! Started logfile: J1323-3849_S_2017_03_23_pus_uvs.log on Mon May 13 10:00:46 2019 obs J1323-3849_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1323-3849_S_2017_03_23_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.578246 visibilities/baseline/integration-bin. ! Found source: J1323-3849 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 9888 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1323-3849_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 342 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 282 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 247 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 424 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.880711Jy sigma=0.004814 ! Fit after self-cal, rms=0.814857Jy sigma=0.004444 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.42 mas, bmaj=8.121 mas, bpa=2.334 degrees ! Estimated noise=3359.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.141648 Jy ! Component: 100 - total flux cleaned = 0.175481 Jy ! Total flux subtracted in 100 components = 0.175481 Jy ! Clean residual min=-0.015169 max=0.021098 Jy/beam ! Clean residual mean=-0.000289 rms=0.004190 Jy/beam ! Combined flux in latest and established models = 0.175481 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.175481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150686Jy sigma=0.000725 ! Fit after self-cal, rms=0.150700Jy sigma=0.000725 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=10.05 mas, bpa=2.264 degrees ! Estimated noise=1561.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315473 Jy ! Component: 100 - total flux cleaned = 0.0483774 Jy ! Component: 150 - total flux cleaned = 0.0575678 Jy ! Component: 200 - total flux cleaned = 0.0625862 Jy ! Total flux subtracted in 200 components = 0.0625862 Jy ! Clean residual min=-0.013470 max=0.017838 Jy/beam ! Clean residual mean=-0.000578 rms=0.003603 Jy/beam ! Combined flux in latest and established models = 0.238067 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 23 components and 0.238067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144209Jy sigma=0.000685 ! Fit after self-cal, rms=0.144204Jy sigma=0.000685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.15 KP 1.08 ! LA 0.94 MK 0.93 NL 1.00* OV 1.02 ! PT 0.98 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.20 KP 1.02 ! LA 0.91 MK 0.93 NL 1.11 OV 1.08 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.21 KP 0.87 ! LA 0.71 MK 0.99 NL 1.39 OV 0.92 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.32 FD 1.09 HN 1.22 KP 1.00* ! LA 0.66 MK 1.09 NL 1.00* OV 1.30 ! PT 1.01 SC 1.23 ! ! ! Fit before self-cal, rms=0.144204Jy sigma=0.000685 ! Fit after self-cal, rms=0.162014Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=10.12 mas, bpa=2.514 degrees ! Estimated noise=1557.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000928765 Jy ! Component: 100 - total flux cleaned = -0.000927771 Jy ! Component: 150 - total flux cleaned = -0.000926782 Jy ! Component: 200 - total flux cleaned = -0.00104188 Jy ! Total flux subtracted in 200 components = -0.00104188 Jy ! Clean residual min=-0.007181 max=0.007578 Jy/beam ! Clean residual mean=-0.000215 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.237025 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.237025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161928Jy sigma=0.000647 ! Fit after self-cal, rms=0.163026Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163026Jy sigma=0.000646 ! Fit after self-cal, rms=0.166142Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=10.18 mas, bpa=2.544 degrees ! Estimated noise=1561.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000802827 Jy ! Component: 100 - total flux cleaned = -0.000738955 Jy ! Component: 150 - total flux cleaned = -0.0007361 Jy ! Component: 200 - total flux cleaned = -0.000735203 Jy ! Total flux subtracted in 200 components = -0.000735203 Jy ! Clean residual min=-0.006064 max=0.007032 Jy/beam ! Clean residual mean=-0.000153 rms=0.001638 Jy/beam ! Combined flux in latest and established models = 0.23629 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.23629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166084Jy sigma=0.000644 ! Fit after self-cal, rms=0.166116Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.09832e-05 Jy ! Component: 100 - total flux cleaned = -8.07975e-06 Jy ! Component: 150 - total