! Started logfile: J1320+8450_X_2017_06_15_pus_uvs.log on Tue May 7 19:56:28 2019 obs J1320+8450_X_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1320+8450_X_2017_06_15_pus_uva.fits ! AN table 1: 291 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.964872 visibilities/baseline/integration-bin. ! Found source: J1320+8450 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 989 lines of history. ! ! Reading 151620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1320+8450_X_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.951317Jy sigma=0.007871 ! Fit after self-cal, rms=0.923969Jy sigma=0.007647 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.7254 mas, bmaj=0.9872 mas, bpa=35.56 degrees ! Estimated noise=681.381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.050545 Jy ! Component: 100 - total flux cleaned = 0.0681403 Jy ! Total flux subtracted in 100 components = 0.0681403 Jy ! Clean residual min=-0.006229 max=0.024877 Jy/beam ! Clean residual mean=-0.000010 rms=0.002059 Jy/beam ! Combined flux in latest and established models = 0.0681403 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0681403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105173Jy sigma=0.000874 ! Fit after self-cal, rms=0.104931Jy sigma=0.000872 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Added new window around map position (-2.2, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210964 Jy ! Component: 100 - total flux cleaned = 0.0323136 Jy ! Total flux subtracted in 100 components = 0.0323136 Jy ! Clean residual min=-0.005490 max=0.019090 Jy/beam ! Clean residual mean=-0.000008 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 0.100454 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.100454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097588Jy sigma=0.000804 ! Fit after self-cal, rms=0.096296Jy sigma=0.000792 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152927 Jy ! Component: 100 - total flux cleaned = 0.0232605 Jy ! Total flux subtracted in 100 components = 0.0232605 Jy ! Clean residual min=-0.005558 max=0.014799 Jy/beam ! Clean residual mean=-0.000007 rms=0.001395 Jy/beam ! Combined flux in latest and established models = 0.123714 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.123714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092018Jy sigma=0.000752 ! Fit after self-cal, rms=0.091487Jy sigma=0.000747 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Added new window around map position (1.6, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142498 Jy ! Component: 100 - total flux cleaned = 0.0239922 Jy ! Total flux subtracted in 100 components = 0.0239922 Jy ! Clean residual min=-0.004578 max=0.007773 Jy/beam ! Clean residual mean=-0.000005 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.147707 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 0.147707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087400Jy sigma=0.000708 ! Fit after self-cal, rms=0.087091Jy sigma=0.000706 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00937843 Jy ! Component: 100 - total flux cleaned = 0.0159866 Jy ! Total flux subtracted in 100 components = 0.0159866 Jy ! Clean residual min=-0.003818 max=0.006518 Jy/beam ! Clean residual mean=-0.000004 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.163693 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.163693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085100Jy sigma=0.000687 ! Fit after self-cal, rms=0.084963Jy sigma=0.000686 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Added new window around map position (3.4, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.007348 Jy ! Component: 100 - total flux cleaned = 0.0121568 Jy ! Total flux subtracted in 100 components = 0.0121568 Jy ! Clean residual min=-0.003284 max=0.004994 Jy/beam ! Clean residual mean=-0.000004 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.17585 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.17585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083760Jy sigma=0.000674 ! Fit after self-cal, rms=0.083656Jy sigma=0.000674 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Added new window around map position (3, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479697 Jy ! Component: 100 - total flux cleaned = 0.00812516 Jy ! Total flux subtracted in 100 components = 0.00812516 