! Started logfile: J1325-4301_S_2017_06_15_pus_uvs.log on Tue May  7 15:19:30 2019
obs J1325-4301_S_2017_06_15_pus_uva.fits
! Reading UV FITS file: J1325-4301_S_2017_06_15_pus_uva.fits
! AN table 1: 144 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.463117 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1325-4301
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 603 lines of history.
! 
! Reading 12004 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1325-4301_S_2017_06_15_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 488 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 516 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 702 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1149 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.283991Jy  sigma=0.006363
! Fit after  self-cal, rms=1.181994Jy  sigma=0.005756
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.463 mas, bmaj=8.277 mas, bpa=-10.29 degrees
! Estimated noise=3002.05 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.543291 Jy
! Component: 100  -  total flux cleaned = 0.876298 Jy
! Total flux subtracted in 100 components = 0.876298 Jy
! Clean residual min=-0.134423 max=0.288207 Jy/beam
! Clean residual mean=0.000534 rms=0.058998 Jy/beam
! Combined flux in latest and established models = 0.876298 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.876298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.063091Jy  sigma=0.005055
! Fit after  self-cal, rms=1.062301Jy  sigma=0.005051
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.075 mas, bmaj=9.568 mas, bpa=-9.498 degrees
! Estimated noise=1539.75 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.385194 Jy
! Component: 100  -  total flux cleaned = 0.589308 Jy
! Component: 150  -  total flux cleaned = 0.697745 Jy
! Component: 200  -  total flux cleaned = 0.740785 Jy
! Total flux subtracted in 200 components = 0.740785 Jy
! Clean residual min=-0.224092 max=0.375199 Jy/beam
! Clean residual mean=-0.001342 rms=0.087713 Jy/beam
! Combined flux in latest and established models = 1.61708 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 45 components and 1.61708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.886425Jy  sigma=0.004429
! Fit after  self-cal, rms=0.884334Jy  sigma=0.004417
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.74     HN        1.00*    KP        1.19     
!   LA        0.61     MK        2.69     NL       15.09     OV        2.24     
!   PT        0.76     SC        1.62     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.71     HN        1.00*    KP        1.19     
!   LA        0.57     MK        2.74     NL       16.84     OV        2.34     
!   PT        0.75     SC        1.71     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.80     HN        1.00*    KP        1.37     
!   LA        0.77     MK        2.11     NL       14.71     OV        2.04     
!   PT        0.71     SC        1.64     
! 
! 
! Correcting IF 4.
!  A total of 291 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.884334Jy  sigma=0.004417
! Fit after  self-cal, rms=1.638566Jy  sigma=0.002344
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.039 mas, bmaj=12.11 mas, bpa=-4.463 degrees
! Estimated noise=2359.79 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00930394 Jy
! Component: 100  -  total flux cleaned = 0.0133098 Jy
! Component: 150  -  total flux cleaned = 0.0165602 Jy
! Component: 200  -  total flux cleaned = 0.0179993 Jy
! Total flux subtracted in 200 components = 0.0179993 Jy
! Clean residual min=-0.192242 max=0.207691 Jy/beam
! Clean residual mean=0.004116 rms=0.061255 Jy/beam
! Combined flux in latest and established models = 1.63508 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 54 components and 1.63508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.629080Jy  sigma=0.002321
! Fit after  self-cal, rms=1.656115Jy  sigma=0.002286
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.656115Jy  sigma=0.002286
! Fit after  self-cal, rms=1.982505Jy  sigma=0.001857
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.67 mas, bmaj=13.99 mas, bpa=-4.021 degrees
! Estimated noise=2206.8 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0250944 Jy
! Component: 100  -  total flux cleaned = 0.0251108 Jy
! Component: 150  -  total flux cleaned = 0.02513 Jy
