! Started logfile: J1326+5712_S_2017_02_24_pus_uvs.log on Sat May 4 11:27:55 2019 obs J1326+5712_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1326+5712_S_2017_02_24_pus_uva.fits ! AN table 1: 111 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.847848 visibilities/baseline/integration-bin. ! Found source: J1326+5712 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 16940 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1326+5712_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 429 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.801211Jy sigma=0.007561 ! Fit after self-cal, rms=0.790632Jy sigma=0.007463 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=4.538 mas, bpa=-13.6 degrees ! Estimated noise=1047.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158333 Jy ! Component: 100 - total flux cleaned = 0.232144 Jy ! Total flux subtracted in 100 components = 0.232144 Jy ! Clean residual min=-0.013727 max=0.037555 Jy/beam ! Clean residual mean=0.000077 rms=0.004272 Jy/beam ! Combined flux in latest and established models = 0.232144 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.232144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122220Jy sigma=0.001157 ! Fit after self-cal, rms=0.120376Jy sigma=0.001140 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0486822 Jy ! Component: 100 - total flux cleaned = 0.0780364 Jy ! Total flux subtracted in 100 components = 0.0780364 Jy ! Clean residual min=-0.007169 max=0.019364 Jy/beam ! Clean residual mean=0.000043 rms=0.002139 Jy/beam ! Combined flux in latest and established models = 0.31018 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.31018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090209Jy sigma=0.000831 ! Fit after self-cal, rms=0.089496Jy sigma=0.000824 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214132 Jy ! Component: 100 - total flux cleaned = 0.0349233 Jy ! Total flux subtracted in 100 components = 0.0349233 Jy ! Clean residual min=-0.004887 max=0.011991 Jy/beam ! Clean residual mean=0.000028 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.345104 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.345104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081276Jy sigma=0.000741 ! Fit after self-cal, rms=0.081148Jy sigma=0.000739 ! Inverting map ! Added new window around map position (1, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113439 Jy ! Component: 100 - total flux cleaned = 0.0188884 Jy ! Total flux subtracted in 100 components = 0.0188884 Jy ! Clean residual min=-0.004118 max=0.004740 Jy/beam ! Clean residual mean=0.000020 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.363992 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.363992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078517Jy sigma=0.000713 ! Fit after self-cal, rms=0.078489Jy sigma=0.000713 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.86 mas, bmaj=5.209 mas, bpa=-11.82 degrees ! Estimated noise=620.965 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101323 Jy ! Component: 100 - total flux cleaned = 0.0163928 Jy ! Component: 150 - total flux cleaned = 0.020485 Jy ! Component: 200 - total flux cleaned = 0.0231896 Jy ! Total flux subtracted in 200 components = 0.0231896 Jy ! Clean residual min=-0.003219 max=0.003478 Jy/beam ! Clean residual mean=0.000028 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.387182 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.387182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076965Jy sigma=0.000700 ! Fit after self-cal, rms=0.076936Jy sigma=0.000699 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 1.02 KP 0.96 ! LA 0.96 MK 0.99 NL 0.99 OV 1.02 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.07 KP 0.92 ! LA 0.92 MK 1.01 NL 0.97 OV 1.07 ! PT 0.97 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.03 KP 1.02 ! LA 1.04 MK 1.03 NL 1.08 OV 0.98 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.06 HN 1.00 KP 1.00* ! LA 1.02 MK 1.02 NL 1.00* OV 1.02 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.076936Jy sigma=0.000699 ! Fit after self-cal, rms=0.074873Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.876 mas, bmaj=5.223 mas, bpa=-11.45 degrees ! Estimated noise=623.103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219338 Jy ! Component: 100 - total flux cleaned = -0.000287986 Jy ! Component: 150 - total flux cleaned = -0.000290006 Jy ! Component: 200 - total flux cleaned = -0.000291003 Jy ! Total flux subtracted in 200 components = -0.000291003 Jy ! Clean residual min=-0.002548 max=0.002787 Jy/beam ! Clean residual mean=0.000010 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.386891 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 77 components and 0.386891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074775Jy sigma=0.000679 ! Fit after self-cal, rms=0.074764Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074764Jy sigma=0.000679 ! Fit after self-cal, rms=0.074392Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=5.243 mas, bpa=-11.66 degrees ! Estimated noise=623.