! Started logfile: J1316-3338_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:49:30 2019 obs J1316-3338_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1316-3338_S_2017_05_31_pus_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.564444 visibilities/baseline/integration-bin. ! Found source: J1316-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 6096 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1316-3338_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 362 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.813644Jy sigma=0.004273 ! Fit after self-cal, rms=0.798698Jy sigma=0.004213 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.671 mas, bpa=1.457 degrees ! Estimated noise=2418.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214276 Jy ! Component: 100 - total flux cleaned = 0.311612 Jy ! Total flux subtracted in 100 components = 0.311612 Jy ! Clean residual min=-0.015198 max=0.048693 Jy/beam ! Clean residual mean=0.000310 rms=0.006024 Jy/beam ! Combined flux in latest and established models = 0.311612 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.311612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.503983Jy sigma=0.001136 ! Fit after self-cal, rms=0.503773Jy sigma=0.001133 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0592917 Jy ! Component: 100 - total flux cleaned = 0.0971946 Jy ! Total flux subtracted in 100 components = 0.0971946 Jy ! Clean residual min=-0.013826 max=0.033377 Jy/beam ! Clean residual mean=0.000102 rms=0.004299 Jy/beam ! Combined flux in latest and established models = 0.408807 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 44 components and 0.408807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.482539Jy sigma=0.000894 ! Fit after self-cal, rms=0.482489Jy sigma=0.000893 ! Inverting map ! Added new window around map position (-5.5, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334562 Jy ! Component: 100 - total flux cleaned = 0.0560673 Jy ! Total flux subtracted in 100 components = 0.0560673 Jy ! Clean residual min=-0.013035 max=0.024544 Jy/beam ! Clean residual mean=-0.000012 rms=0.003634 Jy/beam ! Combined flux in latest and established models = 0.464874 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 68 components and 0.464874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.474557Jy sigma=0.000812 ! Fit after self-cal, rms=0.474286Jy sigma=0.000807 ! Inverting map ! Added new window around map position (-6.5, -8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227738 Jy ! Component: 100 - total flux cleaned = 0.038671 Jy ! Total flux subtracted in 100 components = 0.038671 Jy ! Clean residual min=-0.014519 max=0.017426 Jy/beam ! Clean residual mean=-0.000090 rms=0.003247 Jy/beam ! Combined flux in latest and established models = 0.503545 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.503545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.469801Jy sigma=0.000777 ! Fit after self-cal, rms=0.469654Jy sigma=0.000774 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.581 mas, bmaj=9.966 mas, bpa=3.584 degrees ! Estimated noise=1788.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020393 Jy ! Component: 100 - total flux cleaned = 0.0327155 Jy ! Component: 150 - total flux cleaned = 0.0406952 Jy ! Component: 200 - total flux cleaned = 0.0458892 Jy ! Total flux subtracted in 200 components = 0.0458892 Jy ! Clean residual min=-0.013441 max=0.012933 Jy/beam ! Clean residual mean=-0.000273 rms=0.002820 Jy/beam ! Combined flux in latest and established models = 0.549434 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 122 components and 0.549434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.465295Jy sigma=0.000762 ! Fit after self-cal, rms=0.465240Jy sigma=0.000761 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 0.94 HN 1.21 KP 1.01 ! LA 0.99 MK 0.96 NL 0.98 OV 1.03 ! PT 1.01 SC 0.90 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.31 KP 0.98 ! LA 0.98 MK 0.98 NL 1.10 OV 1.03 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.01 HN 1.41 KP 1.03 ! LA 0.98 MK 0.92 NL 1.04 OV 0.93 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.97 KP 1.14 ! LA 1.00 MK 1.09 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.465240Jy sigma=0.000761 ! Fit after self-cal, rms=0.596161Jy sigma=0.000733 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=9.821 mas, bpa=4.197 degrees ! Estimated noise=1829 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00810938 Jy ! Component: 100 - total flux cleaned = 0.0109831 Jy ! Component: 150 - total flux cleaned = 0.0117628 Jy ! Component: 200 - total flux cleaned = 0.0118721 Jy ! Total flux subtracted in 200 components = 0.0118721 Jy ! Clean residual min=-0.012385 max=0.007162 Jy/beam ! Clean residual mean=-0.000290 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 0.561306 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 140 components and 0.561306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.595013Jy sigma=0.000733 ! Fit after self-cal, rms=0.595083Jy sigma=0.000732 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.595083Jy sigma=0.000732 ! Fit after self-cal, rms=0.526676Jy sigma=0.000706 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=9.867 mas, bpa=4.494 degrees ! Estimated noise=1834.