! Component: 200  -  total flux cleaned = 0.0250992 Jy
! Total flux subtracted in 200 components = 0.0250992 Jy
! Clean residual min=-0.133210 max=0.184163 Jy/beam
! Clean residual mean=0.001846 rms=0.044954 Jy/beam
! Combined flux in latest and established models = 1.66018 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 60 components and 1.66018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.979249Jy  sigma=0.001859
! Fit after  self-cal, rms=1.983303Jy  sigma=0.001857
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.39126e-05 Jy
! Component: 100  -  total flux cleaned = 4.02205e-05 Jy
! Component: 150  -  total flux cleaned = 9.23147e-06 Jy
! Component: 200  -  total flux cleaned = 9.21229e-06 Jy
! Total flux subtracted in 200 components = 9.21229e-06 Jy
! Clean residual min=-0.133114 max=0.182466 Jy/beam
! Clean residual mean=0.001848 rms=0.044912 Jy/beam
! Combined flux in latest and established models = 1.66019 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 64 components and 1.66019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.981063Jy  sigma=0.001857
! Fit after  self-cal, rms=1.981613Jy  sigma=0.001856
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.981613Jy  sigma=0.001856
! Fit after  self-cal, rms=2.125764Jy  sigma=0.001852
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.722 mas, bmaj=14.56 mas, bpa=-3.794 degrees
! Estimated noise=2266.21 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.023586 Jy
! Component: 100  -  total flux cleaned = 0.0242879 Jy
! Component: 150  -  total flux cleaned = 0.0243455 Jy
! Component: 200  -  total flux cleaned = 0.0243354 Jy
! Total flux subtracted in 200 components = 0.0243354 Jy
! Clean residual min=-0.138102 max=0.187157 Jy/beam
! Clean residual mean=0.001874 rms=0.046028 Jy/beam
! Combined flux in latest and established models = 1.68453 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 64 components and 1.68453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.122147Jy  sigma=0.001855
! Fit after  self-cal, rms=2.123177Jy  sigma=0.001853
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000880957 Jy
! Component: 100  -  total flux cleaned = 0.000255443 Jy
! Component: 150  -  total flux cleaned = 0.000238516 Jy
! Component: 200  -  total flux cleaned = 0.00068733 Jy
! Total flux subtracted in 200 components = 0.00068733 Jy
! Clean residual min=-0.138072 max=0.185643 Jy/beam
! Clean residual mean=0.001877 rms=0.045989 Jy/beam
! Combined flux in latest and established models = 1.68521 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 68 components and 1.68521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.120439Jy  sigma=0.001854
! Fit after  self-cal, rms=2.120857Jy  sigma=0.001853
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.120857Jy  sigma=0.001853
! Fit after  self-cal, rms=2.254140Jy  sigma=0.001849
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.03 mas, bmaj=43.58 mas, bpa=1.991 degrees
! Estimated noise=2286.63 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0274734 Jy
! Component: 100  -  total flux cleaned = 0.031619 Jy
! Component: 150  -  total flux cleaned = 0.0318576 Jy
! Component: 200  -  total flux cleaned = 0.0318695 Jy
! Total flux subtracted in 200 components = 0.0318695 Jy
! Clean residual min=-0.182135 max=0.229791 Jy/beam
! Clean residual mean=0.002891 rms=0.066348 Jy/beam
! Combined flux in latest and established models = 1.71708 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 72 components and 1.71708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.255150Jy  sigma=0.001854
! Fit after  self-cal, rms=2.255094Jy  sigma=0.001853
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.26658e-05 Jy
! Component: 100  -  total flux cleaned = -2.43808e-05 Jy
! Component: 150  -  total flux cleaned = -3.33996e-05 Jy
! Component: 200  -  total flux cleaned = -2.83092e-05 Jy
! Total flux subtracted in 200 components = -2.83092e-05 Jy
! Clean residual min=-0.182076 max=0.229014 Jy/beam
! Clean residual mean=0.002889 rms=0.066346 Jy/beam
! Combined flux in latest and established models = 1.71705 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 73 components and 1.71705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.256469Jy  sigma=0.001854
! Fit after  self-cal, rms=2.255892Jy  sigma=0.001854