flux cleaned = -9.54372e-05 Jy ! Component: 200 - total flux cleaned = -0.000136452 Jy ! Total flux subtracted in 200 components = -0.000136452 Jy ! Clean residual min=-0.005903 max=0.006950 Jy/beam ! Clean residual mean=-0.000155 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 0.236154 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.236154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166087Jy sigma=0.000644 ! Fit after self-cal, rms=0.166071Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166071Jy sigma=0.000644 ! Fit after self-cal, rms=0.166952Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=10.21 mas, bpa=2.628 degrees ! Estimated noise=1565.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000618524 Jy ! Component: 100 - total flux cleaned = -0.000621124 Jy ! Component: 150 - total flux cleaned = -0.000621365 Jy ! Component: 200 - total flux cleaned = -0.000619912 Jy ! Total flux subtracted in 200 components = -0.000619912 Jy ! Clean residual min=-0.005698 max=0.006955 Jy/beam ! Clean residual mean=-0.000150 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 0.235534 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.235534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166915Jy sigma=0.000644 ! Fit after self-cal, rms=0.166908Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30.5, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00654502 Jy ! Component: 100 - total flux cleaned = 0.00957264 Jy ! Component: 150 - total flux cleaned = 0.0104969 Jy ! Component: 200 - total flux cleaned = 0.0112006 Jy ! Total flux subtracted in 200 components = 0.0112006 Jy ! Clean residual min=-0.005474 max=0.005689 Jy/beam ! Clean residual mean=-0.000064 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 0.246734 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 57 components and 0.246734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166685Jy sigma=0.000641 ! Fit after self-cal, rms=0.166663Jy sigma=0.000641 ! Inverting map ! Added new window around map position (14, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00494131 Jy ! Component: 100 - total flux cleaned = 0.00732397 Jy ! Component: 150 - total flux cleaned = 0.0082448 Jy ! Component: 200 - total flux cleaned = 0.00861748 Jy ! Total flux subtracted in 200 components = 0.00861748 Jy ! Clean residual min=-0.004602 max=0.003987 Jy/beam ! Clean residual mean=-0.000017 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.255352 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 71 components and 0.255352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166507Jy sigma=0.000640 ! Fit after self-cal, rms=0.166388Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166388Jy sigma=0.000640 ! Fit after self-cal, rms=0.165440Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.008 mas, bmaj=26.36 mas, bpa=-1.096 degrees ! Estimated noise=1977.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395997 Jy ! Component: 100 - total flux cleaned = 0.00485749 Jy ! Component: 150 - total flux cleaned = 0.00511774 Jy ! Component: 200 - total flux cleaned = 0.00511956 Jy ! Total flux subtracted in 200 components = 0.00511956 Jy ! Clean residual min=-0.004433 max=0.004844 Jy/beam ! Clean residual mean=0.000017 rms=0.001460 Jy/beam ! Combined flux in latest and established models = 0.260471 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 0.260471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165400Jy sigma=0.000639 ! Fit after self-cal, rms=0.165357Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155491 Jy ! Component: 100 - total flux cleaned = 0.00155853 Jy ! Component: 150 - total flux cleaned = 0.001557 Jy ! Component: 200 - total flux cleaned = 0.00155789 Jy ! Total flux subtracted in 200 components = 0.00155789 Jy ! Clean residual min=-0.004331 max=0.004642 Jy/beam ! Clean residual mean=0.000038 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.262029 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 111 components and 0.262029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165338Jy sigma=0.000639 ! Fit after self-cal, rms=0.165329Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=10.19 mas, bpa=2.681 degrees ! Estimated noise=1561.23 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 10.19 at 2.681 degrees (North through East) ! Clean map min=-0.0036997 max=0.18183 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.389 mas, bmaj=8.03 mas, bpa=2.833 degrees ! Estimated noise=3488.