! Started logfile: J1321-2636_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:50:01 2019 obs J1321-2636_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1321-2636_S_2017_05_31_pus_uva.fits ! AN table 1: 165 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.571717 visibilities/baseline/integration-bin. ! Found source: J1321-2636 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 16980 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1321-2636_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 592 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 717 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 717 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1082 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.113355Jy sigma=0.005220 ! Fit after self-cal, rms=1.072150Jy sigma=0.005104 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=6.344 mas, bpa=-7.112 degrees ! Estimated noise=2144.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186732 Jy ! Component: 100 - total flux cleaned = 0.241407 Jy ! Total flux subtracted in 100 components = 0.241407 Jy ! Clean residual min=-0.016846 max=0.026535 Jy/beam ! Clean residual mean=-0.000039 rms=0.004787 Jy/beam ! Combined flux in latest and established models = 0.241407 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.241407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.835079Jy sigma=0.000778 ! Fit after self-cal, rms=0.835079Jy sigma=0.000778 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.768 mas, bpa=-3.885 degrees ! Estimated noise=1021.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344832 Jy ! Component: 100 - total flux cleaned = 0.0537936 Jy ! Component: 150 - total flux cleaned = 0.0651526 Jy ! Component: 200 - total flux cleaned = 0.0691725 Jy ! Total flux subtracted in 200 components = 0.0691725 Jy ! Clean residual min=-0.010148 max=0.010409 Jy/beam ! Clean residual mean=-0.000043 rms=0.002706 Jy/beam ! Combined flux in latest and established models = 0.31058 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 69 components and 0.31058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.829013Jy sigma=0.000727 ! Fit after self-cal, rms=0.828995Jy sigma=0.000726 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.37 FD 0.97 HN 1.29 KP 1.04 ! LA 1.01 MK 0.97 NL 0.91 OV 1.02 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.22 KP 1.00 ! LA 0.98 MK 1.00 NL 1.04 OV 1.03 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.15 KP 1.00 ! LA 0.99 MK 1.03 NL 0.99 OV 0.96 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00 KP 0.96 ! LA 0.75 MK 1.19 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.828995Jy sigma=0.000726 ! Fit after self-cal, rms=0.580377Jy sigma=0.000683 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=7.789 mas, bpa=-3.378 degrees ! Estimated noise=1025.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174094 Jy ! Component: 100 - total flux cleaned = 0.00229916 Jy ! Component: 150 - total flux cleaned = 0.0025331 Jy ! Component: 200 - total flux cleaned = 0.00263776 Jy ! Total flux subtracted in 200 components = 0.00263776 Jy ! Clean residual min=-0.005320 max=0.007102 Jy/beam ! Clean residual mean=-0.000007 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 0.313218 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.313218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.580243Jy sigma=0.000682 ! Fit after self-cal, rms=0.580160Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.580160Jy sigma=0.000681 ! Fit after self-cal, rms=0.542656Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.769 mas, bpa=-3.717 degrees ! Estimated noise=1033.