! Started logfile: J1316-3338_S_2017_06_10_pus_uvs.log on Mon May 6 14:54:08 2019 obs J1316-3338_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1316-3338_S_2017_06_10_pus_uva.fits ! AN table 1: 93 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.639665 visibilities/baseline/integration-bin. ! Found source: J1316-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 10708 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1316-3338_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 274 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 350 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 254 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 742 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.721990Jy sigma=0.004960 ! Fit after self-cal, rms=0.697070Jy sigma=0.004802 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=7.293 mas, bpa=-0.5641 degrees ! Estimated noise=1810.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.20633 Jy ! Component: 100 - total flux cleaned = 0.295272 Jy ! Total flux subtracted in 100 components = 0.295272 Jy ! Clean residual min=-0.018201 max=0.043832 Jy/beam ! Clean residual mean=0.000161 rms=0.005568 Jy/beam ! Combined flux in latest and established models = 0.295272 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.295272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199662Jy sigma=0.001391 ! Fit after self-cal, rms=0.198825Jy sigma=0.001386 ! Inverting map ! Added new window around map position (-2.5, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0527291 Jy ! Component: 100 - total flux cleaned = 0.0853118 Jy ! Total flux subtracted in 100 components = 0.0853118 Jy ! Clean residual min=-0.014882 max=0.033722 Jy/beam ! Clean residual mean=0.000083 rms=0.004368 Jy/beam ! Combined flux in latest and established models = 0.380584 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.380584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161441Jy sigma=0.001112 ! Fit after self-cal, rms=0.160942Jy sigma=0.001109 ! Inverting map ! Added new window around map position (-4, 14). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287844 Jy ! Component: 100 - total flux cleaned = 0.0481428 Jy ! Total flux subtracted in 100 components = 0.0481428 Jy ! Clean residual min=-0.014145 max=0.025867 Jy/beam ! Clean residual mean=0.000044 rms=0.003890 Jy/beam ! Combined flux in latest and established models = 0.428726 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 52 components and 0.428726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147002Jy sigma=0.001004 ! Fit after self-cal, rms=0.146249Jy sigma=0.000999 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=8.552 mas, bpa=-0.1029 degrees ! Estimated noise=1312.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0509995 Jy ! Component: 100 - total flux cleaned = 0.0784148 Jy ! Component: 150 - total flux cleaned = 0.0949712 Jy ! Component: 200 - total flux cleaned = 0.105296 Jy ! Total flux subtracted in 200 components = 0.105296 Jy ! Clean residual min=-0.009782 max=0.019689 Jy/beam ! Clean residual mean=0.000091 rms=0.003290 Jy/beam ! Combined flux in latest and established models = 0.534022 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 90 components and 0.534022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128462Jy sigma=0.000864 ! Fit after self-cal, rms=0.128042Jy sigma=0.000861 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.02 FD 0.89 HN 1.00* KP 1.00 ! LA 0.98 MK 0.97 NL 1.03 OV 0.98 ! PT 0.97 SC 0.90 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 0.95 ! LA 0.94 MK 0.98 NL 1.16 OV 1.00 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.59 KP 0.95 ! LA 0.94 MK 1.02 NL 1.16 OV 0.92 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 4. ! A total of 96 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 1.00* ! LA 0.95 MK 1.07 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.128042Jy sigma=0.000861 ! Fit after self-cal, rms=0.129991Jy sigma=0.000722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=8.52 mas, bpa=0.6115 degrees ! Estimated noise=1323.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000625355 Jy ! Component: 100 - total flux cleaned = -0.000754097 Jy ! Component: 150 - total flux cleaned = -0.000985496 Jy ! Component: 200 - total flux cleaned = -0.00129155 Jy ! Total flux subtracted in 200 components = -0.00129155 Jy ! Clean residual min=-0.007524 max=0.008352 Jy/beam ! Clean residual mean=0.000092 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 0.53273 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 103 components and 0.53273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129792Jy sigma=0.000720 ! Fit after self-cal, rms=0.130279Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130279Jy sigma=0.000719 ! Fit after self-cal, rms=0.138023Jy sigma=0.000702 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=8.435 mas, bpa=0.8838 degrees ! Estimated noise=1319.