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109995 Jy ! Component: 100 - total flux cleaned = -1.42211e-05 Jy ! Component: 150 - total flux cleaned = 7.05369e-05 Jy ! Component: 200 - total flux cleaned = 0.000148224 Jy ! Total flux subtracted in 200 components = 0.000148224 Jy ! Clean residual min=-0.002340 max=0.002281 Jy/beam ! Clean residual mean=-0.000002 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.387039 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 0.387039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074334Jy sigma=0.000675 ! Fit after self-cal, rms=0.074325Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.91004e-05 Jy ! Component: 100 - total flux cleaned = 3.94258e-06 Jy ! Component: 150 - total flux cleaned = 7.87686e-05 Jy ! Component: 200 - total flux cleaned = 0.000147279 Jy ! Total flux subtracted in 200 components = 0.000147279 Jy ! Clean residual min=-0.002249 max=0.002218 Jy/beam ! Clean residual mean=-0.000002 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.387186 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.387186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074282Jy sigma=0.000675 ! Fit after self-cal, rms=0.074279Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074279Jy sigma=0.000675 ! Fit after self-cal, rms=0.074245Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=5.24 mas, bpa=-11.84 degrees ! Estimated noise=622.949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175061 Jy ! Component: 100 - total flux cleaned = -6.41585e-05 Jy ! Component: 150 - total flux cleaned = 3.3772e-06 Jy ! Component: 200 - total flux cleaned = 3.4201e-05 Jy ! Total flux subtracted in 200 components = 3.4201e-05 Jy ! Clean residual min=-0.002154 max=0.002182 Jy/beam ! Clean residual mean=-0.000002 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.38722 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.38722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074209Jy sigma=0.000675 ! Fit after self-cal, rms=0.074206Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.54527e-05 Jy ! Component: 100 - total flux cleaned = 5.65225e-07 Jy ! Component: 150 - total flux cleaned = 6.18016e-05 Jy ! Component: 200 - total flux cleaned = 9.16874e-05 Jy ! Total flux subtracted in 200 components = 9.16874e-05 Jy ! Clean residual min=-0.002106 max=0.002138 Jy/beam ! Clean residual mean=-0.000002 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.387312 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.387312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074177Jy sigma=0.000674 ! Fit after self-cal, rms=0.074176Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074176Jy sigma=0.000674 ! Fit after self-cal, rms=0.074158Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.24 mas, bmaj=8.712 mas, bpa=-6.15 degrees ! Estimated noise=762.907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000574245 Jy ! Component: 100 - total flux cleaned = 0.000681676 Jy ! Component: 150 - total flux cleaned = 0.000774699 Jy ! Component: 200 - total flux cleaned = 0.000813371 Jy ! Total flux subtracted in 200 components = 0.000813371 Jy ! Clean residual min=-0.002509 max=0.002017 Jy/beam ! Clean residual mean=-0.000007 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.388125 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 95 components and 0.388125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074153Jy sigma=0.000674 ! Fit after self-cal, rms=0.074146Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.46896e-05 Jy ! Component: 100 - total flux cleaned = 1.45407e-05 Jy ! Component: 150 - total flux cleaned = 1.61066e-05 Jy ! Component: 200 - total flux cleaned = 3.30817e-05 Jy ! Total flux subtracted in 200 components = 3.30817e-05 Jy ! Clean residual min=-0.002461 max=0.001974 Jy/beam ! Clean residual mean=-0.000007 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.388159 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 99 components and 0.388159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074150Jy sigma=0.000674 ! Fit after self-cal, rms=0.074144Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.874 mas, bmaj=5.237 mas, bpa=-11.95 degrees ! Estimated noise=622.861 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.874 x 5.237 at -11.95 degrees (North through East) ! Clean map min=-0.001989 max=0.20118 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=4.55 mas, bpa=-13.7 degrees ! Estimated noise=1059.