! Started logfile: J1326+0326_S_2017_10_09_pus_uvs.log on Sun May 12 13:13:40 2019 obs J1326+0326_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1326+0326_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.739372 visibilities/baseline/integration-bin. ! Found source: J1326+0326 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1326+0326_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 231 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 539 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.937360Jy sigma=0.007952 ! Fit after self-cal, rms=0.922635Jy sigma=0.007837 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=13.07 mas, bpa=-17.29 degrees ! Estimated noise=1276.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0597757 Jy ! Component: 100 - total flux cleaned = 0.0737304 Jy ! Total flux subtracted in 100 components = 0.0737304 Jy ! Clean residual min=-0.004845 max=0.005409 Jy/beam ! Clean residual mean=0.000016 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.0737304 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0737304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087167Jy sigma=0.000659 ! Fit after self-cal, rms=0.087145Jy sigma=0.000659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=14.71 mas, bpa=-17.32 degrees ! Estimated noise=904.421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00777416 Jy ! Component: 100 - total flux cleaned = 0.0114586 Jy ! Component: 150 - total flux cleaned = 0.0136501 Jy ! Component: 200 - total flux cleaned = 0.0149957 Jy ! Total flux subtracted in 200 components = 0.0149957 Jy ! Clean residual min=-0.003363 max=0.003070 Jy/beam ! Clean residual mean=0.000025 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.0887261 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 32 components and 0.0887261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086325Jy sigma=0.000654 ! Fit after self-cal, rms=0.086275Jy sigma=0.000654 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 1.00 KP 1.14 ! LA 1.07 MK 1.01 NL 0.94 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.05 HN 1.08 KP 0.99 ! LA 0.98 MK 1.01 NL 1.00 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.06 HN 1.10 KP 0.95 ! LA 0.76 MK 1.14 NL 1.21 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.86 KP 1.00* ! LA 0.70 MK 0.87 NL 1.00* OV 1.00* ! PT 1.07 ! ! ! Fit before self-cal, rms=0.086275Jy sigma=0.000654 ! Fit after self-cal, rms=0.081668Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=14.43 mas, bpa=-17.29 degrees ! Estimated noise=902.608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000752491 Jy ! Component: 100 - total flux cleaned = 0.00103586 Jy ! Component: 150 - total flux cleaned = 0.00114151 Jy ! Component: 200 - total flux cleaned = 0.00121491 Jy ! Total flux subtracted in 200 components = 0.00121491 Jy ! Clean residual min=-0.002676 max=0.002281 Jy/beam ! Clean residual mean=0.000007 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.089941 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 48 components and 0.089941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081654Jy sigma=0.000648 ! Fit after self-cal, rms=0.081552Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081552Jy sigma=0.000647 ! Fit after self-cal, rms=0.081115Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=14.39 mas, bpa=-17.29 degrees ! Estimated noise=900.398 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00033375 Jy ! Component: 100 - total flux cleaned = 0.00045185 Jy ! Component: 150 - total flux cleaned = 0.000535706 Jy ! Component: 200 - total flux cleaned = 0.00058012 Jy ! Total flux subtracted in 200 components = 0.00058012 Jy ! Clean residual min=-0.002297 max=0.002031 Jy/beam ! Clean residual mean=0.000001 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.0905211 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.0905211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081107Jy sigma=0.000646 ! Fit after self-cal, rms=0.081110Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.43881e-05 Jy ! Component: 100 - total flux cleaned = -4.39705e-05 Jy ! Component: 150 - total flux cleaned = -1.91017e-05 