! Started logfile: J1326-1651_S_2017_09_26_pus_uvs.log on Sat May 11 13:01:44 2019 obs J1326-1651_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1326-1651_S_2017_09_26_pus_uva.fits ! AN table 1: 175 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.549365 visibilities/baseline/integration-bin. ! Found source: J1326-1651 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 13844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1326-1651_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 477 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1107 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.960680Jy sigma=0.007072 ! Fit after self-cal, rms=0.930853Jy sigma=0.006874 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.554 mas, bmaj=13.69 mas, bpa=-19.51 degrees ! Estimated noise=1950.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0547686 Jy ! Component: 100 - total flux cleaned = 0.0676202 Jy ! Total flux subtracted in 100 components = 0.0676202 Jy ! Clean residual min=-0.004985 max=0.006084 Jy/beam ! Clean residual mean=-0.000007 rms=0.001342 Jy/beam ! Combined flux in latest and established models = 0.0676202 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0676202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092839Jy sigma=0.000632 ! Fit after self-cal, rms=0.092589Jy sigma=0.000631 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=20.65 mas, bpa=-14.08 degrees ! Estimated noise=957.375 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590641 Jy ! Component: 100 - total flux cleaned = 0.00863085 Jy ! Component: 150 - total flux cleaned = 0.0099802 Jy ! Component: 200 - total flux cleaned = 0.010252 Jy ! Total flux subtracted in 200 components = 0.010252 Jy ! Clean residual min=-0.002067 max=0.002894 Jy/beam ! Clean residual mean=0.000005 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.0778722 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 56 components and 0.0778722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092216Jy sigma=0.000628 ! Fit after self-cal, rms=0.092171Jy sigma=0.000628 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.95 KP 1.00 ! LA 1.00 MK 1.13 NL 0.90 OV 1.02 ! PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.93 KP 0.92 ! LA 1.02 MK 1.09 NL 1.04 OV 1.03 ! PT 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.04 KP 0.95 ! LA 0.96 MK 1.08 NL 1.03 OV 0.95 ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 288 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.79 KP 1.00* ! LA 1.00* MK 0.79 NL 1.00* OV 1.00* ! PT 0.90 ! ! ! Fit before self-cal, rms=0.092171Jy sigma=0.000628 ! Fit after self-cal, rms=0.091026Jy sigma=0.000629 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.577 mas, bmaj=21.81 mas, bpa=-13.43 degrees ! Estimated noise=967.199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232871 Jy ! Component: 100 - total flux cleaned = -0.000148021 Jy ! Component: 150 - total flux cleaned = -7.28682e-05 Jy ! Component: 200 - total flux cleaned = -6.14757e-06 Jy ! Total flux subtracted in 200 components = -6.14757e-06 Jy ! Clean residual min=-0.001952 max=0.002252 Jy/beam ! Clean residual mean=0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.077866 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.077866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091009Jy sigma=0.000629 ! Fit after self-cal, rms=0.090951Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090951Jy sigma=0.000629 ! Fit after self-cal, rms=0.090959Jy sigma=0.000628 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.587 mas, bmaj=22.07 mas, bpa=-13.35 degrees ! Estimated noise=965.264 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00029196 Jy ! Component: 100 - total flux cleaned = 0.000246646 Jy ! Component: 150 - total flux cleaned = 0.000206971 Jy ! Component: 200 - total flux cleaned = 0.000189452 Jy ! Total flux subtracted in 200 components = 0.000189452 Jy ! Clean residual min=-0.001954 max=0.002249 Jy/beam ! Clean residual mean=0.000001 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0780555 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.0780555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090949Jy sigma=0.000628 ! Fit after self-cal, rms=0.090948Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.06799e-05 Jy ! Component: 100 - total flux cleaned = -2.72924e-06 Jy ! Component: 150 - total flux cleaned = -1.80272e-05 Jy ! Component: 200 - total flux cleaned = -1.81012e-05 Jy ! Total flux subtracted in 200 components = -1.81012e-05 Jy ! Clean residual min=-0.001985 max=0.002226 Jy/beam ! Clean residual mean=0.000001 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0780374 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 77 components and 0.0780374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090943Jy sigma=0.000628 ! Fit after self-cal, rms=0.090942Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090942Jy sigma=0.000628 ! Fit after self-cal, rms=0.090709Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.578 mas, bmaj=22.07 mas, bpa=-13.35 degrees ! Estimated noise=963.277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219252 Jy ! Component: 100 - total flux cleaned = 0.000201679 Jy ! Component: 150 - total flux cleaned = 0.000186697 Jy ! Component: 200 - total flux cleaned = 0.000186844 Jy ! Total flux subtracted in 200 components = 0.000186844 Jy ! Clean residual min=-0.001915 max=0.002237 Jy/beam ! Clean residual mean=0.000001 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0782242 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 0.0782242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090703Jy sigma=0.000628 ! Fit after self-cal, rms=0.090701Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.69197e-05 Jy ! Component: 100 - total flux cleaned = 1.77999e-05 Jy ! Component: 150 - total flux cleaned = 1.75514e-05 Jy ! Component: 200 - total flux cleaned = 1.75744e-05 Jy ! Total flux subtracted in 200 components = 1.75744e-05 Jy ! Clean residual min=-0.001916 max=0.002201 Jy/beam ! Clean residual mean=0.000001 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0782418 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.0782418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090697Jy sigma=0.000628 ! Fit after self-cal, rms=0.090697Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090697Jy sigma=0.000628 ! Fit after self-cal, rms=0.090490Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.893 mas, bmaj=26.2 mas, bpa=-7.347 degrees ! Estimated noise=1130.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478416 Jy ! Component: 100 - total flux cleaned = 0.000490505 Jy ! Component: 150 - total flux cleaned = 0.000471513 Jy ! Component: 200 - total flux cleaned = 0.000454597 Jy ! Total flux subtracted in 200 components = 0.000454597 Jy ! Clean residual min=-0.001823 max=0.001852 Jy/beam ! Clean residual mean=0.000001 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0786964 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 87 components and 0.0786964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090489Jy sigma=0.000628 ! Fit after self-cal, rms=0.090489Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.24575e-05 Jy ! Component: 100 - total flux cleaned = 2.28263e-05 Jy ! Component: 150 - total flux cleaned = 4.98725e-06 Jy ! Component: 200 - total flux cleaned = -1.13155e-05 Jy ! Total flux subtracted in 200 components = -1.13155e-05 Jy ! Clean residual min=-0.001802 max=0.001837 Jy/beam ! Clean residual mean=0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0786851 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 89 components and 0.0786851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090488Jy sigma=0.000628 ! Fit after self-cal, rms=0.090488Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=22.05 mas, bpa=-13.37 degrees ! Estimated noise=961.799 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.569 x 22.05 at -13.37 degrees (North through East) ! Clean map min=-0.0019032 max=0.072143 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.637 mas, bmaj=14.37 mas, bpa=-17.99 degrees ! Estimated noise=1984.