! Started logfile: J1316-3338_S_2017_10_21_pus_uvs.log on Sat May 11 20:58:40 2019 obs J1316-3338_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1316-3338_S_2017_10_21_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.817308 visibilities/baseline/integration-bin. ! Found source: J1316-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 3060 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1316-3338_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.700342Jy sigma=0.004657 ! Fit after self-cal, rms=0.681235Jy sigma=0.004522 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=14.73 mas, bpa=-21.51 degrees ! Estimated noise=2948 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.240004 Jy ! Component: 100 - total flux cleaned = 0.336701 Jy ! Total flux subtracted in 100 components = 0.336701 Jy ! Clean residual min=-0.025208 max=0.046040 Jy/beam ! Clean residual mean=-0.000233 rms=0.008673 Jy/beam ! Combined flux in latest and established models = 0.336701 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.336701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181782Jy sigma=0.001169 ! Fit after self-cal, rms=0.181238Jy sigma=0.001166 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=17.41 mas, bpa=-20.39 degrees ! Estimated noise=2264.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0829283 Jy ! Component: 100 - total flux cleaned = 0.125905 Jy ! Component: 150 - total flux cleaned = 0.151372 Jy ! Component: 200 - total flux cleaned = 0.167065 Jy ! Total flux subtracted in 200 components = 0.167065 Jy ! Clean residual min=-0.016377 max=0.020321 Jy/beam ! Clean residual mean=-0.000352 rms=0.005118 Jy/beam ! Combined flux in latest and established models = 0.503766 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 86 components and 0.503766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142641Jy sigma=0.000847 ! Fit after self-cal, rms=0.142393Jy sigma=0.000845 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.42 FD 0.91 HN 1.05 KP 1.06 ! LA 0.99 MK 1.03 NL 1.07 OV 0.97 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.08 KP 0.99 ! LA 0.95 MK 1.03 NL 1.12 OV 0.96 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.02 KP 1.02 ! LA 0.73 MK 0.98 NL 1.29 OV 0.91 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.98 KP 1.00* ! LA 0.79 MK 1.01 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.142393Jy sigma=0.000845 ! Fit after self-cal, rms=0.137453Jy sigma=0.000760 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.443 mas, bmaj=17.68 mas, bpa=-20.5 degrees ! Estimated noise=2268.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00340165 Jy ! Component: 100 - total flux cleaned = -0.00353993 Jy ! Component: 150 - total flux cleaned = -0.00341303 Jy ! Component: 200 - total flux cleaned = -0.00341542 Jy ! Total flux subtracted in 200 components = -0.00341542 Jy ! Clean residual min=-0.010352 max=0.014205 Jy/beam ! Clean residual mean=-0.000022 rms=0.002980 Jy/beam ! Combined flux in latest and established models = 0.500351 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 103 components and 0.500351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136969Jy sigma=0.000758 ! Fit after self-cal, rms=0.137059Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137059Jy sigma=0.000758 ! Fit after self-cal, rms=0.141234Jy sigma=0.000733 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.446 mas, bmaj=17.78 mas, bpa=-20.57 degrees ! Estimated noise=2282.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.95964e-05 Jy ! Component: 100 - total flux cleaned = -5.31116e-05 Jy ! Component: 150 - total flux cleaned = -0.000148929 Jy ! Component: 200 - total flux cleaned = -0.000317817 Jy ! Total flux subtracted in 200 components = -0.000317817 Jy ! Clean residual min=-0.007859 max=0.012696 Jy/beam ! Clean residual mean=-0.000038 rms=0.002367 Jy/beam ! Combined flux in latest and established models = 0.500033 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 116 components and 0.500033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141049Jy sigma=0.000732 ! Fit after self-cal, rms=0.141059Jy sigma=0.000732 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113688 Jy ! Component: 100 - total flux cleaned = 0.0143022 Jy ! Component: 150 - total flux cleaned = 0.0152213 Jy ! Component: 200 - total flux cleaned = 0.0156885 Jy ! Total flux subtracted in 200 components = 0.0156885 Jy ! Clean residual min=-0.007195 max=0.008776 Jy/beam ! Clean residual mean=0.000010 rms=0.001838 Jy/beam ! Combined flux in latest and established models = 0.515722 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 159 components and 0.515722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139977Jy sigma=0.000723 ! Fit after self-cal, rms=0.139869Jy sigma=0.000723 ! Inverting map ! Added new window around map position (-108, 74). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627486 Jy ! Component: 100 - total flux cleaned = 0.00818913 Jy ! Component: 150 - total flux cleaned = 0.00947979 Jy ! Component: 200 - total flux cleaned = 0.0103851 Jy ! Total flux subtracted in 200 components = 0.0103851 Jy ! Clean residual min=-0.006352 max=0.006423 Jy/beam ! Clean residual mean=0.000002 rms=0.001610 Jy/beam ! Combined flux in latest and established models = 0.526107 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 193 components and 0.526107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139331Jy sigma=0.000719 ! Fit after self-cal, rms=0.139302Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139302Jy sigma=0.000719 ! Fit after self-cal, rms=0.143194Jy sigma=0.000716 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=17.78 mas, bpa=-20.62 degrees ! Estimated noise=2277.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00390229 Jy ! Component: 100 - total flux cleaned = 0.00438851 Jy ! Component: 150 - total flux cleaned = 0.00427034 Jy ! Component: 200 - total flux cleaned = 0.00417035 Jy ! Total flux subtracted in 200 components = 0.00417035 Jy ! Clean residual min=-0.005577 max=0.005572 Jy/beam ! Clean residual mean=-0.000032 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.530277 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 215 components and 0.530277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142938Jy sigma=0.000714 ! Fit after self-cal, rms=0.142930Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.83985e-06 Jy ! Component: 100 - total flux cleaned = 0.000101364 Jy ! Component: 150 - total flux cleaned = -6.56491e-05 Jy ! Component: 200 - total flux cleaned = -6.58073e-05 Jy ! Total flux subtracted in 200 components = -6.58073e-05 Jy ! Clean residual min=-0.005405 max=0.005182 Jy/beam ! Clean residual mean=-0.000027 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.530211 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 231 components and 0.530212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142796Jy sigma=0.000713 ! Fit after self-cal, rms=0.142793Jy sigma=0.000713 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142793Jy sigma=0.000713 ! Fit after self-cal, rms=0.143067Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.291 mas, bmaj=33.15 mas, bpa=-6.815 degrees ! Estimated noise=2638.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000555579 Jy ! Component: 100 - total flux cleaned = 0.000848765 Jy ! Component: 150 - total flux cleaned = 0.00116121 Jy ! Component: 200 - total flux cleaned = 0.00143411 Jy ! Total flux subtracted in 200 components = 0.00143411 Jy ! Clean residual min=-0.004689 max=0.004967 Jy/beam ! Clean residual mean=-0.000052 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.531646 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 255 components and 0.531646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142978Jy sigma=0.000713 ! Fit after self-cal, rms=0.142972Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.89466e-05 Jy ! Component: 100 - total flux cleaned = 0.000525954 Jy ! Component: 150 - total flux cleaned = 0.000766773 Jy ! Component: 200 - total flux cleaned = 0.000997072 Jy ! Total flux subtracted in 200 components = 0.000997072 Jy ! Clean residual min=-0.004657 max=0.004848 Jy/beam ! Clean residual mean=-0.000048 rms=0.001342 Jy/beam ! Combined flux in latest and established models = 0.532643 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 267 components and 0.532643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142904Jy sigma=0.000713 ! Fit after self-cal, rms=0.142901Jy sigma=0.000712 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=17.78 mas, bpa=-20.64 degrees ! Estimated noise=2276.6 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.46 x 17.78 at -20.64 degrees (North through East) ! Clean map min=-0.0058443 max=0.32348 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.735 mas, bmaj=14.97 mas, bpa=-21.79 degrees ! Estimated noise=3073.