! Started logfile: J1319-2724_S_2017_09_26_pus_uvs.log on Sat May 11 13:01:38 2019 obs J1319-2724_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1319-2724_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.672808 visibilities/baseline/integration-bin. ! Found source: J1319-2724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 28484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1319-2724_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 588 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 455 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 747 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2217 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994368Jy sigma=0.006573 ! Fit after self-cal, rms=0.941524Jy sigma=0.006246 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=18.14 mas, bpa=-10.45 degrees ! Estimated noise=1548.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493499 Jy ! Component: 100 - total flux cleaned = 0.0604389 Jy ! Total flux subtracted in 100 components = 0.0604389 Jy ! Clean residual min=-0.005192 max=0.005060 Jy/beam ! Clean residual mean=-0.000025 rms=0.001480 Jy/beam ! Combined flux in latest and established models = 0.0604389 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0604389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099580Jy sigma=0.000632 ! Fit after self-cal, rms=0.098528Jy sigma=0.000625 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.075 mas, bmaj=21.75 mas, bpa=-10.43 degrees ! Estimated noise=781.269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00501054 Jy ! Component: 100 - total flux cleaned = 0.00731179 Jy ! Component: 150 - total flux cleaned = 0.00796726 Jy ! Component: 200 - total flux cleaned = 0.00816802 Jy ! Total flux subtracted in 200 components = 0.00816802 Jy ! Clean residual min=-0.002826 max=0.004428 Jy/beam ! Clean residual mean=-0.000013 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.0686069 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 56 components and 0.0686069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098272Jy sigma=0.000624 ! Fit after self-cal, rms=0.098262Jy sigma=0.000624 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 0.93 KP 0.97 ! LA 1.00 MK 1.11 NL 1.03 OV 0.99 ! PT 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.98 HN 0.87 KP 0.97 ! LA 1.00 MK 1.15 NL 1.07 OV 1.05 ! PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.89 KP 0.93 ! LA 0.95 MK 1.14 NL 1.01 OV 0.97 ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 429 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.098262Jy sigma=0.000624 ! Fit after self-cal, rms=0.098512Jy sigma=0.000625 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.284 mas, bmaj=21.75 mas, bpa=-10.46 degrees ! Estimated noise=796.591 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.71495e-05 Jy ! Component: 100 - total flux cleaned = -3.34868e-05 Jy ! Component: 150 - total flux cleaned = -6.76997e-05 Jy ! Component: 200 - total flux cleaned = -9.78655e-05 Jy ! Total flux subtracted in 200 components = -9.78655e-05 Jy ! Clean residual min=-0.002232 max=0.003597 Jy/beam ! Clean residual mean=-0.000015 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.068509 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.068509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098504Jy sigma=0.000625 ! Fit after self-cal, rms=0.098510Jy sigma=0.000625 ! Inverting map ! Added new window around map position (14, 33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355692 Jy ! Component: 100 - total flux cleaned = 0.00541422 Jy ! Component: 150 - total flux cleaned = 0.00582034 Jy ! Component: 200 - total flux cleaned = 0.0058229 Jy ! Total flux subtracted in 200 components = 0.0058229 Jy ! Clean residual min=-0.001845 max=0.002185 Jy/beam ! Clean residual mean=-0.000009 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0743319 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 115 components and 0.0743319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098372Jy sigma=0.000624 ! Fit after self-cal, rms=0.098300Jy sigma=0.000624 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098300Jy sigma=0.000624 ! Fit after self-cal, rms=0.098537Jy sigma=0.000623 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.291 mas, bmaj=21.92 mas, bpa=-10.55 degrees ! Estimated noise=797.111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191567 Jy ! Component: 100 - total flux cleaned = 0.00277277 Jy ! Component: 150 - total flux cleaned = 0.00309533 Jy ! Component: 200 - total flux cleaned = 0.00327557 Jy ! Total flux subtracted in 200 components = 0.00327557 Jy ! Clean residual min=-0.001920 max=0.001873 Jy/beam ! Clean residual mean=-0.000015 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0776074 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 140 components and 0.0776075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098489Jy sigma=0.000623 ! Fit after self-cal, rms=0.098469Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-57, 42.