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00505356 Jy ! Component: 100 - total flux cleaned = 0.00742365 Jy ! Component: 150 - total flux cleaned = 0.00782526 Jy ! Component: 200 - total flux cleaned = 0.00809503 Jy ! Total flux subtracted in 200 components = 0.00809503 Jy ! Clean residual min=-0.010043 max=0.006218 Jy/beam ! Clean residual mean=-0.000045 rms=0.002047 Jy/beam ! Combined flux in latest and established models = 0.569402 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 153 components and 0.569402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.526037Jy sigma=0.000706 ! Fit after self-cal, rms=0.526066Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0005159 Jy ! Component: 100 - total flux cleaned = 0.000581444 Jy ! Component: 150 - total flux cleaned = 0.000584536 Jy ! Component: 200 - total flux cleaned = 0.000585672 Jy ! Total flux subtracted in 200 components = 0.000585672 Jy ! Clean residual min=-0.010074 max=0.006135 Jy/beam ! Clean residual mean=-0.000048 rms=0.002044 Jy/beam ! Combined flux in latest and established models = 0.569987 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 160 components and 0.569987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.525998Jy sigma=0.000706 ! Fit after self-cal, rms=0.526008Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.526008Jy sigma=0.000706 ! Fit after self-cal, rms=0.184980Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=9.836 mas, bpa=4.494 degrees ! Estimated noise=1832.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129945 Jy ! Component: 100 - total flux cleaned = -0.00136321 Jy ! Component: 150 - total flux cleaned = -0.00142142 Jy ! Component: 200 - total flux cleaned = -0.00147476 Jy ! Total flux subtracted in 200 components = -0.00147476 Jy ! Clean residual min=-0.005752 max=0.005925 Jy/beam ! Clean residual mean=0.000022 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.568512 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 170 components and 0.568513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184911Jy sigma=0.000662 ! Fit after self-cal, rms=0.185126Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392811 Jy ! Component: 100 - total flux cleaned = -0.000443703 Jy ! Component: 150 - total flux cleaned = -0.000490143 Jy ! Component: 200 - total flux cleaned = -0.000489418 Jy ! Total flux subtracted in 200 components = -0.000489418 Jy ! Clean residual min=-0.005742 max=0.005736 Jy/beam ! Clean residual mean=0.000023 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.568023 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 174 components and 0.568023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185085Jy sigma=0.000661 ! Fit after self-cal, rms=0.185105Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185105Jy sigma=0.000661 ! Fit after self-cal, rms=0.186050Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.024 mas, bmaj=23.09 mas, bpa=1.527 degrees ! Estimated noise=2238.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000641128 Jy ! Component: 100 - total flux cleaned = -0.000727929 Jy ! Component: 150 - total flux cleaned = -0.000729428 Jy ! Component: 200 - total flux cleaned = -0.000760131 Jy ! Total flux subtracted in 200 components = -0.000760131 Jy ! Clean residual min=-0.006986 max=0.005174 Jy/beam ! Clean residual mean=0.000040 rms=0.001490 Jy/beam ! Combined flux in latest and established models = 0.567263 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 180 components and 0.567263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186014Jy sigma=0.000661 ! Fit after self-cal, rms=0.186077Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.77561e-05 Jy ! Component: 100 - total flux cleaned = -0.000134248 Jy ! Component: 150 - total flux cleaned = -0.000130875 Jy ! Component: 200 - total flux cleaned = -0.000131027 Jy ! Total flux subtracted in 200 components = -0.000131027 Jy ! Clean residual min=-0.006998 max=0.005080 Jy/beam ! Clean residual mean=0.000041 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.567132 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 186 components and 0.567132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186049Jy sigma=0.000661 ! Fit after self-cal, rms=0.186079Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=9.826 mas, bpa=4.559 degrees ! Estimated noise=1830.