! Started logfile: J1323-3038_S_2017_03_23_pus_uvs.log on Mon May 13 10:00:34 2019 obs J1323-3038_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1323-3038_S_2017_03_23_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.799704 visibilities/baseline/integration-bin. ! Found source: J1323-3038 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 10796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1323-3038_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 352 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.885884Jy sigma=0.005488 ! Fit after self-cal, rms=0.854180Jy sigma=0.005301 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.465 mas, bmaj=6.544 mas, bpa=-9.651 degrees ! Estimated noise=2518.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105597 Jy ! Component: 100 - total flux cleaned = 0.138161 Jy ! Total flux subtracted in 100 components = 0.138161 Jy ! Clean residual min=-0.010280 max=0.018494 Jy/beam ! Clean residual mean=-0.000044 rms=0.002965 Jy/beam ! Combined flux in latest and established models = 0.138161 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.138161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125038Jy sigma=0.000706 ! Fit after self-cal, rms=0.124952Jy sigma=0.000705 ! Inverting map ! Added new window around map position (2.5, -7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175786 Jy ! Component: 100 - total flux cleaned = 0.0267714 Jy ! Total flux subtracted in 100 components = 0.0267714 Jy ! Clean residual min=-0.009492 max=0.014726 Jy/beam ! Clean residual mean=-0.000027 rms=0.002590 Jy/beam ! Combined flux in latest and established models = 0.164932 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 0.164932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121586Jy sigma=0.000685 ! Fit after self-cal, rms=0.121469Jy sigma=0.000684 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=8.304 mas, bpa=-4.534 degrees ! Estimated noise=1250.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125733 Jy ! Component: 100 - total flux cleaned = 0.019352 Jy ! Component: 150 - total flux cleaned = 0.0215872 Jy ! Component: 200 - total flux cleaned = 0.0221728 Jy ! Total flux subtracted in 200 components = 0.0221728 Jy ! Clean residual min=-0.006136 max=0.008037 Jy/beam ! Clean residual mean=-0.000053 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.187105 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 36 components and 0.187105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119957Jy sigma=0.000676 ! Fit after self-cal, rms=0.119840Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.09 KP 1.04 ! LA 0.97 MK 0.99 NL 0.94 OV 1.04 ! PT 1.04 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.24 KP 1.01 ! LA 0.95 MK 0.95 NL 1.02 OV 1.05 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.06 HN 1.16 KP 0.93 ! LA 0.74 MK 0.99 NL 1.11 OV 1.00 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.10 HN 0.92 KP 1.00* ! LA 0.82 MK 1.01 NL 1.00* OV 1.12 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.119840Jy sigma=0.000675 ! Fit after self-cal, rms=0.115238Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=8.172 mas, bpa=-3.812 degrees ! Estimated noise=1233.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.5, -70.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307567 Jy ! Component: 100 - total flux cleaned = 0.00270265 Jy ! Component: 150 - total flux cleaned = 0.00167534 Jy ! Component: 200 - total flux cleaned = 0.00137227 Jy ! Total flux subtracted in 200 components = 0.00137227 Jy ! Clean residual min=-0.004290 max=0.004453 Jy/beam ! Clean residual mean=-0.000009 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.188477 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.188477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114826Jy sigma=0.000663 ! Fit after self-cal, rms=0.114754Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114754Jy sigma=0.000663 ! Fit after self-cal, rms=0.124784Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=8.34 mas, bpa=-3.537 degrees ! Estimated noise=1243.