! Started logfile: J1316-3338_S_2017_10_09_pus_uvs.log on Sun May 12 13:13:35 2019 obs J1316-3338_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1316-3338_S_2017_10_09_pus_uva.fits ! AN table 1: 39 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.581909 visibilities/baseline/integration-bin. ! Found source: J1316-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 3268 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1316-3338_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.844081Jy sigma=0.005696 ! Fit after self-cal, rms=0.790538Jy sigma=0.005351 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=12.2 mas, bpa=-16.3 degrees ! Estimated noise=2701.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15068 Jy ! Component: 100 - total flux cleaned = 0.225955 Jy ! Total flux subtracted in 100 components = 0.225955 Jy ! Clean residual min=-0.023165 max=0.049264 Jy/beam ! Clean residual mean=0.000211 rms=0.008476 Jy/beam ! Combined flux in latest and established models = 0.225955 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.225955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200890Jy sigma=0.001239 ! Fit after self-cal, rms=0.200151Jy sigma=0.001235 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=13.59 mas, bpa=-15.72 degrees ! Estimated noise=2070.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0907639 Jy ! Component: 100 - total flux cleaned = 0.146742 Jy ! Component: 150 - total flux cleaned = 0.182428 Jy ! Component: 200 - total flux cleaned = 0.205245 Jy ! Total flux subtracted in 200 components = 0.205245 Jy ! Clean residual min=-0.018847 max=0.041464 Jy/beam ! Clean residual mean=-0.000104 rms=0.007536 Jy/beam ! Combined flux in latest and established models = 0.4312 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 66 components and 0.4312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144091Jy sigma=0.000894 ! Fit after self-cal, rms=0.143244Jy sigma=0.000888 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 0.91 HN 2.06 KP 1.01 ! LA 0.94 MK 0.96 NL 1.05 OV 1.00* ! PT 0.91 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.09 FD 0.92 HN 1.76 KP 0.96 ! LA 0.91 MK 0.89 NL 1.23 OV 1.00* ! PT 0.87 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.59 FD 0.94 HN 1.76 KP 0.84 ! LA 0.69 MK 0.97 NL 1.41 OV 1.00* ! PT 0.88 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.44 KP 1.00* ! LA 0.90 MK 1.02 NL 1.00* OV 1.00* ! PT 0.94 ! ! ! Fit before self-cal, rms=0.143244Jy sigma=0.000888 ! Fit after self-cal, rms=0.160694Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.133 mas, bmaj=14.63 mas, bpa=-16.78 degrees ! Estimated noise=2271.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134056 Jy ! Component: 100 - total flux cleaned = -0.000385737 Jy ! Component: 150 - total flux cleaned = -0.00080826 Jy ! Component: 200 - total flux cleaned = -0.00115976 Jy ! Total flux subtracted in 200 components = -0.00115976 Jy ! Clean residual min=-0.010470 max=0.011220 Jy/beam ! Clean residual mean=-0.000124 rms=0.002512 Jy/beam ! Combined flux in latest and established models = 0.43004 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 0.43004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160039Jy sigma=0.000702 ! Fit after self-cal, rms=0.161267Jy sigma=0.000700 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161267Jy sigma=0.000700 ! Fit after self-cal, rms=0.173435Jy sigma=0.000686 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=14.71 mas, bpa=-16.5 degrees ! Estimated noise=2279.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000528384 Jy ! Component: 100 - total flux cleaned = -0.000521327 Jy ! Component: 150 - total flux cleaned = -0.000525443 Jy ! Component: 200 - total flux cleaned = -0.000519085 Jy ! Total flux subtracted in 200 components = -0.000519085 Jy ! Clean residual min=-0.009044 max=0.011035 Jy/beam ! Clean residual mean=-0.000058 rms=0.002253 Jy/beam ! Combined flux in latest and established models = 0.429521 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 87 components and 0.429521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173221Jy sigma=0.000684 ! Fit after self-cal, rms=0.173515Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678353 Jy ! Component: 100 - total flux cleaned = 0.00680553 Jy ! Component: 150 - total flux cleaned = 0.00699335 Jy ! Component: 200 - total flux cleaned = 0.00733309 Jy ! Total flux subtracted in 200 components = 0.00733309 Jy ! Clean residual min=-0.007736 max=0.007512 Jy/beam ! Clean residual mean=-0.000056 rms=0.002029 Jy/beam ! Combined flux in latest and established models = 0.436854 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 105 components and 0.436854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172497Jy sigma=0.000678 ! Fit after self-cal, rms=0.172377Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172377Jy sigma=0.000678 ! Fit after self-cal, rms=0.171990Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=14.53 mas, bpa=-16.46 degrees ! Estimated noise=2249.