! Started logfile: J1324+3622_S_2017_05_27_pus_uvs.log on Fri May 3 11:08:40 2019 obs J1324+3622_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1324+3622_S_2017_05_27_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.854335 visibilities/baseline/integration-bin. ! Found source: J1324+3622 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 26604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1324+3622_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 151 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 151 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1003 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.950915Jy sigma=0.008604 ! Fit after self-cal, rms=0.937211Jy sigma=0.008504 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=6.032 mas, bpa=5.66 degrees ! Estimated noise=1086.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.051004 Jy ! Component: 100 - total flux cleaned = 0.0622843 Jy ! Total flux subtracted in 100 components = 0.0622843 Jy ! Clean residual min=-0.002552 max=0.003693 Jy/beam ! Clean residual mean=0.000001 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.0622843 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0622843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084989Jy sigma=0.000661 ! Fit after self-cal, rms=0.084950Jy sigma=0.000660 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=6.769 mas, bpa=5.288 degrees ! Estimated noise=554.928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00412812 Jy ! Component: 100 - total flux cleaned = 0.00613233 Jy ! Component: 150 - total flux cleaned = 0.00727628 Jy ! Component: 200 - total flux cleaned = 0.0077665 Jy ! Total flux subtracted in 200 components = 0.0077665 Jy ! Clean residual min=-0.001936 max=0.001761 Jy/beam ! Clean residual mean=0.000004 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0700508 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 0.0700508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084711Jy sigma=0.000659 ! Fit after self-cal, rms=0.084712Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.95 HN 1.01 KP 1.01 ! LA 1.00 MK 1.03 NL 0.92 OV 1.03 ! PT 1.04 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.01 HN 1.08 KP 0.96 ! LA 0.93 MK 1.06 NL 1.03 OV 1.03 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.08 KP 1.02 ! LA 1.00 MK 0.98 NL 1.00 OV 0.94 ! PT 1.08 SC 0.97 ! ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.96 KP 1.00* ! LA 1.04 MK 0.75 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.084712Jy sigma=0.000659 ! Fit after self-cal, rms=0.082714Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.799 mas, bmaj=6.802 mas, bpa=5.584 degrees ! Estimated noise=560.442 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105346 Jy ! Component: 100 - total flux cleaned = 0.00148342 Jy ! Component: 150 - total flux cleaned = 0.0015094 Jy ! Component: 200 - total flux cleaned = 0.00149824 Jy ! Total flux subtracted in 200 components = 0.00149824 Jy ! Clean residual min=-0.001844 max=0.001458 Jy/beam ! Clean residual mean=0.000005 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0715491 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 29 components and 0.0715491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082696Jy sigma=0.000658 ! Fit after self-cal, rms=0.082653Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082653Jy sigma=0.000658 ! Fit after self-cal, rms=0.081363Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=6.809 mas, bpa=5.43 degrees ! Estimated noise=562.161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405082 Jy ! Component: 100 - total flux cleaned = 0.000501701 Jy ! Component: 150 - total flux cleaned = 0.000532011 Jy ! Component: 200 - total flux cleaned = 0.000550784 Jy ! Total flux subtracted in 200 components = 0.000550784 Jy ! Clean residual min=-0.001393 max=0.001391 Jy/beam ! Clean residual mean=0.000002 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0720998 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.0720998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081360Jy sigma=0.000657 ! Fit after