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.249661 Jy ! Component: 100 - total flux cleaned = 0.35008 Jy ! Component: 150 - total flux cleaned = 0.403193 Jy ! Component: 200 - total flux cleaned = 0.435552 Jy ! Total flux subtracted in 200 components = 0.435552 Jy ! Clean residual min=-0.012496 max=0.016985 Jy/beam ! Clean residual mean=-0.000104 rms=0.003620 Jy/beam ! Combined flux in latest and established models = 0.435552 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.435552 Jy ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=17.78 mas, bpa=-20.64 degrees ! Estimated noise=2276.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295109 Jy ! Component: 100 - total flux cleaned = 0.0476468 Jy ! Component: 150 - total flux cleaned = 0.0595621 Jy ! Component: 200 - total flux cleaned = 0.0683268 Jy ! Total flux subtracted in 200 components = 0.0683268 Jy ! Clean residual min=-0.006215 max=0.006708 Jy/beam ! Clean residual mean=-0.000096 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 0.503879 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 115 components and 0.503879 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.291 mas, bmaj=33.15 mas, bpa=-6.815 degrees ! Estimated noise=2638.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00852486 Jy ! Component: 100 - total flux cleaned = 0.0138657 Jy ! Component: 150 - total flux cleaned = 0.017744 Jy ! Component: 200 - total flux cleaned = 0.0206943 Jy ! Total flux subtracted in 200 components = 0.0206943 Jy ! Clean residual min=-0.004798 max=0.005147 Jy/beam ! Clean residual mean=-0.000085 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 0.524574 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017622 Jy ! Component: 100 - total flux cleaned = 0.00279113 Jy ! Component: 150 - total flux cleaned = 0.00363921 Jy ! Component: 200 - total flux cleaned = 0.00455059 Jy ! Total flux subtracted in 200 components = 0.00455059 Jy ! Clean residual min=-0.004433 max=0.004945 Jy/beam ! Clean residual mean=-0.000069 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.529124 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 187 components and 0.529124 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=17.78 mas, bpa=-20.64 degrees ! Estimated noise=2276.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000701217 Jy ! Component: 100 - total flux cleaned = 0.00151484 Jy ! Component: 150 - total flux cleaned = 0.00163233 Jy ! Component: 200 - total flux cleaned = 0.00173572 Jy ! Total flux subtracted in 200 components = 0.00173572 Jy ! Clean residual min=-0.005072 max=0.005719 Jy/beam ! Clean residual mean=-0.000037 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 0.53086 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 212 components and 0.53086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143218Jy sigma=0.000714 ! Fit after self-cal, rms=0.143139Jy sigma=0.000714 wmodel J1316-3338_S_2017_10_21_pus_map.mod ! Writing 212 model components to file: J1316-3338_S_2017_10_21_pus_map.mod wobs J1316-3338_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1316-3338_S_2017_10_21_pus_uvs.fits wwins J1316-3338_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J1316-3338_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000932435 Jy ! Component: 100 - total flux cleaned = 0.000147643 Jy ! Component: 150 - total flux cleaned = -0.000509658 Jy ! Component: 200 - total flux cleaned = -0.00121142 Jy ! Component: 250 - total flux cleaned = -0.0016596 Jy ! Component: 300 - total flux cleaned = -0.00187301 Jy ! Component: 350 - total flux cleaned = -0.00201014 Jy ! Component: 400 - total flux cleaned = -0.00221105 Jy ! Component: 450 - total flux cleaned = -0.00195311 Jy ! Component: 500 - total flux cleaned = -0.00182886 Jy ! Component: 550 - total flux cleaned = -0.00164493 Jy ! Component: 600 - total flux cleaned = -0.00128467 Jy ! Component: 650 - total flux cleaned = -0.00099242 Jy ! Component: 700 - total flux cleaned = -0.00070648 Jy ! Component: 750 - total flux cleaned = -0.000539386 Jy ! Component: 800 - total flux cleaned = -0.000209755 Jy ! Component: 850 - total flux cleaned = -4.84634e-05 Jy ! Component: 900 - total flux cleaned = 0.000110915 Jy ! Component: 950 - total flux cleaned = 0.000319879 Jy ! Component: 1000 - total flux cleaned = 0.000575804 Jy ! Component: 1050 - total flux