! Started logfile: J1326-1651_S_2017_10_21_pus_uvs.log on Sat May 11 20:58:51 2019 obs J1326-1651_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1326-1651_S_2017_10_21_pus_uva.fits ! AN table 1: 235 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.836879 visibilities/baseline/integration-bin. ! Found source: J1326-1651 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 28320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1326-1651_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 982 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.975538Jy sigma=0.008328 ! Fit after self-cal, rms=0.923805Jy sigma=0.007897 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.492 mas, bmaj=16.25 mas, bpa=-18.69 degrees ! Estimated noise=1070.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060312 Jy ! Component: 100 - total flux cleaned = 0.0735357 Jy ! Total flux subtracted in 100 components = 0.0735357 Jy ! Clean residual min=-0.003785 max=0.004184 Jy/beam ! Clean residual mean=-0.000005 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.0735357 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0735357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091817Jy sigma=0.000724 ! Fit after self-cal, rms=0.091510Jy sigma=0.000721 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=19 mas, bpa=-18.12 degrees ! Estimated noise=564.707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618941 Jy ! Component: 100 - total flux cleaned = 0.00926933 Jy ! Component: 150 - total flux cleaned = 0.0112355 Jy ! Component: 200 - total flux cleaned = 0.0126044 Jy ! Total flux subtracted in 200 components = 0.0126044 Jy ! Clean residual min=-0.002426 max=0.002432 Jy/beam ! Clean residual mean=-0.000013 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0861402 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 51 components and 0.0861402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091018Jy sigma=0.000718 ! Fit after self-cal, rms=0.091008Jy sigma=0.000718 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00 KP 1.14 ! LA 1.02 MK 0.99 NL 0.91 OV 1.01 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.03 KP 1.08 ! LA 1.00 MK 1.03 NL 1.04 OV 1.03 ! PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.46 FD 1.06 HN 1.01 KP 1.06 ! LA 0.82 MK 1.03 NL 1.14 OV 0.93 ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.99 KP 1.00* ! LA 0.78 MK 1.03 NL 1.00* OV 1.00* ! PT 0.82 ! ! ! Fit before self-cal, rms=0.091008Jy sigma=0.000718 ! Fit after self-cal, rms=0.088857Jy sigma=0.000714 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=19.22 mas, bpa=-18.09 degrees ! Estimated noise=562.588 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033294 Jy ! Component: 100 - total flux cleaned = -0.000455121 Jy ! Component: 150 - total flux cleaned = -0.000505489 Jy ! Component: 200 - total flux cleaned = -0.000520261 Jy ! Total flux subtracted in 200 components = -0.000520261 Jy ! Clean residual min=-0.001726 max=0.001546 Jy/beam ! Clean residual mean=-0.000004 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0856199 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.0856199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088848Jy sigma=0.000714 ! Fit after self-cal, rms=0.088925Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088925Jy sigma=0.000713 ! Fit after self-cal, rms=0.089257Jy sigma=0.000713 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=19.25 mas, bpa=-18.06 degrees ! Estimated noise=562.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018046 Jy ! Component: 100 - total flux cleaned = -0.000193631 Jy ! Component: 150 - total flux cleaned = -0.000205713 Jy ! Component: 200 - total flux cleaned = -0.000184259 Jy ! Total flux subtracted in 200 components = -0.000184259 Jy ! Clean residual min=-0.001574 max=0.001439 Jy/beam ! Clean residual mean=-0.000003 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0854357 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.0854357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089252Jy sigma=0.000713 ! Fit after self-cal, rms=0.089315Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.95646e-05 Jy ! Component: 100 - total flux cleaned = 2.9279e-05 