Jy ! Clean residual min=-0.002855 max=0.004106 Jy/beam ! Clean residual mean=-0.000003 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.183975 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.183975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082978Jy sigma=0.000667 ! Fit after self-cal, rms=0.082911Jy sigma=0.000667 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9563 mas, bmaj=1.273 mas, bpa=35.32 degrees ! Estimated noise=222.352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00848514 Jy ! Component: 100 - total flux cleaned = 0.0143087 Jy ! Component: 150 - total flux cleaned = 0.0187139 Jy ! Component: 200 - total flux cleaned = 0.0220911 Jy ! Total flux subtracted in 200 components = 0.0220911 Jy ! Clean residual min=-0.002091 max=0.004226 Jy/beam ! Clean residual mean=-0.000016 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.206066 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 106 components and 0.206066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081869Jy sigma=0.000657 ! Fit after self-cal, rms=0.081752Jy sigma=0.000656 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Added new window around map position (2.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384379 Jy ! Component: 100 - total flux cleaned = 0.00527463 Jy ! Component: 150 - total flux cleaned = 0.00662918 Jy ! Component: 200 - total flux cleaned = 0.00769242 Jy ! Total flux subtracted in 200 components = 0.00769242 Jy ! Clean residual min=-0.001601 max=0.002952 Jy/beam ! Clean residual mean=-0.000007 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.213759 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 130 components and 0.213759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081500Jy sigma=0.000653 ! Fit after self-cal, rms=0.081450Jy sigma=0.000653 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Added new window around map position (-0.2, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199031 Jy ! Component: 100 - total flux cleaned = 0.00308216 Jy ! Component: 150 - total flux cleaned = 0.00398863 Jy ! Component: 200 - total flux cleaned = 0.00476918 Jy ! Total flux subtracted in 200 components = 0.00476918 Jy ! Clean residual min=-0.001335 max=0.002126 Jy/beam ! Clean residual mean=-0.000002 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.218528 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 147 components and 0.218528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081326Jy sigma=0.000652 ! Fit after self-cal, rms=0.081310Jy sigma=0.000652 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 1.01 KP 1.00 ! LA 0.95 MK 0.96 NL 1.12 OV 0.97 ! PT 1.00 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.18 KP 0.94 ! LA 0.94 MK 0.97 NL 1.04 OV 1.01 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.14 KP 0.96 ! LA 1.00 MK 0.99 NL 1.01 OV 1.01 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.18 KP 0.97 ! LA 0.99 MK 0.96 NL 1.03 OV 1.00 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.11 KP 0.97 ! LA 0.99 MK 0.94 NL 1.05 OV 1.01 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.02 KP 0.97 ! LA 0.98 MK 0.91 NL 0.99 OV 1.02 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.97 KP 0.98 ! LA 1.01 MK 0.98 NL 0.93 OV 1.01 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.96 KP 0.96 ! LA 0.98 MK 0.94 NL 0.96 OV 0.99 ! PT 1.01 SC 1.09 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 1.24 KP 0.97 ! LA 0.99 MK 1.08 NL 1.08 OV 1.02 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.12 KP 0.97 ! LA 1.01 MK 1.01 NL 1.00 OV 1.02 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.99 KP 0.98 ! LA 1.00 MK 0.97 NL 0.98 OV 1.04 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.98 KP 0.95 ! LA 1.00 MK 0.97 NL 0.95 OV 1.01 ! PT 1.03 SC 1.03 ! ! ! Fit before self-cal, rms=0.081310Jy sigma=0.000652 ! Fit after self-cal, rms=0.082327Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9558 mas, bmaj=1.273 mas, bpa=35.7 degrees ! Estimated noise=223.473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507822 Jy ! Component: 100 - total flux cleaned = 0.000836774 Jy ! Component: 150 - total flux cleaned = 0.000915837 Jy ! Component: 200 - total flux cleaned = 0.00105101 Jy ! Total flux subtracted in 200 components = 0.00105101 Jy ! Clean residual min=-0.000970 max=0.001158 Jy/beam ! Clean residual mean=-0.000004 