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.494 x 9.826 at 4.559 degrees (North through East) ! Clean map min=-0.005861 max=0.28525 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=7.579 mas, bpa=2.802 degrees ! Estimated noise=2445.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218614 Jy ! Component: 100 - total flux cleaned = 0.321114 Jy ! Component: 150 - total flux cleaned = 0.382376 Jy ! Component: 200 - total flux cleaned = 0.422841 Jy ! Total flux subtracted in 200 components = 0.422841 Jy ! Clean residual min=-0.009938 max=0.022490 Jy/beam ! Clean residual mean=0.000261 rms=0.003348 Jy/beam ! Combined flux in latest and established models = 0.422841 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.422841 Jy ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=9.826 mas, bpa=4.559 degrees ! Estimated noise=1830.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0531319 Jy ! Component: 100 - total flux cleaned = 0.0842521 Jy ! Component: 150 - total flux cleaned = 0.103918 Jy ! Component: 200 - total flux cleaned = 0.1167 Jy ! Total flux subtracted in 200 components = 0.1167 Jy ! Clean residual min=-0.006467 max=0.007248 Jy/beam ! Clean residual mean=0.000090 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.539541 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 133 components and 0.539541 Jy ! Inverting map ! Added new window around map position (-2.5, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00848045 Jy ! Component: 100 - total flux cleaned = 0.0140669 Jy ! Component: 150 - total flux cleaned = 0.0177939 Jy ! Component: 200 - total flux cleaned = 0.0195381 Jy ! Total flux subtracted in 200 components = 0.0195381 Jy ! Clean residual min=-0.005690 max=0.005494 Jy/beam ! Clean residual mean=0.000040 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.55908 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 155 components and 0.55908 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.024 mas, bmaj=23.09 mas, bpa=1.527 degrees ! Estimated noise=2238.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350146 Jy ! Component: 100 - total flux cleaned = 0.00399112 Jy ! Component: 150 - total flux cleaned = 0.00424798 Jy ! Component: 200 - total flux cleaned = 0.00452707 Jy ! Total flux subtracted in 200 components = 0.00452707 Jy ! Clean residual min=-0.006925 max=0.005227 Jy/beam ! Clean residual mean=0.000057 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.563607 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193003 Jy ! Component: 100 - total flux cleaned = 0.000321158 Jy ! Component: 150 - total flux cleaned = 0.000437178 Jy ! Component: 200 - total flux cleaned = 0.00054335 Jy ! Total flux subtracted in 200 components = 0.00054335 Jy ! Clean residual min=-0.006769 max=0.005068 Jy/beam ! Clean residual mean=0.000055 rms=0.001477 Jy/beam ! Combined flux in latest and established models = 0.56415 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 169 components and 0.56415 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=9.826 mas, bpa=4.559 degrees ! Estimated noise=1830.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143553 Jy ! Component: 100 - total flux cleaned = -0.000248478 Jy ! Component: 150 - total flux cleaned = -0.000247795 Jy ! Component: 200 - total flux cleaned = -0.000247493 Jy ! Total flux subtracted in 200 components = -0.000247493 Jy ! Clean residual min=-0.005623 max=0.005126 Jy/beam ! Clean residual mean=0.000029 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.563902 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 178 components and 0.563902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185999Jy sigma=0.000661 ! Fit after self-cal, rms=0.185966Jy sigma=0.000660 wmodel J1316-3338_S_2017_05_31_pus_map.mod ! Writing 178 model components to file: J1316-3338_S_2017_05_31_pus_map.mod wobs J1316-3338_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1316-3338_S_2017_05_31_pus_uvs.fits wwins J1316-3338_S_2017_05_31_pus_map.win ! wwins: Wrote 4 windows to J1316-3338_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000871274 Jy ! Component: 100 - total flux cleaned = -0.00217672 Jy ! Component: 150 - total flux cleaned = -0.00248551 Jy ! Component: 200 - total flux cleaned = -0.00285468 Jy ! Component: 250 - total flux cleaned = -0.00313922 Jy ! Component: 300 - total flux cleaned = -0.00327731 Jy ! Component: 350 - total flux cleaned = -0.00354405 Jy ! Component: 400 - total flux cleaned = -0.00367477 Jy ! Component: 450 - total flux cleaned = -0.00392933 Jy ! Component: 500 - total flux cleaned = -0.0039287 Jy ! Component: 550 - total flux cleaned = -0.00417333 Jy ! Component: 600 - total flux cleaned = -0.00429222 Jy ! Component: 650 - total flux cleaned = -0.00435128 Jy ! Component: 700 - total flux cleaned = -0.0045838 Jy ! Component: 