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195367 Jy ! Component: 100 - total flux cleaned = 0.00291984 Jy ! Component: 150 - total flux cleaned = 0.00370853 Jy ! Component: 200 - total flux cleaned = 0.00423656 Jy ! Total flux subtracted in 200 components = 0.00423656 Jy ! Clean residual min=-0.001709 max=0.001694 Jy/beam ! Clean residual mean=-0.000009 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.081844 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 162 components and 0.081844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098414Jy sigma=0.000623 ! Fit after self-cal, rms=0.098365Jy sigma=0.000622 ! Inverting map ! Added new window around map position (-104, 22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186885 Jy ! Component: 100 - total flux cleaned = 0.00283869 Jy ! Component: 150 - total flux cleaned = 0.00367453 Jy ! Component: 200 - total flux cleaned = 0.00423332 Jy ! Total flux subtracted in 200 components = 0.00423332 Jy ! Clean residual min=-0.001430 max=0.001495 Jy/beam ! Clean residual mean=-0.000009 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.0860773 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 181 components and 0.0860773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098316Jy sigma=0.000622 ! Fit after self-cal, rms=0.098291Jy sigma=0.000622 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098291Jy sigma=0.000622 ! Fit after self-cal, rms=0.097951Jy sigma=0.000622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.266 mas, bmaj=21.9 mas, bpa=-10.58 degrees ! Estimated noise=795.703 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146385 Jy ! Component: 100 - total flux cleaned = 0.00234487 Jy ! Component: 150 - total flux cleaned = 0.00278427 Jy ! Component: 200 - total flux cleaned = 0.0032392 Jy ! Total flux subtracted in 200 components = 0.0032392 Jy ! Clean residual min=-0.001426 max=0.001395 Jy/beam ! Clean residual mean=-0.000007 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0893165 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 210 components and 0.0893165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097919Jy sigma=0.000622 ! Fit after self-cal, rms=0.097881Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00094155 Jy ! Component: 100 - total flux cleaned = 0.00128074 Jy ! Component: 150 - total flux cleaned = 0.00162077 Jy ! Component: 200 - total flux cleaned = 0.00204567 Jy ! Total flux subtracted in 200 components = 0.00204567 Jy ! Clean residual min=-0.001382 max=0.001481 Jy/beam ! Clean residual mean=-0.000008 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0913622 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 226 components and 0.0913622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097858Jy sigma=0.000621 ! Fit after self-cal, rms=0.097828Jy sigma=0.000621 ! Inverting map ! Added new window around map position (72, -48). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010904 Jy ! Component: 100 - total flux cleaned = 0.00145198 Jy ! Component: 150 - total flux cleaned = 0.00160765 Jy ! Component: 200 - total flux cleaned = 0.00195035 Jy ! Total flux subtracted in 200 components = 0.00195035 Jy ! Clean residual min=-0.001192 max=0.001080 Jy/beam ! Clean residual mean=-0.000007 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.0933125 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 249 components and 0.0933126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097799Jy sigma=0.000621 ! Fit after self-cal, rms=0.097785Jy sigma=0.000621 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097785Jy sigma=0.000621 ! Fit after self-cal, rms=0.097369Jy sigma=0.000621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.945 mas, bmaj=23.63 mas, bpa=-3.205 degrees ! Estimated noise=894.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106838 Jy ! Component: 100 - total flux cleaned = 0.00187411 Jy ! Component: 150 - total flux cleaned = 0.00235191 Jy ! Component: 200 - total flux cleaned = 0.00260558 Jy ! Total flux subtracted in 200 components = 0.00260558 Jy ! Clean residual min=-0.001243 max=0.000988 Jy/beam ! Clean residual mean=-0.000005 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.0959181 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 288 components and 0.0959181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097354Jy sigma=0.000621 ! Fit after self-cal, rms=0.097332Jy sigma=0.000621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000847848 Jy ! Component: 100 - total flux cleaned = 0.00126048 Jy ! Component: 150 - total flux cleaned = 0.00150534 