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.771 mas, bmaj=14.99 mas, bpa=-3.665 degrees
! Estimated noise=2326.02 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.771 x 14.99 at -3.665 degrees (North through East)
! Clean map  min=-0.14097  max=0.71676 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.255892Jy  sigma=0.001854
! Fit after  self-cal, rms=6.564144Jy  sigma=0.001783
! Inverting map and beam 
! Estimated beam: bmin=3.941 mas, bmaj=15.46 mas, bpa=-2.929 degrees
! Estimated noise=2459.99 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0221647 Jy
! Component: 100  -  total flux cleaned = 0.0222095 Jy
! Component: 150  -  total flux cleaned = 0.0221789 Jy
! Component: 200  -  total flux cleaned = 0.0221683 Jy
! Total flux subtracted in 200 components = 0.0221683 Jy
! Clean residual min=-0.146337 max=0.190542 Jy/beam
! Clean residual mean=0.001832 rms=0.048084 Jy/beam
! Combined flux in latest and established models = 1.73922 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 73 components and 1.73922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=6.562933Jy  sigma=0.001785
! Fit after  self-cal, rms=6.563549Jy  sigma=0.001784
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000146923 Jy
! Component: 100  -  total flux cleaned = 0.000208968 Jy
! Component: 150  -  total flux cleaned = 0.000738146 Jy
! Component: 200  -  total flux cleaned = 0.000767441 Jy
! Total flux subtracted in 200 components = 0.000767441 Jy
! Clean residual min=-0.145870 max=0.188960 Jy/beam
! Clean residual mean=0.001835 rms=0.048038 Jy/beam
! Combined flux in latest and established models = 1.73999 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 74 components and 1.73999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=6.562174Jy  sigma=0.001784
! Fit after  self-cal, rms=6.562629Jy  sigma=0.001783
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=6.562629Jy  sigma=0.001783
! Fit after  self-cal, rms=6.932960Jy  sigma=0.001780
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.921 mas, bmaj=12.99 mas, bpa=-3.288 degrees
! Estimated noise=6440.1 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.91154 Jy
! Component: 100  -  total flux cleaned = 1.32598 Jy
! Component: 150  -  total flux cleaned = 1.53956 Jy
! Component: 200  -  total flux cleaned = 1.65137 Jy
! Total flux subtracted in 200 components = 1.65137 Jy
! Clean residual min=-0.141434 max=0.160487 Jy/beam
! Clean residual mean=0.001134 rms=0.040609 Jy/beam
! Combined flux in latest and established models = 1.65137 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 1.65137 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.999 mas, bmaj=15.97 mas, bpa=-2.712 degrees
! Estimated noise=2520.12 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0733882 Jy
! Component: 100  -  total flux cleaned = 0.0940192 Jy
! Component: 150  -  total flux cleaned = 0.0958469 Jy
! Component: 200  -  total flux cleaned = 0.0968785 Jy
! Total flux subtracted in 200 components = 0.0968785 Jy
! Clean residual min=-0.159930 max=0.189524 Jy/beam
! Clean residual mean=0.001847 rms=0.049792 Jy/beam
! Combined flux in latest and established models = 1.74825 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 44 components and 1.74825 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.48 mas, bmaj=45.17 mas, bpa=2.636 degrees
! Estimated noise=2361.69 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154265 Jy
! Component: 100  -  total flux cleaned = 0.0155501 Jy
! Component: 150  -  total flux cleaned = 0.0156031 Jy
! Component: 200  -  total flux cleaned = 0.0156145 Jy
! Total flux subtracted in 200 components = 0.0156145 Jy
! Clean residual min=-0.186643 max=0.223745 Jy/beam
! Clean residual mean=0.002666 rms=0.066399 Jy/beam
! Combined flux in latest and established models = 1.76386 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000118279 Jy
! Component: 100  -  total flux cleaned = -0.000261595 Jy
! Component: 150  -  total flux cleaned = -0.000387843 Jy
! Component: 200  -  total flux cleaned = -0.000494124 Jy
! Total flux subtracted in 200 components = -0.000494124 Jy
! Clean residual min=-0.186069 max=0.224261 Jy/beam
! Clean residual mean=0.002668 rms=0.066284 Jy/beam
! Combined flux in latest and established models = 1.76337 Jy
! Adding 8 model components to the UV plane model.