Jy ! Component: 200 - total flux cleaned = -8.0725e-06 Jy ! Total flux subtracted in 200 components = -8.0725e-06 Jy ! Clean residual min=-0.002244 max=0.002015 Jy/beam ! Clean residual mean=0.000001 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0905131 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.0905131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081106Jy sigma=0.000646 ! Fit after self-cal, rms=0.081104Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081104Jy sigma=0.000646 ! Fit after self-cal, rms=0.081198Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.33 mas, bmaj=14.36 mas, bpa=-17.29 degrees ! Estimated noise=901.102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019673 Jy ! Component: 100 - total flux cleaned = 0.000323759 Jy ! Component: 150 - total flux cleaned = 0.000345443 Jy ! Component: 200 - total flux cleaned = 0.000355983 Jy ! Total flux subtracted in 200 components = 0.000355983 Jy ! Clean residual min=-0.002222 max=0.001940 Jy/beam ! Clean residual mean=0.000001 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.090869 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 75 components and 0.090869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081194Jy sigma=0.000646 ! Fit after self-cal, rms=0.081185Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.00538e-05 Jy ! Component: 100 - total flux cleaned = 2.0701e-05 Jy ! Component: 150 - total flux cleaned = 3.12051e-05 Jy ! Component: 200 - total flux cleaned = 5.05684e-05 Jy ! Total flux subtracted in 200 components = 5.05684e-05 Jy ! Clean residual min=-0.002228 max=0.001931 Jy/beam ! Clean residual mean=0.000001 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0909196 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.0909196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081182Jy sigma=0.000645 ! Fit after self-cal, rms=0.081181Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081181Jy sigma=0.000645 ! Fit after self-cal, rms=0.081289Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.212 mas, bmaj=14.37 mas, bpa=-16.11 degrees ! Estimated noise=1102.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000514171 Jy ! Component: 100 - total flux cleaned = 0.000566856 Jy ! Component: 150 - total flux cleaned = 0.000590061 Jy ! Component: 200 - total flux cleaned = 0.000611413 Jy ! Total flux subtracted in 200 components = 0.000611413 Jy ! Clean residual min=-0.002713 max=0.002267 Jy/beam ! Clean residual mean=-0.000000 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.091531 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 88 components and 0.091531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081287Jy sigma=0.000645 ! Fit after self-cal, rms=0.081287Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.14818e-05 Jy ! Component: 100 - total flux cleaned = 7.14596e-05 Jy ! Component: 150 - total flux cleaned = 8.12524e-05 Jy ! Component: 200 - total flux cleaned = 9.87709e-05 Jy ! Total flux subtracted in 200 components = 9.87709e-05 Jy ! Clean residual min=-0.002686 max=0.002263 Jy/beam ! Clean residual mean=-0.000000 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0916298 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 96 components and 0.0916298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081286Jy sigma=0.000645 ! Fit after self-cal, rms=0.081285Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=14.35 mas, bpa=-17.29 degrees ! Estimated noise=902.221 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.329 x 14.35 at -17.29 degrees (North through East) ! Clean map min=-0.0021465 max=0.078305 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=12.8 mas, bpa=-17.21 degrees ! Estimated noise=1280.