! Started logfile: J1323+7942_S_2017_05_27_pus_uvs.log on Fri May 3 11:08:35 2019 obs J1323+7942_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1323+7942_S_2017_05_27_pus_uva.fits ! AN table 1: 151 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969095 visibilities/baseline/integration-bin. ! Found source: J1323+7942 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 26340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1323+7942_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 785 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.676630Jy sigma=0.020231 ! Fit after self-cal, rms=0.647949Jy sigma=0.020156 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=3.696 mas, bpa=-80.9 degrees ! Estimated noise=932.674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.231828 Jy ! Component: 100 - total flux cleaned = 0.295882 Jy ! Total flux subtracted in 100 components = 0.295882 Jy ! Clean residual min=-0.032679 max=0.041399 Jy/beam ! Clean residual mean=-0.000251 rms=0.010775 Jy/beam ! Combined flux in latest and established models = 0.295881 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.295881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160117Jy sigma=0.005740 ! Fit after self-cal, rms=0.160130Jy sigma=0.005739 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.15 mas, bmaj=4.467 mas, bpa=-81.49 degrees ! Estimated noise=536.652 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0409416 Jy ! Component: 100 - total flux cleaned = 0.0593881 Jy ! Component: 150 - total flux cleaned = 0.0652143 Jy ! Component: 200 - total flux cleaned = 0.0669832 Jy ! Total flux subtracted in 200 components = 0.0669832 Jy ! Clean residual min=-0.034163 max=0.052442 Jy/beam ! Clean residual mean=-0.000224 rms=0.011898 Jy/beam ! Combined flux in latest and established models = 0.362865 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 0.362865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131958Jy sigma=0.006624 ! Fit after self-cal, rms=0.131504Jy sigma=0.006624 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.85 HN 0.95 KP 36.36 ! LA 0.88 MK 1.00 NL 0.80 OV 0.91 ! PT 0.94 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.89 HN 1.01 KP 0.84 ! LA 0.83 MK 0.97 NL 0.93 OV 1.04 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.91 HN 1.00 KP 0.87 ! LA 0.87 MK 1.03 NL 0.89 OV 0.86 ! PT 0.89 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.04 KP 1.00* ! LA 0.97 MK 0.94 NL 1.00* OV 1.00* ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.131504Jy sigma=0.006624 ! Fit after self-cal, rms=3.126882Jy sigma=0.001065 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.137 mas, bmaj=4.323 mas, bpa=-51.91 degrees ! Estimated noise=557.697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252671 Jy ! Component: 100 - total flux cleaned = 0.0369188 Jy ! Component: 150 - total flux cleaned = 0.0431469 Jy ! Component: 200 - total flux cleaned = 0.0454552 Jy ! Total flux subtracted in 200 components = 0.0454552 Jy ! Clean residual min=-0.011139 max=0.008009 Jy/beam ! Clean residual mean=0.000034 rms=0.002470 Jy/beam ! Combined flux in latest and established models = 0.40832 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 50 components and 0.40832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.120903Jy sigma=0.001063 ! Fit after self-cal, rms=3.121011Jy sigma=0.001027 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.121011Jy sigma=0.001027 ! Fit after self-cal, rms=1.740432Jy sigma=0.000747 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.114 mas, bmaj=4.319 mas, bpa=-61.28 degrees ! Estimated noise=560.197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00689629 Jy ! Component: 100 - total flux cleaned = 0.00838273 Jy ! Component: 150 - total flux cleaned = 0.00895154 Jy ! Component: 200 - total flux cleaned = 0.00914854 Jy ! Total flux subtracted in 200 components = 0.00914854 Jy ! Clean residual min=-0.004915 max=0.003585 Jy/beam ! Clean residual mean=0.000019 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.417468 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.417468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.739794Jy sigma=0.000744 ! Fit after self-cal, rms=1.739781Jy sigma=0.000743 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000920905 