! Started logfile: J1327+2210_S_2017_07_09_pus_uvs.log on Wed May 8 14:49:11 2019 obs J1327+2210_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1327+2210_S_2017_07_09_pus_uva.fits ! AN table 1: 65 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.157607 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1327+2210 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1327+2210_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 556 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 556 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 556 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 606 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.624815Jy sigma=0.006050 ! Fit after self-cal, rms=0.608653Jy sigma=0.006025 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=7.916 mas, bpa=-21.85 degrees ! Estimated noise=2787.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299528 Jy ! Component: 100 - total flux cleaned = 0.376853 Jy ! Total flux subtracted in 100 components = 0.376853 Jy ! Clean residual min=-0.017693 max=0.031439 Jy/beam ! Clean residual mean=-0.000057 rms=0.005294 Jy/beam ! Combined flux in latest and established models = 0.376853 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.376853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097364Jy sigma=0.000906 ! Fit after self-cal, rms=0.097319Jy sigma=0.000905 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320878 Jy ! Component: 100 - total flux cleaned = 0.0492716 Jy ! Total flux subtracted in 100 components = 0.0492716 Jy ! Clean residual min=-0.013801 max=0.014703 Jy/beam ! Clean residual mean=-0.000028 rms=0.003456 Jy/beam ! Combined flux in latest and established models = 0.426125 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.426125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084655Jy sigma=0.000785 ! Fit after self-cal, rms=0.084559Jy sigma=0.000784 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=8.506 mas, bpa=-20.68 degrees ! Estimated noise=2025.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130694 Jy ! Component: 100 - total flux cleaned = 0.0197157 Jy ! Component: 150 - total flux cleaned = 0.021817 Jy ! Component: 200 - total flux cleaned = 0.0228432 Jy ! Total flux subtracted in 200 components = 0.0228432 Jy ! Clean residual min=-0.008142 max=0.009323 Jy/beam ! Clean residual mean=-0.000025 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 0.448968 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 64 components and 0.448968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082151Jy sigma=0.000765 ! Fit after self-cal, rms=0.082106Jy sigma=0.000764 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.95 HN 0.96 KP 0.99 ! LA 1.02 MK 1.00 NL 0.89 OV 1.01 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.00 HN 1.00 KP 0.97 ! LA 0.96 MK 0.98 NL 1.02 OV 1.07 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.03 KP 0.97 ! LA 1.00 MK 1.01 NL 1.00 OV 0.94 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.31 HN 0.95 KP 1.00* ! LA 0.84 MK 1.16 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.082106Jy sigma=0.000764 ! Fit after self-cal, rms=0.072640Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=8.538 mas, bpa=-20.63 degrees ! Estimated noise=2017.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.26525e-05 Jy ! Component: 100 - total flux cleaned = 0.000417275 Jy ! Component: 150 - total flux cleaned = 0.000660899 Jy ! Component: 200 - total flux cleaned = 0.000662585 Jy ! Total flux subtracted in 200 components = 0.000662585 Jy ! Clean residual min=-0.004778 max=0.005741 Jy/beam ! Clean residual mean=-0.000005 rms=0.001385 Jy/beam ! Combined flux in latest and established models = 0.44963 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.44963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072525Jy sigma=0.000671 ! Fit after self-cal, rms=0.072483Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072483Jy sigma=0.000671 ! Fit after self-cal, rms=0.072549Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.33 mas, bmaj=8.54 mas, bpa=-20.67 degrees ! Estimated noise=2018.