Jy ! Component: 150 - total flux cleaned = 2.95138e-05 Jy ! Component: 200 - total flux cleaned = 2.94228e-05 Jy ! Total flux subtracted in 200 components = 2.94228e-05 Jy ! Clean residual min=-0.001551 max=0.001473 Jy/beam ! Clean residual mean=-0.000004 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0854651 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 77 components and 0.0854651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089313Jy sigma=0.000713 ! Fit after self-cal, rms=0.089311Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089311Jy sigma=0.000713 ! Fit after self-cal, rms=0.089526Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=19.26 mas, bpa=-18.05 degrees ! Estimated noise=562.277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126948 Jy ! Component: 100 - total flux cleaned = -0.000126984 Jy ! Component: 150 - total flux cleaned = -0.000135093 Jy ! Component: 200 - total flux cleaned = -0.000134998 Jy ! Total flux subtracted in 200 components = -0.000134998 Jy ! Clean residual min=-0.001579 max=0.001475 Jy/beam ! Clean residual mean=-0.000003 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0853301 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.0853301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089523Jy sigma=0.000713 ! Fit after self-cal, rms=0.089553Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.79439e-07 Jy ! Component: 100 - total flux cleaned = -4.02601e-07 Jy ! Component: 150 - total flux cleaned = -5.79312e-07 Jy ! Component: 200 - total flux cleaned = -7.15965e-06 Jy ! Total flux subtracted in 200 components = -7.15965e-06 Jy ! Clean residual min=-0.001596 max=0.001472 Jy/beam ! Clean residual mean=-0.000003 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0853229 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.085323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089552Jy sigma=0.000712 ! Fit after self-cal, rms=0.089549Jy sigma=0.000712 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089549Jy sigma=0.000712 ! Fit after self-cal, rms=0.089625Jy sigma=0.000712 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.719 mas, bmaj=26.53 mas, bpa=-10.02 degrees ! Estimated noise=678.219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.06791e-05 Jy ! Component: 100 - total flux cleaned = -2.83541e-05 Jy ! Component: 150 - total flux cleaned = -2.81846e-05 Jy ! Component: 200 - total flux cleaned = -2.82218e-05 Jy ! Total flux subtracted in 200 components = -2.82218e-05 Jy ! Clean residual min=-0.001915 max=0.001575 Jy/beam ! Clean residual mean=-0.000004 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0852947 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 93 components and 0.0852947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089624Jy sigma=0.000712 ! Fit after self-cal, rms=0.089635Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.05913e-05 Jy ! Component: 100 - total flux cleaned = 1.06519e-05 Jy ! Component: 150 - total flux cleaned = 1.06457e-05 Jy ! Component: 200 - total flux cleaned = 1.58e-05 Jy ! Total flux subtracted in 200 components = 1.58e-05 Jy ! Clean residual min=-0.001918 max=0.001601 Jy/beam ! Clean residual mean=-0.000004 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0853105 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 103 components and 0.0853105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089635Jy sigma=0.000712 ! Fit after self-cal, rms=0.089636Jy sigma=0.000712 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=19.26 mas, bpa=-18.04 degrees ! Estimated noise=562.279 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 19.26 at -18.04 degrees (North through East) ! Clean map min=-0.0016112 max=0.078164 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.49 mas, bmaj=16.68 mas, bpa=-18.63 degrees ! Estimated noise=1082.