cleaned = 0.000826303 Jy ! Component: 1100 - total flux cleaned = 0.000875758 Jy ! Component: 1150 - total flux cleaned = 0.000973156 Jy ! Component: 1200 - total flux cleaned = 0.00116469 Jy ! Component: 1250 - total flux cleaned = 0.00130534 Jy ! Component: 1300 - total flux cleaned = 0.00135175 Jy ! Component: 1350 - total flux cleaned = 0.00153414 Jy ! Component: 1400 - total flux cleaned = 0.00166923 Jy ! Component: 1450 - total flux cleaned = 0.00184716 Jy ! Component: 1500 - total flux cleaned = 0.0020665 Jy ! Component: 1550 - total flux cleaned = 0.00219618 Jy ! Component: 1600 - total flux cleaned = 0.00232371 Jy ! Component: 1650 - total flux cleaned = 0.00236623 Jy ! Component: 1700 - total flux cleaned = 0.00257412 Jy ! Component: 1750 - total flux cleaned = 0.00265582 Jy ! Component: 1800 - total flux cleaned = 0.00269576 Jy ! Component: 1850 - total flux cleaned = 0.00269532 Jy ! Component: 1900 - total flux cleaned = 0.00269563 Jy ! Component: 1950 - total flux cleaned = 0.00273484 Jy ! Component: 2000 - total flux cleaned = 0.00273497 Jy ! Component: 2050 - total flux cleaned = 0.00296502 Jy ! Component: 2100 - total flux cleaned = 0.00296533 Jy ! Component: 2150 - total flux cleaned = 0.00319085 Jy ! Component: 2200 - total flux cleaned = 0.00337645 Jy ! Component: 2250 - total flux cleaned = 0.00344988 Jy ! Component: 2300 - total flux cleaned = 0.00352284 Jy ! Component: 2350 - total flux cleaned = 0.00366761 Jy ! Component: 2400 - total flux cleaned = 0.00388278 Jy ! Component: 2450 - total flux cleaned = 0.00406042 Jy ! Component: 2500 - total flux cleaned = 0.00427208 Jy ! Component: 2550 - total flux cleaned = 0.00448164 Jy ! Component: 2600 - total flux cleaned = 0.00455105 Jy ! Component: 2650 - total flux cleaned = 0.00479187 Jy ! Component: 2700 - total flux cleaned = 0.00503042 Jy ! Component: 2750 - total flux cleaned = 0.00516551 Jy ! Component: 2800 - total flux cleaned = 0.00540037 Jy ! Component: 2850 - total flux cleaned = 0.00550021 Jy ! Component: 2900 - total flux cleaned = 0.00566543 Jy ! Component: 2950 - total flux cleaned = 0.0057638 Jy ! Component: 3000 - total flux cleaned = 0.00595935 Jy ! Component: 3050 - total flux cleaned = 0.00615329 Jy ! Component: 3100 - total flux cleaned = 0.00624961 Jy ! Component: 3150 - total flux cleaned = 0.00637698 Jy ! Component: 3200 - total flux cleaned = 0.00650348 Jy ! Component: 3250 - total flux cleaned = 0.00666058 Jy ! Component: 3300 - total flux cleaned = 0.00687877 Jy ! Component: 3350 - total flux cleaned = 0.00706466 Jy ! Component: 3400 - total flux cleaned = 0.0072795 Jy ! Component: 3450 - total flux cleaned = 0.00734034 Jy ! Component: 3500 - total flux cleaned = 0.00758321 Jy ! Component: 3550 - total flux cleaned = 0.00773429 Jy ! Component: 3600 - total flux cleaned = 0.00791424 Jy ! Component: 3650 - total flux cleaned = 0.00800352 Jy ! Component: 3700 - total flux cleaned = 0.00821044 Jy ! Component: 3750 - total flux cleaned = 0.00829853 Jy ! Component: 3800 - total flux cleaned = 0.008532 Jy ! Component: 3850 - total flux cleaned = 0.00861901 Jy ! Component: 3900 - total flux cleaned = 0.00870548 Jy ! Component: 3950 - total flux cleaned = 0.00884879 Jy ! Component: 4000 - total flux cleaned = 0.00904828 Jy ! Component: 4050 - total flux cleaned = 0.00921821 Jy ! Total flux subtracted in 4096 components = 0.00930273 Jy ! Clean residual min=-0.001618 max=0.001636 Jy/beam ! Clean residual mean=0.000002 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.540163 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 453 components and 0.540163 Jy ![Exited script file: muppet] wmap "J1316-3338_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.46 x 17.78 at -20.64 degrees (North through East) ! Clean map min=-0.0050813 max=0.32871 Jy/beam ! Writing clean map to FITS file: J1316-3338_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.328712 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00052693 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.480904 0.480904 0.961808 1.92362 3.84723 7.69446 15.3889 30.7779 61.5557 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.328 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.46 x 17.78 at -20.64 degrees (North through East) ! Clean map min=-0.0050813 max=0.32871 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1316-3338_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:58:44 2019