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0544571 Jy ! Component: 100 - total flux cleaned = 0.0669342 Jy ! Component: 150 - total flux cleaned = 0.0721562 Jy ! Component: 200 - total flux cleaned = 0.0754042 Jy ! Total flux subtracted in 200 components = 0.0754042 Jy ! Clean residual min=-0.004249 max=0.003775 Jy/beam ! Clean residual mean=-0.000003 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.0754042 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0754042 Jy ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=22.05 mas, bpa=-13.37 degrees ! Estimated noise=961.799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235513 Jy ! Component: 100 - total flux cleaned = 0.00305637 Jy ! Component: 150 - total flux cleaned = 0.00333118 Jy ! Component: 200 - total flux cleaned = 0.00342779 Jy ! Total flux subtracted in 200 components = 0.00342779 Jy ! Clean residual min=-0.002175 max=0.002533 Jy/beam ! Clean residual mean=0.000002 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.078832 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 48 components and 0.078832 Jy ! Inverting map ! Added new window around map position (21, 21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00058116 Jy ! Component: 100 - total flux cleaned = -0.000308873 Jy ! Component: 150 - total flux cleaned = -0.000980083 Jy ! Component: 200 - total flux cleaned = -0.00158486 Jy ! Total flux subtracted in 200 components = -0.00158486 Jy ! Clean residual min=-0.001617 max=0.001719 Jy/beam ! Clean residual mean=0.000002 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0772472 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 0.0772472 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.893 mas, bmaj=26.2 mas, bpa=-7.347 degrees ! Estimated noise=1130.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000362927 Jy ! Component: 100 - total flux cleaned = -0.000657394 Jy ! Component: 150 - total flux cleaned = -0.000871494 Jy ! Component: 200 - total flux cleaned = -0.000966917 Jy ! Total flux subtracted in 200 components = -0.000966917 Jy ! Clean residual min=-0.001400 max=0.001554 Jy/beam ! Clean residual mean=0.000005 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0762803 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.55888e-05 Jy ! Component: 100 - total flux cleaned = -0.000149001 Jy ! Component: 150 - total flux cleaned = -0.00023666 Jy ! Component: 200 - total flux cleaned = -0.000291823 Jy ! Total flux subtracted in 200 components = -0.000291823 Jy ! Clean residual min=-0.001355 max=0.001525 Jy/beam ! Clean residual mean=0.000005 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0759884 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 117 components and 0.0759884 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=22.05 mas, bpa=-13.37 degrees ! Estimated noise=961.799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.19737e-05 Jy ! Component: 100 - total flux cleaned = 2.10489e-06 Jy ! Component: 150 - total flux cleaned = -5.30335e-05 Jy ! Component: 200 - total flux cleaned = -0.000128701 Jy ! Total flux subtracted in 200 components = -0.000128701 Jy ! Clean residual min=-0.001511 max=0.001688 Jy/beam ! Clean residual mean=0.000004 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0758597 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 137 components and 0.0758597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090407Jy sigma=0.000627 ! Fit after self-cal, rms=0.090382Jy sigma=0.000627 wmodel J1326-1651_S_2017_09_26_pus_map.mod ! Writing 137 model components to file: J1326-1651_S_2017_09_26_pus_map.mod wobs J1326-1651_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1326-1651_S_2017_09_26_pus_uvs.fits wwins J1326-1651_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J1326-1651_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510408 Jy ! Component: 100 - total flux cleaned = 0.000588743 Jy ! Component: 150 - total flux cleaned = 0.000589199 Jy ! Component: 200 - total flux cleaned = 0.000681641 Jy ! Component: 250 - total flux cleaned = 0.000770636 Jy ! Component: 300 - total flux cleaned = 0.000834722 Jy ! Component: 350 - total flux cleaned = 0.000793477 Jy ! Component: 400 - total flux cleaned = 0.000734308 Jy ! Component: 450 - total flux cleaned = 0.000677014 Jy ! Component: 500 - total flux cleaned = 0.000620798 Jy ! Component: 550 - total flux cleaned = 0.000530703 Jy ! Component: 600 - total flux cleaned = 0.000495731 Jy ! Component: 650 - total flux cleaned = 0.000427234 Jy ! Component: 700 - total flux cleaned = 0.000310735 Jy ! Component: 750 - total flux cleaned = 0.000311112 Jy ! Component: 800 - total flux cleaned = 0.000247505 Jy ! Component: 850 - total flux cleaned = 0.000201152 Jy ! Component: 900 - total flux cleaned = 0.00018582 Jy ! Component: 950 - total flux cleaned = 0.000111293 Jy ! Component: 1000 - total flux cleaned = 8.23451e-05 Jy ! Component: 1050 - total flux cleaned = 5.39674e-05 Jy ! Component: 1100 - total flux cleaned = 5.39311e-05 Jy ! Component: 1150 - total flux