! The established model now contains 50 components and 1.76337 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.999 mas, bmaj=15.97 mas, bpa=-2.712 degrees
! Estimated noise=2520.12 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0142255 Jy
! Component: 100  -  total flux cleaned = -0.0142385 Jy
! Component: 150  -  total flux cleaned = -0.0129359 Jy
! Component: 200  -  total flux cleaned = -0.0124815 Jy
! Total flux subtracted in 200 components = -0.0124815 Jy
! Clean residual min=-0.158930 max=0.192228 Jy/beam
! Clean residual mean=0.001852 rms=0.049551 Jy/beam
! Combined flux in latest and established models = 1.75089 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 56 components and 1.75089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=6.928595Jy  sigma=0.001799
! Fit after  self-cal, rms=6.924524Jy  sigma=0.001797
wmodel J1325-4301_S_2017_06_15_pus_map.mod
! Writing 56 model components to file: J1325-4301_S_2017_06_15_pus_map.mod
wobs J1325-4301_S_2017_06_15_pus_uvs.fits
! Writing UV FITS file: J1325-4301_S_2017_06_15_pus_uvs.fits
wwins J1325-4301_S_2017_06_15_pus_map.win
! wwins: Wrote 1 windows to J1325-4301_S_2017_06_15_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0385242 Jy
! Component: 100  -  total flux cleaned = 0.0358886 Jy
! Component: 150  -  total flux cleaned = 0.0381732 Jy
! Component: 200  -  total flux cleaned = 0.0469296 Jy
! Component: 250  -  total flux cleaned = 0.0572041 Jy
! Component: 300  -  total flux cleaned = 0.0670418 Jy
! Component: 350  -  total flux cleaned = 0.076414 Jy
! Component: 400  -  total flux cleaned = 0.0835904 Jy
! Component: 450  -  total flux cleaned = 0.0921738 Jy
! Component: 500  -  total flux cleaned = 0.0954219 Jy
! Component: 550  -  total flux cleaned = 0.0970265 Jy
! Component: 600  -  total flux cleaned = 0.101576 Jy
! Component: 650  -  total flux cleaned = 0.104478 Jy
! Component: 700  -  total flux cleaned = 0.107303 Jy
! Component: 750  -  total flux cleaned = 0.111339 Jy
! Component: 800  -  total flux cleaned = 0.112666 Jy
! Component: 850  -  total flux cleaned = 0.117779 Jy
! Component: 900  -  total flux cleaned = 0.117771 Jy
! Component: 950  -  total flux cleaned = 0.118984 Jy
! Component: 1000  -  total flux cleaned = 0.117782 Jy
! Component: 1050  -  total flux cleaned = 0.11431 Jy
! Component: 1100  -  total flux cleaned = 0.116572 Jy
! Component: 1150  -  total flux cleaned = 0.116551 Jy
! Component: 1200  -  total flux cleaned = 0.11546 Jy
! Component: 1250  -  total flux cleaned = 0.115461 Jy
! Component: 1300  -  total flux cleaned = 0.116537 Jy
! Component: 1350  -  total flux cleaned = 0.116539 Jy
! Component: 1400  -  total flux cleaned = 0.115499 Jy
! Component: 1450  -  total flux cleaned = 0.116524 Jy
! Component: 1500  -  total flux cleaned = 0.116527 Jy
! Component: 1550  -  total flux cleaned = 0.115519 Jy
! Component: 1600  -  total flux cleaned = 0.115524 Jy
! Component: 1650  -  total flux cleaned = 0.115533 Jy
! Component: 1700  -  total flux cleaned = 0.116522 Jy
! Component: 1750  -  total flux cleaned = 0.115551 Jy
! Component: 1800  -  total flux cleaned = 0.116516 Jy
! Component: 1850  -  total flux cleaned = 0.11459 Jy
! Component: 1900  -  total flux cleaned = 0.114595 Jy
! Component: 1950  -  total flux cleaned = 0.113646 Jy
! Component: 2000  -  total flux cleaned = 0.111751 Jy
! Component: 2050  -  total flux cleaned = 0.110809 Jy