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0608024 Jy ! Component: 100 - total flux cleaned = 0.0741161 Jy ! Component: 150 - total flux cleaned = 0.0779742 Jy ! Component: 200 - total flux cleaned = 0.0802493 Jy ! Total flux subtracted in 200 components = 0.0802493 Jy ! Clean residual min=-0.002051 max=0.002302 Jy/beam ! Clean residual mean=-0.000001 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0802493 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0802493 Jy ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=19.26 mas, bpa=-18.04 degrees ! Estimated noise=562.279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226681 Jy ! Component: 100 - total flux cleaned = 0.00326394 Jy ! Component: 150 - total flux cleaned = 0.00362322 Jy ! Component: 200 - total flux cleaned = 0.00390264 Jy ! Total flux subtracted in 200 components = 0.00390264 Jy ! Clean residual min=-0.001641 max=0.001442 Jy/beam ! Clean residual mean=-0.000003 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0841519 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 46 components and 0.0841519 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.719 mas, bmaj=26.53 mas, bpa=-10.02 degrees ! Estimated noise=678.219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000604682 Jy ! Component: 100 - total flux cleaned = 0.000692585 Jy ! Component: 150 - total flux cleaned = 0.000765279 Jy ! Component: 200 - total flux cleaned = 0.000817217 Jy ! Total flux subtracted in 200 components = 0.000817217 Jy ! Clean residual min=-0.001920 max=0.001590 Jy/beam ! Clean residual mean=-0.000005 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0849692 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.50038e-05 Jy ! Component: 100 - total flux cleaned = 7.72222e-05 Jy ! Component: 150 - total flux cleaned = 0.000104942 Jy ! Component: 200 - total flux cleaned = 0.000130053 Jy ! Total flux subtracted in 200 components = 0.000130053 Jy ! Clean residual min=-0.001898 max=0.001606 Jy/beam ! Clean residual mean=-0.000005 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0850992 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 75 components and 0.0850992 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=19.26 mas, bpa=-18.04 degrees ! Estimated noise=562.279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.70335e-05 Jy ! Component: 100 - total flux cleaned = -0.000142253 Jy ! Component: 150 - total flux cleaned = -0.000193244 Jy ! Component: 200 - total flux cleaned = -0.000237308 Jy ! Total flux subtracted in 200 components = -0.000237308 Jy ! Clean residual min=-0.001629 max=0.001473 Jy/beam ! Clean residual mean=-0.000003 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0848619 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.0848619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089644Jy sigma=0.000713 ! Fit after self-cal, rms=0.089639Jy sigma=0.000713 wmodel J1326-1651_S_2017_10_21_pus_map.mod ! Writing 91 model components to file: J1326-1651_S_2017_10_21_pus_map.mod wobs J1326-1651_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1326-1651_S_2017_10_21_pus_uvs.fits wwins J1326-1651_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1326-1651_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125984 Jy ! Component: 100 - total flux cleaned = -0.000316366 Jy ! Component: 150 - total flux cleaned = -0.000360088 Jy ! Component: 200 - total flux cleaned = -0.000381349 Jy ! Component: 250 - total flux cleaned = -0.000342306 Jy ! Component: 300 - total flux cleaned = -0.000286474 Jy ! Component: 350 - total flux cleaned = -0.000232764 Jy ! Component: 400 - total flux cleaned = -0.000232464 Jy ! Component: 450 - total flux cleaned = -0.000181155 Jy ! Component: 500 - total flux cleaned = -0.000131273 Jy ! Component: 550 - total flux cleaned = -6.57215e-05 Jy ! Component: 600 - total flux cleaned = 1.46112e-05 Jy ! Component: 650 - total flux cleaned = 9.30167e-05 Jy ! Component: 700 - total flux cleaned = 0.000185008 Jy ! Component: 750 - total flux cleaned = 0.000244931 Jy ! Component: 800 - total flux cleaned = 0.00033343 Jy ! Component: 850 - total flux cleaned = 0.000405926 Jy ! Component: 900 - total flux cleaned = 0.000505524 Jy ! Component: 950 - total flux cleaned = 0.00060297 Jy ! Component: 1000 - total flux cleaned = 0.000671186 Jy ! Component: 1050 - total flux cleaned = 0.000751892 Jy ! Component: 1100 - total flux cleaned = 0.000817955 Jy ! Component: 1150 - total flux cleaned = 0.000922187 Jy ! Component: 1200 - total flux cleaned = 0.000999118 Jy ! Component: 