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188322 Jy ! Component: 100 - total flux cleaned = 0.00253622 Jy ! Component: 150 - total flux cleaned = 0.00287302 Jy ! Component: 200 - total flux cleaned = 0.00310384 Jy ! Total flux subtracted in 200 components = 0.00310384 Jy ! Clean residual min=-0.004049 max=0.004761 Jy/beam ! Clean residual mean=-0.000001 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.316321 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.316321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.542483Jy sigma=0.000674 ! Fit after self-cal, rms=0.542525Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181207 Jy ! Component: 100 - total flux cleaned = 0.000281989 Jy ! Component: 150 - total flux cleaned = 0.000371228 Jy ! Component: 200 - total flux cleaned = 0.000453777 Jy ! Total flux subtracted in 200 components = 0.000453777 Jy ! Clean residual min=-0.003964 max=0.004774 Jy/beam ! Clean residual mean=-0.000001 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.316775 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 115 components and 0.316775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.542501Jy sigma=0.000674 ! Fit after self-cal, rms=0.542500Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.542500Jy sigma=0.000674 ! Fit after self-cal, rms=0.230801Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=7.757 mas, bpa=-3.841 degrees ! Estimated noise=1036.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369549 Jy ! Component: 100 - total flux cleaned = 0.000572504 Jy ! Component: 150 - total flux cleaned = 0.000780568 Jy ! Component: 200 - total flux cleaned = 0.0009269 Jy ! Total flux subtracted in 200 components = 0.0009269 Jy ! Clean residual min=-0.003570 max=0.003384 Jy/beam ! Clean residual mean=0.000005 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.317702 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 122 components and 0.317702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230746Jy sigma=0.000669 ! Fit after self-cal, rms=0.230676Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.1603e-06 Jy ! Component: 100 - total flux cleaned = -5.44445e-06 Jy ! Component: 150 - total flux cleaned = -4.59276e-06 Jy ! Component: 200 - total flux cleaned = 2.5583e-05 Jy ! Total flux subtracted in 200 components = 2.5583e-05 Jy ! Clean residual min=-0.003465 max=0.003328 Jy/beam ! Clean residual mean=0.000004 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.317728 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 131 components and 0.317728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230664Jy sigma=0.000669 ! Fit after self-cal, rms=0.230660Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230660Jy sigma=0.000669 ! Fit after self-cal, rms=0.229269Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.623 mas, bmaj=19.11 mas, bpa=-1.504 degrees ! Estimated noise=1275.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140476 Jy ! Component: 100 - total flux cleaned = 0.00157399 Jy ! Component: 150 - total flux cleaned = 0.00169934 Jy ! Component: 200 - total flux cleaned = 0.00172001 Jy ! Total flux subtracted in 200 components = 0.00172001 Jy ! Clean residual min=-0.003327 max=0.003593 Jy/beam ! Clean residual mean=0.000004 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.319448 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 146 components and 0.319448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229223Jy sigma=0.000669 ! Fit after self-cal, rms=0.229215Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031683 Jy ! Component: 100 - total flux cleaned = 0.000287205 Jy ! Component: 150 - total flux cleaned = 0.000310787 Jy ! Component: 200 - total flux cleaned = 0.00033177 Jy ! Total flux subtracted in 200 components = 0.00033177 Jy ! Clean residual min=-0.003241 max=0.003627 Jy/beam ! Clean residual mean=0.000004 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.319779 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 151 components and 0.319779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229212Jy sigma=0.000669 ! Fit after self-cal, rms=0.229206Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=7.744 mas, bpa=-3.846 degrees ! Estimated noise=1038.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.308 x 7.744 at -3.846 degrees (North through East) ! Clean map min=-0.0033505 max=0.23363 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=6.387 mas, bpa=-6.834 degrees ! Estimated noise=2109.