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.219579 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 164 components and 0.219579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082281Jy sigma=0.000650 ! Fit after self-cal, rms=0.082292Jy sigma=0.000650 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082292Jy sigma=0.000650 ! Fit after self-cal, rms=0.087319Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9548 mas, bmaj=1.269 mas, bpa=37.14 degrees ! Estimated noise=223.461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106966 Jy ! Component: 100 - total flux cleaned = 7.93898e-05 Jy ! Component: 150 - total flux cleaned = 0.00018736 Jy ! Component: 200 - total flux cleaned = 0.000308863 Jy ! Total flux subtracted in 200 components = 0.000308863 Jy ! Clean residual min=-0.000752 max=0.000744 Jy/beam ! Clean residual mean=-0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.219888 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 181 components and 0.219888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087301Jy sigma=0.000646 ! Fit after self-cal, rms=0.087408Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.75456e-05 Jy ! Component: 100 - total flux cleaned = 3.34754e-05 Jy ! Component: 150 - total flux cleaned = 7.72072e-05 Jy ! Component: 200 - total flux cleaned = 0.000137496 Jy ! Total flux subtracted in 200 components = 0.000137496 Jy ! Clean residual min=-0.000737 max=0.000727 Jy/beam ! Clean residual mean=-0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.220025 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 190 components and 0.220025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087398Jy sigma=0.000646 ! Fit after self-cal, rms=0.087397Jy sigma=0.000646 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087397Jy sigma=0.000646 ! Fit after self-cal, rms=0.088642Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9558 mas, bmaj=1.269 mas, bpa=37.64 degrees ! Estimated noise=223.354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.44281e-05 Jy ! Component: 100 - total flux cleaned = -9.10834e-06 Jy ! Component: 150 - total flux cleaned = 6.66147e-05 Jy ! Component: 200 - total flux cleaned = 8.39593e-05 Jy ! Total flux subtracted in 200 components = 8.39593e-05 Jy ! Clean residual min=-0.000739 max=0.000737 Jy/beam ! Clean residual mean=-0.000001 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.220109 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 193 components and 0.220109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088634Jy sigma=0.000646 ! Fit after self-cal, rms=0.088646Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.46859e-05 Jy ! Component: 100 - total flux cleaned = -7.17061e-06 Jy ! Component: 150 - total flux cleaned = 2.48337e-05 Jy ! Component: 200 - total flux cleaned = 3.98389e-05 Jy ! Total flux subtracted in 200 components = 3.98389e-05 Jy ! Clean residual min=-0.000730 max=0.000731 Jy/beam ! Clean residual mean=-0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.220149 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 199 components and 0.220149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088640Jy sigma=0.000646 ! Fit after self-cal, rms=0.088638Jy sigma=0.000646 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088638Jy sigma=0.000646 ! Fit after self-cal, rms=0.088749Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=2.381 mas, bmaj=2.905 mas, bpa=40.72 degrees ! Estimated noise=286.952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041644 Jy ! Component: 100 - total flux cleaned = 0.000451663 Jy ! Component: 150 - total flux cleaned = 0.000438934 Jy ! Component: 200 - total flux cleaned = 0.000448616 Jy ! Total flux subtracted in 200 components = 0.000448616 Jy ! Clean residual min=-0.000690 max=0.000868 Jy/beam ! Clean residual mean=0.000001 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.220598 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 213 components and 0.220598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088747Jy sigma=0.000646 ! Fit after self-cal, rms=0.088748Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24.6, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000471251 Jy ! Component: 100 - total flux cleaned = 0.000540693 Jy ! Component: 150 - total flux cleaned = 0.000583056 Jy ! Component: 200 - total