! Started logfile: J1317+3425_S_2017_05_27_pus_uvs.log on Fri May 3 11:08:25 2019 obs J1317+3425_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1317+3425_S_2017_05_27_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.849839 visibilities/baseline/integration-bin. ! Found source: J1317+3425 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 26464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1317+3425_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1013 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.770780Jy sigma=0.045023 ! Fit after self-cal, rms=0.756530Jy sigma=0.044990 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=6.492 mas, bpa=7.362 degrees ! Estimated noise=581.923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112513 Jy ! Component: 100 - total flux cleaned = 0.1469 Jy ! Total flux subtracted in 100 components = 0.1469 Jy ! Clean residual min=-0.039686 max=0.059470 Jy/beam ! Clean residual mean=0.000043 rms=0.014365 Jy/beam ! Combined flux in latest and established models = 0.1469 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.1469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156060Jy sigma=0.005221 ! Fit after self-cal, rms=0.155799Jy sigma=0.005220 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.827 mas, bmaj=6.763 mas, bpa=8.952 degrees ! Estimated noise=326.655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0387096 Jy ! Component: 100 - total flux cleaned = 0.0624357 Jy ! Component: 150 - total flux cleaned = 0.0786697 Jy ! Component: 200 - total flux cleaned = 0.0906763 Jy ! Total flux subtracted in 200 components = 0.0906763 Jy ! Clean residual min=-0.035438 max=0.052633 Jy/beam ! Clean residual mean=0.000050 rms=0.011964 Jy/beam ! Combined flux in latest and established models = 0.237577 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.237577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135321Jy sigma=0.005416 ! Fit after self-cal, rms=0.134746Jy sigma=0.005416 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 25.35 FD 0.78 HN 0.79 KP 0.88 ! LA 0.89 MK 0.85 NL 0.78 OV 0.87 ! PT 0.93 SC 0.62 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.80 HN 0.81 KP 0.84 ! LA 0.85 MK 0.82 NL 0.93 OV 0.89 ! PT 0.89 SC 0.70 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.82 HN 0.80 KP 0.86 ! LA 0.88 MK 0.85 NL 0.94 OV 0.81 ! PT 0.89 SC 0.71 ! ! ! Correcting IF 4. ! A total of 159 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.79 KP 1.00* ! LA 0.94 MK 0.65 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.134746Jy sigma=0.005416 ! Fit after self-cal, rms=1.288902Jy sigma=0.001002 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.612 mas, bmaj=6.763 mas, bpa=5.757 degrees ! Estimated noise=388.359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00853171 Jy ! Component: 100 - total flux cleaned = -0.0107309 Jy ! Component: 150 - total flux cleaned = -0.0123334 Jy ! Component: 200 - total flux cleaned = -0.0127579 Jy ! Total flux subtracted in 200 components = -0.0127579 Jy ! Clean residual min=-0.009301 max=0.007412 Jy/beam ! Clean residual mean=0.000008 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.224819 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 26 components and 0.224819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.282717Jy sigma=0.000898 ! Fit after self-cal, rms=1.282858Jy sigma=0.000869 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.282858Jy sigma=0.000869 ! Fit after self-cal, rms=0.350544Jy sigma=0.000731 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.705 mas, bmaj=6.841 mas, bpa=5.49 degrees ! Estimated noise=382.