750 - total flux cleaned = -0.00458334 Jy ! Component: 800 - total flux cleaned = -0.00458346 Jy ! Component: 850 - total flux cleaned = -0.00452794 Jy ! Component: 900 - total flux cleaned = -0.0044733 Jy ! Component: 950 - total flux cleaned = -0.00441878 Jy ! Component: 1000 - total flux cleaned = -0.00441927 Jy ! Component: 1050 - total flux cleaned = -0.00441921 Jy ! Component: 1100 - total flux cleaned = -0.00447218 Jy ! Component: 1150 - total flux cleaned = -0.00447269 Jy ! Component: 1200 - total flux cleaned = -0.00442066 Jy ! Component: 1250 - total flux cleaned = -0.00442127 Jy ! Component: 1300 - total flux cleaned = -0.00457302 Jy ! Component: 1350 - total flux cleaned = -0.00462339 Jy ! Component: 1400 - total flux cleaned = -0.00457324 Jy ! Component: 1450 - total flux cleaned = -0.00462259 Jy ! Component: 1500 - total flux cleaned = -0.00467153 Jy ! Component: 1550 - total flux cleaned = -0.00481671 Jy ! Component: 1600 - total flux cleaned = -0.00462511 Jy ! Component: 1650 - total flux cleaned = -0.00486298 Jy ! Component: 1700 - total flux cleaned = -0.00486275 Jy ! Component: 1750 - total flux cleaned = -0.00500297 Jy ! Component: 1800 - total flux cleaned = -0.00495679 Jy ! Component: 1850 - total flux cleaned = -0.00509551 Jy ! Component: 1900 - total flux cleaned = -0.00518692 Jy ! Component: 1950 - total flux cleaned = -0.00505065 Jy ! Component: 2000 - total flux cleaned = -0.00536564 Jy ! Component: 2050 - total flux cleaned = -0.0053204 Jy ! Component: 2100 - total flux cleaned = -0.00549822 Jy ! Component: 2150 - total flux cleaned = -0.00549838 Jy ! Component: 2200 - total flux cleaned = -0.00545516 Jy ! Component: 2250 - total flux cleaned = -0.00562961 Jy ! Component: 2300 - total flux cleaned = -0.0057158 Jy ! Component: 2350 - total flux cleaned = -0.00575844 Jy ! Component: 2400 - total flux cleaned = -0.00580085 Jy ! Component: 2450 - total flux cleaned = -0.00588528 Jy ! Component: 2500 - total flux cleaned = -0.00588577 Jy ! Component: 2550 - total flux cleaned = -0.00592779 Jy ! Component: 2600 - total flux cleaned = -0.00601097 Jy ! Component: 2650 - total flux cleaned = -0.00596991 Jy ! Component: 2700 - total flux cleaned = -0.00605179 Jy ! Component: 2750 - total flux cleaned = -0.00605201 Jy ! Component: 2800 - total flux cleaned = -0.00613299 Jy ! Component: 2850 - total flux cleaned = -0.00613275 Jy ! Component: 2900 - total flux cleaned = -0.00609288 Jy ! Component: 2950 - total flux cleaned = -0.00613238 Jy ! Component: 3000 - total flux cleaned = -0.00597474 Jy ! Component: 3050 - total flux cleaned = -0.00609252 Jy ! Component: 3100 - total flux cleaned = -0.00617045 Jy ! Component: 3150 - total flux cleaned = -0.00605379 Jy ! Component: 3200 - total flux cleaned = -0.00613144 Jy ! Component: 3250 - total flux cleaned = -0.00620821 Jy ! Component: 3300 - total flux cleaned = -0.00624615 Jy ! Component: 3350 - total flux cleaned = -0.00620794 Jy ! Component: 3400 - total flux cleaned = -0.00624583 Jy ! Component: 3450 - total flux cleaned = -0.00632119 Jy ! Component: 3500 - total flux cleaned = -0.00613407 Jy ! Component: 3550 - total flux cleaned = -0.00613424 Jy ! Component: 3600 - total flux cleaned = -0.00613436 Jy ! Component: 3650 - total flux cleaned = -0.00598702 Jy ! Component: 3700 - total flux cleaned = -0.00598699 Jy ! Component: 3750 - total flux cleaned = -0.00591407 Jy ! Component: 3800 - total flux cleaned = -0.00584163 Jy ! Component: 3850 - total flux cleaned = -0.00584157 Jy ! Component: 3900 - total flux cleaned = -0.00580545 Jy ! Component: 3950 - total flux cleaned = -0.00569807 Jy ! Component: 4000 - total flux cleaned = -0.005591 Jy ! Component: 4050 - total flux cleaned = -0.00566217 Jy ! Total flux subtracted in 4096 components = -0.00566213 Jy ! Clean residual min=-0.002115 max=0.002086 Jy/beam ! Clean residual mean=0.000013 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.55824 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 501 components and 0.55824 Jy ![Exited script file: muppet] wmap "J1316-3338_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.494 x 9.826 at 4.559 degrees (North through East) ! Clean map min=-0.0039834 max=0.28976 Jy/beam ! Writing clean map to FITS file: J1316-3338_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.289759 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000687632 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.711936 0.711936 1.42387 2.84774 5.69549 11.391 22.7819 45.5639 91.1278 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.289 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.494 x 9.826 at 4.559 degrees (North through East) ! Clean map min=-0.0039834 max=0.28976 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1316-3338_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:49:34 2019