! Started logfile: J1316-3338_S_2017_05_01_pus_uvs.log on Wed May 1 18:38:07 2019 obs J1316-3338_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1316-3338_S_2017_05_01_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.712644 visibilities/baseline/integration-bin. ! Found source: J1316-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 3720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1316-3338_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.701266Jy sigma=0.042684 ! Fit after self-cal, rms=0.691123Jy sigma=0.041962 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.871 mas, bmaj=9.915 mas, bpa=-10.74 degrees ! Estimated noise=1682.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12557 Jy ! Component: 100 - total flux cleaned = 0.181677 Jy ! Total flux subtracted in 100 components = 0.181677 Jy ! Clean residual min=-0.055541 max=0.061339 Jy/beam ! Clean residual mean=0.000856 rms=0.017412 Jy/beam ! Combined flux in latest and established models = 0.181677 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.181677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322615Jy sigma=0.006999 ! Fit after self-cal, rms=0.321981Jy sigma=0.006997 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=12.1 mas, bpa=-10.05 degrees ! Estimated noise=1100.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190128 Jy ! Component: 100 - total flux cleaned = 0.0190217 Jy ! Component: 150 - total flux cleaned = 0.0183018 Jy ! Component: 200 - total flux cleaned = 0.0176086 Jy ! Total flux subtracted in 200 components = 0.0176086 Jy ! Clean residual min=-0.073002 max=0.088973 Jy/beam ! Clean residual mean=0.002282 rms=0.026292 Jy/beam ! Combined flux in latest and established models = 0.199286 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.199286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308064Jy sigma=0.007706 ! Fit after self-cal, rms=0.308034Jy sigma=0.007706 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.60 FD 0.51 HN 1.17 KP 0.59 ! LA 0.57 MK 0.70 NL 0.73 OV 0.64 ! PT 0.57 SC 1.16 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.63 FD 0.53 HN 1.29 KP 0.57 ! LA 0.55 MK 0.76 NL 0.83 OV 0.65 ! PT 0.55 SC 1.20 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.63 FD 0.58 HN 1.01 KP 0.58 ! LA 0.55 MK 0.74 NL 0.81 OV 0.60 ! PT 0.56 SC 1.15 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.61 HN 2.08 KP 1.00* ! LA 52.89 MK 0.80 NL 1.00* OV 1.00* ! PT 0.61 SC 1.00* ! ! ! Fit before self-cal, rms=0.308034Jy sigma=0.007706 ! Fit after self-cal, rms=0.103252Jy sigma=0.000751 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.763 mas, bmaj=11.56 mas, bpa=-6.054 degrees ! Estimated noise=1065.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00719603 Jy ! Component: 100 - total flux cleaned = 0.00825973 Jy ! Component: 150 - total flux cleaned = 0.0089785 Jy ! Component: 200 - total flux cleaned = 0.00929763 Jy ! Total flux subtracted in 200 components = 0.00929763 Jy ! Clean residual min=-0.005291 max=0.006573 Jy/beam ! Clean residual mean=0.000062 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.208584 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 0.208584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102021Jy sigma=0.000733 ! Fit after self-cal, rms=0.100197Jy sigma=0.000704 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100197Jy sigma=0.000704 ! Fit after self-cal, rms=0.095529Jy sigma=0.000679 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=11.61 mas, bpa=-7.03 degrees ! Estimated noise=1059.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445624 Jy ! Component: 100 - total flux cleaned = 0.00472954 Jy ! Component: 150 - total flux cleaned = 0.00507493 Jy ! Component: 200 - total flux cleaned = 0.00539257 Jy ! Total flux subtracted in 200 components = 0.00539257 Jy ! Clean residual min=-0.003726 max=0.004642 Jy/beam ! Clean residual mean=0.000012 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.213976 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.213976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094830Jy sigma=0.000673 ! Fit after self-cal, rms=0.094877Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348167 Jy ! Component: 100 - total flux cleaned = 0.00372434 Jy ! Component: 150 - total flux cleaned = 0.00393575 Jy ! Component: 200 - total flux cleaned = 0.00421549 Jy ! Total flux subtracted in 200 components = 0.00421549 Jy ! Clean residual min=-0.003565 max=0.003452 Jy/beam ! Clean residual mean=0.000023 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.218192 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.218192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094292Jy sigma=0.000668 ! Fit after self-cal, rms=0.094252Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094252Jy sigma=0.000668 ! Fit after self-cal, rms=0.089624Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=11.35 mas, bpa=-6.482 degrees ! Estimated noise=1050.