flux cleaned = 0.000631424 Jy ! Total flux subtracted in 200 components = 0.000631424 Jy ! Clean residual min=-0.000670 max=0.000732 Jy/beam ! Clean residual mean=0.000002 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.221229 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 236 components and 0.221229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088744Jy sigma=0.000646 ! Fit after self-cal, rms=0.088743Jy sigma=0.000646 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9561 mas, bmaj=1.27 mas, bpa=37.94 degrees ! Estimated noise=223.225 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9561 x 1.27 at 37.94 degrees (North through East) ! Clean map min=-0.00076882 max=0.056681 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.7221 mas, bmaj=0.983 mas, bpa=39.2 degrees ! Estimated noise=686.919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0544603 Jy ! Component: 100 - total flux cleaned = 0.0847284 Jy ! Component: 150 - total flux cleaned = 0.105369 Jy ! Component: 200 - total flux cleaned = 0.121427 Jy ! Total flux subtracted in 200 components = 0.121427 Jy ! Clean residual min=-0.003762 max=0.009592 Jy/beam ! Clean residual mean=-0.000006 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.121427 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.121427 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9561 mas, bmaj=1.27 mas, bpa=37.94 degrees ! Estimated noise=223.225 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253256 Jy ! Component: 100 - total flux cleaned = 0.0425165 Jy ! Component: 150 - total flux cleaned = 0.0549621 Jy ! Component: 200 - total flux cleaned = 0.0643055 Jy ! Total flux subtracted in 200 components = 0.0643055 Jy ! Clean residual min=-0.002109 max=0.006351 Jy/beam ! Clean residual mean=-0.000040 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.185733 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 90 components and 0.185733 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Added new window around map position (-1, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00731419 Jy ! Component: 100 - total flux cleaned = 0.0128477 Jy ! Component: 150 - total flux cleaned = 0.0171514 Jy ! Component: 200 - total flux cleaned = 0.0205356 Jy ! Total flux subtracted in 200 components = 0.0205356 Jy ! Clean residual min=-0.001079 max=0.002236 Jy/beam ! Clean residual mean=-0.000017 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.206268 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 137 components and 0.206268 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Added new window around map position (2.8, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275545 Jy ! Component: 100 - total flux cleaned = 0.00499213 Jy ! Component: 150 - total flux cleaned = 0.00683623 Jy ! Component: 200 - total flux cleaned = 0.0083651 Jy ! Total flux subtracted in 200 components = 0.0083651 Jy ! Clean residual min=-0.000805 max=0.000932 Jy/beam ! Clean residual mean=-0.000007 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.214633 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 181 components and 0.214634 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=2.381 mas, bmaj=2.905 mas, bpa=40.72 degrees ! Estimated noise=286.952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231853 Jy ! Component: 100 - total flux cleaned = 0.00378247 Jy ! Component: 150 - total flux cleaned = 0.00484777 Jy ! Component: 200 - total flux cleaned = 0.00558946 Jy ! Total flux subtracted in 200 components = 0.00558946 Jy ! Clean residual min=-0.000726 max=0.000828 Jy/beam ! Clean residual mean=-0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.220223 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000425997 Jy ! Component: 100 - total flux cleaned = 0.000771131 Jy ! Component: 150 - total flux cleaned = 0.000858001 Jy ! Component: 200 - total flux cleaned = 0.00092098 Jy ! Total flux subtracted in 200 components = 0.00092098 Jy ! Clean residual min=-0.000740 max=0.000786 Jy/beam ! Clean residual mean=0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.221144 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 260 components and 0.221144 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! Estimated beam: bmin=0.9561 mas, bmaj=1.27 mas, bpa=37.94 degrees ! Estimated noise=223.225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.48433e-05 