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122063 Jy ! Component: 100 - total flux cleaned = 0.000338531 Jy ! Component: 150 - total flux cleaned = 0.000404576 Jy ! Component: 200 - total flux cleaned = 0.000431405 Jy ! Total flux subtracted in 200 components = 0.000431405 Jy ! Clean residual min=-0.004682 max=0.005664 Jy/beam ! Clean residual mean=-0.000005 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 0.450062 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 79 components and 0.450062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072506Jy sigma=0.000670 ! Fit after self-cal, rms=0.072492Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.64699e-05 Jy ! Component: 100 - total flux cleaned = -8.60544e-05 Jy ! Component: 150 - total flux cleaned = -8.61269e-05 Jy ! Component: 200 - total flux cleaned = -6.23042e-05 Jy ! Total flux subtracted in 200 components = -6.23042e-05 Jy ! Clean residual min=-0.004689 max=0.005615 Jy/beam ! Clean residual mean=-0.000005 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.45 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.45 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072471Jy sigma=0.000670 ! Fit after self-cal, rms=0.072463Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072463Jy sigma=0.000670 ! Fit after self-cal, rms=0.072516Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.332 mas, bmaj=8.542 mas, bpa=-20.69 degrees ! Estimated noise=2019.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160128 Jy ! Component: 100 - total flux cleaned = 0.00018637 Jy ! Component: 150 - total flux cleaned = 0.000209098 Jy ! Component: 200 - total flux cleaned = 0.000249599 Jy ! Total flux subtracted in 200 components = 0.000249599 Jy ! Clean residual min=-0.004674 max=0.005566 Jy/beam ! Clean residual mean=-0.000005 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.450249 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 89 components and 0.450249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072498Jy sigma=0.000670 ! Fit after self-cal, rms=0.072492Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.16383e-05 Jy ! Component: 100 - total flux cleaned = -6.1126e-05 Jy ! Component: 150 - total flux cleaned = -6.09442e-05 Jy ! Component: 200 - total flux cleaned = -4.37524e-05 Jy ! Total flux subtracted in 200 components = -4.37524e-05 Jy ! Clean residual min=-0.004679 max=0.005543 Jy/beam ! Clean residual mean=-0.000005 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.450205 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 90 components and 0.450205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072482Jy sigma=0.000670 ! Fit after self-cal, rms=0.072478Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072478Jy sigma=0.000670 ! Fit after self-cal, rms=0.072523Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.796 mas, bmaj=10.38 mas, bpa=-14.48 degrees ! Estimated noise=2435.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378865 Jy ! Component: 100 - total flux cleaned = -0.000431443 Jy ! Component: 150 - total flux cleaned = -0.000474777 Jy ! Component: 200 - total flux cleaned = -0.000511974 Jy ! Total flux subtracted in 200 components = -0.000511974 Jy ! Clean residual min=-0.005790 max=0.005661 Jy/beam ! Clean residual mean=-0.000012 rms=0.001789 Jy/beam ! Combined flux in latest and established models = 0.449693 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.449694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072517Jy sigma=0.000670 ! Fit after self-cal, rms=0.072514Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.90418e-05 Jy ! Component: 100 - total flux cleaned = -4.78784e-05 Jy ! Component: 150 - total flux cleaned = -4.84781e-05 Jy ! Component: 200 - total flux cleaned = -6.23998e-05 Jy ! Total flux subtracted in 200 components = -6.23998e-05 Jy ! Clean residual min=-0.005810 max=0.005648 Jy/beam ! Clean residual mean=-0.000012 rms=0.001783 Jy/beam ! Combined flux in latest and established models = 0.449631 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 100 components and 0.449631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072517Jy sigma=0.000669 ! Fit after self-cal, rms=0.072515Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=8.544 mas, bpa=-20.71 degrees ! Estimated noise=2020.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.334 x 8.544 at -20.71 degrees (North through East) ! Clean map min=-0.0046957 max=0.38932 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=7.946 mas, bpa=-21.82 degrees ! Estimated noise=2786.