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.77811e-06 Jy ! Component: 100 - total flux cleaned = -0.000249808 Jy ! Component: 150 - total flux cleaned = -0.000360129 Jy ! Component: 200 - total flux cleaned = -0.00036278 Jy ! Total flux subtracted in 200 components = -0.00036278 Jy ! Clean residual min=-0.006191 max=0.008306 Jy/beam ! Clean residual mean=0.000099 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.532368 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 109 components and 0.532368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137757Jy sigma=0.000701 ! Fit after self-cal, rms=0.137982Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00773006 Jy ! Component: 100 - total flux cleaned = 0.00866204 Jy ! Component: 150 - total flux cleaned = 0.00894723 Jy ! Component: 200 - total flux cleaned = 0.00920674 Jy ! Total flux subtracted in 200 components = 0.00920674 Jy ! Clean residual min=-0.005601 max=0.006108 Jy/beam ! Clean residual mean=0.000097 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 0.541574 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 126 components and 0.541574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137427Jy sigma=0.000696 ! Fit after self-cal, rms=0.137355Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137355Jy sigma=0.000695 ! Fit after self-cal, rms=0.138355Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=8.369 mas, bpa=1.069 degrees ! Estimated noise=1306.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141943 Jy ! Component: 100 - total flux cleaned = 0.00155415 Jy ! Component: 150 - total flux cleaned = 0.00177226 Jy ! Component: 200 - total flux cleaned = 0.001867 Jy ! Total flux subtracted in 200 components = 0.001867 Jy ! Clean residual min=-0.004526 max=0.005001 Jy/beam ! Clean residual mean=0.000008 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.543441 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 145 components and 0.543441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138094Jy sigma=0.000672 ! Fit after self-cal, rms=0.138063Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, -28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383664 Jy ! Component: 100 - total flux cleaned = 0.00404956 Jy ! Component: 150 - total flux cleaned = 0.00395671 Jy ! Component: 200 - total flux cleaned = 0.00395863 Jy ! Total flux subtracted in 200 components = 0.00395863 Jy ! Clean residual min=-0.004139 max=0.004198 Jy/beam ! Clean residual mean=0.000006 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.5474 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 174 components and 0.5474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137845Jy sigma=0.000671 ! Fit after self-cal, rms=0.137837Jy sigma=0.000670 ! Inverting map ! Added new window around map position (14.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146866 Jy ! Component: 100 - total flux cleaned = 0.00167 Jy ! Component: 150 - total flux cleaned = 0.00167292 Jy ! Component: 200 - total flux cleaned = 0.00175897 Jy ! Total flux subtracted in 200 components = 0.00175897 Jy ! Clean residual min=-0.003648 max=0.004003 Jy/beam ! Clean residual mean=0.000005 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.549159 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 199 components and 0.549159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137618Jy sigma=0.000669 ! Fit after self-cal, rms=0.137593Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137593Jy sigma=0.000669 ! Fit after self-cal, rms=0.137532Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.006 mas, bmaj=24.69 mas, bpa=2.526 degrees ! Estimated noise=1654.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101924 Jy ! Component: 100 - total flux cleaned = 0.00179025 Jy ! Component: 150 - total flux cleaned = 0.00247167 Jy ! Component: 200 - total flux cleaned = 0.00278607 Jy ! Total flux subtracted in 200 components = 0.00278607 Jy ! Clean residual min=-0.003290 max=0.003211 Jy/beam ! Clean residual mean=0.000023 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.551945 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 219 components and 0.551945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137443Jy sigma=0.000668 ! Fit after self-cal, rms=0.137404Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024384 Jy ! Component: 100 - total flux cleaned = -0.00018484 Jy ! Component: 150 - total flux cleaned = -0.000134159 Jy ! Component: 200 - total flux cleaned = -8.73349e-05 Jy ! Total flux subtracted in 200 components = -8.73349e-05 Jy ! Clean residual min=-0.003294 max=0.003153 Jy/beam ! Clean residual mean=0.000023 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.551857 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 226 components and 0.551857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137363Jy sigma=0.000668 ! Fit after self-cal, rms=0.137338Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=8.357 mas, bpa=1.149 degrees ! Estimated noise=1301.5 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.214 x 8.357 at 1.149 degrees (North through East) ! Clean map min=-0.0043289 max=0.2711 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.582 mas, bmaj=7.002 mas, bpa=0.5053 degrees ! Estimated noise=1868.