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.164488 Jy ! Component: 100 - total flux cleaned = 0.242553 Jy ! Component: 150 - total flux cleaned = 0.286731 Jy ! Component: 200 - total flux cleaned = 0.314976 Jy ! Total flux subtracted in 200 components = 0.314976 Jy ! Clean residual min=-0.006426 max=0.015144 Jy/beam ! Clean residual mean=0.000032 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 0.314976 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.314976 Jy ! Inverting map and beam ! Estimated beam: bmin=3.874 mas, bmaj=5.237 mas, bpa=-11.95 degrees ! Estimated noise=622.861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273864 Jy ! Component: 100 - total flux cleaned = 0.0435858 Jy ! Component: 150 - total flux cleaned = 0.0538023 Jy ! Component: 200 - total flux cleaned = 0.0604109 Jy ! Total flux subtracted in 200 components = 0.0604109 Jy ! Clean residual min=-0.002726 max=0.005070 Jy/beam ! Clean residual mean=0.000008 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.375387 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 73 components and 0.375387 Jy ! Inverting map ! Added new window around map position (4.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00505529 Jy ! Component: 100 - total flux cleaned = 0.0083673 Jy ! Component: 150 - total flux cleaned = 0.0107449 Jy ! Component: 200 - total flux cleaned = 0.012423 Jy ! Total flux subtracted in 200 components = 0.012423 Jy ! Clean residual min=-0.002211 max=0.002238 Jy/beam ! Clean residual mean=-0.000003 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.38781 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 0.38781 Jy ! Inverting map ! Added new window around map position (120.5, 125.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109702 Jy ! Component: 100 - total flux cleaned = 0.00139235 Jy ! Component: 150 - total flux cleaned = 0.00159932 Jy ! Component: 200 - total flux cleaned = 0.00174023 Jy ! Total flux subtracted in 200 components = 0.00174023 Jy ! Clean residual min=-0.002007 max=0.001846 Jy/beam ! Clean residual mean=-0.000005 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.38955 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 100 components and 0.38955 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.24 mas, bmaj=8.712 mas, bpa=-6.15 degrees ! Estimated noise=762.907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000260031 Jy ! Component: 100 - total flux cleaned = -0.000409706 Jy ! Component: 150 - total flux cleaned = -0.000482909 Jy ! Component: 200 - total flux cleaned = -0.000504355 Jy ! Total flux subtracted in 200 components = -0.000504355 Jy ! Clean residual min=-0.002182 max=0.001793 Jy/beam ! Clean residual mean=-0.000008 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.389045 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.94947e-05 Jy ! Component: 100 - total flux cleaned = -1.94186e-05 Jy ! Component: 150 - total flux cleaned = -3.47659e-05 Jy ! Component: 200 - total flux cleaned = -3.46022e-05 Jy ! Total flux subtracted in 200 components = -3.46022e-05 Jy ! Clean residual min=-0.002203 max=0.001775 Jy/beam ! Clean residual mean=-0.000008 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.389011 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 122 components and 0.389011 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.874 mas, bmaj=5.237 mas, bpa=-11.95 degrees ! Estimated noise=622.861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196144 Jy ! Component: 100 - total flux cleaned = 0.000276959 Jy ! Component: 150 - total flux cleaned = 0.000277016 Jy ! Component: 200 - total flux cleaned = 0.00034726 Jy ! Total flux subtracted in 200 components = 0.00034726 Jy ! Clean residual min=-0.001913 max=0.001816 Jy/beam ! Clean residual mean=-0.000004 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.389358 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 131 components and 0.389358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074008Jy sigma=0.000673 ! Fit after self-cal, rms=0.073968Jy sigma=0.000673 wmodel J1326+5712_S_2017_02_24_pus_map.mod ! Writing 131 model components to file: J1326+5712_S_2017_02_24_pus_map.mod wobs J1326+5712_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1326+5712_S_2017_02_24_pus_uvs.fits wwins J1326+5712_S_2017_02_24_pus_map.win ! wwins: Wrote 4 windows to J1326+5712_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000344172 Jy ! Component: 100 - total flux cleaned = -0.000665986 Jy ! Component: 150 - total flux cleaned = -0.000818831 Jy ! Component: 200 - total flux cleaned = -0.00084796 Jy ! Component: 250 - total flux cleaned = -0.000934834 Jy ! Component: 300 - total flux cleaned = -0.000991462 Jy ! Component: 350 - total flux cleaned = -0.000964882 Jy ! Component: 400 - total flux cleaned = -0.00107229 Jy ! Component: 450 - total flux cleaned = -0.00109825 Jy ! Component: 500 - total flux cleaned = -0.00112395 Jy ! Component: 550 - total flux cleaned = -0.00124942 Jy ! Component: 600 - total flux cleaned = -0.00127378 Jy ! Component: 650 - total flux cleaned = -0.00132176 Jy ! Component: 