! Started logfile: J1323-4452_S_2017_06_10_pus_uvs.log on Mon May 6 14:54:22 2019 obs J1323-4452_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1323-4452_S_2017_06_10_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.368889 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1323-4452 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 9628 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1323-4452_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 543 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 543 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 573 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1186 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.832270Jy sigma=0.004866 ! Fit after self-cal, rms=0.726714Jy sigma=0.004269 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.465 mas, bmaj=8.526 mas, bpa=-7.905 degrees ! Estimated noise=2545.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.307196 Jy ! Component: 100 - total flux cleaned = 0.490769 Jy ! Total flux subtracted in 100 components = 0.490769 Jy ! Clean residual min=-0.071294 max=0.098956 Jy/beam ! Clean residual mean=-0.002040 rms=0.032875 Jy/beam ! Combined flux in latest and established models = 0.490769 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 59 components and 0.490769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367425Jy sigma=0.002081 ! Fit after self-cal, rms=0.366776Jy sigma=0.002077 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=11.07 mas, bpa=-4.867 degrees ! Estimated noise=1419.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.168033 Jy ! Component: 100 - total flux cleaned = 0.266983 Jy ! Component: 150 - total flux cleaned = 0.278598 Jy ! Component: 200 - total flux cleaned = 0.278651 Jy ! Total flux subtracted in 200 components = 0.278651 Jy ! Clean residual min=-0.049274 max=0.049163 Jy/beam ! Clean residual mean=-0.001751 rms=0.025099 Jy/beam ! Combined flux in latest and established models = 0.76942 Jy ! Performing phase self-cal ! Adding 172 model components to the UV plane model. ! The established model now contains 216 components and 0.769421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241338Jy sigma=0.001372 ! Fit after self-cal, rms=0.237663Jy sigma=0.001346 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 1.07 ! LA 0.73 MK 1.14 NL 1.00* OV 1.10 ! PT 0.94 SC 1.37 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.02 ! LA 0.71 MK 1.04 NL 1.00* OV 1.14 ! PT 0.90 SC 1.13 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 0.99 ! LA 0.70 MK 1.12 NL 1.00* OV 1.02 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 4. ! A total of 264 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.237663Jy sigma=0.001346 ! Fit after self-cal, rms=0.165655Jy sigma=0.001075 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.393 mas, bmaj=11.76 mas, bpa=-4.187 degrees ! Estimated noise=1350.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0564419 Jy ! Component: 100 - total flux cleaned = 0.0768452 Jy ! Component: 150 - total flux cleaned = 0.0809079 Jy ! Component: 200 - total flux cleaned = 0.087594 Jy ! Total flux subtracted in 200 components = 0.087594 Jy ! Clean residual min=-0.017562 max=0.017533 Jy/beam ! Clean residual mean=0.000497 rms=0.008037 Jy/beam ! Combined flux in latest and established models = 0.857015 Jy ! Performing phase self-cal ! Adding 126 model components to the UV plane model. ! The established model now contains 342 components and 0.857015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136315Jy sigma=0.000825 ! Fit after self-cal, rms=0.133762Jy sigma=0.000813 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133762Jy sigma=0.000813 ! Fit after self-cal, rms=0.127181Jy sigma=0.000765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=11.69 mas, bpa=-4.263 degrees ! Estimated noise=1322.