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.220005 Jy ! Component: 100 - total flux cleaned = 0.322957 Jy ! Component: 150 - total flux cleaned = 0.382367 Jy ! Component: 200 - total flux cleaned = 0.419643 Jy ! Total flux subtracted in 200 components = 0.419643 Jy ! Clean residual min=-0.008552 max=0.020319 Jy/beam ! Clean residual mean=0.000081 rms=0.002516 Jy/beam ! Combined flux in latest and established models = 0.419643 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.419643 Jy ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=8.357 mas, bpa=1.149 degrees ! Estimated noise=1301.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0454046 Jy ! Component: 100 - total flux cleaned = 0.0703311 Jy ! Component: 150 - total flux cleaned = 0.0863482 Jy ! Component: 200 - total flux cleaned = 0.0971158 Jy ! Total flux subtracted in 200 components = 0.0971158 Jy ! Clean residual min=-0.005241 max=0.007307 Jy/beam ! Clean residual mean=0.000039 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 0.516759 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 90 components and 0.516759 Jy ! Inverting map ! Added new window around map position (-7, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00795033 Jy ! Component: 100 - total flux cleaned = 0.0138106 Jy ! Component: 150 - total flux cleaned = 0.0184447 Jy ! Component: 200 - total flux cleaned = 0.021888 Jy ! Total flux subtracted in 200 components = 0.021888 Jy ! Clean residual min=-0.003982 max=0.004450 Jy/beam ! Clean residual mean=0.000021 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.538647 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 124 components and 0.538646 Jy ! Inverting map ! Added new window around map position (4, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283597 Jy ! Component: 100 - total flux cleaned = 0.00448403 Jy ! Component: 150 - total flux cleaned = 0.00559662 Jy ! Component: 200 - total flux cleaned = 0.00622541 Jy ! Total flux subtracted in 200 components = 0.00622541 Jy ! Clean residual min=-0.003329 max=0.003510 Jy/beam ! Clean residual mean=0.000016 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.544872 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 151 components and 0.544872 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.006 mas, bmaj=24.69 mas, bpa=2.526 degrees ! Estimated noise=1654.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210753 Jy ! Component: 100 - total flux cleaned = 0.00277009 Jy ! Component: 150 - total flux cleaned = 0.00316004 Jy ! Component: 200 - total flux cleaned = 0.0035705 Jy ! Total flux subtracted in 200 components = 0.0035705 Jy ! Clean residual min=-0.003814 max=0.003213 Jy/beam ! Clean residual mean=0.000026 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.548442 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215034 Jy ! Component: 100 - total flux cleaned = 0.000415038 Jy ! Component: 150 - total flux cleaned = 0.000602653 Jy ! Component: 200 - total flux cleaned = 0.000736454 Jy ! Total flux subtracted in 200 components = 0.000736454 Jy ! Clean residual min=-0.003746 max=0.003158 Jy/beam ! Clean residual mean=0.000025 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.549179 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 187 components and 0.549179 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=8.357 mas, bpa=1.149 degrees ! Estimated noise=1301.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000895256 Jy ! Component: 100 - total flux cleaned = -0.000678517 Jy ! Component: 150 - total flux cleaned = -0.000801901 Jy ! Component: 200 - total flux cleaned = -0.000800662 Jy ! Total flux subtracted in 200 components = -0.000800662 Jy ! Clean residual min=-0.003028 max=0.003392 Jy/beam ! Clean residual mean=0.000013 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.548378 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 206 components and 0.548378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136981Jy sigma=0.000666 ! Fit after self-cal, rms=0.136889Jy sigma=0.000666 wmodel J1316-3338_S_2017_06_10_pus_map.mod ! Writing 206 model components to file: J1316-3338_S_2017_06_10_pus_map.mod wobs J1316-3338_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1316-3338_S_2017_06_10_pus_uvs.fits wwins J1316-3338_S_2017_06_10_pus_map.win ! wwins: Wrote 8 windows to J1316-3338_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000929045 Jy ! Component: 100 - total flux cleaned = 0.00121021 Jy ! Component: 150 - total flux cleaned = 0.00152626 Jy ! Component: 200 - total flux cleaned = 0.00177987 Jy ! Component: 250 - total flux cleaned = 0.00192662 Jy ! Component: 300 - total flux cleaned = 0.00221175 Jy ! Component: 350 - total flux cleaned = 0.00244443 Jy ! Component: 400 - total flux cleaned = 0.00267284 Jy ! Component: 450 - total flux cleaned = 0.00289677 Jy ! Component: 500 - total flux cleaned = 0.00320465 Jy ! Component: 550 - total flux cleaned = 0.00342069 Jy ! Component: 600 - total flux cleaned = 0.00367506 Jy ! Component: 650 - total flux cleaned = 0.00392481 Jy ! Component: 700 - total flux cleaned = 0.00417142 Jy ! Component: 750 - total flux cleaned = 0.00433326 Jy ! Component: 800 - total flux cleaned = 0.00465292 Jy ! Component: 850 - total flux cleaned = 0.00481039 Jy ! Component: 900 - total flux cleaned = 0.00500573 Jy ! Component: 950 - total flux cleaned = 0.00523682 Jy ! Component: 1000 - total flux cleaned = 0.00550273 Jy ! Component: 1050 - total flux cleaned = 0.00572865 Jy ! Component: 1100 - total flux cleaned = 0.00591454 Jy ! Component: 1150 - total flux cleaned = 0.00613584 Jy ! Component: 1200 - total flux cleaned = 0.00631859 Jy ! Component: 1250 - total flux cleaned = 0.00667915 Jy ! Component: 1300 - total flux cleaned = 0.00678584 Jy ! Component: 1350 - total flux cleaned = 0.00703368 Jy ! Component: 1400 - total flux cleaned = 0.0072787 Jy ! Component: 1450 - total flux cleaned = 0.00738294 Jy ! Component: 1500 - total flux cleaned = 0.00762343 Jy ! Component: 1550 - total flux cleaned = 0.0077936 Jy ! Component: 1600 - total flux cleaned = 0.00796171 Jy ! Component: 1650 - total flux cleaned = 0.00809556 Jy ! Component: 1700 - total flux cleaned = 0.00816184 Jy ! Component: 1750 - total flux cleaned = 0.00839185 Jy ! Component: 1800 - total flux cleaned = 0.00848975 Jy ! Component: 1850 - total flux cleaned = 0.00855452 Jy ! Component: 1900 - total flux cleaned = 0.00868315 Jy ! Component: 1950 - total flux cleaned = 0.00874675 Jy ! Component: 2000 - total flux cleaned = 0.00880976 Jy ! Component: 2050 - total flux cleaned = 0.00896641 Jy ! Component: 2100 - total flux cleaned = 0.00902822 Jy ! Component: 2150 - total flux cleaned = 0.0089662 Jy ! Component: 2200 - total flux cleaned = 0.00902791 Jy ! Component: 2250 - total flux cleaned = 0.0092112 Jy ! Component: 2300 - total flux cleaned = 0.0092416 Jy ! Component: 2350 - total flux cleaned = 0.00933179 Jy ! Component: 2400 - total flux cleaned = 0.00927181 Jy ! Component: 2450 - total flux cleaned = 0.00936101 Jy ! Component: 2500 - total flux cleaned = 0.00947907 Jy ! Component: 2550 - total flux cleaned = 0.00944958 Jy ! Component: 2600 - total flux cleaned = 0.00953706 Jy ! Component: 2650 - total flux cleaned = 0.00950801 Jy ! Component: 2700 - total flux cleaned = 0.00947929 Jy ! Component: 2750 - total flux cleaned = 0.00956539 Jy ! Component: 2800 - total flux cleaned = 0.00947985 Jy ! Component: 2850 - total flux cleaned = 0.00945163 Jy ! Component: 2900 - total flux cleaned = 0.00950788 Jy ! Component: 2950 - total flux cleaned = 0.00947979 Jy ! Component: 3000 - total flux cleaned = 0.00934051 Jy ! Component: 3050 - total flux cleaned = 0.00939576 Jy ! Component: 3100 - total flux cleaned = 0.00942313 Jy ! Component: 3150 - total flux cleaned = 0.00925856 Jy ! Component: 3200 - total flux cleaned = 0.00923123 Jy ! Component: 3250 - total flux cleaned = 0.00928571 Jy ! Component: 3300 - total flux cleaned = 0.00923152 Jy ! Component: 3350 - total flux cleaned = 0.00931212 Jy ! Component: 3400 - total flux cleaned = 0.00917806 Jy ! Component: 3450 - total flux cleaned = 0.00923145 Jy ! Component: 3500 - total flux cleaned = 0.00923148 Jy ! Component: 3550 - total flux cleaned = 0.00917884 Jy ! Component: 3600 - total flux cleaned = 0.00917877 Jy ! Component: 3650 - total flux cleaned = 0.00910037 Jy ! Component: 3700 - total flux cleaned = 0.0090743 Jy ! Component: 3750 - total flux cleaned = 0.00912638 Jy ! Component: 3800 - total flux cleaned = 0.00910068 Jy ! Component: 3850 - total flux cleaned = 0.009075 Jy ! Component: 3900 - total flux cleaned = 0.0091007 Jy ! Component: 3950 - total flux cleaned = 0.00904998 Jy ! Component: 4000 - total flux cleaned = 0.00905008 Jy ! Component: 4050 - total flux cleaned = 0.00899956 Jy ! Total flux subtracted in 4096 components = 0.00902462 Jy ! Clean residual min=-0.001386 max=0.001345 Jy/beam ! Clean residual mean=-0.000003 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.557403 Jy keep ! Adding 347 model components to the UV plane model. ! The established model now contains 553 components and 0.557403 Jy ![Exited script file: muppet] wmap "J1316-3338_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.214 x 8.357 at 1.149 degrees (North through East) ! Clean map min=-0.0037449 max=0.2877 Jy/beam ! Writing clean map to FITS file: J1316-3338_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.287704 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000484276 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.504973 0.504973 1.00995 2.01989 4.03979 8.07957 16.1591 32.3183 64.6366 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.287 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.214 x 8.357 at 1.149 degrees (North through East) ! Clean map min=-0.0037449 max=0.2877 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1316-3338_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:54:13 2019