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00606674 Jy ! Component: 100 - total flux cleaned = -0.00673559 Jy ! Component: 150 - total flux cleaned = -0.0071099 Jy ! Component: 200 - total flux cleaned = -0.00743139 Jy ! Total flux subtracted in 200 components = -0.00743139 Jy ! Clean residual min=-0.003401 max=0.004119 Jy/beam ! Clean residual mean=0.000001 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.217387 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.217387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349826Jy sigma=0.000712 ! Fit after self-cal, rms=0.349813Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239078 Jy ! Component: 100 - total flux cleaned = 0.00304531 Jy ! Component: 150 - total flux cleaned = 0.00338848 Jy ! Component: 200 - total flux cleaned = 0.0037878 Jy ! Total flux subtracted in 200 components = 0.0037878 Jy ! Clean residual min=-0.002871 max=0.002562 Jy/beam ! Clean residual mean=0.000000 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.221175 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 50 components and 0.221175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349535Jy sigma=0.000705 ! Fit after self-cal, rms=0.349532Jy sigma=0.000704 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349532Jy sigma=0.000704 ! Fit after self-cal, rms=0.371323Jy sigma=0.000701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.714 mas, bmaj=6.893 mas, bpa=4.853 degrees ! Estimated noise=384.235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00275268 Jy ! Component: 100 - total flux cleaned = -0.00274458 Jy ! Component: 150 - total flux cleaned = -0.00263836 Jy ! Component: 200 - total flux cleaned = -0.00239025 Jy ! Total flux subtracted in 200 components = -0.00239025 Jy ! Clean residual min=-0.002246 max=0.002025 Jy/beam ! Clean residual mean=-0.000001 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.218785 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 52 components and 0.218785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371077Jy sigma=0.000697 ! Fit after self-cal, rms=0.371075Jy sigma=0.000697 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000548276 Jy ! Component: 100 - total flux cleaned = 0.000812714 Jy ! Component: 150 - total flux cleaned = 0.000931954 Jy ! Component: 200 - total flux cleaned = 0.00103745 Jy ! Total flux subtracted in 200 components = 0.00103745 Jy ! Clean residual min=-0.002027 max=0.001822 Jy/beam ! Clean residual mean=-0.000001 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.219822 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.219822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370951Jy sigma=0.000696 ! Fit after self-cal, rms=0.370951Jy sigma=0.000696 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370951Jy sigma=0.000696 ! Fit after self-cal, rms=0.381876Jy sigma=0.000695 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.507 mas, bmaj=9.762 mas, bpa=-1.22 degrees ! Estimated noise=465.176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00180215 Jy ! Component: 100 - total flux cleaned = -0.00171442 Jy ! Component: 150 - total flux cleaned = -0.00156773 Jy ! Component: 200 - total flux cleaned = -0.00140953 Jy ! Total flux subtracted in 200 components = -0.00140953 Jy ! Clean residual min=-0.001701 max=0.001576 Jy/beam ! Clean residual mean=-0.000003 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.218413 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.218413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.381769Jy sigma=0.000694 ! Fit after self-cal, rms=0.381770Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239146 Jy ! Component: 100 - total flux cleaned = 0.000390313 Jy ! Component: 150 - total flux cleaned = 0.000497153 Jy ! Component: 200 - total flux cleaned = 0.00057146 Jy ! Total flux subtracted in 200 components = 0.00057146 Jy ! Clean residual min=-0.001687 max=0.001590 Jy/beam ! Clean residual mean=-0.000003 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.218984 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.218984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.381715Jy sigma=0.000694 ! Fit after self-cal, rms=0.381716Jy sigma=0.000694 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=6.925 mas, bpa=4.511 degrees ! Estimated noise=385.715 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.724 x 6.925 at 4.511 degrees (North through East) ! Clean map min=-0.0017963 max=0.17683 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=6.189 mas, bpa=5.056 degrees ! Estimated noise=708.039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137437 Jy ! Component: 100 - total flux cleaned = 0.170394 Jy ! Component: 150 - total flux cleaned = 0.184727 Jy ! Component: 200 - total flux cleaned = 0.192955 Jy ! Total flux subtracted in 200 components = 0.192955 Jy ! Clean residual min=-0.002916 max=0.004342 