Jy ! Component: 200 - total flux cleaned = 0.0017284 Jy ! Total flux subtracted in 200 components = 0.0017284 Jy ! Clean residual min=-0.001183 max=0.000978 Jy/beam ! Clean residual mean=-0.000005 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.0976465 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 312 components and 0.0976465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097320Jy sigma=0.000621 ! Fit after self-cal, rms=0.097318Jy sigma=0.000621 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.25 mas, bmaj=21.88 mas, bpa=-10.61 degrees ! Estimated noise=793.395 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.25 x 21.88 at -10.61 degrees (North through East) ! Clean map min=-0.0011687 max=0.064471 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=18.28 mas, bpa=-10.62 degrees ! Estimated noise=1579.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503987 Jy ! Component: 100 - total flux cleaned = 0.0635558 Jy ! Component: 150 - total flux cleaned = 0.0716919 Jy ! Component: 200 - total flux cleaned = 0.0771599 Jy ! Total flux subtracted in 200 components = 0.0771599 Jy ! Clean residual min=-0.004319 max=0.004524 Jy/beam ! Clean residual mean=-0.000022 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 0.0771599 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0771599 Jy ! Inverting map and beam ! Estimated beam: bmin=4.25 mas, bmaj=21.88 mas, bpa=-10.61 degrees ! Estimated noise=793.395 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445215 Jy ! Component: 100 - total flux cleaned = 0.0076268 Jy ! Component: 150 - total flux cleaned = 0.0101315 Jy ! Component: 200 - total flux cleaned = 0.0121085 Jy ! Total flux subtracted in 200 components = 0.0121085 Jy ! Clean residual min=-0.001929 max=0.001718 Jy/beam ! Clean residual mean=-0.000012 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0892684 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 60 components and 0.0892684 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.945 mas, bmaj=23.63 mas, bpa=-3.205 degrees ! Estimated noise=894.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205727 Jy ! Component: 100 - total flux cleaned = 0.00345197 Jy ! Component: 150 - total flux cleaned = 0.00463589 Jy ! Component: 200 - total flux cleaned = 0.0057104 Jy ! Total flux subtracted in 200 components = 0.0057104 Jy ! Clean residual min=-0.001665 max=0.001285 Jy/beam ! Clean residual mean=-0.000010 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0949788 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000618725 Jy ! Component: 100 - total flux cleaned = 0.00121251 Jy ! Component: 150 - total flux cleaned = 0.00175031 Jy ! Component: 200 - total flux cleaned = 0.00212049 Jy ! Total flux subtracted in 200 components = 0.00212049 Jy ! Clean residual min=-0.001436 max=0.001096 Jy/beam ! Clean residual mean=-0.000007 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0970993 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 158 components and 0.0970993 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.25 mas, bmaj=21.88 mas, bpa=-10.61 degrees ! Estimated noise=793.395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194944 Jy ! Component: 100 - total flux cleaned = -0.000337325 Jy ! Component: 150 - total flux cleaned = -0.000340541 Jy ! Component: 200 - total flux cleaned = -0.00026472 Jy ! Total flux subtracted in 200 components = -0.00026472 Jy ! Clean residual min=-0.001303 max=0.001199 Jy/beam ! Clean residual mean=-0.000007 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0968345 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 190 components and 0.0968345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097333Jy sigma=0.000621 ! Fit after self-cal, rms=0.097328Jy sigma=0.000621 wmodel J1319-2724_S_2017_09_26_pus_map.mod ! Writing 190 model components to file: J1319-2724_S_2017_09_26_pus_map.mod wobs J1319-2724_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1319-2724_S_2017_09_26_pus_uvs.fits wwins J1319-2724_S_2017_09_26_pus_map.win ! wwins: Wrote 5 windows to J1319-2724_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000576673 Jy ! Component: 100 - total flux cleaned = -0.000794027 Jy ! Component: 150 - total flux cleaned = -0.00097412 Jy ! Component: 200 - total flux cleaned = -0.00109147 Jy ! Component: 250 - total flux cleaned = -0.00115493 Jy ! Component: 300 - total flux cleaned = -0.00126255 Jy ! Component: 350 - total flux cleaned = -0.0014246 Jy ! Component: 400 - total flux cleaned = -0.00159511 Jy ! Component: 450 - total flux cleaned = -0.0017049 Jy ! Component: 500 - total flux cleaned = -0.00175852 Jy ! Component: 550 - total flux cleaned = -0.00183664 Jy ! Component: 600 - total flux cleaned = -0.00186174 Jy ! Component: 650 - total flux cleaned = -0.00191136 Jy ! Component: 