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000339187 Jy ! Component: 100 - total flux cleaned = -0.000272572 Jy ! Component: 150 - total flux cleaned = -0.000161581 Jy ! Component: 200 - total flux cleaned = -0.000160396 Jy ! Total flux subtracted in 200 components = -0.000160396 Jy ! Clean residual min=-0.003425 max=0.003018 Jy/beam ! Clean residual mean=-0.000004 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.188317 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 81 components and 0.188317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124728Jy sigma=0.000657 ! Fit after self-cal, rms=0.124885Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235335 Jy ! Component: 100 - total flux cleaned = -0.000144615 Jy ! Component: 150 - total flux cleaned = -0.000145581 Jy ! Component: 200 - total flux cleaned = -0.000183294 Jy ! Total flux subtracted in 200 components = -0.000183294 Jy ! Clean residual min=-0.003321 max=0.002907 Jy/beam ! Clean residual mean=-0.000004 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.188133 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 90 components and 0.188133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124854Jy sigma=0.000656 ! Fit after self-cal, rms=0.124851Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124851Jy sigma=0.000656 ! Fit after self-cal, rms=0.126664Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=8.382 mas, bpa=-3.45 degrees ! Estimated noise=1244.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.91241e-05 Jy ! Component: 100 - total flux cleaned = 5.41531e-05 Jy ! Component: 150 - total flux cleaned = 1.59401e-05 Jy ! Component: 200 - total flux cleaned = 1.58891e-05 Jy ! Total flux subtracted in 200 components = 1.58891e-05 Jy ! Clean residual min=-0.003191 max=0.002849 Jy/beam ! Clean residual mean=-0.000004 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.188149 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 98 components and 0.188149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126637Jy sigma=0.000656 ! Fit after self-cal, rms=0.126650Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.35535e-05 Jy ! Component: 100 - total flux cleaned = -4.57442e-05 Jy ! Component: 150 - total flux cleaned = -7.60062e-05 Jy ! Component: 200 - total flux cleaned = -0.00010593 Jy ! Total flux subtracted in 200 components = -0.00010593 Jy ! Clean residual min=-0.003175 max=0.002799 Jy/beam ! Clean residual mean=-0.000005 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.188043 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 104 components and 0.188043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126630Jy sigma=0.000656 ! Fit after self-cal, rms=0.126629Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126629Jy sigma=0.000656 ! Fit after self-cal, rms=0.127187Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.155 mas, bmaj=19.6 mas, bpa=-0.08333 degrees ! Estimated noise=1583.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.43619e-06 Jy ! Component: 100 - total flux cleaned = -3.25657e-05 Jy ! Component: 150 - total flux cleaned = -9.12242e-05 Jy ! Component: 200 - total flux cleaned = -0.000116798 Jy ! Total flux subtracted in 200 components = -0.000116798 Jy ! Clean residual min=-0.002942 max=0.002670 Jy/beam ! Clean residual mean=-0.000012 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.187927 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 114 components and 0.187927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127177Jy sigma=0.000656 ! Fit after self-cal, rms=0.127179Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.83767e-05 Jy ! Component: 100 - total flux cleaned = 0.000110048 Jy ! Component: 150 - total flux cleaned = 0.000189885 Jy ! Component: 200 - total flux cleaned = 0.000226356 Jy ! Total flux subtracted in 200 components = 0.000226356 Jy ! Clean residual min=-0.002915 max=0.002650 Jy/beam ! Clean residual mean=-0.000011 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.188153 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 120 components and 0.188153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127175Jy sigma=0.000656 ! Fit after self-cal, rms=0.127175Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=8.411 mas, bpa=-3.419 degrees ! Estimated noise=1245.16 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.19 x 8.411 at -3.419 degrees (North through East) ! Clean map min=-0.003044 max=0.13742 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.475 mas, bmaj=6.568 mas, bpa=-8.53 degrees ! Estimated noise=2605.