! Component: 2100  -  total flux cleaned = 0.108937 Jy
! Component: 2150  -  total flux cleaned = 0.107068 Jy
! Component: 2200  -  total flux cleaned = 0.104276 Jy
! Component: 2250  -  total flux cleaned = 0.107072 Jy
! Component: 2300  -  total flux cleaned = 0.108004 Jy
! Component: 2350  -  total flux cleaned = 0.112667 Jy
! Component: 2400  -  total flux cleaned = 0.11455 Jy
! Component: 2450  -  total flux cleaned = 0.117374 Jy
! Component: 2500  -  total flux cleaned = 0.119255 Jy
! Component: 2550  -  total flux cleaned = 0.12306 Jy
! Component: 2600  -  total flux cleaned = 0.124976 Jy
! Component: 2650  -  total flux cleaned = 0.126893 Jy
! Component: 2700  -  total flux cleaned = 0.130767 Jy
! Component: 2750  -  total flux cleaned = 0.134668 Jy
! Component: 2800  -  total flux cleaned = 0.137617 Jy
! Component: 2850  -  total flux cleaned = 0.141563 Jy
! Component: 2900  -  total flux cleaned = 0.14257 Jy
! Component: 2950  -  total flux cleaned = 0.144585 Jy
! Component: 3000  -  total flux cleaned = 0.146651 Jy
! Component: 3050  -  total flux cleaned = 0.149784 Jy
! Component: 3100  -  total flux cleaned = 0.151909 Jy
! Component: 3150  -  total flux cleaned = 0.152989 Jy
! Component: 3200  -  total flux cleaned = 0.155181 Jy
! Component: 3250  -  total flux cleaned = 0.156293 Jy
! Component: 3300  -  total flux cleaned = 0.158574 Jy
! Component: 3350  -  total flux cleaned = 0.159731 Jy
! Component: 3400  -  total flux cleaned = 0.162086 Jy
! Component: 3450  -  total flux cleaned = 0.164509 Jy
! Component: 3500  -  total flux cleaned = 0.166992 Jy
! Component: 3550  -  total flux cleaned = 0.168251 Jy
! Component: 3600  -  total flux cleaned = 0.169528 Jy
! Component: 3650  -  total flux cleaned = 0.17083 Jy
! Component: 3700  -  total flux cleaned = 0.173513 Jy
! Component: 3750  -  total flux cleaned = 0.173527 Jy
! Component: 3800  -  total flux cleaned = 0.17491 Jy
! Component: 3850  -  total flux cleaned = 0.177757 Jy
! Component: 3900  -  total flux cleaned = 0.179223 Jy
! Component: 3950  -  total flux cleaned = 0.180694 Jy
! Component: 4000  -  total flux cleaned = 0.18374 Jy
! Component: 4050  -  total flux cleaned = 0.185289 Jy
! Total flux subtracted in 4096 components = 0.186868 Jy
! Clean residual min=-0.097264 max=0.087607 Jy/beam
! Clean residual mean=0.000009 rms=0.030758 Jy/beam
! Combined flux in latest and established models = 1.93775 Jy
keep
! Adding 488 model components to the UV plane model.
! The established model now contains 544 components and 1.93775 Jy
![Exited script file: muppet]
wmap "J1325-4301_S_2017_06_15_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.999 x 15.97 at -2.712 degrees (North through East)
! Clean map  min=-0.17689  max=0.86207 Jy/beam
! Writing clean map to FITS file: J1325-4301_S_2017_06_15_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.862072 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0283659 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -9.8713 9.8713 19.7426 39.4852 78.9704
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.085 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.862 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.999 x 15.97 at -2.712 degrees (North through East)
! Clean map  min=-0.17689  max=0.86207 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J1325-4301_S_2017_06_15_pus_uvs.log closed on Tue May  7 15:19:35 2019