Jy/beam ! Clean residual mean=0.000003 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.192955 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.192955 Jy ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=6.925 mas, bpa=4.511 degrees ! Estimated noise=385.715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673425 Jy ! Component: 100 - total flux cleaned = 0.0111685 Jy ! Component: 150 - total flux cleaned = 0.0143479 Jy ! Component: 200 - total flux cleaned = 0.0167537 Jy ! Total flux subtracted in 200 components = 0.0167537 Jy ! Clean residual min=-0.001717 max=0.001835 Jy/beam ! Clean residual mean=-0.000003 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.209708 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 72 components and 0.209709 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.507 mas, bmaj=9.762 mas, bpa=-1.22 degrees ! Estimated noise=465.176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283494 Jy ! Component: 100 - total flux cleaned = 0.00457829 Jy ! Component: 150 - total flux cleaned = 0.00577613 Jy ! Component: 200 - total flux cleaned = 0.00664029 Jy ! Total flux subtracted in 200 components = 0.00664029 Jy ! Clean residual min=-0.001544 max=0.001618 Jy/beam ! Clean residual mean=-0.000004 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.216349 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000648063 Jy ! Component: 100 - total flux cleaned = 0.00114172 Jy ! Component: 150 - total flux cleaned = 0.00151852 Jy ! Component: 200 - total flux cleaned = 0.00173308 Jy ! Total flux subtracted in 200 components = 0.00173308 Jy ! Clean residual min=-0.001483 max=0.001599 Jy/beam ! Clean residual mean=-0.000003 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.218082 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 127 components and 0.218082 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=6.925 mas, bpa=4.511 degrees ! Estimated noise=385.715 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154661 Jy ! Component: 100 - total flux cleaned = -0.00015571 Jy ! Component: 150 - total flux cleaned = -0.000132802 Jy ! Component: 200 - total flux cleaned = -0.000133467 Jy ! Total flux subtracted in 200 components = -0.000133467 Jy ! Clean residual min=-0.001382 max=0.001394 Jy/beam ! Clean residual mean=-0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.217948 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 138 components and 0.217948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.381337Jy sigma=0.000692 ! Fit after self-cal, rms=0.381335Jy sigma=0.000692 wmodel J1317+3425_S_2017_05_27_pus_map.mod ! Writing 138 model components to file: J1317+3425_S_2017_05_27_pus_map.mod wobs J1317+3425_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1317+3425_S_2017_05_27_pus_uvs.fits wwins J1317+3425_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1317+3425_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268531 Jy ! Component: 100 - total flux cleaned = 0.000445508 Jy ! Component: 150 - total flux cleaned = 0.000494393 Jy ! Component: 200 - total flux cleaned = 0.000564999 Jy ! Component: 250 - total flux cleaned = 0.000564674 Jy ! Component: 300 - total flux cleaned = 0.000542645 Jy ! Component: 350 - total flux cleaned = 0.000499372 Jy ! Component: 400 - total flux cleaned = 0.000457297 Jy ! Component: 450 - total flux cleaned = 0.000436468 Jy ! Component: 500 - total flux cleaned = 0.000375427 Jy ! Component: 550 - total flux cleaned = 0.000335696 Jy ! Component: 600 - total flux cleaned = 0.00029676 Jy ! Component: 650 - total flux cleaned = 0.000277779 Jy ! Component: 700 - total flux cleaned = 0.000240374 Jy ! Component: 750 - total flux cleaned = 0.000259054 Jy ! Component: 800 - total flux cleaned = 0.000277237 Jy ! Component: 850 - total flux cleaned = 0.000276942 Jy ! Component: 900 - total flux cleaned = 0.000259465 Jy ! Component: 950 - total flux cleaned = 0.000242137 Jy ! Component: 1000 - total flux cleaned = 0.00017352 Jy ! Component: 1050 - total flux cleaned = 0.00019095 Jy ! Component: 1100 - total flux cleaned = 0.000190766 Jy ! Component: 1150 - total flux cleaned = 0.000158038 Jy ! Component: 1200 - total flux cleaned = 0.000190318 Jy ! Component: 1250 - total flux cleaned = 