1250 - total flux cleaned = 0.00107478 Jy ! Component: 1300 - total flux cleaned = 0.0011371 Jy ! Component: 1350 - total flux cleaned = 0.00116174 Jy ! Component: 1400 - total flux cleaned = 0.00121043 Jy ! Component: 1450 - total flux cleaned = 0.00125839 Jy ! Component: 1500 - total flux cleaned = 0.00130579 Jy ! Component: 1550 - total flux cleaned = 0.00135252 Jy ! Component: 1600 - total flux cleaned = 0.00136397 Jy ! Component: 1650 - total flux cleaned = 0.00139821 Jy ! Component: 1700 - total flux cleaned = 0.00139793 Jy ! Component: 1750 - total flux cleaned = 0.00139803 Jy ! Component: 1800 - total flux cleaned = 0.00143099 Jy ! Component: 1850 - total flux cleaned = 0.00142012 Jy ! Component: 1900 - total flux cleaned = 0.00145248 Jy ! Component: 1950 - total flux cleaned = 0.00145229 Jy ! Component: 2000 - total flux cleaned = 0.00145232 Jy ! Component: 2050 - total flux cleaned = 0.00150432 Jy ! Component: 2100 - total flux cleaned = 0.00149394 Jy ! Component: 2150 - total flux cleaned = 0.00150428 Jy ! Component: 2200 - total flux cleaned = 0.00152452 Jy ! Component: 2250 - total flux cleaned = 0.0015344 Jy ! Component: 2300 - total flux cleaned = 0.00155425 Jy ! Component: 2350 - total flux cleaned = 0.00154444 Jy ! Component: 2400 - total flux cleaned = 0.00157368 Jy ! Component: 2450 - total flux cleaned = 0.001564 Jy ! Component: 2500 - total flux cleaned = 0.00156402 Jy ! Component: 2550 - total flux cleaned = 0.00159255 Jy ! Component: 2600 - total flux cleaned = 0.00158299 Jy ! Component: 2650 - total flux cleaned = 0.00159235 Jy ! Component: 2700 - total flux cleaned = 0.00158307 Jy ! Component: 2750 - total flux cleaned = 0.00158316 Jy ! Component: 2800 - total flux cleaned = 0.00161058 Jy ! Component: 2850 - total flux cleaned = 0.00161956 Jy ! Component: 2900 - total flux cleaned = 0.00159254 Jy ! Component: 2950 - total flux cleaned = 0.00161044 Jy ! Component: 3000 - total flux cleaned = 0.00162814 Jy ! Component: 3050 - total flux cleaned = 0.00162815 Jy ! Component: 3100 - total flux cleaned = 0.00163701 Jy ! Component: 3150 - total flux cleaned = 0.00166305 Jy ! Component: 3200 - total flux cleaned = 0.00164577 Jy ! Component: 3250 - total flux cleaned = 0.00165443 Jy ! Component: 3300 - total flux cleaned = 0.00168855 Jy ! Component: 3350 - total flux cleaned = 0.00171394 Jy ! Component: 3400 - total flux cleaned = 0.00174763 Jy ! Component: 3450 - total flux cleaned = 0.00177269 Jy ! Component: 3500 - total flux cleaned = 0.00178095 Jy ! Component: 3550 - total flux cleaned = 0.00179747 Jy ! Component: 3600 - total flux cleaned = 0.00177286 Jy ! Component: 3650 - total flux cleaned = 0.00180555 Jy ! Component: 3700 - total flux cleaned = 0.00182174 Jy ! Component: 3750 - total flux cleaned = 0.00181366 Jy ! Component: 3800 - total flux cleaned = 0.00182164 Jy ! Component: 3850 - total flux cleaned = 0.00181373 Jy ! Component: 3900 - total flux cleaned = 0.00182957 Jy ! Component: 3950 - total flux cleaned = 0.00182957 Jy ! Component: 4000 - total flux cleaned = 0.00184536 Jy ! Component: 4050 - total flux cleaned = 0.00186879 Jy ! Total flux subtracted in 4096 components = 0.00188432 Jy ! Clean residual min=-0.000402 max=0.000495 Jy/beam ! Clean residual mean=-0.000003 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.0867462 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 375 components and 0.0867462 Jy ![Exited script file: muppet] wmap "J1326-1651_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 19.26 at -18.04 degrees (North through East) ! Clean map min=-0.0011181 max=0.078496 Jy/beam ! Writing clean map to FITS file: J1326-1651_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0784961 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000146529 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.560013 0.560013 1.12003 2.24005 4.4801 8.96021 17.9204 35.8408 71.6817 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.078 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 19.26 at -18.04 degrees (North through East) ! Clean map min=-0.0011181 max=0.078496 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1326-1651_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:58:56 2019