Jy ! Component: 100 - total flux cleaned = 4.46671e-05 Jy ! Component: 150 - total flux cleaned = 4.46834e-05 Jy ! Component: 200 - total flux cleaned = 4.57751e-05 Jy ! Total flux subtracted in 200 components = 4.57751e-05 Jy ! Clean residual min=-0.000678 max=0.000629 Jy/beam ! Clean residual mean=-0.000000 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.22119 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 282 components and 0.22119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088738Jy sigma=0.000645 ! Fit after self-cal, rms=0.088725Jy sigma=0.000645 wmodel J1320+8450_X_2017_06_15_pus_map.mod ! Writing 282 model components to file: J1320+8450_X_2017_06_15_pus_map.mod wobs J1320+8450_X_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1320+8450_X_2017_06_15_pus_uvs.fits wwins J1320+8450_X_2017_06_15_pus_map.win ! wwins: Wrote 11 windows to J1320+8450_X_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175965 Jy ! Component: 100 - total flux cleaned = -0.000207364 Jy ! Component: 150 - total flux cleaned = -0.000236518 Jy ! Component: 200 - total flux cleaned = -0.000292318 Jy ! Component: 250 - total flux cleaned = -0.000364832 Jy ! Component: 300 - total flux cleaned = -0.000444046 Jy ! Component: 350 - total flux cleaned = -0.000504021 Jy ! Component: 400 - total flux cleaned = -0.000545832 Jy ! Component: 450 - total flux cleaned = -0.000602867 Jy ! Component: 500 - total flux cleaned = -0.000658709 Jy ! Component: 550 - total flux cleaned = -0.000721367 Jy ! Component: 600 - total flux cleaned = -0.000798052 Jy ! Component: 650 - total flux cleaned = -0.000843344 Jy ! Component: 700 - total flux cleaned = -0.000895483 Jy ! Component: 750 - total flux cleaned = -0.000976181 Jy ! Component: 800 - total flux cleaned = -0.00102688 Jy ! Component: 850 - total flux cleaned = -0.00105546 Jy ! Component: 900 - total flux cleaned = -0.00106963 Jy ! Component: 950 - total flux cleaned = -0.00108364 Jy ! Component: 1000 - total flux cleaned = -0.00112514 Jy ! Component: 1050 - total flux cleaned = -0.0011319 Jy ! Component: 1100 - total flux cleaned = -0.00112509 Jy ! Component: 1150 - total flux cleaned = -0.00113857 Jy ! Component: 1200 - total flux cleaned = -0.00115182 Jy ! Component: 1250 - total flux cleaned = -0.00113866 Jy ! Component: 1300 - total flux cleaned = -0.00116475 Jy ! Component: 1350 - total flux cleaned = -0.00114542 Jy ! Component: 1400 - total flux cleaned = -0.00117744 Jy ! Component: 1450 - total flux cleaned = -0.00118372 Jy ! Component: 1500 - total flux cleaned = -0.00120888 Jy ! Component: 1550 - total flux cleaned = -0.00121501 Jy ! Component: 1600 - total flux cleaned = -0.00121498 Jy ! Component: 1650 - total flux cleaned = -0.0012455 Jy ! Component: 1700 - total flux cleaned = -0.00125155 Jy ! Component: 1750 - total flux cleaned = -0.00124556 Jy ! Component: 1800 - total flux cleaned = -0.00125754 Jy ! Component: 1850 - total flux cleaned = -0.00123975 Jy ! Component: 1900 - total flux cleaned = -0.00125745 Jy ! Component: 1950 - total flux cleaned = -0.00128651 Jy ! Component: 2000 - total flux cleaned = -0.00126909 Jy ! Total flux subtracted in 2048 components = -0.00130346 Jy ! Clean residual min=-0.000315 max=0.000330 Jy/beam ! Clean residual mean=-0.000001 rms=0.000107 Jy/beam ! Combined flux in latest and established models = 0.219886 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 426 components and 0.219886 Jy ![Exited script file: muppet] wmap "J1320+8450_X_2017_06_15_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9561 x 1.27 at 37.94 degrees (North through East) ! Clean map min=-0.00052149 max=0.055328 Jy/beam ! Writing clean map to FITS file: J1320+8450_X_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0553279 invert ! Inverting map ! Your choice of large map pixels excluded 0.0485% of the data. ! The x-axis pixel size should ideally be below 0.1997 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000106567 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.577832 0.577832 1.15566 2.31133 4.62265 9.24531 18.4906 36.9812 73.9624 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9561 x 1.27 at 37.94 degrees (North through East) ! Clean map min=-0.00052149 max=0.055328 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1320+8450_X_2017_06_15_pus_uvs.log closed on Tue May 7 19:56:41 2019