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430832 Jy ! Component: 100 - total flux cleaned = 0.00471058 Jy ! Component: 150 - total flux cleaned = 0.00482218 Jy ! Component: 200 - total flux cleaned = 0.00501686 Jy ! Total flux subtracted in 200 components = 0.00501686 Jy ! Clean residual min=-0.007078 max=0.006511 Jy/beam ! Clean residual mean=-0.000013 rms=0.001735 Jy/beam ! Combined flux in latest and established models = 0.441871 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 124 components and 0.441871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171683Jy sigma=0.000669 ! Fit after self-cal, rms=0.171780Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120383 Jy ! Component: 100 - total flux cleaned = 0.0012987 Jy ! Component: 150 - total flux cleaned = 0.00129976 Jy ! Component: 200 - total flux cleaned = 0.0012984 Jy ! Total flux subtracted in 200 components = 0.0012984 Jy ! Clean residual min=-0.007093 max=0.006422 Jy/beam ! Clean residual mean=-0.000012 rms=0.001719 Jy/beam ! Combined flux in latest and established models = 0.443169 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 134 components and 0.443169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171648Jy sigma=0.000668 ! Fit after self-cal, rms=0.171654Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171654Jy sigma=0.000668 ! Fit after self-cal, rms=0.171439Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.021 mas, bmaj=28.7 mas, bpa=-2.705 degrees ! Estimated noise=2822.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177458 Jy ! Component: 100 - total flux cleaned = 0.00158559 Jy ! Component: 150 - total flux cleaned = 0.00133636 Jy ! Component: 200 - total flux cleaned = 0.00121726 Jy ! Total flux subtracted in 200 components = 0.00121726 Jy ! Clean residual min=-0.007148 max=0.006091 Jy/beam ! Clean residual mean=-0.000025 rms=0.001985 Jy/beam ! Combined flux in latest and established models = 0.444386 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 143 components and 0.444386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171365Jy sigma=0.000667 ! Fit after self-cal, rms=0.171315Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000442346 Jy ! Component: 100 - total flux cleaned = 0.000353453 Jy ! Component: 150 - total flux cleaned = 0.000353641 Jy ! Component: 200 - total flux cleaned = 0.00035412 Jy ! Total flux subtracted in 200 components = 0.00035412 Jy ! Clean residual min=-0.007270 max=0.006182 Jy/beam ! Clean residual mean=-0.000023 rms=0.001985 Jy/beam ! Combined flux in latest and established models = 0.444741 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 150 components and 0.444741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171303Jy sigma=0.000667 ! Fit after self-cal, rms=0.171265Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=14.53 mas, bpa=-16.59 degrees ! Estimated noise=2243.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.073 x 14.53 at -16.59 degrees (North through East) ! Clean map min=-0.0098496 max=0.1848 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.523 mas, bmaj=12.59 mas, bpa=-16.98 degrees ! Estimated noise=2987.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.16344 Jy ! Component: 100 - total flux cleaned = 0.244419 Jy ! Component: 150 - total flux cleaned = 0.296809 Jy ! Component: 200 - total flux cleaned = 0.331937 Jy ! Total flux subtracted in 200 components = 0.331937 Jy ! Clean residual min=-0.012620 max=0.022325 Jy/beam ! Clean residual mean=0.000072 rms=0.004150 Jy/beam ! Combined flux in latest and established models = 0.331937 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 55 model components to the UV plane model. ! The established model now contains 55 components and 0.331937 Jy ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=14.53 mas, bpa=-16.59 degrees ! Estimated noise=2243.