! Started logfile: J1316-3338_S_2017_05_27_pus_uvs.log on Fri May 3 11:08:16 2019 obs J1316-3338_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1316-3338_S_2017_05_27_pus_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.763333 visibilities/baseline/integration-bin. ! Found source: J1316-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 5496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1316-3338_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.780073Jy sigma=0.034375 ! Fit after self-cal, rms=0.775578Jy sigma=0.034155 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=7.439 mas, bpa=-0.08209 degrees ! Estimated noise=1215.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0836697 Jy ! Component: 100 - total flux cleaned = 0.116733 Jy ! Total flux subtracted in 100 components = 0.116733 Jy ! Clean residual min=-0.033786 max=0.037002 Jy/beam ! Clean residual mean=-0.000105 rms=0.010776 Jy/beam ! Combined flux in latest and established models = 0.116733 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.116733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293220Jy sigma=0.003729 ! Fit after self-cal, rms=0.292621Jy sigma=0.003728 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=8.832 mas, bpa=1.574 degrees ! Estimated noise=853.103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561079 Jy ! Component: 100 - total flux cleaned = 0.0906969 Jy ! Component: 150 - total flux cleaned = 0.114587 Jy ! Component: 200 - total flux cleaned = 0.131234 Jy ! Total flux subtracted in 200 components = 0.131234 Jy ! Clean residual min=-0.037302 max=0.044192 Jy/beam ! Clean residual mean=0.001589 rms=0.011957 Jy/beam ! Combined flux in latest and established models = 0.247967 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 52 components and 0.247967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250881Jy sigma=0.005388 ! Fit after self-cal, rms=0.248187Jy sigma=0.005381 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.60 FD 0.56 HN 1.30 KP 0.66 ! LA 0.65 MK 0.79 NL 0.71 OV 0.67 ! PT 0.69 SC 0.81 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 27.29 FD 0.59 HN 2.92 KP 0.65 ! LA 0.64 MK 0.82 NL 0.92 OV 0.65 ! PT 0.69 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.60 FD 0.62 HN 1.02 KP 0.65 ! LA 0.64 MK 0.86 NL 0.84 OV 0.60 ! PT 0.68 SC 0.94 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.56 HN 1.23 KP 1.00* ! LA 32.40 MK 0.99 NL 1.00* OV 1.00* ! PT 0.75 SC 1.00* ! ! ! Fit before self-cal, rms=0.248187Jy sigma=0.005381 ! Fit after self-cal, rms=1.903683Jy sigma=0.000889 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=9.338 mas, bpa=0.08444 degrees ! Estimated noise=1043.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000924822 Jy ! Component: 100 - total flux cleaned = -0.00130446 Jy ! Component: 150 - total flux cleaned = -0.0012962 Jy ! Component: 200 - total flux cleaned = -0.00177875 Jy ! Total flux subtracted in 200 components = -0.00177875 Jy ! Clean residual min=-0.007932 max=0.007856 Jy/beam ! Clean residual mean=-0.000130 rms=0.002119 Jy/beam ! Combined flux in latest and established models = 0.246189 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 76 components and 0.246189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.903087Jy sigma=0.000857 ! Fit after self-cal, rms=1.903788Jy sigma=0.000807 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.903788Jy sigma=0.000807 ! Fit after self-cal, rms=2.136703Jy sigma=0.000794 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=9.256 mas, bpa=0.81 degrees ! Estimated noise=1044.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00579091 Jy ! Component: 100 - total flux cleaned = 0.00558858 Jy ! Component: 150 - total flux cleaned = 0.00541147 Jy ! Component: 200 - total flux cleaned = 0.00557834 Jy ! Total flux subtracted in 200 components = 0.00557834 Jy ! Clean residual min=-0.006913 max=0.008485 Jy/beam ! Clean residual mean=-0.000135 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 0.251767 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.251767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.135993Jy sigma=0.000786 ! Fit after self-cal, rms=2.136024Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.5, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00523945 