self-cal, rms=0.081343Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.11176e-05 Jy ! Component: 100 - total flux cleaned = 3.15765e-05 Jy ! Component: 150 - total flux cleaned = 3.15555e-05 Jy ! Component: 200 - total flux cleaned = 3.99005e-05 Jy ! Total flux subtracted in 200 components = 3.99005e-05 Jy ! Clean residual min=-0.001385 max=0.001391 Jy/beam ! Clean residual mean=0.000002 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0721397 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.0721397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081341Jy sigma=0.000657 ! Fit after self-cal, rms=0.081340Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081340Jy sigma=0.000657 ! Fit after self-cal, rms=0.081451Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.798 mas, bmaj=6.804 mas, bpa=5.409 degrees ! Estimated noise=563.459 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342333 Jy ! Component: 100 - total flux cleaned = 0.000416628 Jy ! Component: 150 - total flux cleaned = 0.00042469 Jy ! Component: 200 - total flux cleaned = 0.000432624 Jy ! Total flux subtracted in 200 components = 0.000432624 Jy ! Clean residual min=-0.001380 max=0.001408 Jy/beam ! Clean residual mean=0.000002 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0725724 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0725724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081448Jy sigma=0.000657 ! Fit after self-cal, rms=0.081447Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.66606e-06 Jy ! Component: 100 - total flux cleaned = 1.74673e-05 Jy ! Component: 150 - total flux cleaned = 2.49656e-05 Jy ! Component: 200 - total flux cleaned = 2.45642e-05 Jy ! Total flux subtracted in 200 components = 2.45642e-05 Jy ! Clean residual min=-0.001376 max=0.001412 Jy/beam ! Clean residual mean=0.000002 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0725969 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.0725969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081446Jy sigma=0.000657 ! Fit after self-cal, rms=0.081445Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081445Jy sigma=0.000657 ! Fit after self-cal, rms=0.081600Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.597 mas, bmaj=9.574 mas, bpa=-0.2816 degrees ! Estimated noise=672.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213272 Jy ! Component: 100 - total flux cleaned = 0.00024149 Jy ! Component: 150 - total flux cleaned = 0.000252808 Jy ! Component: 200 - total flux cleaned = 0.000266916 Jy ! Total flux subtracted in 200 components = 0.000266916 Jy ! Clean residual min=-0.001295 max=0.001644 Jy/beam ! Clean residual mean=0.000005 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0728639 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.0728639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081599Jy sigma=0.000657 ! Fit after self-cal, rms=0.081598Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.30445e-05 Jy ! Component: 100 - total flux cleaned = -5.11219e-06 Jy ! Component: 150 - total flux cleaned = 1.85305e-06 Jy ! Component: 200 - total flux cleaned = 5.11915e-06 Jy ! Total flux subtracted in 200 components = 5.11915e-06 Jy ! Clean residual min=-0.001286 max=0.001646 Jy/beam ! Clean residual mean=0.000006 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.072869 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.072869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081598Jy sigma=0.000657 ! Fit after self-cal, rms=0.081598Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=6.8 mas, bpa=5.383 degrees ! Estimated noise=564.828 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.794 x 6.8 at 5.383 degrees (North through East) ! Clean map min=-0.0013947 max=0.065006 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=6.071 mas, bpa=5.645 degrees ! Estimated noise=1100.