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238108 Jy ! Component: 100 - total flux cleaned = 0.0304848 Jy ! Component: 150 - total flux cleaned = 0.0373943 Jy ! Component: 200 - total flux cleaned = 0.0434043 Jy ! Total flux subtracted in 200 components = 0.0434043 Jy ! Clean residual min=-0.008543 max=0.008507 Jy/beam ! Clean residual mean=0.000274 rms=0.003794 Jy/beam ! Combined flux in latest and established models = 0.900419 Jy selfcal ! Performing phase self-cal ! Adding 99 model components to the UV plane model. ! The established model now contains 438 components and 0.900419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119598Jy sigma=0.000711 ! Fit after self-cal, rms=0.118405Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350886 Jy ! Component: 100 - total flux cleaned = 0.00491558 Jy ! Component: 150 - total flux cleaned = 0.00818276 Jy ! Component: 200 - total flux cleaned = 0.00967037 Jy ! Total flux subtracted in 200 components = 0.00967037 Jy ! Clean residual min=-0.005902 max=0.005929 Jy/beam ! Clean residual mean=0.000197 rms=0.002744 Jy/beam ! Combined flux in latest and established models = 0.91009 Jy ! Performing phase self-cal ! Adding 95 model components to the UV plane model. ! The established model now contains 514 components and 0.910089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115430Jy sigma=0.000687 ! Fit after self-cal, rms=0.114749Jy sigma=0.000686 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114749Jy sigma=0.000686 ! Fit after self-cal, rms=0.114017Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=11.7 mas, bpa=-4.135 degrees ! Estimated noise=1316.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00583833 Jy ! Component: 100 - total flux cleaned = 0.00756126 Jy ! Component: 150 - total flux cleaned = 0.00963727 Jy ! Component: 200 - total flux cleaned = 0.0109641 Jy ! Total flux subtracted in 200 components = 0.0109641 Jy ! Clean residual min=-0.004240 max=0.004240 Jy/beam ! Clean residual mean=0.000121 rms=0.001961 Jy/beam ! Combined flux in latest and established models = 0.921053 Jy selfcal ! Performing phase self-cal ! Adding 95 model components to the UV plane model. ! The established model now contains 589 components and 0.921053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112430Jy sigma=0.000673 ! Fit after self-cal, rms=0.111972Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100399 Jy ! Component: 100 - total flux cleaned = 0.000707166 Jy ! Component: 150 - total flux cleaned = 0.000484657 Jy ! Component: 200 - total flux cleaned = 0.000703977 Jy ! Total flux subtracted in 200 components = 0.000703977 Jy ! Clean residual min=-0.003237 max=0.003274 Jy/beam ! Clean residual mean=0.000092 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.921757 Jy ! Performing phase self-cal ! Adding 109 model components to the UV plane model. ! The established model now contains 669 components and 0.921758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111085Jy sigma=0.000666 ! Fit after self-cal, rms=0.110766Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110766Jy sigma=0.000665 ! Fit after self-cal, rms=0.110092Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.85 mas, bmaj=37.61 mas, bpa=1.604 degrees ! Estimated noise=1594.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016791 Jy ! Component: 100 - total flux cleaned = -0.00136596 Jy ! Component: 150 - total flux cleaned = -0.00256821 Jy ! Component: 200 - total flux cleaned = -0.00297328 Jy ! Total flux subtracted in 200 components = -0.00297328 Jy ! Clean residual min=-0.003196 max=0.003227 Jy/beam ! Clean residual mean=0.000079 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.918784 Jy selfcal ! Performing phase self-cal ! Adding 119 model components to the UV plane model. ! The established model now contains 781 components and 0.918784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109427Jy sigma=0.000660 ! Fit after self-cal, rms=0.109113Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000793415 Jy ! Component: 100 - total flux cleaned = 0.000785431 Jy ! Component: 150 - total flux cleaned = 0.000466659 Jy ! Component: 200 - total flux cleaned = 0.000463091 Jy ! Total flux subtracted in 200 components = 0.000463091 Jy ! Clean residual min=-0.002371 max=0.002338 Jy/beam ! Clean residual mean=0.000047 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.919247 Jy ! Performing phase self-cal ! Adding 119 model components to the UV plane model. ! The established model now contains 892 components and 0.919247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108743Jy sigma=0.000657 ! Fit after self-cal, rms=0.108531Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=11.65 mas, bpa=-4.223 degrees ! Estimated noise=1310.23 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.334 x 11.65 at -4.223 degrees (North through East) ! Clean map min=-0.013667 max=0.28888 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=8.878 mas, bpa=-6.921 degrees ! Estimated noise=2201.