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.182877 Jy ! Component: 100 - total flux cleaned = 0.234487 Jy ! Component: 150 - total flux cleaned = 0.261605 Jy ! Component: 200 - total flux cleaned = 0.278675 Jy ! Total flux subtracted in 200 components = 0.278675 Jy ! Clean residual min=-0.007008 max=0.009391 Jy/beam ! Clean residual mean=0.000004 rms=0.001907 Jy/beam ! Combined flux in latest and established models = 0.278675 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.278675 Jy ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=7.744 mas, bpa=-3.846 degrees ! Estimated noise=1038.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163918 Jy ! Component: 100 - total flux cleaned = 0.025158 Jy ! Component: 150 - total flux cleaned = 0.0305051 Jy ! Component: 200 - total flux cleaned = 0.0338744 Jy ! Total flux subtracted in 200 components = 0.0338744 Jy ! Clean residual min=-0.003292 max=0.003507 Jy/beam ! Clean residual mean=0.000005 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.31255 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 104 components and 0.31255 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.623 mas, bmaj=19.11 mas, bpa=-1.504 degrees ! Estimated noise=1275.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035209 Jy ! Component: 100 - total flux cleaned = 0.00519134 Jy ! Component: 150 - total flux cleaned = 0.00605811 Jy ! Component: 200 - total flux cleaned = 0.00621683 Jy ! Total flux subtracted in 200 components = 0.00621683 Jy ! Clean residual min=-0.003403 max=0.003743 Jy/beam ! Clean residual mean=0.000002 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.318767 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.82726e-05 Jy ! Component: 100 - total flux cleaned = 0.000168484 Jy ! Component: 150 - total flux cleaned = 0.000216613 Jy ! Component: 200 - total flux cleaned = 0.000262414 Jy ! Total flux subtracted in 200 components = 0.000262414 Jy ! Clean residual min=-0.003412 max=0.003742 Jy/beam ! Clean residual mean=0.000002 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.319029 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 124 components and 0.319029 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=7.744 mas, bpa=-3.846 degrees ! Estimated noise=1038.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00067685 Jy ! Component: 100 - total flux cleaned = -0.00074544 Jy ! Component: 150 - total flux cleaned = -0.000776899 Jy ! Component: 200 - total flux cleaned = -0.000751595 Jy ! Total flux subtracted in 200 components = -0.000751595 Jy ! Clean residual min=-0.003082 max=0.003321 Jy/beam ! Clean residual mean=0.000003 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.318278 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 142 components and 0.318278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229211Jy sigma=0.000668 ! Fit after self-cal, rms=0.229182Jy sigma=0.000668 wmodel J1321-2636_S_2017_05_31_pus_map.mod ! Writing 142 model components to file: J1321-2636_S_2017_05_31_pus_map.mod wobs J1321-2636_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1321-2636_S_2017_05_31_pus_uvs.fits wwins J1321-2636_S_2017_05_31_pus_map.win ! wwins: Wrote 2 windows to J1321-2636_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000899627 Jy ! Component: 100 - total flux cleaned = 0.00189324 Jy ! Component: 150 - total flux cleaned = 0.00272435 Jy ! Component: 200 - total flux cleaned = 0.00309531 Jy ! Component: 250 - total flux cleaned = 0.00349299 Jy ! Component: 300 - total flux cleaned = 0.00382978 Jy ! Component: 350 - total flux cleaned = 0.00411127 Jy ! Component: 400 - total flux cleaned = 0.0043454 Jy ! Component: 450 - total flux cleaned = 0.00457278 Jy ! Component: 500 - total flux cleaned = 0.004867 Jy ! Component: 550 - total flux cleaned = 0.00515243 Jy ! Component: 600 - total flux cleaned = 0.00539486 Jy ! Component: 650 - total flux cleaned = 0.00546309 Jy ! Component: 700 - total flux cleaned = 0.00566319 Jy ! Component: 750 - total flux cleaned = 0.00579376 Jy ! Component: 800 - total flux cleaned = 0.0060163 Jy ! Component: 850 - total flux cleaned = 0.00614046 Jy ! Component: 900 - total flux cleaned = 0.00620139 Jy ! Component: 950 - total flux cleaned = 0.00635096 Jy ! Component: 1000 - total flux cleaned = 0.00646834 Jy ! Component: 1050 - total flux cleaned = 0.00655501 Jy ! Component: 1100 - total flux cleaned = 0.0068102 Jy ! Component: 1150 - total flux cleaned = 0.00694945 Jy ! Component: 1200 - total