! Total flux subtracted in 200 components = -8.2154e-05 Jy ! Clean residual min=-0.002675 max=0.002565 Jy/beam ! Clean residual mean=-0.000003 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0743428 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.0743428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104080Jy sigma=0.000636 ! Fit after self-cal, rms=0.104077Jy sigma=0.000636 wmodel J1327-1336_S_2017_01_21_pus_map.mod ! Writing 33 model components to file: J1327-1336_S_2017_01_21_pus_map.mod wobs J1327-1336_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1327-1336_S_2017_01_21_pus_uvs.fits wwins J1327-1336_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1327-1336_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00025173 Jy ! Component: 100 - total flux cleaned = -0.000378366 Jy ! Component: 150 - total flux cleaned = -0.000498614 Jy ! Component: 200 - total flux cleaned = -0.000652436 Jy ! Component: 250 - total flux cleaned = -0.000726106 Jy ! Component: 300 - total flux cleaned = -0.000726478 Jy ! Component: 350 - total flux cleaned = -0.000692006 Jy ! Component: 400 - total flux cleaned = -0.000693118 Jy ! Component: 450 - total flux cleaned = -0.000726749 Jy ! Component: 500 - total flux cleaned = -0.000791121 Jy ! Component: 550 - total flux cleaned = -0.00082196 Jy ! Component: 600 - total flux cleaned = -0.000852231 Jy ! Component: 650 - total flux cleaned = -0.000821544 Jy ! Component: 700 - total flux cleaned = -0.000879721 Jy ! Component: 750 - total flux cleaned = -0.000792808 Jy ! Component: 800 - total flux cleaned = -0.000765241 Jy ! Component: 850 - total flux cleaned = -0.000849294 Jy ! Component: 900 - total flux cleaned = -0.000876627 Jy ! Component: 950 - total flux cleaned = -0.000823456 Jy ! Component: 1000 - total flux cleaned = -0.000929168 Jy ! Component: 1050 - total flux cleaned = -0.000955063 Jy ! Component: 1100 - total flux cleaned = -0.000929445 Jy ! Component: 1150 - total flux cleaned = -0.000955271 Jy ! Component: 1200 - total flux cleaned = -0.000980891 Jy ! Component: 1250 - total flux cleaned = -0.0010303 Jy ! Component: 1300 - total flux cleaned = -0.00107847 Jy ! Component: 1350 - total flux cleaned = -0.00105434 Jy ! Component: 1400 - total flux cleaned = -0.00110178 Jy ! Component: 1450 - total flux cleaned = -0.00112483 Jy ! Component: 1500 - total flux cleaned = -0.00110171 Jy ! Component: 1550 - total flux cleaned = -0.00121587 Jy ! Component: 1600 - total flux cleaned = -0.00121603 Jy ! Component: 1650 - total flux cleaned = -0.00123835 Jy ! Component: 1700 - total flux cleaned = -0.00126013 Jy ! Component: 1750 - total flux cleaned = -0.00123834 Jy ! Component: 1800 - total flux cleaned = -0.00121711 Jy ! Component: 1850 - total flux cleaned = -0.00128079 Jy ! Component: 1900 - total flux cleaned = -0.00123871 Jy ! Component: 1950 - total flux cleaned = -0.00136302 Jy ! Component: 2000 - total flux cleaned = -0.00128122 Jy ! Component: 2050 - total flux cleaned = -0.00132188 Jy ! Component: 2100 - total flux cleaned = -0.00136198 Jy ! Component: 2150 - total flux cleaned = -0.00132238 Jy ! Component: 2200 - total flux cleaned = -0.00136205 Jy ! Component: 2250 - total flux cleaned = -0.00144014 Jy ! Component: 2300 - total flux cleaned = -0.00151701 Jy ! Component: 2350 - total flux cleaned = -0.00157389 Jy ! Component: 2400 - total flux cleaned = -0.00166803 Jy ! Component: 2450 - total flux cleaned = -0.00166776 Jy ! Component: 2500 - total flux cleaned = -0.00176028 Jy ! Component: 2550 - total flux cleaned = -0.00176026 Jy ! Component: 2600 - total flux cleaned = -0.00181459 Jy ! Component: 2650 - total flux cleaned = -0.00179655 Jy ! Component: 2700 - total flux cleaned = -0.00188584 Jy ! Component: 2750 - total flux cleaned = -0.00192112 Jy ! Component: 2800 - total flux cleaned = -0.00195597 Jy ! Component: 2850 - total flux cleaned = -0.00200785 Jy ! Component: 2900 - total flux cleaned = -0.00200764 Jy ! Component: 2950 - total flux cleaned = -0.00199039 Jy ! Component: 3000 - total flux cleaned = -0.00200731 Jy ! Component: 3050 - total flux cleaned = -0.00200717 Jy ! Component: 3100 - total flux cleaned = -0.00202362 Jy ! Component: 3150 - total flux cleaned = -0.00204009 Jy ! Component: 3200 - total flux cleaned = -0.00202353 Jy ! Component: 3250 - total flux cleaned = -0.00202355 Jy ! Component: 3300 - total flux cleaned = -0.00200758 Jy ! Component: 3350 - total flux cleaned = -0.00208776 Jy ! Component: 3400 - total flux cleaned = -0.00216707 Jy ! Component: 3450 - total flux cleaned = -0.00210409 Jy ! Component: 3500 - total flux cleaned = -0.00216668 Jy ! Component: 3550 - total flux cleaned = -0.00218223 Jy ! Component: 3600 - total flux cleaned = -0.00229027 Jy ! Component: 3650 - total flux cleaned = -0.00227495 Jy ! Component: 3700 - total flux cleaned = -0.00229013 Jy ! Component: 3750 - total flux cleaned = -0.00236559 Jy ! Component: 3800 - total flux cleaned = -0.00239544 Jy ! Component: 3850 - total flux cleaned = -0.00244027 Jy ! Component: 3900 - total flux cleaned = -0.00246993 Jy ! Component: 3950 - total flux cleaned = -0.00245519 Jy ! Component: 4000 - total flux cleaned = -0.00246983 Jy ! Component: 4050 - total flux cleaned = -0.0024552 Jy ! Total flux subtracted in 4096 components = -0.00241188 Jy ! Clean residual min=-0.001091 max=0.001014 Jy/beam ! Clean residual mean=-0.000000 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.0719309 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 346 components and 0.0719309 Jy ![Exited script file: muppet] wmap "J1327-1336_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.854 x 6.928 at -3.902 degrees (North through East) ! Clean map min=-0.0014774 max=0.071357 Jy/beam ! Writing clean map to FITS file: J1327-1336_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0713572 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000261059 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09755 1.09755 2.19509 4.39018 8.78036 17.5607 35.1214 70.2429 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.854 x 6.928 at -3.902 degrees (North through East) ! Clean map min=-0.0014774 max=0.071357 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1327-1336_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:55:35 2019