700 - total flux cleaned = -0.00197216 Jy ! Component: 750 - total flux cleaned = -0.00205552 Jy ! Component: 800 - total flux cleaned = -0.00202051 Jy ! Component: 850 - total flux cleaned = -0.00198621 Jy ! Component: 900 - total flux cleaned = -0.00193009 Jy ! Component: 950 - total flux cleaned = -0.00190796 Jy ! Component: 1000 - total flux cleaned = -0.00186433 Jy ! Component: 1050 - total flux cleaned = -0.00184287 Jy ! Component: 1100 - total flux cleaned = -0.00178999 Jy ! Component: 1150 - total flux cleaned = -0.00174841 Jy ! Component: 1200 - total flux cleaned = -0.00171748 Jy ! Component: 1250 - total flux cleaned = -0.00168698 Jy ! Component: 1300 - total flux cleaned = -0.00165696 Jy ! Component: 1350 - total flux cleaned = -0.00167683 Jy ! Component: 1400 - total flux cleaned = -0.001667 Jy ! Component: 1450 - total flux cleaned = -0.00166706 Jy ! Component: 1500 - total flux cleaned = -0.00167665 Jy ! Component: 1550 - total flux cleaned = -0.00170502 Jy ! Component: 1600 - total flux cleaned = -0.00172381 Jy ! Component: 1650 - total flux cleaned = -0.00172378 Jy ! Component: 1700 - total flux cleaned = -0.00172381 Jy ! Component: 1750 - total flux cleaned = -0.00176041 Jy ! Component: 1800 - total flux cleaned = -0.00176041 Jy ! Component: 1850 - total flux cleaned = -0.00177834 Jy ! Component: 1900 - total flux cleaned = -0.00176937 Jy ! Component: 1950 - total flux cleaned = -0.00176941 Jy ! Component: 2000 - total flux cleaned = -0.00174295 Jy ! Component: 2050 - total flux cleaned = -0.00174292 Jy ! Component: 2100 - total flux cleaned = -0.0017082 Jy ! Component: 2150 - total flux cleaned = -0.00172554 Jy ! Component: 2200 - total flux cleaned = -0.00170833 Jy ! Component: 2250 - total flux cleaned = -0.00169978 Jy ! Component: 2300 - total flux cleaned = -0.00168276 Jy ! Component: 2350 - total flux cleaned = -0.00167429 Jy ! Component: 2400 - total flux cleaned = -0.00165748 Jy ! Component: 2450 - total flux cleaned = -0.00164912 Jy ! Component: 2500 - total flux cleaned = -0.00163249 Jy ! Component: 2550 - total flux cleaned = -0.00162427 Jy ! Component: 2600 - total flux cleaned = -0.00161604 Jy ! Component: 2650 - total flux cleaned = -0.00161602 Jy ! Component: 2700 - total flux cleaned = -0.00162415 Jy ! Component: 2750 - total flux cleaned = -0.00160792 Jy ! Component: 2800 - total flux cleaned = -0.00159176 Jy ! Component: 2850 - total flux cleaned = -0.00156766 Jy ! Component: 2900 - total flux cleaned = -0.00158364 Jy ! Component: 2950 - total flux cleaned = -0.00156774 Jy ! Component: 3000 - total flux cleaned = -0.00156776 Jy ! Component: 3050 - total flux cleaned = -0.00155984 Jy ! Component: 3100 - total flux cleaned = -0.00152826 Jy ! Component: 3150 - total flux cleaned = -0.00153609 Jy ! Component: 3200 - total flux cleaned = -0.00149682 Jy ! Component: 3250 - total flux cleaned = -0.00148112 Jy ! Component: 3300 - total flux cleaned = -0.00145762 Jy ! Component: 3350 - total flux cleaned = -0.0014106 Jy ! Component: 3400 - total flux cleaned = -0.00138716 Jy ! Component: 3450 - total flux cleaned = -0.00137148 Jy ! Component: 3500 - total flux cleaned = -0.00134023 Jy ! Component: 3550 - total flux cleaned = -0.0013168 Jy ! Component: 3600 - total flux cleaned = -0.0012778 Jy ! Component: 3650 - total flux cleaned = -0.00123884 Jy ! Component: 3700 - total flux cleaned = -0.00121545 Jy ! Component: 3750 - total flux cleaned = -0.00116874 Jy ! Component: 3800 - total flux cleaned = -0.00114539 Jy ! Component: 3850 - total flux cleaned = -0.00111427 Jy ! Component: 3900 - total flux cleaned = -0.0010676 Jy ! Component: 3950 - total flux cleaned = -0.00104427 Jy ! Component: 4000 - total flux cleaned = -0.00101316 Jy ! Component: 4050 - total flux cleaned = -0.000982082 Jy ! Total flux subtracted in 4096 components = -0.00094325 Jy ! Clean residual min=-0.000426 max=0.000420 Jy/beam ! Clean residual mean=-0.000000 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.0958913 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 449 components and 0.0958913 Jy ![Exited script file: muppet] wmap "J1319-2724_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.25 x 21.88 at -10.61 degrees (North through East) ! Clean map min=-0.0015857 max=0.063388 Jy/beam ! Writing clean map to FITS file: J1319-2724_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0633876 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151016 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.714725 0.714725 1.42945 2.8589 5.7178 11.4356 22.8712 45.7424 91.4849 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.25 x 21.88 at -10.61 degrees (North through East) ! Clean map min=-0.0015857 max=0.063388 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1319-2724_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:01:44 2019