flux cleaned = 0.0071409 Jy ! Component: 1250 - total flux cleaned = 0.00730243 Jy ! Component: 1300 - total flux cleaned = 0.00751417 Jy ! Component: 1350 - total flux cleaned = 0.00774807 Jy ! Component: 1400 - total flux cleaned = 0.00777387 Jy ! Component: 1450 - total flux cleaned = 0.00795119 Jy ! Component: 1500 - total flux cleaned = 0.0081007 Jy ! Component: 1550 - total flux cleaned = 0.00827256 Jy ! Component: 1600 - total flux cleaned = 0.00839352 Jy ! Component: 1650 - total flux cleaned = 0.00844153 Jy ! Component: 1700 - total flux cleaned = 0.00858349 Jy ! Component: 1750 - total flux cleaned = 0.00869998 Jy ! Component: 1800 - total flux cleaned = 0.00881529 Jy ! Component: 1850 - total flux cleaned = 0.0088834 Jy ! Component: 1900 - total flux cleaned = 0.00906319 Jy ! Component: 1950 - total flux cleaned = 0.00919619 Jy ! Component: 2000 - total flux cleaned = 0.00930596 Jy ! Component: 2050 - total flux cleaned = 0.00950086 Jy ! Component: 2100 - total flux cleaned = 0.00960779 Jy ! Component: 2150 - total flux cleaned = 0.0097559 Jy ! Component: 2200 - total flux cleaned = 0.00992343 Jy ! Component: 2250 - total flux cleaned = 0.0100894 Jy ! Component: 2300 - total flux cleaned = 0.0103353 Jy ! Component: 2350 - total flux cleaned = 0.0104364 Jy ! Component: 2400 - total flux cleaned = 0.0105974 Jy ! Component: 2450 - total flux cleaned = 0.0107172 Jy ! Component: 2500 - total flux cleaned = 0.0109344 Jy ! Component: 2550 - total flux cleaned = 0.0110713 Jy ! Component: 2600 - total flux cleaned = 0.0111681 Jy ! Component: 2650 - total flux cleaned = 0.0113028 Jy ! Component: 2700 - total flux cleaned = 0.0114747 Jy ! Component: 2750 - total flux cleaned = 0.0116447 Jy ! Component: 2800 - total flux cleaned = 0.0117385 Jy ! Component: 2850 - total flux cleaned = 0.0119436 Jy ! Component: 2900 - total flux cleaned = 0.01211 Jy ! Component: 2950 - total flux cleaned = 0.0122753 Jy ! Component: 3000 - total flux cleaned = 0.0124576 Jy ! Component: 3050 - total flux cleaned = 0.0126567 Jy ! Component: 3100 - total flux cleaned = 0.0128186 Jy ! Component: 3150 - total flux cleaned = 0.0129438 Jy ! Component: 3200 - total flux cleaned = 0.0131037 Jy ! Component: 3250 - total flux cleaned = 0.0132096 Jy ! Component: 3300 - total flux cleaned = 0.0133851 Jy ! Component: 3350 - total flux cleaned = 0.0134896 Jy ! Component: 3400 - total flux cleaned = 0.0136108 Jy ! Component: 3450 - total flux cleaned = 0.0136971 Jy ! Component: 3500 - total flux cleaned = 0.0138514 Jy ! Component: 3550 - total flux cleaned = 0.0139707 Jy ! Component: 3600 - total flux cleaned = 0.0140725 Jy ! Component: 3650 - total flux cleaned = 0.0141739 Jy ! Component: 3700 - total flux cleaned = 0.0142243 Jy ! Component: 3750 - total flux cleaned = 0.0143748 Jy ! Component: 3800 - total flux cleaned = 0.014458 Jy ! Component: 3850 - total flux cleaned = 0.0145243 Jy ! Component: 3900 - total flux cleaned = 0.0146068 Jy ! Component: 3950 - total flux cleaned = 0.0147383 Jy ! Component: 4000 - total flux cleaned = 0.0148036 Jy ! Component: 4050 - total flux cleaned = 0.0148852 Jy ! Total flux subtracted in 4096 components = 0.0149988 Jy ! Clean residual min=-0.001009 max=0.000913 Jy/beam ! Clean residual mean=0.000003 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.333276 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 425 components and 0.333276 Jy ![Exited script file: muppet] wmap "J1321-2636_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.308 x 7.744 at -3.846 degrees (North through East) ! Clean map min=-0.0018537 max=0.2355 Jy/beam ! Writing clean map to FITS file: J1321-2636_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.235505 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000292215 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.37224 0.37224 0.744481 1.48896 2.97792 5.95585 11.9117 23.8234 47.6468 95.2936 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.235 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.308 x 7.744 at -3.846 degrees (North through East) ! Clean map min=-0.0018537 max=0.2355 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1321-2636_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:50:06 2019