700 - total flux cleaned = -0.00132196 Jy ! Component: 750 - total flux cleaned = -0.00143851 Jy ! Component: 800 - total flux cleaned = -0.00155271 Jy ! Component: 850 - total flux cleaned = -0.00159745 Jy ! Component: 900 - total flux cleaned = -0.0017086 Jy ! Component: 950 - total flux cleaned = -0.00181727 Jy ! Component: 1000 - total flux cleaned = -0.00190301 Jy ! Component: 1050 - total flux cleaned = -0.00196606 Jy ! Component: 1100 - total flux cleaned = -0.00204914 Jy ! Component: 1150 - total flux cleaned = -0.00209017 Jy ! Component: 1200 - total flux cleaned = -0.00219114 Jy ! Component: 1250 - total flux cleaned = -0.00223098 Jy ! Component: 1300 - total flux cleaned = -0.00234932 Jy ! Component: 1350 - total flux cleaned = -0.00240762 Jy ! Component: 1400 - total flux cleaned = -0.00250375 Jy ! Component: 1450 - total flux cleaned = -0.00261758 Jy ! Component: 1500 - total flux cleaned = -0.00269263 Jy ! Component: 1550 - total flux cleaned = -0.00280434 Jy ! Component: 1600 - total flux cleaned = -0.00291462 Jy ! Component: 1650 - total flux cleaned = -0.00305999 Jy ! Component: 1700 - total flux cleaned = -0.00316776 Jy ! Component: 1750 - total flux cleaned = -0.00323906 Jy ! Component: 1800 - total flux cleaned = -0.00334473 Jy ! Component: 1850 - total flux cleaned = -0.00343158 Jy ! Component: 1900 - total flux cleaned = -0.00355221 Jy ! Component: 1950 - total flux cleaned = -0.0036374 Jy ! Component: 2000 - total flux cleaned = -0.00372164 Jy ! Component: 2050 - total flux cleaned = -0.00375472 Jy ! Component: 2100 - total flux cleaned = -0.00388702 Jy ! Component: 2150 - total flux cleaned = -0.00393632 Jy ! Component: 2200 - total flux cleaned = -0.00404988 Jy ! Component: 2250 - total flux cleaned = -0.00411434 Jy ! Component: 2300 - total flux cleaned = -0.0041143 Jy ! Component: 2350 - total flux cleaned = -0.00427266 Jy ! Component: 2400 - total flux cleaned = -0.00425706 Jy ! Component: 2450 - total flux cleaned = -0.00431929 Jy ! Component: 2500 - total flux cleaned = -0.00439624 Jy ! Component: 2550 - total flux cleaned = -0.00442692 Jy ! Component: 2600 - total flux cleaned = -0.00450258 Jy ! Component: 2650 - total flux cleaned = -0.00456257 Jy ! Component: 2700 - total flux cleaned = -0.00460705 Jy ! Component: 2750 - total flux cleaned = -0.00465156 Jy ! Component: 2800 - total flux cleaned = -0.00471029 Jy ! Component: 2850 - total flux cleaned = -0.00479716 Jy ! Component: 2900 - total flux cleaned = -0.00478304 Jy ! Component: 2950 - total flux cleaned = -0.00492598 Jy ! Component: 3000 - total flux cleaned = -0.00495418 Jy ! Component: 3050 - total flux cleaned = -0.00506659 Jy ! Component: 3100 - total flux cleaned = -0.0050526 Jy ! Component: 3150 - total flux cleaned = -0.00510802 Jy ! Component: 3200 - total flux cleaned = -0.00528633 Jy ! Component: 3250 - total flux cleaned = -0.00528631 Jy ! Component: 3300 - total flux cleaned = -0.00529982 Jy ! Component: 3350 - total flux cleaned = -0.00539391 Jy ! Component: 3400 - total flux cleaned = -0.00547377 Jy ! Component: 3450 - total flux cleaned = -0.00550025 Jy ! Component: 3500 - total flux cleaned = -0.00556586 Jy ! Component: 3550 - total flux cleaned = -0.00561804 Jy ! Component: 3600 - total flux cleaned = -0.00564395 Jy ! Component: 3650 - total flux cleaned = -0.00572104 Jy ! Component: 3700 - total flux cleaned = -0.00579765 Jy ! Component: 3750 - total flux cleaned = -0.00583566 Jy ! Component: 3800 - total flux cleaned = -0.00592368 Jy ! Component: 3850 - total flux cleaned = -0.00597351 Jy ! Component: 3900 - total flux cleaned = -0.00597348 Jy ! Component: 3950 - total flux cleaned = -0.00607203 Jy ! Component: 4000 - total flux cleaned = -0.00609631 Jy ! Component: 4050 - total flux cleaned = -0.00613273 Jy ! Total flux subtracted in 4096 components = -0.00618113 Jy ! Clean residual min=-0.000685 max=0.000673 Jy/beam ! Clean residual mean=-0.000001 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.383177 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 421 components and 0.383177 Jy ![Exited script file: muppet] wmap "J1326+5712_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.874 x 5.237 at -11.95 degrees (North through East) ! Clean map min=-0.0013414 max=0.20077 Jy/beam ! Writing clean map to FITS file: J1326+5712_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.200766 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213825 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.319514 0.319514 0.639028 1.27806 2.55611 5.11222 10.2244 20.4489 40.8978 81.7956 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.2 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.874 x 5.237 at -11.95 degrees (North through East) ! Clean map min=-0.0013414 max=0.20077 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1326+5712_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:28:00 2019