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0512555 Jy ! Component: 100 - total flux cleaned = 0.0629069 Jy ! Component: 150 - total flux cleaned = 0.0673383 Jy ! Component: 200 - total flux cleaned = 0.0697057 Jy ! Total flux subtracted in 200 components = 0.0697057 Jy ! Clean residual min=-0.002542 max=0.002491 Jy/beam ! Clean residual mean=0.000001 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.0697057 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0697057 Jy ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=6.8 mas, bpa=5.383 degrees ! Estimated noise=564.828 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169015 Jy ! Component: 100 - total flux cleaned = 0.00256956 Jy ! Component: 150 - total flux cleaned = 0.00307543 Jy ! Component: 200 - total flux cleaned = 0.00310406 Jy ! Total flux subtracted in 200 components = 0.00310406 Jy ! Clean residual min=-0.001363 max=0.001406 Jy/beam ! Clean residual mean=0.000002 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0728097 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.0728097 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.597 mas, bmaj=9.574 mas, bpa=-0.2816 degrees ! Estimated noise=672.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.51641e-06 Jy ! Component: 100 - total flux cleaned = 3.35148e-05 Jy ! Component: 150 - total flux cleaned = 5.18346e-05 Jy ! Component: 200 - total flux cleaned = 6.69922e-05 Jy ! Total flux subtracted in 200 components = 6.69922e-05 Jy ! Clean residual min=-0.001277 max=0.001646 Jy/beam ! Clean residual mean=0.000005 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0728767 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.56749e-06 Jy ! Component: 100 - total flux cleaned = 1.2334e-05 Jy ! Component: 150 - total flux cleaned = 1.23931e-05 Jy ! Component: 200 - total flux cleaned = 1.58034e-05 Jy ! Total flux subtracted in 200 components = 1.58034e-05 Jy ! Clean residual min=-0.001277 max=0.001645 Jy/beam ! Clean residual mean=0.000005 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0728925 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.0728925 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=6.8 mas, bpa=5.383 degrees ! Estimated noise=564.828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.1518e-05 Jy ! Component: 100 - total flux cleaned = 6.56196e-05 Jy ! Component: 150 - total flux cleaned = 7.62443e-05 Jy ! Component: 200 - total flux cleaned = 7.58182e-05 Jy ! Total flux subtracted in 200 components = 7.58182e-05 Jy ! Clean residual min=-0.001370 max=0.001405 Jy/beam ! Clean residual mean=0.000002 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0729684 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.0729684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081599Jy sigma=0.000657 ! Fit after self-cal, rms=0.081597Jy sigma=0.000657 wmodel J1324+3622_S_2017_05_27_pus_map.mod ! Writing 37 model components to file: J1324+3622_S_2017_05_27_pus_map.mod wobs J1324+3622_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1324+3622_S_2017_05_27_pus_uvs.fits wwins J1324+3622_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J1324+3622_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212126 Jy ! Component: 100 - total flux cleaned = 0.000118492 Jy ! Component: 150 - total flux cleaned = 0.0001189 Jy ! Component: 200 - total flux cleaned = 0.000161658 Jy ! Component: 250 - total flux cleaned = 0.000266561 Jy ! Component: 300 - total flux cleaned = 0.0003693 Jy ! Component: 350 - total flux cleaned = 0.000488893 Jy ! Component: 400 - total flux cleaned = 0.000586242 Jy ! Component: 450 - total flux cleaned = 0.000662384 Jy ! Component: 500 - total flux cleaned = 0.000755745 Jy ! Component: 550 - total flux cleaned = 0.000847811 Jy ! Component: 600 - total flux cleaned = 0.000884229 Jy ! Component: 650 - total flux cleaned = 0.00104452 Jy ! Component: 700 - total flux cleaned = 0.00113207 Jy ! Component: 750 - total flux cleaned = 0.00121827 Jy ! Component: 800 - total flux cleaned = 0.00133711 Jy ! Component: 850 - total flux cleaned = 0.001437 Jy ! Component: 900 - total flux cleaned = 0.00151951 Jy ! Component: 950 - total flux cleaned = 0.00164944 Jy ! Component: 1000 - total flux cleaned = 0.00176107 Jy ! Component: 1050 - total flux cleaned = 0.00179287 Jy ! Component: 1100 - total flux cleaned = 0.00191733 Jy ! Component: 1150 - total flux cleaned = 0.00197835 Jy ! Component: 1200 - total flux cleaned = 0.00205384 Jy ! Component: 1250 - total flux cleaned = 0.00208373 Jy ! Component: 1300 - total flux cleaned = 0.00215761 Jy ! Component: 1350 - total flux cleaned = 0.00224495 Jy ! Component: 1400 - total flux cleaned = 0.00233155 Jy ! Component: 1450 - total flux cleaned = 0.00237403 Jy ! Component: 1500 - total flux cleaned = 0.00244446 Jy ! Component: 1550 - total flux cleaned = 0.00251414 Jy ! Component: 1600 - total flux cleaned = 0.0025691 Jy ! Component: 1650 - total flux cleaned = 0.00259638 Jy ! Component: 1700 - total flux cleaned = 0.00262361 Jy ! Component: 1750 - total flux cleaned = 0.00265035 Jy ! Component: 1800 - total flux cleaned = 0.00274297 Jy ! Component: 1850 - total flux cleaned = 0.002743 Jy ! Component: 1900 - total flux cleaned = 0.00273003 Jy ! Component: 1950 - total flux cleaned = 0.00278156 Jy ! Component: 2000 - total flux cleaned = 0.00280692 Jy ! Component: 2050 - total flux cleaned = 0.0028446 Jy ! Component: 2100 - total flux cleaned = 0.00285702 Jy ! Component: 2150 - total flux cleaned = 0.00285724 Jy ! Component: 2200 - total flux cleaned = 0.00289414 Jy ! Component: 2250 - total flux cleaned = 0.00291836 Jy ! Component: 2300 - total flux cleaned = 0.00289413 Jy ! Component: 2350 - total flux cleaned = 0.0029301 Jy ! Component: 2400 - total flux cleaned = 0.00293012 Jy ! Component: 2450 - total flux cleaned = 0.00295356 Jy ! Component: 2500 - total flux cleaned = 0.00295357 Jy ! Component: 2550 - total flux cleaned = 0.0029652 Jy ! Component: 2600 - total flux cleaned = 0.00297669 Jy ! Component: 2650 - total flux cleaned = 0.00297665 Jy ! Component: 2700 - total flux cleaned = 0.00302205 Jy ! Component: 2750 - total flux cleaned = 0.00304455 Jy ! Component: 2800 - total flux cleaned = 0.0030667 Jy ! Component: 2850 - total flux cleaned = 0.00312208 Jy ! Component: 2900 - total flux cleaned = 0.00313318 Jy ! Component: 2950 - total flux cleaned = 0.00313304 Jy ! Component: 3000 - total flux cleaned = 0.00318712 Jy ! Component: 3050 - total flux cleaned = 0.00319797 Jy ! Component: 3100 - total flux cleaned = 0.0032515 Jy ! Component: 3150 - total flux cleaned = 0.00328341 Jy ! Component: 3200 - total flux cleaned = 0.00330447 Jy ! Component: 3250 - total flux cleaned = 0.00330448 Jy ! Component: 3300 - total flux cleaned = 0.00332533 Jy ! Component: 3350 - total flux cleaned = 0.0033874 Jy ! Component: 3400 - total flux cleaned = 0.00339768 Jy ! Component: 3450 - total flux cleaned = 0.00337727 Jy ! Component: 3500 - total flux cleaned = 0.00337738 Jy ! Component: 3550 - total flux cleaned = 0.00342783 Jy ! Component: 3600 - total flux cleaned = 0.00343794 Jy ! Component: 3650 - total flux cleaned = 0.00349768 Jy ! Component: 3700 - total flux cleaned = 0.0035076 Jy ! Component: 3750 - total flux cleaned = 0.00348785 Jy ! Component: 3800 - total flux cleaned = 0.00349765 Jy ! Component: 3850 - total flux cleaned = 0.00353655 Jy ! Component: 3900 - total flux cleaned = 0.00351712 Jy ! Component: 3950 - total flux cleaned = 0.00351708 Jy ! Component: 4000 - total flux cleaned = 0.00354573 Jy ! Component: 4050 - total flux cleaned = 0.00351727 Jy ! Total flux subtracted in 4096 components = 0.00353619 Jy ! Clean residual min=-0.000571 max=0.000543 Jy/beam ! Clean residual mean=0.000000 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.0765046 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 359 components and 0.0765046 Jy ![Exited script file: muppet] wmap "J1324+3622_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.794 x 6.8 at 5.383 degrees (North through East) ! Clean map min=-0.0010728 max=0.065082 Jy/beam ! Writing clean map to FITS file: J1324+3622_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0650817 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000176369 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.812987 0.812987 1.62597 3.25195 6.5039 13.0078 26.0156 52.0312 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.794 x 6.8 at 5.383 degrees (North through East) ! Clean map min=-0.0010728 max=0.065082 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1324+3622_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:08:44 2019