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299293 Jy ! Component: 100 - total flux cleaned = 0.375475 Jy ! Component: 150 - total flux cleaned = 0.406297 Jy ! Component: 200 - total flux cleaned = 0.422036 Jy ! Total flux subtracted in 200 components = 0.422036 Jy ! Clean residual min=-0.010104 max=0.009992 Jy/beam ! Clean residual mean=-0.000020 rms=0.002701 Jy/beam ! Combined flux in latest and established models = 0.422036 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.422036 Jy ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=8.544 mas, bpa=-20.71 degrees ! Estimated noise=2020.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124396 Jy ! Component: 100 - total flux cleaned = 0.0191668 Jy ! Component: 150 - total flux cleaned = 0.023401 Jy ! Component: 200 - total flux cleaned = 0.0250509 Jy ! Total flux subtracted in 200 components = 0.0250509 Jy ! Clean residual min=-0.005333 max=0.005304 Jy/beam ! Clean residual mean=-0.000009 rms=0.001424 Jy/beam ! Combined flux in latest and established models = 0.447087 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 54 components and 0.447087 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.796 mas, bmaj=10.38 mas, bpa=-14.48 degrees ! Estimated noise=2435.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234706 Jy ! Component: 100 - total flux cleaned = 0.00253348 Jy ! Component: 150 - total flux cleaned = 0.00273121 Jy ! Component: 200 - total flux cleaned = 0.0026895 Jy ! Total flux subtracted in 200 components = 0.0026895 Jy ! Clean residual min=-0.005661 max=0.005849 Jy/beam ! Clean residual mean=-0.000012 rms=0.001819 Jy/beam ! Combined flux in latest and established models = 0.449776 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.79053e-06 Jy ! Component: 100 - total flux cleaned = -3.23116e-05 Jy ! Component: 150 - total flux cleaned = -3.21679e-05 Jy ! Component: 200 - total flux cleaned = -6.04686e-05 Jy ! Total flux subtracted in 200 components = -6.04686e-05 Jy ! Clean residual min=-0.005686 max=0.005803 Jy/beam ! Clean residual mean=-0.000012 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 0.449716 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 69 components and 0.449716 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=8.544 mas, bpa=-20.71 degrees ! Estimated noise=2020.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.36842e-05 Jy ! Component: 100 - total flux cleaned = 0.000103842 Jy ! Component: 150 - total flux cleaned = 0.000158856 Jy ! Component: 200 - total flux cleaned = 0.000210838 Jy ! Total flux subtracted in 200 components = 0.000210838 Jy ! Clean residual min=-0.004833 max=0.005281 Jy/beam ! Clean residual mean=-0.000006 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.449927 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.449927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072637Jy sigma=0.000670 ! Fit after self-cal, rms=0.072601Jy sigma=0.000670 wmodel J1327+2210_S_2017_07_09_pus_map.mod ! Writing 80 model components to file: J1327+2210_S_2017_07_09_pus_map.mod wobs J1327+2210_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1327+2210_S_2017_07_09_pus_uvs.fits wwins J1327+2210_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J1327+2210_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109123 Jy ! Component: 100 - total flux cleaned = 0.000923804 Jy ! Component: 150 - total flux cleaned = 0.0006117 Jy ! Component: 200 - total flux cleaned = 0.000392907 Jy ! Component: 250 - total flux cleaned = 0.000466902 Jy ! Component: 300 - total flux cleaned = 0.000467326 Jy ! Component: 350 - total flux cleaned = 0.000403047 Jy ! Component: 400 - total flux cleaned = 0.000342106 Jy ! Component: 450 - total flux cleaned = 0.000400832 Jy ! Component: 500 - total flux cleaned = 0.000229814 Jy ! Component: 550 - total flux cleaned = 6.80363e-05 Jy ! Component: 600 - total flux cleaned = 1.79097e-05 Jy ! Component: 650 - total flux cleaned = -0.000184396 Jy ! Component: 700 - total flux cleaned = -0.000331861 Jy ! Component: 750 - total flux cleaned = -0.00047641 Jy ! Component: 800 - total flux cleaned = -0.000524493 Jy ! Component: 850 - total flux cleaned = -0.000571463 Jy ! Component: 900 - total flux cleaned = -0.000616087 Jy ! Component: 950 - total flux cleaned = -0.000485597 Jy ! Component: 1000 - total flux cleaned = -0.000317096 Jy ! Component: 1050 - total flux cleaned = -0.000316486 Jy ! Component: 1100 - total flux