Jy ! Component: 100 - total flux cleaned = 0.00108955 Jy ! Component: 150 - total flux cleaned = 0.00129645 Jy ! Component: 200 - total flux cleaned = 0.00147946 Jy ! Total flux subtracted in 200 components = 0.00147946 Jy ! Clean residual min=-0.004939 max=0.003351 Jy/beam ! Clean residual mean=0.000019 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.418948 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.418948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.739628Jy sigma=0.000742 ! Fit after self-cal, rms=1.739627Jy sigma=0.000742 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.739627Jy sigma=0.000742 ! Fit after self-cal, rms=1.782370Jy sigma=0.000740 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.096 mas, bmaj=4.299 mas, bpa=-54.67 degrees ! Estimated noise=564.667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496808 Jy ! Component: 100 - total flux cleaned = 0.00753835 Jy ! Component: 150 - total flux cleaned = 0.00842613 Jy ! Component: 200 - total flux cleaned = 0.00878937 Jy ! Total flux subtracted in 200 components = 0.00878937 Jy ! Clean residual min=-0.004628 max=0.003349 Jy/beam ! Clean residual mean=0.000019 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.427737 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 0.427737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.781786Jy sigma=0.000740 ! Fit after self-cal, rms=1.781781Jy sigma=0.000740 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000529474 Jy ! Component: 100 - total flux cleaned = 0.000732877 Jy ! Component: 150 - total flux cleaned = 0.000818768 Jy ! Component: 200 - total flux cleaned = 0.000820042 Jy ! Total flux subtracted in 200 components = 0.000820042 Jy ! Clean residual min=-0.004641 max=0.003217 Jy/beam ! Clean residual mean=0.000019 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.428557 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 84 components and 0.428557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.781695Jy sigma=0.000740 ! Fit after self-cal, rms=1.781695Jy sigma=0.000740 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.781695Jy sigma=0.000740 ! Fit after self-cal, rms=1.815562Jy sigma=0.000738 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.753 mas, bmaj=9.051 mas, bpa=-53.54 degrees ! Estimated noise=716.487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00535236 Jy ! Component: 100 - total flux cleaned = 0.00775879 Jy ! Component: 150 - total flux cleaned = 0.00908173 Jy ! Component: 200 - total flux cleaned = 0.00982257 Jy ! Total flux subtracted in 200 components = 0.00982257 Jy ! Clean residual min=-0.006005 max=0.004233 Jy/beam ! Clean residual mean=0.000042 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 0.43838 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 104 components and 0.43838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.814951Jy sigma=0.000740 ! Fit after self-cal, rms=1.814951Jy sigma=0.000740 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000530015 Jy ! Component: 100 - total flux cleaned = 0.000598302 Jy ! Component: 150 - total flux cleaned = 0.000653151 Jy ! Component: 200 - total flux cleaned = 0.000699732 Jy ! Total flux subtracted in 200 components = 0.000699732 Jy ! Clean residual min=-0.006024 max=0.004128 Jy/beam ! Clean residual mean=0.000042 rms=0.001597 Jy/beam ! Combined flux in latest and established models = 0.43908 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 114 components and 0.43908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.814908Jy sigma=0.000740 ! Fit after self-cal, rms=1.814906Jy sigma=0.000740 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.079 mas, bmaj=4.285 mas, bpa=-49.83 degrees ! Estimated noise=569.717 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.079 x 4.285 at -49.83 degrees (North through East) ! Clean map min=-0.0042744 max=0.3169 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=3.516 mas, bpa=-70.08 degrees ! Estimated noise=983.