cleaned = 5.36694e-05 Jy ! Component: 1200 - total flux cleaned = 1.24912e-05 Jy ! Component: 1250 - total flux cleaned = 2.59455e-05 Jy ! Component: 1300 - total flux cleaned = -4.31182e-07 Jy ! Component: 1350 - total flux cleaned = -2.03678e-07 Jy ! Component: 1400 - total flux cleaned = 1.27879e-05 Jy ! Component: 1450 - total flux cleaned = 1.29621e-05 Jy ! Component: 1500 - total flux cleaned = 2.54421e-05 Jy ! Component: 1550 - total flux cleaned = 3.78213e-05 Jy ! Component: 1600 - total flux cleaned = 3.75734e-05 Jy ! Component: 1650 - total flux cleaned = 1.31984e-06 Jy ! Component: 1700 - total flux cleaned = 2.50935e-05 Jy ! Component: 1750 - total flux cleaned = -2.21371e-05 Jy ! Component: 1800 - total flux cleaned = -3.37401e-05 Jy ! Component: 1850 - total flux cleaned = -6.84623e-05 Jy ! Component: 1900 - total flux cleaned = -9.14172e-05 Jy ! Component: 1950 - total flux cleaned = -0.000148127 Jy ! Component: 2000 - total flux cleaned = -0.000192905 Jy ! Component: 2050 - total flux cleaned = -0.000226318 Jy ! Component: 2100 - total flux cleaned = -0.000248294 Jy ! Component: 2150 - total flux cleaned = -0.000292219 Jy ! Component: 2200 - total flux cleaned = -0.000324742 Jy ! Component: 2250 - total flux cleaned = -0.000389112 Jy ! Component: 2300 - total flux cleaned = -0.00042106 Jy ! Component: 2350 - total flux cleaned = -0.000473913 Jy ! Component: 2400 - total flux cleaned = -0.000494819 Jy ! Component: 2450 - total flux cleaned = -0.000557267 Jy ! Component: 2500 - total flux cleaned = -0.000598724 Jy ! Component: 2550 - total flux cleaned = -0.000639901 Jy ! Component: 2600 - total flux cleaned = -0.000690968 Jy ! Component: 2650 - total flux cleaned = -0.000731609 Jy ! Component: 2700 - total flux cleaned = -0.000761899 Jy ! Component: 2750 - total flux cleaned = -0.000812168 Jy ! Component: 2800 - total flux cleaned = -0.000822145 Jy ! Component: 2850 - total flux cleaned = -0.000842083 Jy ! Component: 2900 - total flux cleaned = -0.000871794 Jy ! Component: 2950 - total flux cleaned = -0.000871703 Jy ! Component: 3000 - total flux cleaned = -0.000871695 Jy ! Component: 3050 - total flux cleaned = -0.000871733 Jy ! Component: 3100 - total flux cleaned = -0.000852159 Jy ! Component: 3150 - total flux cleaned = -0.00088149 Jy ! Component: 3200 - total flux cleaned = -0.000881413 Jy ! Component: 3250 - total flux cleaned = -0.000881337 Jy ! Component: 3300 - total flux cleaned = -0.000890979 Jy ! Component: 3350 - total flux cleaned = -0.000890983 Jy ! Component: 3400 - total flux cleaned = -0.00088128 Jy ! Component: 3450 - total flux cleaned = -0.000881234 Jy ! Component: 3500 - total flux cleaned = -0.000861944 Jy ! Component: 3550 - total flux cleaned = -0.000871522 Jy ! Component: 3600 - total flux cleaned = -0.000871522 Jy ! Component: 3650 - total flux cleaned = -0.000852347 Jy ! Component: 3700 - total flux cleaned = -0.000833158 Jy ! Component: 3750 - total flux cleaned = -0.000833189 Jy ! Component: 3800 - total flux cleaned = -0.000842742 Jy ! Component: 3850 - total flux cleaned = -0.000785262 Jy ! Component: 3900 - total flux cleaned = -0.000775743 Jy ! Component: 3950 - total flux cleaned = -0.000766137 Jy ! Component: 4000 - total flux cleaned = -0.00076608 Jy ! Component: 4050 - total flux cleaned = -0.000775664 Jy ! Total flux subtracted in 4096 components = -0.000766082 Jy ! Clean residual min=-0.000589 max=0.000550 Jy/beam ! Clean residual mean=0.000002 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.0750936 Jy keep ! Adding 214 model components to the UV plane model. ! The established model now contains 350 components and 0.0750936 Jy ![Exited script file: muppet] wmap "J1326-1651_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.569 x 22.05 at -13.37 degrees (North through East) ! Clean map min=-0.001778 max=0.071035 Jy/beam ! Writing clean map to FITS file: J1326-1651_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.071035 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000170204 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.718817 0.718817 1.43763 2.87527 5.75054 11.5011 23.0021 46.0043 92.0086 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.569 x 22.05 at -13.37 degrees (North through East) ! Clean map min=-0.001778 max=0.071035 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1326-1651_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:01:49 2019