Jy ! Component: 100 - total flux cleaned = 0.00675276 Jy ! Component: 150 - total flux cleaned = 0.00778449 Jy ! Component: 200 - total flux cleaned = 0.00808779 Jy ! Total flux subtracted in 200 components = 0.00808779 Jy ! Clean residual min=-0.006468 max=0.006117 Jy/beam ! Clean residual mean=-0.000105 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 0.259855 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 105 components and 0.259855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.135505Jy sigma=0.000777 ! Fit after self-cal, rms=2.135487Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.135487Jy sigma=0.000776 ! Fit after self-cal, rms=1.495008Jy sigma=0.000711 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=9.106 mas, bpa=0.5432 degrees ! Estimated noise=1039.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150891 Jy ! Component: 100 - total flux cleaned = 0.00179993 Jy ! Component: 150 - total flux cleaned = 0.00179704 Jy ! Component: 200 - total flux cleaned = 0.00154832 Jy ! Total flux subtracted in 200 components = 0.00154832 Jy ! Clean residual min=-0.005209 max=0.004734 Jy/beam ! Clean residual mean=-0.000092 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.261403 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 113 components and 0.261403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.494884Jy sigma=0.000706 ! Fit after self-cal, rms=1.494953Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168278 Jy ! Component: 100 - total flux cleaned = 0.000904906 Jy ! Component: 150 - total flux cleaned = 0.000676508 Jy ! Component: 200 - total flux cleaned = 0.00046084 Jy ! Total flux subtracted in 200 components = 0.00046084 Jy ! Clean residual min=-0.004927 max=0.004276 Jy/beam ! Clean residual mean=-0.000092 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.261864 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 122 components and 0.261864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.494878Jy sigma=0.000701 ! Fit after self-cal, rms=1.494895Jy sigma=0.000700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.494895Jy sigma=0.000700 ! Fit after self-cal, rms=1.506581Jy sigma=0.000698 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.856 mas, bmaj=25.68 mas, bpa=3.109 degrees ! Estimated noise=1200.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297861 Jy ! Component: 100 - total flux cleaned = 0.00344626 Jy ! Component: 150 - total flux cleaned = 0.00389782 Jy ! Component: 200 - total flux cleaned = 0.00423165 Jy ! Total flux subtracted in 200 components = 0.00423165 Jy ! Clean residual min=-0.005731 max=0.003729 Jy/beam ! Clean residual mean=-0.000153 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 0.266095 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 147 components and 0.266095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.506450Jy sigma=0.000697 ! Fit after self-cal, rms=1.506544Jy sigma=0.000697 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174715 Jy ! Component: 100 - total flux cleaned = 0.000171133 Jy ! Component: 150 - total flux cleaned = 0.000283801 Jy ! Component: 200 - total flux cleaned = 0.000335198 Jy ! Total flux subtracted in 200 components = 0.000335198 Jy ! Clean residual min=-0.005417 max=0.003727 Jy/beam ! Clean residual mean=-0.000152 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.266431 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 151 components and 0.266431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.506559Jy sigma=0.000696 ! Fit after self-cal, rms=1.506564Jy sigma=0.000696 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.937 mas, bpa=0.9345 degrees ! Estimated noise=1027.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 8.937 at 0.9345 degrees (North through East) ! Clean map min=-0.0063768 max=0.109 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.553 mas, bmaj=7.275 mas, bpa=1.185 degrees ! Estimated noise=1406.