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.249667 Jy ! Component: 100 - total flux cleaned = 0.329551 Jy ! Component: 150 - total flux cleaned = 0.366029 Jy ! Component: 200 - total flux cleaned = 0.387542 Jy ! Total flux subtracted in 200 components = 0.387542 Jy ! Clean residual min=-0.005308 max=0.011186 Jy/beam ! Clean residual mean=0.000021 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.387542 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.387542 Jy ! Inverting map and beam ! Estimated beam: bmin=4.079 mas, bmaj=4.285 mas, bpa=-49.83 degrees ! Estimated noise=569.717 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189742 Jy ! Component: 100 - total flux cleaned = 0.0294796 Jy ! Component: 150 - total flux cleaned = 0.0360383 Jy ! Component: 200 - total flux cleaned = 0.0404481 Jy ! Total flux subtracted in 200 components = 0.0404481 Jy ! Clean residual min=-0.004109 max=0.003545 Jy/beam ! Clean residual mean=0.000020 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.42799 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 70 components and 0.42799 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.753 mas, bmaj=9.051 mas, bpa=-53.54 degrees ! Estimated noise=716.487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00506103 Jy ! Component: 100 - total flux cleaned = 0.00780243 Jy ! Component: 150 - total flux cleaned = 0.00938858 Jy ! Component: 200 - total flux cleaned = 0.0103157 Jy ! Total flux subtracted in 200 components = 0.0103157 Jy ! Clean residual min=-0.006045 max=0.004131 Jy/beam ! Clean residual mean=0.000042 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.438306 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000544615 Jy ! Component: 100 - total flux cleaned = 0.000637283 Jy ! Component: 150 - total flux cleaned = 0.000665361 Jy ! Component: 200 - total flux cleaned = 0.000691648 Jy ! Total flux subtracted in 200 components = 0.000691648 Jy ! Clean residual min=-0.006107 max=0.004143 Jy/beam ! Clean residual mean=0.000042 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.438997 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 101 components and 0.438997 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.079 mas, bmaj=4.285 mas, bpa=-49.83 degrees ! Estimated noise=569.717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000279569 Jy ! Component: 100 - total flux cleaned = -0.000429918 Jy ! Component: 150 - total flux cleaned = -0.000474298 Jy ! Component: 200 - total flux cleaned = -0.000592389 Jy ! Total flux subtracted in 200 components = -0.000592389 Jy ! Clean residual min=-0.004303 max=0.003084 Jy/beam ! Clean residual mean=0.000020 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.438405 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 113 components and 0.438405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.814858Jy sigma=0.000739 ! Fit after self-cal, rms=1.814857Jy sigma=0.000739 wmodel J1323+7942_S_2017_05_27_pus_map.mod ! Writing 113 model components to file: J1323+7942_S_2017_05_27_pus_map.mod wobs J1323+7942_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1323+7942_S_2017_05_27_pus_uvs.fits wwins J1323+7942_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1323+7942_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00193715 Jy ! Component: 100 - total flux cleaned = -0.00366236 Jy ! Component: 150 - total flux cleaned = -0.00474139 Jy ! Component: 200 - total flux cleaned = -0.00522494 Jy ! Component: 250 - total flux cleaned = -0.00540098 Jy ! Component: 300 - total flux cleaned = -0.00551554 Jy ! Component: 350 - total flux cleaned = -0.00579468 Jy ! Component: 400 - total flux cleaned = -0.00612316 Jy ! Component: 450 - total flux cleaned = -0.00639217 Jy ! Component: 500 - total flux cleaned = -0.00670936 Jy ! Component: 550 - total flux cleaned = -0.00691738 Jy ! Component: 600 - total flux cleaned = -0.00707179 Jy ! Component: 650 - total flux cleaned = -0.00737576 Jy ! Component: 700 - total flux cleaned = -0.00762523 Jy ! Component: 750 - total flux cleaned = -0.00757535 Jy ! Component: 800 - total flux cleaned = -0.00762439 Jy ! Component: 850 - total flux cleaned = -0.00762413 Jy ! Component: 900 - total flux cleaned = -0.00762418 Jy ! Component: 950 - total flux cleaned = -0.00767084 Jy ! Component: 1000 - total flux cleaned = -0.00767069 Jy ! Component: 1050 - total flux cleaned = -0.00762426 Jy ! Component: 1100 - total flux cleaned = -0.00757863 Jy ! Component: 1150 - total flux cleaned = -0.00757895 Jy ! Component: 1200 - total flux cleaned = -0.00748954 Jy ! Component: 1250 - total flux