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108072 Jy ! Component: 100 - total flux cleaned = 0.140989 Jy ! Component: 150 - total flux cleaned = 0.15772 Jy ! Component: 200 - total flux cleaned = 0.167563 Jy ! Total flux subtracted in 200 components = 0.167563 Jy ! Clean residual min=-0.007014 max=0.006878 Jy/beam ! Clean residual mean=-0.000013 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 0.167563 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.167563 Jy ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=8.411 mas, bpa=-3.419 degrees ! Estimated noise=1245.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00767563 Jy ! Component: 100 - total flux cleaned = 0.0124969 Jy ! Component: 150 - total flux cleaned = 0.0159397 Jy ! Component: 200 - total flux cleaned = 0.0174584 Jy ! Total flux subtracted in 200 components = 0.0174584 Jy ! Clean residual min=-0.003796 max=0.003247 Jy/beam ! Clean residual mean=-0.000010 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.185021 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 49 components and 0.185021 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.155 mas, bmaj=19.6 mas, bpa=-0.08333 degrees ! Estimated noise=1583.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166288 Jy ! Component: 100 - total flux cleaned = 0.00238298 Jy ! Component: 150 - total flux cleaned = 0.00250138 Jy ! Component: 200 - total flux cleaned = 0.00260585 Jy ! Total flux subtracted in 200 components = 0.00260585 Jy ! Clean residual min=-0.002949 max=0.002825 Jy/beam ! Clean residual mean=-0.000012 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.187627 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.5677e-05 Jy ! Component: 100 - total flux cleaned = 0.000228488 Jy ! Component: 150 - total flux cleaned = 0.000311797 Jy ! Component: 200 - total flux cleaned = 0.000389384 Jy ! Total flux subtracted in 200 components = 0.000389384 Jy ! Clean residual min=-0.002923 max=0.002729 Jy/beam ! Clean residual mean=-0.000011 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.188017 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 82 components and 0.188017 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=8.411 mas, bpa=-3.419 degrees ! Estimated noise=1245.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.86058e-06 Jy ! Component: 100 - total flux cleaned = -0.000136514 Jy ! Component: 150 - total flux cleaned = -0.000191698 Jy ! Component: 200 - total flux cleaned = -0.000139302 Jy ! Total flux subtracted in 200 components = -0.000139302 Jy ! Clean residual min=-0.003249 max=0.002931 Jy/beam ! Clean residual mean=-0.000005 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.187877 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 105 components and 0.187877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127249Jy sigma=0.000656 ! Fit after self-cal, rms=0.127258Jy sigma=0.000656 wmodel J1323-3038_S_2017_03_23_pus_map.mod ! Writing 105 model components to file: J1323-3038_S_2017_03_23_pus_map.mod wobs J1323-3038_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1323-3038_S_2017_03_23_pus_uvs.fits wwins J1323-3038_S_2017_03_23_pus_map.win ! wwins: Wrote 4 windows to J1323-3038_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000879834 Jy ! Component: 100 - total flux cleaned = -0.00126903 Jy ! Component: 150 - total flux cleaned = -0.00136151 Jy ! Component: 200 - total flux cleaned = -0.00140271 Jy ! Component: 250 - total flux cleaned = -0.00164762 Jy ! Component: 300 - total flux cleaned = -0.00168746 Jy ! Component: 350 - total flux cleaned = -0.00184382 Jy ! Component: 400 - total flux cleaned = -0.00191879 Jy ! Component: 450 - total flux cleaned = -0.00188093 Jy ! Component: 500 - total flux cleaned = -0.00184416 Jy ! Component: 550 - total flux cleaned = -0.00170402 Jy ! Component: 600 - total flux cleaned = -0.00167008 Jy ! Component: 650 - total flux cleaned = -0.00163578 Jy ! Component: 700 - total flux cleaned = -0.00153561 Jy ! Component: 750 - total flux cleaned = -0.00140479 Jy ! Component: 800 - total flux cleaned = -0.00137251 Jy ! Component: 850 - total flux cleaned = -0.00124554 Jy ! Component: 900 - total flux cleaned = -0.00112003 Jy ! Component: 950 - total flux cleaned = -0.000905031 Jy ! Component: 1000 - total flux cleaned = -0.000723737 Jy ! Component: 1050 - total flux cleaned = -0.000604575 Jy ! Component: 1100 - total flux cleaned = -0.000457316 Jy ! Component: 1150 - total flux cleaned = -0.000370767 Jy ! Component: 1200 - total flux cleaned = -0.000284594 Jy ! Component: 1250 - total flux cleaned = -8.65723e-05 Jy ! Component: 1300 - total flux cleaned = 2.4776e-05 Jy ! Component: 1350 - total flux cleaned = 0.000107626 Jy ! Component: 1400 - total flux cleaned = 0.000189354 Jy ! Component: 1450 - total flux cleaned = 0.00037732 Jy ! Component: 1500 - total flux cleaned = 0.000430273 Jy ! Component: 1550 - total flux cleaned = 0.00061406 Jy ! Component: 1600 - total flux cleaned = 0.000691791 Jy ! Component: 1650 - total flux cleaned = 0.000871082 Jy ! Component: 1700 - total flux cleaned = 0.000946999 Jy ! Component: 1750 - total flux cleaned = 0.00107192 Jy ! Component: 1800 - total flux cleaned = 0.00122077 Jy ! Component: 1850 - total flux cleaned = 0.00139225 Jy ! Component: 1900 - total flux cleaned = 0.00158619 Jy ! Component: 1950 - total flux cleaned = 0.00175384 Jy ! Component: 2000 - total flux cleaned = 0.00191965 Jy ! Component: 2050 - total flux cleaned = 0.00213064 Jy ! Component: 2100 - total flux cleaned = 0.00229281 Jy ! Component: 2150 - total flux cleaned = 0.00240756 Jy ! Component: 2200 - total flux cleaned = 0.00256664 Jy ! Component: 2250 - total flux cleaned = 0.00276871 Jy ! Component: 2300 - total flux cleaned = 0.00290236 Jy ! Component: 2350 - total flux cleaned = 0.00299069 Jy ! Component: 2400 - total flux cleaned = 0.00318717 Jy ! Component: 2450 - total flux cleaned = 0.00338183 Jy ! Component: 2500 - total flux cleaned = 0.00348935 Jy ! Component: 2550 - total flux cleaned = 0.00370222 Jy ! Component: 2600 - total flux cleaned = 0.00387094 Jy ! Component: 2650 - total flux cleaned = 0.00393376 Jy ! Component: 2700 - total flux cleaned = 0.00414148 Jy ! Component: 2750 - total flux cleaned = 0.00426485 Jy ! Component: 2800 - total flux cleaned = 0.00436709 Jy ! Component: 2850 - total flux cleaned = 0.00454969 Jy ! Component: 2900 - total flux cleaned = 0.00454945 Jy ! Component: 2950 - total flux cleaned = 0.00468933 Jy ! Component: 3000 - total flux cleaned = 0.00472911 Jy ! Component: 3050 - total flux cleaned = 0.00480823 Jy ! Component: 3100 - total flux cleaned = 0.00498461 Jy ! Component: 3150 - total flux cleaned = 0.00510115 Jy ! Component: 3200 - total flux cleaned = 0.00525553 Jy ! Component: 3250 - total flux cleaned = 0.0053321 Jy ! Component: 3300 - total flux cleaned = 0.00542743 Jy ! Component: 3350 - total flux cleaned = 0.00548421 Jy ! Component: 3400 - total flux cleaned = 0.005635 Jy ! Component: 3450 - total flux cleaned = 0.00574724 Jy ! Component: 3500 - total flux cleaned = 0.00578433 Jy ! Component: 3550 - total flux cleaned = 0.00589531 Jy ! Component: 3600 - total flux cleaned = 0.00596885 Jy ! Component: 3650 - total flux cleaned = 0.00604207 Jy ! Component: 3700 - total flux cleaned = 0.00616943 Jy ! Component: 3750 - total flux cleaned = 0.00631397 Jy ! Component: 3800 - total flux cleaned = 0.00633191 Jy ! Component: 3850 - total flux cleaned = 0.00643913 Jy ! Component: 3900 - total flux cleaned = 0.00654574 Jy ! Component: 3950 - total flux cleaned = 0.00659884 Jy ! Component: 4000 - total flux cleaned = 0.00668672 Jy ! Component: 4050 - total flux cleaned = 0.00677434 Jy ! Total flux subtracted in 4096 components = 0.00684388 Jy ! Clean residual min=-0.001383 max=0.001033 Jy/beam ! Clean residual mean=-0.000000 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.194721 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 363 components and 0.194721 Jy ![Exited script file: muppet] wmap "J1323-3038_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.19 x 8.411 at -3.419 degrees (North through East) ! Clean map min=-0.0026186 max=0.13854 Jy/beam ! Writing clean map to FITS file: J1323-3038_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13854 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000306702 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.664142 0.664142 1.32828 2.65657 5.31314 10.6263 21.2526 42.5051 85.0102 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.138 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.19 x 8.411 at -3.419 degrees (North through East) ! Clean map min=-0.0026186 max=0.13854 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1323-3038_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:00:39 2019