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103725 Jy ! Component: 100 - total flux cleaned = 0.153937 Jy ! Component: 150 - total flux cleaned = 0.184491 Jy ! Component: 200 - total flux cleaned = 0.204993 Jy ! Total flux subtracted in 200 components = 0.204993 Jy ! Clean residual min=-0.007329 max=0.011600 Jy/beam ! Clean residual mean=-0.000247 rms=0.002170 Jy/beam ! Combined flux in latest and established models = 0.204993 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.204993 Jy ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.937 mas, bpa=0.9345 degrees ! Estimated noise=1027.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198226 Jy ! Component: 100 - total flux cleaned = 0.0316301 Jy ! Component: 150 - total flux cleaned = 0.039691 Jy ! Component: 200 - total flux cleaned = 0.0454026 Jy ! Total flux subtracted in 200 components = 0.0454026 Jy ! Clean residual min=-0.004028 max=0.005101 Jy/beam ! Clean residual mean=-0.000133 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.250395 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 90 components and 0.250395 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.856 mas, bmaj=25.68 mas, bpa=3.109 degrees ! Estimated noise=1200.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624005 Jy ! Component: 100 - total flux cleaned = 0.00988091 Jy ! Component: 150 - total flux cleaned = 0.0121937 Jy ! Component: 200 - total flux cleaned = 0.0137011 Jy ! Total flux subtracted in 200 components = 0.0137011 Jy ! Clean residual min=-0.004361 max=0.003678 Jy/beam ! Clean residual mean=-0.000166 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.264096 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234735 Jy ! Component: 100 - total flux cleaned = 0.00041309 Jy ! Component: 150 - total flux cleaned = 0.000538954 Jy ! Component: 200 - total flux cleaned = 0.000703542 Jy ! Total flux subtracted in 200 components = 0.000703542 Jy ! Clean residual min=-0.004370 max=0.003728 Jy/beam ! Clean residual mean=-0.000162 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.2648 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 119 components and 0.2648 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=8.937 mas, bpa=0.9345 degrees ! Estimated noise=1027.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000849337 Jy ! Component: 100 - total flux cleaned = -0.000754739 Jy ! Component: 150 - total flux cleaned = -0.000829711 Jy ! Component: 200 - total flux cleaned = -0.000757508 Jy ! Total flux subtracted in 200 components = -0.000757508 Jy ! Clean residual min=-0.003715 max=0.003639 Jy/beam ! Clean residual mean=-0.000090 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.264042 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 134 components and 0.264043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.506574Jy sigma=0.000690 ! Fit after self-cal, rms=1.506518Jy sigma=0.000688 wmodel J1316-3338_S_2017_05_27_pus_map.mod ! Writing 134 model components to file: J1316-3338_S_2017_05_27_pus_map.mod wobs J1316-3338_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1316-3338_S_2017_05_27_pus_uvs.fits wwins J1316-3338_S_2017_05_27_pus_map.win ! wwins: Wrote 4 windows to J1316-3338_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000831529 Jy ! Component: 100 - total flux cleaned = -0.00146058 Jy ! Component: 150 - total flux cleaned = -0.00199084 Jy ! Component: 200 - total flux cleaned = -0.00255438 Jy ! Component: 250 - total flux cleaned = -0.00277027 Jy ! Component: 300 - total flux cleaned = -0.00308474 Jy ! Component: 350 - total flux cleaned = -0.00349298 Jy ! Component: 400 - total flux cleaned = -0.00374139 Jy ! Component: 450 - total flux cleaned = -0.00417764 Jy ! Component: 500 - total flux cleaned = -0.00441372 Jy ! Component: 550 - total flux cleaned = -0.00469109 Jy ! Component: 600 - total flux cleaned = -0.004873 Jy ! Component: 650 - total flux cleaned = -0.00509582 Jy ! Component: 700 - total flux cleaned = -0.00522715 Jy ! Component: 750 - total flux cleaned = -0.00544174 Jy ! Component: 800 - total flux cleaned = -0.00561068 Jy ! Component: 850 - total flux cleaned = -0.00577669 Jy ! Component: 900 - total flux cleaned = -0.00593967 Jy ! Component: 950 - total flux cleaned = -0.00598001 Jy ! Component: 1000 - total flux cleaned = -0.00590188 Jy ! Component: 1050 - total flux cleaned = -0.00613685 Jy ! Component: 1100 - total flux cleaned = -0.00609782 Jy ! Component: 1150 - total flux cleaned = -0.00602116 Jy ! Component: 1200 - total flux cleaned = -0.00594566 Jy ! Component: 1250 - total flux cleaned = -0.00602012 Jy ! Component: 1300 - total flux cleaned = -0.0059467 Jy ! Component: 1350 - total flux cleaned = -0.00601831 Jy ! Component: 1400 - total flux cleaned = -0.00580229 Jy ! Component: 1450 - total flux cleaned = -0.00587331 Jy ! Component: 1500 - total flux cleaned = -0.00583793 Jy ! Component: 1550 - total flux cleaned = -0.00580291 Jy ! Component: 1600 - total flux cleaned = -0.00569946 Jy ! Component: 1650 - total flux cleaned = -0.00569974 Jy ! Component: 1700 - total flux cleaned = -0.00569993 Jy ! Component: 1750 - total flux cleaned = -0.00576657 Jy ! Component: 1800 - total flux cleaned = -0.00556812 Jy ! Component: 1850 - total flux cleaned = -0.00566721 Jy ! Component: 1900 - total flux cleaned = -0.00556984 Jy ! Component: 1950 - total flux cleaned = -0.00547317 Jy ! Component: 2000 - total flux cleaned = -0.0055692 Jy ! Component: 2050 - total flux cleaned = -0.00556878 Jy ! Component: 2100 - total flux cleaned = -0.00556846 Jy ! Component: 2150 - total flux cleaned = -0.00563073 Jy ! Component: 2200 - total flux cleaned = -0.00559953 Jy ! Component: 2250 - total flux cleaned = -0.00550744 Jy ! Component: 2300 - total flux cleaned = -0.00565974 Jy ! Component: 2350 - total flux cleaned = -0.00565954 Jy ! Component: 2400 - total flux cleaned = -0.00556936 Jy ! Component: 2450 - total flux cleaned = -0.00559897 Jy ! Component: 2500 - total flux cleaned = -0.0055696 Jy ! Component: 2550 - total flux cleaned = -0.00551103 Jy ! Component: 2600 - total flux cleaned = -0.00551091 Jy ! Component: 2650 - total flux cleaned = -0.00545305 Jy ! Component: 2700 - total flux cleaned = -0.00553911 Jy ! Component: 2750 - total flux cleaned = -0.00551053 Jy ! Component: 2800 - total flux cleaned = -0.0053973 Jy ! Component: 2850 - total flux cleaned = -0.00545368 Jy ! Component: 2900 - total flux cleaned = -0.00539761 Jy ! Component: 2950 - total flux cleaned = -0.00542546 Jy ! Component: 3000 - total flux cleaned = -0.00545295 Jy ! Component: 3050 - total flux cleaned = -0.00545259 Jy ! Component: 3100 - total flux cleaned = -0.00542506 Jy ! Component: 3150 - total flux cleaned = -0.00542513 Jy ! Component: 3200 - total flux cleaned = -0.00539829 Jy ! Component: 3250 - total flux cleaned = -0.00539825 Jy ! Component: 3300 - total flux cleaned = -0.0055316 Jy ! Component: 3350 - total flux cleaned = -0.00550499 Jy ! Component: 3400 - total flux cleaned = -0.00547872 Jy ! Component: 3450 - total flux cleaned = -0.00545213 Jy ! Component: 3500 - total flux cleaned = -0.0055825 Jy ! Component: 3550 - total flux cleaned = -0.00553054 Jy ! Component: 3600 - total flux cleaned = -0.00560791 Jy ! Component: 3650 - total flux cleaned = -0.00560793 Jy ! Component: 3700 - total flux cleaned = -0.00550616 Jy ! Component: 3750 - total flux cleaned = -0.00568388 Jy ! Component: 3800 - total flux cleaned = -0.00563345 Jy ! Component: 3850 - total flux cleaned = -0.00570881 Jy ! Component: 3900 - total flux cleaned = -0.0056337 Jy ! Component: 3950 - total flux cleaned = -0.0055346 Jy ! Component: 4000 - total flux cleaned = -0.00560859 Jy ! Component: 4050 - total flux cleaned = -0.0056826 Jy ! Total flux subtracted in 4096 components = -0.0056578 Jy ! Clean residual min=-0.001407 max=0.001425 Jy/beam ! Clean residual mean=-0.000019 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.258385 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 432 components and 0.258385 Jy ![Exited script file: muppet] wmap "J1316-3338_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 8.937 at 0.9345 degrees (North through East) ! Clean map min=-0.0031477 max=0.12177 Jy/beam ! Writing clean map to FITS file: J1316-3338_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.121766 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000476818 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17476 1.17476 2.34952 4.69903 9.39806 18.7961 37.5922 75.1845 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.121 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.246 x 8.937 at 0.9345 degrees (North through East) ! Clean map min=-0.0031477 max=0.12177 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1316-3338_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:08:20 2019