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.28222 Jy ! Component: 100 - total flux cleaned = 0.447035 Jy ! Component: 150 - total flux cleaned = 0.562857 Jy ! Component: 200 - total flux cleaned = 0.647187 Jy ! Total flux subtracted in 200 components = 0.647187 Jy ! Clean residual min=-0.045968 max=0.047673 Jy/beam ! Clean residual mean=-0.000752 rms=0.018658 Jy/beam ! Combined flux in latest and established models = 0.647187 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 107 model components to the UV plane model. ! The established model now contains 107 components and 0.647187 Jy ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=11.65 mas, bpa=-4.223 degrees ! Estimated noise=1310.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0748553 Jy ! Component: 100 - total flux cleaned = 0.117804 Jy ! Component: 150 - total flux cleaned = 0.155374 Jy ! Component: 200 - total flux cleaned = 0.179663 Jy ! Total flux subtracted in 200 components = 0.179663 Jy ! Clean residual min=-0.027931 max=0.028106 Jy/beam ! Clean residual mean=-0.000184 rms=0.012698 Jy/beam ! Combined flux in latest and established models = 0.82685 Jy ! Adding 139 model components to the UV plane model. ! The established model now contains 236 components and 0.82685 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.85 mas, bmaj=37.61 mas, bpa=1.604 degrees ! Estimated noise=1594.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351702 Jy ! Component: 100 - total flux cleaned = 0.0467345 Jy ! Component: 150 - total flux cleaned = 0.0563788 Jy ! Component: 200 - total flux cleaned = 0.0589322 Jy ! Total flux subtracted in 200 components = 0.0589322 Jy ! Clean residual min=-0.019570 max=0.019576 Jy/beam ! Clean residual mean=-0.000082 rms=0.010325 Jy/beam ! Combined flux in latest and established models = 0.885782 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442628 Jy ! Component: 100 - total flux cleaned = 0.0119262 Jy ! Component: 150 - total flux cleaned = 0.0159488 Jy ! Component: 200 - total flux cleaned = 0.0224436 Jy ! Total flux subtracted in 200 components = 0.0224436 Jy ! Clean residual min=-0.011100 max=0.011244 Jy/beam ! Clean residual mean=0.000022 rms=0.006165 Jy/beam ! Combined flux in latest and established models = 0.908226 Jy ! Adding 259 model components to the UV plane model. ! The established model now contains 484 components and 0.908226 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=11.65 mas, bpa=-4.223 degrees ! Estimated noise=1310.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210858 Jy ! Component: 100 - total flux cleaned = 0.000839685 Jy ! Component: 150 - total flux cleaned = -0.000687055 Jy ! Component: 200 - total flux cleaned = -0.0013904 Jy ! Total flux subtracted in 200 components = -0.0013904 Jy ! Clean residual min=-0.005320 max=0.005324 Jy/beam ! Clean residual mean=-0.000011 rms=0.002487 Jy/beam ! Combined flux in latest and established models = 0.906835 Jy selfcal ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 555 components and 0.906835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110985Jy sigma=0.000673 ! Fit after self-cal, rms=0.110487Jy sigma=0.000670 wmodel J1323-4452_S_2017_06_10_pus_map.mod ! Writing 555 model components to file: J1323-4452_S_2017_06_10_pus_map.mod wobs J1323-4452_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1323-4452_S_2017_06_10_pus_uvs.fits wwins J1323-4452_S_2017_06_10_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1323-4452_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.334 x 11.65 at -4.223 degrees (North through East) ! Clean map min=-0.024369 max=0.25212 Jy/beam ! Writing clean map to FITS file: J1323-4452_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.252122 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00243912 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.90231 2.90231 5.80461 11.6092 23.2185 46.4369 92.8738 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0073 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.252 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.334 x 11.65 at -4.223 degrees (North through East) ! Clean map min=-0.024369 max=0.25212 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1323-4452_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:54:26 2019