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.146556 Jy ! Component: 100 - total flux cleaned = 0.183632 Jy ! Component: 150 - total flux cleaned = 0.202515 Jy ! Component: 200 - total flux cleaned = 0.214228 Jy ! Total flux subtracted in 200 components = 0.214228 Jy ! Clean residual min=-0.008878 max=0.008523 Jy/beam ! Clean residual mean=-0.000093 rms=0.002219 Jy/beam ! Combined flux in latest and established models = 0.214228 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.214228 Jy ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=10.19 mas, bpa=2.681 degrees ! Estimated noise=1561.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120251 Jy ! Component: 100 - total flux cleaned = 0.0202806 Jy ! Component: 150 - total flux cleaned = 0.0264926 Jy ! Component: 200 - total flux cleaned = 0.0313284 Jy ! Total flux subtracted in 200 components = 0.0313284 Jy ! Clean residual min=-0.004637 max=0.004441 Jy/beam ! Clean residual mean=-0.000081 rms=0.001276 Jy/beam ! Combined flux in latest and established models = 0.245557 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 74 components and 0.245557 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.008 mas, bmaj=26.36 mas, bpa=-1.096 degrees ! Estimated noise=1977.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632717 Jy ! Component: 100 - total flux cleaned = 0.0102301 Jy ! Component: 150 - total flux cleaned = 0.0127596 Jy ! Component: 200 - total flux cleaned = 0.0144419 Jy ! Total flux subtracted in 200 components = 0.0144419 Jy ! Clean residual min=-0.004264 max=0.004399 Jy/beam ! Clean residual mean=0.000014 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.259999 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311846 Jy ! Component: 100 - total flux cleaned = 0.000545476 Jy ! Component: 150 - total flux cleaned = 0.000760592 Jy ! Component: 200 - total flux cleaned = 0.000956178 Jy ! Total flux subtracted in 200 components = 0.000956178 Jy ! Clean residual min=-0.004170 max=0.004311 Jy/beam ! Clean residual mean=0.000025 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.260955 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 113 components and 0.260955 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=10.19 mas, bpa=2.681 degrees ! Estimated noise=1561.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000513382 Jy ! Component: 100 - total flux cleaned = -0.00035019 Jy ! Component: 150 - total flux cleaned = -0.000358426 Jy ! Component: 200 - total flux cleaned = -0.000194876 Jy ! Total flux subtracted in 200 components = -0.000194876 Jy ! Clean residual min=-0.003618 max=0.004294 Jy/beam ! Clean residual mean=0.000011 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.26076 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 134 components and 0.26076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165248Jy sigma=0.000639 ! Fit after self-cal, rms=0.165156Jy sigma=0.000639 wmodel J1323-3849_S_2017_03_23_pus_map.mod ! Writing 134 model components to file: J1323-3849_S_2017_03_23_pus_map.mod wobs J1323-3849_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1323-3849_S_2017_03_23_pus_uvs.fits wwins J1323-3849_S_2017_03_23_pus_map.win ! wwins: Wrote 4 windows to J1323-3849_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131753 Jy ! Component: 100 - total flux cleaned = 0.000501754 Jy ! Component: 150 - total flux cleaned = 0.00101691 Jy ! Component: 200 - total flux cleaned = 0.00149875 Jy ! Component: 250 - total flux cleaned = 0.00175266 Jy ! Component: 300 - total flux cleaned = 0.00204546 Jy ! Component: 350 - total flux cleaned = 0.00232801 Jy ! Component: 400 - total flux cleaned = 0.00260193 Jy ! Component: 450 - total flux cleaned = 0.00273422 Jy ! Component: 500 - total flux cleaned = 0.00273314 Jy ! Component: 550 - total flux cleaned = 0.00265013 Jy ! Component: 600 - total flux cleaned = 0.00248948 Jy ! Component: 650 - total flux cleaned = 0.00252908 Jy ! Component: 700 - total flux cleaned = 0.00249029 Jy ! Component: 750 - total flux cleaned = 0.00245231 Jy ! Component: 800 - total flux cleaned = 0.00237824 Jy ! Component: 850 - total flux cleaned = 0.00230555 Jy ! Component: 900 - total flux cleaned = 0.00220043 Jy ! Component: 950 - total flux cleaned = 0.00223524 Jy ! Component: 1000 - total flux cleaned = 0.00216747 Jy ! Component: 1050 - total flux cleaned = 0.00216675 Jy ! Component: 1100 - total flux cleaned = 0.00210179 Jy ! Component: 1150 - total flux cleaned = 0.00213378 Jy ! Component: 1200 - total flux cleaned = 0.00213382 Jy ! Component: 1250 - total flux cleaned = 0.00210248 Jy ! Component: 1300 - total flux cleaned = 0.00210212 Jy ! Component: 1350 - total flux cleaned = 0.0020425 Jy ! Component: 1400 - total flux cleaned = 0.00198346 Jy ! Component: 1450 - total flux cleaned = 0.00192593 Jy ! Component: 1500 - total flux cleaned = 0.00184045 Jy ! Component: 1550 - total flux cleaned = 0.00175629 Jy ! Component: 1600 - total flux cleaned = 0.00170061 Jy ! Component: 1650 - total flux cleaned = 0.00159178 Jy ! Component: 1700 - total flux cleaned = 0.00159211 Jy ! Component: 1750 - total flux cleaned = 0.00151313 Jy ! Component: 1800 - total flux cleaned = 0.00151328 Jy ! Component: 1850 - total flux cleaned = 0.00143619 Jy ! Component: 1900 - total flux cleaned = 0.00146184 Jy ! Component: 1950 - total flux cleaned = 0.00143674 Jy ! Component: 2000 - total flux cleaned = 0.00143697 Jy ! Component: 2050 - total flux cleaned = 0.00148609 Jy ! Component: 2100 - total flux cleaned = 0.00146161 Jy ! Component: 2150 - total flux cleaned = 0.00150952 Jy ! Component: 2200 - total flux cleaned = 0.00150926 Jy ! Component: 2250 - total flux cleaned = 0.0015796 Jy ! Component: 2300 - total flux cleaned = 0.00153278 Jy ! Component: 2350 - total flux cleaned = 0.00162495 Jy ! Component: 2400 - total flux cleaned = 0.00162461 Jy ! Component: 2450 - total flux cleaned = 0.0016472 Jy ! Component: 2500 - total flux cleaned = 0.00169207 Jy ! Component: 2550 - total flux cleaned = 0.00178051 Jy ! Component: 2600 - total flux cleaned = 0.00180228 Jy ! Component: 2650 - total flux cleaned = 0.00184589 Jy ! Component: 2700 - total flux cleaned = 0.00186736 Jy ! Component: 2750 - total flux cleaned = 0.00193124 Jy ! Component: 2800 - total flux cleaned = 0.00191014 Jy ! Component: 2850 - total flux cleaned = 0.00199422 Jy ! Component: 2900 - total flux cleaned = 0.00201487 Jy ! Component: 2950 - total flux cleaned = 0.00209747 Jy ! Component: 3000 - total flux cleaned = 0.00215875 Jy ! Component: 3050 - total flux cleaned = 0.00215863 Jy ! Component: 3100 - total flux cleaned = 0.00223946 Jy ! Component: 3150 - total flux cleaned = 0.00231958 Jy ! Component: 3200 - total flux cleaned = 0.00235946 Jy ! Component: 3250 - total flux cleaned = 0.00239908 Jy ! Component: 3300 - total flux cleaned = 0.00247746 Jy ! Component: 3350 - total flux cleaned = 0.00249703 Jy ! Component: 3400 - total flux cleaned = 0.00249717 Jy ! Component: 3450 - total flux cleaned = 0.00259317 Jy ! Component: 3500 - total flux cleaned = 0.00261213 Jy ! Component: 3550 - total flux cleaned = 0.0026123 Jy ! Component: 3600 - total flux cleaned = 0.00264995 Jy ! Component: 3650 - total flux cleaned = 0.00270625 Jy ! Component: 3700 - total flux cleaned = 0.00278068 Jy ! Component: 3750 - total flux cleaned = 0.00279912 Jy ! Component: 3800 - total flux cleaned = 0.00281763 Jy ! Component: 3850 - total flux cleaned = 0.00287241 Jy ! Component: 3900 - total flux cleaned = 0.00283605 Jy ! Component: 3950 - total flux cleaned = 0.00287236 Jy ! Component: 4000 - total flux cleaned = 0.00292615 Jy ! Component: 4050 - total flux cleaned = 0.0029083 Jy ! Total flux subtracted in 4096 components = 0.00290843 Jy ! Clean residual min=-0.000988 max=0.000978 Jy/beam ! Clean residual mean=0.000007 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.263668 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 389 components and 0.263668 Jy ![Exited script file: muppet] wmap "J1323-3849_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 10.19 at 2.681 degrees (North through East) ! Clean map min=-0.0025891 max=0.18541 Jy/beam ! Writing clean map to FITS file: J1323-3849_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.185408 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00031321 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.506791 0.506791 1.01358 2.02717 4.05433 8.10866 16.2173 32.4346 64.8693 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.185 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 10.19 at 2.681 degrees (North through East) ! Clean map min=-0.0025891 max=0.18541 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1323-3849_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:00:51 2019