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392724 Jy ! Component: 100 - total flux cleaned = 0.0621395 Jy ! Component: 150 - total flux cleaned = 0.0776437 Jy ! Component: 200 - total flux cleaned = 0.0881792 Jy ! Total flux subtracted in 200 components = 0.0881792 Jy ! Clean residual min=-0.007655 max=0.009220 Jy/beam ! Clean residual mean=-0.000012 rms=0.002159 Jy/beam ! Combined flux in latest and established models = 0.420116 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 106 components and 0.420116 Jy ! Inverting map ! Added new window around map position (5.5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00799129 Jy ! Component: 100 - total flux cleaned = 0.0121615 Jy ! Component: 150 - total flux cleaned = 0.0155059 Jy ! Component: 200 - total flux cleaned = 0.0178751 Jy ! Total flux subtracted in 200 components = 0.0178751 Jy ! Clean residual min=-0.007152 max=0.005812 Jy/beam ! Clean residual mean=-0.000009 rms=0.001644 Jy/beam ! Combined flux in latest and established models = 0.437991 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 134 components and 0.437991 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.021 mas, bmaj=28.7 mas, bpa=-2.705 degrees ! Estimated noise=2822.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343219 Jy ! Component: 100 - total flux cleaned = 0.003763 Jy ! Component: 150 - total flux cleaned = 0.00376335 Jy ! Component: 200 - total flux cleaned = 0.00384589 Jy ! Total flux subtracted in 200 components = 0.00384589 Jy ! Clean residual min=-0.006608 max=0.006183 Jy/beam ! Clean residual mean=-0.000016 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 0.441837 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.55902e-06 Jy ! Component: 100 - total flux cleaned = -7.33023e-05 Jy ! Component: 150 - total flux cleaned = -1.12512e-05 Jy ! Component: 200 - total flux cleaned = -1.32314e-05 Jy ! Total flux subtracted in 200 components = -1.32314e-05 Jy ! Clean residual min=-0.006510 max=0.006161 Jy/beam ! Clean residual mean=-0.000015 rms=0.001844 Jy/beam ! Combined flux in latest and established models = 0.441824 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 179 components and 0.441824 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=14.53 mas, bpa=-16.59 degrees ! Estimated noise=2243.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.68532e-05 Jy ! Component: 100 - total flux cleaned = 7.8745e-06 Jy ! Component: 150 - total flux cleaned = 0.000205513 Jy ! Component: 200 - total flux cleaned = 0.000204055 Jy ! Total flux subtracted in 200 components = 0.000204055 Jy ! Clean residual min=-0.006856 max=0.005782 Jy/beam ! Clean residual mean=-0.000011 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 0.442028 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 201 components and 0.442028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171087Jy sigma=0.000665 ! Fit after self-cal, rms=0.170923Jy sigma=0.000664 wmodel J1316-3338_S_2017_10_09_pus_map.mod ! Writing 201 model components to file: J1316-3338_S_2017_10_09_pus_map.mod wobs J1316-3338_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1316-3338_S_2017_10_09_pus_uvs.fits wwins J1316-3338_S_2017_10_09_pus_map.win ! wwins: Wrote 4 windows to J1316-3338_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000837385 Jy ! Component: 100 - total flux cleaned = -0.000629962 Jy ! Component: 150 - total flux cleaned = -0.000151833 Jy ! Component: 200 - total flux cleaned = -0.000336263 Jy ! Component: 250 - total flux cleaned = -0.000422068 Jy ! Component: 300 - total flux cleaned = -0.00067652 Jy ! Component: 350 - total flux cleaned = -0.00100528 Jy ! Component: 400 - total flux cleaned = -0.00140595 Jy ! Component: 450 - total flux cleaned = -0.00163945 Jy ! Component: 500 - total flux cleaned = -0.00186786 Jy ! Component: 550 - total flux cleaned = -0.0020143 Jy ! Component: 600 - total flux cleaned = -0.00230217 Jy ! Component: 650 - total flux cleaned = -0.00251259 Jy ! Component: 700 - total flux cleaned = -0.00278531 Jy ! Component: 750 - total flux cleaned = -0.00298617 Jy ! Component: 800 - total flux cleaned = -0.00305161 Jy ! Component: 850 - total flux cleaned = -0.00343658 Jy ! Component: 900 - total flux cleaned = -0.00362513 Jy ! Component: 950 - total flux cleaned = -0.00387158 Jy ! Component: 1000 - total flux cleaned = -0.0038738 Jy ! Component: 1050 - total flux cleaned = -0.00423112 Jy ! Component: 1100 - total flux cleaned = -0.00429019 Jy ! Component: 1150 - total flux cleaned = -0.00451947 Jy ! Component: 1200 - total flux cleaned = -0.00452025 Jy ! Component: 1250 - total flux cleaned = -0.00468674 Jy ! Component: 1300 - total flux cleaned = -0.00463367 Jy ! Component: 1350 - total flux cleaned = -0.00474211 Jy ! Component: 1400 - total flux cleaned = -0.00490172 Jy ! Component: 1450 - total flux cleaned = -0.0050051 Jy ! Component: 1500 - total flux cleaned = -0.00510764 Jy ! Component: 1550 - total flux cleaned = -0.00536203 Jy ! Component: 1600 - total flux cleaned = -0.00556332 Jy ! Component: 1650 - total flux cleaned = -0.00571233 Jy ! Component: 1700 - total flux cleaned = -0.00615281 Jy ! Component: 1750 - total flux cleaned = -0.00644238 Jy ! Component: 1800 - total flux cleaned = -0.00653652 Jy ! Component: 1850 - total flux cleaned = -0.00653583 Jy ! Component: 1900 - total flux cleaned = -0.00672254 Jy ! Component: 1950 - total flux cleaned = -0.00690659 Jy ! Component: 2000 - total flux cleaned = -0.00699741 Jy ! Component: 2050 - total flux cleaned = -0.00722168 Jy ! Component: 2100 - total flux cleaned = -0.00731011 Jy ! Component: 2150 - total flux cleaned = -0.00748537 Jy ! Component: 2200 - total flux cleaned = -0.0076162 Jy ! Component: 2250 - total flux cleaned = -0.00778925 Jy ! Component: 2300 - total flux cleaned = -0.00795957 Jy ! Component: 2350 - total flux cleaned = -0.00816989 Jy ! Component: 2400 - total flux cleaned = -0.00825322 Jy ! Component: 2450 - total flux cleaned = -0.00845946 Jy ! Component: 2500 - total flux cleaned = -0.00845978 Jy ! Component: 2550 - total flux cleaned = -0.00854082 Jy ! Component: 2600 - total flux cleaned = -0.00870082 Jy ! Component: 2650 - total flux cleaned = -0.00885946 Jy ! Component: 2700 - total flux cleaned = -0.00893798 Jy ! Component: 2750 - total flux cleaned = -0.00897661 Jy ! Component: 2800 - total flux cleaned = -0.00901497 Jy ! Component: 2850 - total flux cleaned = -0.00912918 Jy ! Component: 2900 - total flux cleaned = -0.00909116 Jy ! Component: 2950 - total flux cleaned = -0.00927802 Jy ! Component: 3000 - total flux cleaned = -0.00920395 Jy ! Component: 3050 - total flux cleaned = -0.00927716 Jy ! Component: 3100 - total flux cleaned = -0.00920448 Jy ! Component: 3150 - total flux cleaned = -0.00931237 Jy ! Component: 3200 - total flux cleaned = -0.00934794 Jy ! Component: 3250 - total flux cleaned = -0.00927718 Jy ! Component: 3300 - total flux cleaned = -0.00938237 Jy ! Component: 3350 - total flux cleaned = -0.00945199 Jy ! Component: 3400 - total flux cleaned = -0.00952119 Jy ! Component: 3450 - total flux cleaned = -0.00958933 Jy ! Component: 3500 - total flux cleaned = -0.00935043 Jy ! Component: 3550 - total flux cleaned = -0.00941837 Jy ! Component: 3600 - total flux cleaned = -0.00941839 Jy ! Component: 3650 - total flux cleaned = -0.00951796 Jy ! Component: 3700 - total flux cleaned = -0.00961705 Jy ! Component: 3750 - total flux cleaned = -0.00958397 Jy ! Component: 3800 - total flux cleaned = -0.00964895 Jy ! Component: 3850 - total flux cleaned = -0.00964896 Jy ! Component: 3900 - total flux cleaned = -0.00974529 Jy ! Component: 3950 - total flux cleaned = -0.00971365 Jy ! Component: 4000 - total flux cleaned = -0.0097136 Jy ! Component: 4050 - total flux cleaned = -0.0097766 Jy ! Total flux subtracted in 4096 components = -0.00977654 Jy ! Clean residual min=-0.001751 max=0.001832 Jy/beam ! Clean residual mean=0.000000 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.432252 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 491 components and 0.432252 Jy ![Exited script file: muppet] wmap "J1316-3338_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.073 x 14.53 at -16.59 degrees (North through East) ! Clean map min=-0.007964 max=0.20737 Jy/beam ! Writing clean map to FITS file: J1316-3338_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.207369 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000584158 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.845099 0.845099 1.6902 3.3804 6.76079 13.5216 27.0432 54.0863 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.207 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.073 x 14.53 at -16.59 degrees (North through East) ! Clean map min=-0.007964 max=0.20737 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1316-3338_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:13:40 2019