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0595572 Jy ! Component: 100 - total flux cleaned = 0.0738096 Jy ! Component: 150 - total flux cleaned = 0.079827 Jy ! Component: 200 - total flux cleaned = 0.0827157 Jy ! Total flux subtracted in 200 components = 0.0827157 Jy ! Clean residual min=-0.002658 max=0.002903 Jy/beam ! Clean residual mean=0.000007 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.0827157 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0827157 Jy ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=14.35 mas, bpa=-17.29 degrees ! Estimated noise=902.221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297031 Jy ! Component: 100 - total flux cleaned = 0.00490565 Jy ! Component: 150 - total flux cleaned = 0.00625823 Jy ! Component: 200 - total flux cleaned = 0.00720903 Jy ! Total flux subtracted in 200 components = 0.00720903 Jy ! Clean residual min=-0.002361 max=0.002031 Jy/beam ! Clean residual mean=0.000004 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0899247 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 39 components and 0.0899247 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.212 mas, bmaj=14.37 mas, bpa=-16.11 degrees ! Estimated noise=1102.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104136 Jy ! Component: 100 - total flux cleaned = 0.00155985 Jy ! Component: 150 - total flux cleaned = 0.00169737 Jy ! Component: 200 - total flux cleaned = 0.0017547 Jy ! Total flux subtracted in 200 components = 0.0017547 Jy ! Clean residual min=-0.002672 max=0.002275 Jy/beam ! Clean residual mean=-0.000000 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0916794 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.10583e-05 Jy ! Component: 100 - total flux cleaned = 4.11721e-05 Jy ! Component: 150 - total flux cleaned = 5.04677e-05 Jy ! Component: 200 - total flux cleaned = 6.89335e-05 Jy ! Total flux subtracted in 200 components = 6.89335e-05 Jy ! Clean residual min=-0.002661 max=0.002251 Jy/beam ! Clean residual mean=-0.000000 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.0917483 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 57 components and 0.0917483 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=14.35 mas, bpa=-17.29 degrees ! Estimated noise=902.221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248896 Jy ! Component: 100 - total flux cleaned = -0.000212296 Jy ! Component: 150 - total flux cleaned = -0.000179603 Jy ! Component: 200 - total flux cleaned = -0.000194683 Jy ! Total flux subtracted in 200 components = -0.000194683 Jy ! Clean residual min=-0.002227 max=0.001994 Jy/beam ! Clean residual mean=0.000000 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0915536 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.0915536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081289Jy sigma=0.000645 ! Fit after self-cal, rms=0.081289Jy sigma=0.000645 wmodel J1326+0326_S_2017_10_09_pus_map.mod ! Writing 70 model components to file: J1326+0326_S_2017_10_09_pus_map.mod wobs J1326+0326_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1326+0326_S_2017_10_09_pus_uvs.fits wwins J1326+0326_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1326+0326_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000558197 Jy ! Component: 100 - total flux cleaned = -0.000695087 Jy ! Component: 150 - total flux cleaned = -0.000823912 Jy ! Component: 200 - total flux cleaned = -0.000794077 Jy ! Component: 250 - total flux cleaned = -0.000735559 Jy ! Component: 300 - total flux cleaned = -0.000762688 Jy ! Component: 350 - total flux cleaned = -0.000763247 Jy ! Component: 400 - total flux cleaned = -0.000814257 Jy ! Component: 450 - total flux cleaned = -0.000814519 Jy ! Component: 500 - total flux cleaned = -0.000861723 Jy ! Component: 550 - total flux cleaned = -0.000793684 Jy ! Component: 600 - total flux cleaned = -0.000750279 Jy ! Component: 650 - total flux cleaned = -0.000772474 Jy ! Component: 700 - total flux cleaned = -0.000730813 Jy ! Component: 750 - total flux cleaned = -0.000771918 Jy ! Component: 800 - total flux cleaned = -0.00077198 Jy ! Component: 850 - total flux cleaned = -0.000831228 Jy ! Component: 900 - total flux cleaned = -0.000946387 Jy ! Component: 950 - total flux cleaned = -0.00107745 Jy ! Component: 1000 - total flux cleaned = -0.00118747 Jy ! Component: 1050 - total flux cleaned = -0.00127756 Jy ! Component: 1100 - total flux cleaned = -0.00140107 Jy ! Component: 1150 - total flux cleaned = -0.00150454 Jy ! Component: 1200 - total flux cleaned = -0.001573 Jy ! Component: 1250 - total flux cleaned = -0.00173973 Jy ! Component: 1300 - total flux cleaned = -0.00180477 Jy ! Component: 1350 - total flux cleaned = -0.00185284 Jy ! Component: 1400 - total flux cleaned = -0.00193215 Jy ! Component: 1450 - total flux cleaned = -0.00196327 Jy ! Component: 1500 - total flux cleaned = -0.00205554 Jy ! Component: 1550 - total flux cleaned = -0.00210081 Jy ! Component: 1600 - total flux cleaned = -0.00219005 Jy ! Component: 1650 - total flux cleaned = -0.00227773 Jy ! Component: 1700 - total flux cleaned = -0.00227768 Jy ! Component: 1750 - total flux cleaned = -0.00233449 Jy ! Component: 1800 - total flux cleaned = -0.00237636 Jy ! Component: 1850 - total flux cleaned = -0.00241757 Jy ! Component: 1900 - total flux cleaned = -0.00244483 Jy ! Component: 1950 - total flux cleaned = -0.0024983 Jy ! Component: 2000 - total flux cleaned = -0.00257726 Jy ! Component: 2050 - total flux cleaned = -0.00259011 Jy ! Component: 2100 - total flux cleaned = -0.00261589 Jy ! Component: 2150 - total flux cleaned = -0.00266662 Jy ! Component: 2200 - total flux cleaned = -0.00271647 Jy ! Component: 2250 - total flux cleaned = -0.00274099 Jy ! Component: 2300 - total flux cleaned = -0.00275323 Jy ! Component: 2350 - total flux cleaned = -0.00281366 Jy ! Component: 2400 - total flux cleaned = -0.00281356 Jy ! Component: 2450 - total flux cleaned = -0.00283718 Jy ! Component: 2500 - total flux cleaned = -0.00287251 Jy ! Component: 2550 - total flux cleaned = -0.00290736 Jy ! Component: 2600 - total flux cleaned = -0.00299938 Jy ! Component: 2650 - total flux cleaned = -0.00305641 Jy ! Component: 2700 - total flux cleaned = -0.00312395 Jy ! Component: 2750 - total flux cleaned = -0.00319099 Jy ! Component: 2800 - total flux cleaned = -0.00325736 Jy ! Component: 2850 - total flux cleaned = -0.0033013 Jy ! Component: 2900 - total flux cleaned = -0.00333397 Jy ! Component: 2950 - total flux cleaned = -0.0033881 Jy ! Component: 3000 - total flux cleaned = -0.00348444 Jy ! Component: 3050 - total flux cleaned = -0.00353755 Jy ! Component: 3100 - total flux cleaned = -0.00360085 Jy ! Component: 3150 - total flux cleaned = -0.00366374 Jy ! Component: 3200 - total flux cleaned = -0.00372605 Jy ! Component: 3250 - total flux cleaned = -0.00379834 Jy ! Component: 3300 - total flux cleaned = -0.00387 Jy ! Component: 3350 - total flux cleaned = -0.00393092 Jy ! Component: 3400 - total flux cleaned = -0.0039915 Jy ! Component: 3450 - total flux cleaned = -0.00407169 Jy ! Component: 3500 - total flux cleaned = -0.0041313 Jy ! Component: 3550 - total flux cleaned = -0.00421017 Jy ! Component: 3600 - total flux cleaned = -0.00425918 Jy ! Component: 3650 - total flux cleaned = -0.00431768 Jy ! Component: 3700 - total flux cleaned = -0.00438547 Jy ! Component: 3750 - total flux cleaned = -0.00443362 Jy ! Component: 3800 - total flux cleaned = -0.00451002 Jy ! Component: 3850 - total flux cleaned = -0.00456694 Jy ! Component: 3900 - total flux cleaned = -0.00460468 Jy ! Component: 3950 - total flux cleaned = -0.0046704 Jy ! Component: 4000 - total flux cleaned = -0.0047357 Jy ! Component: 4050 - total flux cleaned = -0.00478202 Jy ! Total flux subtracted in 4096 components = -0.00482815 Jy ! Clean residual min=-0.000582 max=0.000489 Jy/beam ! Clean residual mean=-0.000000 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.0867255 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 352 components and 0.0867255 Jy ![Exited script file: muppet] wmap "J1326+0326_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.329 x 14.35 at -17.29 degrees (North through East) ! Clean map min=-0.001356 max=0.077888 Jy/beam ! Writing clean map to FITS file: J1326+0326_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0778883 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000171629 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.661057 0.661057 1.32211 2.64423 5.28846 10.5769 21.1538 42.3077 84.6153 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.329 x 14.35 at -17.29 degrees (North through East) ! Clean map min=-0.001356 max=0.077888 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1326+0326_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:13:45 2019