cleaned = -0.000154251 Jy ! Component: 1150 - total flux cleaned = -3.62995e-05 Jy ! Component: 1200 - total flux cleaned = 4.02253e-05 Jy ! Component: 1250 - total flux cleaned = 0.000192324 Jy ! Component: 1300 - total flux cleaned = 0.000304366 Jy ! Component: 1350 - total flux cleaned = 0.000486966 Jy ! Component: 1400 - total flux cleaned = 0.000630262 Jy ! Component: 1450 - total flux cleaned = 0.000875129 Jy ! Component: 1500 - total flux cleaned = 0.000909055 Jy ! Component: 1550 - total flux cleaned = 0.000976339 Jy ! Component: 1600 - total flux cleaned = 0.000943196 Jy ! Component: 1650 - total flux cleaned = 0.00104137 Jy ! Component: 1700 - total flux cleaned = 0.00113633 Jy ! Component: 1750 - total flux cleaned = 0.00119905 Jy ! Component: 1800 - total flux cleaned = 0.00119919 Jy ! Component: 1850 - total flux cleaned = 0.0011694 Jy ! Component: 1900 - total flux cleaned = 0.00128815 Jy ! Component: 1950 - total flux cleaned = 0.00131688 Jy ! Component: 2000 - total flux cleaned = 0.00131709 Jy ! Component: 2050 - total flux cleaned = 0.00134495 Jy ! Component: 2100 - total flux cleaned = 0.00134441 Jy ! Component: 2150 - total flux cleaned = 0.0013165 Jy ! Component: 2200 - total flux cleaned = 0.00128954 Jy ! Component: 2250 - total flux cleaned = 0.00128944 Jy ! Component: 2300 - total flux cleaned = 0.00128961 Jy ! Component: 2350 - total flux cleaned = 0.00144459 Jy ! Component: 2400 - total flux cleaned = 0.00146969 Jy ! Component: 2450 - total flux cleaned = 0.00157026 Jy ! Component: 2500 - total flux cleaned = 0.00164483 Jy ! Component: 2550 - total flux cleaned = 0.00174341 Jy ! Component: 2600 - total flux cleaned = 0.00181658 Jy ! Component: 2650 - total flux cleaned = 0.00193654 Jy ! Component: 2700 - total flux cleaned = 0.00198349 Jy ! Component: 2750 - total flux cleaned = 0.00200678 Jy ! Component: 2800 - total flux cleaned = 0.00209947 Jy ! Component: 2850 - total flux cleaned = 0.00203072 Jy ! Component: 2900 - total flux cleaned = 0.00216629 Jy ! Component: 2950 - total flux cleaned = 0.00216611 Jy ! Component: 3000 - total flux cleaned = 0.00216586 Jy ! Component: 3050 - total flux cleaned = 0.00216608 Jy ! Component: 3100 - total flux cleaned = 0.00218772 Jy ! Component: 3150 - total flux cleaned = 0.00225163 Jy ! Component: 3200 - total flux cleaned = 0.00237832 Jy ! Component: 3250 - total flux cleaned = 0.00233673 Jy ! Component: 3300 - total flux cleaned = 0.00248186 Jy ! Component: 3350 - total flux cleaned = 0.00252289 Jy ! Component: 3400 - total flux cleaned = 0.00252283 Jy ! Component: 3450 - total flux cleaned = 0.00248254 Jy ! Component: 3500 - total flux cleaned = 0.00248245 Jy ! Component: 3550 - total flux cleaned = 0.00236381 Jy ! Component: 3600 - total flux cleaned = 0.00232493 Jy ! Component: 3650 - total flux cleaned = 0.00230538 Jy ! Component: 3700 - total flux cleaned = 0.00220886 Jy ! Component: 3750 - total flux cleaned = 0.00213209 Jy ! Component: 3800 - total flux cleaned = 0.00207482 Jy ! Component: 3850 - total flux cleaned = 0.00199918 Jy ! Component: 3900 - total flux cleaned = 0.0019802 Jy ! Component: 3950 - total flux cleaned = 0.00183101 Jy ! Component: 4000 - total flux cleaned = 0.00181244 Jy ! Component: 4050 - total flux cleaned = 0.00166506 Jy ! Total flux subtracted in 4096 components = 0.00157359 Jy ! Clean residual min=-0.001009 max=0.001107 Jy/beam ! Clean residual mean=-0.000001 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.4515 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 342 components and 0.4515 Jy ![Exited script file: muppet] wmap "J1327+2210_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.334 x 8.544 at -20.71 degrees (North through East) ! Clean map min=-0.0024506 max=0.38987 Jy/beam ! Writing clean map to FITS file: J1327+2210_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.389866 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000311542 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.23973 0.23973 0.479461 0.958921 1.91784 3.83569 7.67137 15.3427 30.6855 61.371 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.389 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.334 x 8.544 at -20.71 degrees (North through East) ! Clean map min=-0.0024506 max=0.38987 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1327+2210_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:49:15 2019