0.00015814 Jy ! Component: 1300 - total flux cleaned = 0.000141925 Jy ! Component: 1350 - total flux cleaned = 0.000110585 Jy ! Component: 1400 - total flux cleaned = 0.000126293 Jy ! Component: 1450 - total flux cleaned = 0.000141515 Jy ! Component: 1500 - total flux cleaned = 0.000141389 Jy ! Component: 1550 - total flux cleaned = 0.000156484 Jy ! Component: 1600 - total flux cleaned = 0.000126594 Jy ! Component: 1650 - total flux cleaned = 0.000141236 Jy ! Component: 1700 - total flux cleaned = 0.000112147 Jy ! Component: 1750 - total flux cleaned = 0.000126651 Jy ! Component: 1800 - total flux cleaned = 8.40953e-05 Jy ! Component: 1850 - total flux cleaned = 0.00012633 Jy ! Component: 1900 - total flux cleaned = 0.000126141 Jy ! Component: 1950 - total flux cleaned = 0.000139871 Jy ! Component: 2000 - total flux cleaned = 0.000139866 Jy ! Component: 2050 - total flux cleaned = 0.000126436 Jy ! Component: 2100 - total flux cleaned = 0.000166927 Jy ! Component: 2150 - total flux cleaned = 0.00016687 Jy ! Component: 2200 - total flux cleaned = 0.000153656 Jy ! Component: 2250 - total flux cleaned = 0.000127567 Jy ! Component: 2300 - total flux cleaned = 0.00017954 Jy ! Component: 2350 - total flux cleaned = 0.000166605 Jy ! Component: 2400 - total flux cleaned = 0.000140988 Jy ! Component: 2450 - total flux cleaned = 0.00012821 Jy ! Component: 2500 - total flux cleaned = 0.000141028 Jy ! Component: 2550 - total flux cleaned = 9.11207e-05 Jy ! Component: 2600 - total flux cleaned = 0.000115876 Jy ! Component: 2650 - total flux cleaned = 9.12046e-05 Jy ! Component: 2700 - total flux cleaned = 9.13433e-05 Jy ! Component: 2750 - total flux cleaned = 6.72399e-05 Jy ! Component: 2800 - total flux cleaned = 5.51573e-05 Jy ! Component: 2850 - total flux cleaned = 5.51169e-05 Jy ! Component: 2900 - total flux cleaned = 3.1413e-05 Jy ! Component: 2950 - total flux cleaned = 1.95403e-05 Jy ! Component: 3000 - total flux cleaned = -3.80721e-06 Jy ! Component: 3050 - total flux cleaned = -3.86083e-05 Jy ! Component: 3100 - total flux cleaned = -1.56002e-05 Jy ! Component: 3150 - total flux cleaned = 7.29154e-06 Jy ! Component: 3200 - total flux cleaned = -2.70272e-05 Jy ! Component: 3250 - total flux cleaned = -7.22748e-05 Jy ! Component: 3300 - total flux cleaned = -0.000117224 Jy ! Component: 3350 - total flux cleaned = -9.48844e-05 Jy ! Component: 3400 - total flux cleaned = -0.000128117 Jy ! Component: 3450 - total flux cleaned = -0.000161154 Jy ! Component: 3500 - total flux cleaned = -0.000150215 Jy ! Component: 3550 - total flux cleaned = -0.000161205 Jy ! Component: 3600 - total flux cleaned = -0.00016127 Jy ! Component: 3650 - total flux cleaned = -0.00017214 Jy ! Component: 3700 - total flux cleaned = -0.000225614 Jy ! Component: 3750 - total flux cleaned = -0.000246804 Jy ! Component: 3800 - total flux cleaned = -0.000267794 Jy ! Component: 3850 - total flux cleaned = -0.000278252 Jy ! Component: 3900 - total flux cleaned = -0.000278193 Jy ! Component: 3950 - total flux cleaned = -0.000278167 Jy ! Component: 4000 - total flux cleaned = -0.000278137 Jy ! Component: 4050 - total flux cleaned = -0.000308806 Jy ! Total flux subtracted in 4096 components = -0.000308809 Jy ! Clean residual min=-0.000684 max=0.000557 Jy/beam ! Clean residual mean=0.000000 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.21764 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 453 components and 0.217639 Jy ![Exited script file: muppet] wmap "J1317+3425_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.724 x 6.925 at 4.511 degrees (North through East) ! Clean map min=-0.0012409 max=0.17813 Jy/beam ! Writing clean map to FITS file: J1317+3425_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.178129 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000192936 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.324938 0.324938 0.649875 1.29975 2.5995 5.199 10.398 20.796 41.592 83.184 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.178 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.724 x 6.925 at 4.511 degrees (North through East) ! Clean map min=-0.0012409 max=0.17813 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1317+3425_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:08:30 2019