cleaned = -0.00753393 Jy ! Component: 1300 - total flux cleaned = -0.00744615 Jy ! Component: 1350 - total flux cleaned = -0.00744609 Jy ! Component: 1400 - total flux cleaned = -0.00740286 Jy ! Component: 1450 - total flux cleaned = -0.00740267 Jy ! Component: 1500 - total flux cleaned = -0.0073598 Jy ! Component: 1550 - total flux cleaned = -0.00735967 Jy ! Component: 1600 - total flux cleaned = -0.00740165 Jy ! Component: 1650 - total flux cleaned = -0.00731764 Jy ! Component: 1700 - total flux cleaned = -0.00719297 Jy ! Component: 1750 - total flux cleaned = -0.0071107 Jy ! Component: 1800 - total flux cleaned = -0.00706951 Jy ! Component: 1850 - total flux cleaned = -0.00698808 Jy ! Component: 1900 - total flux cleaned = -0.00686673 Jy ! Component: 1950 - total flux cleaned = -0.00678634 Jy ! Component: 2000 - total flux cleaned = -0.00666623 Jy ! Component: 2050 - total flux cleaned = -0.00654704 Jy ! Component: 2100 - total flux cleaned = -0.00646793 Jy ! Component: 2150 - total flux cleaned = -0.0062323 Jy ! Component: 2200 - total flux cleaned = -0.005998 Jy ! Component: 2250 - total flux cleaned = -0.00584293 Jy ! Component: 2300 - total flux cleaned = -0.00565017 Jy ! Component: 2350 - total flux cleaned = -0.00561186 Jy ! Component: 2400 - total flux cleaned = -0.00542068 Jy ! Component: 2450 - total flux cleaned = -0.00538248 Jy ! Component: 2500 - total flux cleaned = -0.00523102 Jy ! Component: 2550 - total flux cleaned = -0.00508034 Jy ! Component: 2600 - total flux cleaned = -0.00489328 Jy ! Component: 2650 - total flux cleaned = -0.00478166 Jy ! Component: 2700 - total flux cleaned = -0.00478147 Jy ! Component: 2750 - total flux cleaned = -0.00459715 Jy ! Component: 2800 - total flux cleaned = -0.00445039 Jy ! Component: 2850 - total flux cleaned = -0.00434094 Jy ! Component: 2900 - total flux cleaned = -0.00426825 Jy ! Component: 2950 - total flux cleaned = -0.00412355 Jy ! Component: 3000 - total flux cleaned = -0.00397981 Jy ! Component: 3050 - total flux cleaned = -0.00394385 Jy ! Component: 3100 - total flux cleaned = -0.00380114 Jy ! Component: 3150 - total flux cleaned = -0.00373006 Jy ! Component: 3200 - total flux cleaned = -0.00365923 Jy ! Component: 3250 - total flux cleaned = -0.00344813 Jy ! Component: 3300 - total flux cleaned = -0.00341345 Jy ! Component: 3350 - total flux cleaned = -0.00337859 Jy ! Component: 3400 - total flux cleaned = -0.00330938 Jy ! Component: 3450 - total flux cleaned = -0.00320593 Jy ! Component: 3500 - total flux cleaned = -0.00320609 Jy ! Component: 3550 - total flux cleaned = -0.0031375 Jy ! Component: 3600 - total flux cleaned = -0.00313767 Jy ! Component: 3650 - total flux cleaned = -0.0030696 Jy ! Component: 3700 - total flux cleaned = -0.00300185 Jy ! Component: 3750 - total flux cleaned = -0.00293452 Jy ! Component: 3800 - total flux cleaned = -0.00293481 Jy ! Component: 3850 - total flux cleaned = -0.00283459 Jy ! Component: 3900 - total flux cleaned = -0.00276791 Jy ! Component: 3950 - total flux cleaned = -0.00280083 Jy ! Component: 4000 - total flux cleaned = -0.00270173 Jy ! Component: 4050 - total flux cleaned = -0.00266898 Jy ! Total flux subtracted in 4096 components = -0.00260358 Jy ! Clean residual min=-0.002143 max=0.001696 Jy/beam ! Clean residual mean=0.000012 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.435802 Jy keep ! Adding 356 model components to the UV plane model. ! The established model now contains 469 components and 0.435802 Jy ![Exited script file: muppet] wmap "J1323+7942_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.079 x 4.285 at -49.83 degrees (North through East) ! Clean map min=-0.003583 max=0.31902 Jy/beam ! Writing clean map to FITS file: J1323+7942_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.319023 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000642152 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.603861 0.603861 1.20772 2.41545 4.83089 9.66178 19.3236 38.6471 77.2942 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.319 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.079 x 4.285 at -49.83 degrees (North through East) ! Clean map min=-0.003583 max=0.31902 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1323+7942_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:08:39 2019