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113272 Jy ! Component: 100 - total flux cleaned = 0.00162637 Jy ! Component: 150 - total flux cleaned = 0.00196246 Jy ! Component: 200 - total flux cleaned = 0.00218842 Jy ! Total flux subtracted in 200 components = 0.00218842 Jy ! Clean residual min=-0.003317 max=0.003231 Jy/beam ! Clean residual mean=0.000002 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.22038 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 90 components and 0.22038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089248Jy sigma=0.000663 ! Fit after self-cal, rms=0.089141Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000696104 Jy ! Component: 100 - total flux cleaned = 0.000777045 Jy ! Component: 150 - total flux cleaned = 0.000845415 Jy ! Component: 200 - total flux cleaned = 0.000845326 Jy ! Total flux subtracted in 200 components = 0.000845326 Jy ! Clean residual min=-0.003212 max=0.003100 Jy/beam ! Clean residual mean=0.000005 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.221226 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 101 components and 0.221226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088910Jy sigma=0.000661 ! Fit after self-cal, rms=0.088905Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088905Jy sigma=0.000661 ! Fit after self-cal, rms=0.085165Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.186 mas, bmaj=26.17 mas, bpa=2.54 degrees ! Estimated noise=1120.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187555 Jy ! Component: 100 - total flux cleaned = 0.00235832 Jy ! Component: 150 - total flux cleaned = 0.00239437 Jy ! Component: 200 - total flux cleaned = 0.00242701 Jy ! Total flux subtracted in 200 components = 0.00242701 Jy ! Clean residual min=-0.002669 max=0.002966 Jy/beam ! Clean residual mean=0.000004 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.223653 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 117 components and 0.223653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085108Jy sigma=0.000660 ! Fit after self-cal, rms=0.085062Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157144 Jy ! Component: 100 - total flux cleaned = 9.78862e-05 Jy ! Component: 150 - total flux cleaned = 9.78766e-05 Jy ! Component: 200 - total flux cleaned = 0.000125323 Jy ! Total flux subtracted in 200 components = 0.000125323 Jy ! Clean residual min=-0.002654 max=0.002935 Jy/beam ! Clean residual mean=0.000004 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.223778 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 134 components and 0.223778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085028Jy sigma=0.000660 ! Fit after self-cal, rms=0.085021Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.654 mas, bmaj=11.16 mas, bpa=-6.057 degrees ! Estimated noise=1040.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.654 x 11.16 at -6.057 degrees (North through East) ! Clean map min=-0.0080257 max=0.16107 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.952 mas, bmaj=9.426 mas, bpa=-6.149 degrees ! Estimated noise=1556.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116058 Jy ! Component: 100 - total flux cleaned = 0.164124 Jy ! Component: 150 - total flux cleaned = 0.187873 Jy ! Component: 200 - total flux cleaned = 0.201295 Jy ! Total flux subtracted in 200 components = 0.201295 Jy ! Clean residual min=-0.005522 max=0.007024 Jy/beam ! Clean residual mean=-0.000035 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.201295 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.201295 Jy ! Inverting map and beam ! Estimated beam: bmin=3.654 mas, bmaj=11.16 mas, bpa=-6.057 degrees ! Estimated noise=1040.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00993487 Jy ! Component: 100 - total flux cleaned = 0.0159474 Jy ! Component: 150 - total flux cleaned = 0.0193159 Jy ! Component: 200 - total flux cleaned = 0.0203917 Jy ! Total flux subtracted in 200 components = 0.0203917 Jy ! Clean residual min=-0.003561 max=0.003536 Jy/beam ! Clean residual mean=-0.000004 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.221687 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 54 components and 0.221687 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.186 mas, bmaj=26.17 mas, bpa=2.54 degrees ! Estimated noise=1120.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245898 Jy ! Component: 100 - total flux cleaned = 0.00285663 Jy ! Component: 150 - total flux cleaned = 0.00297502 Jy ! Component: 200 - total flux cleaned = 0.00303282 Jy ! Total flux subtracted in 200 components = 0.00303282 Jy ! Clean residual min=-0.002566 max=0.003303 Jy/beam ! Clean residual mean=0.000006 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.22472 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.26478e-05 Jy ! Component: 100 - total flux cleaned = 0.000102729 Jy ! Component: 150 - total flux cleaned = 0.000103906 Jy ! Component: 200 - total flux cleaned = 0.000150053 Jy ! Total flux subtracted in 200 components = 0.000150053 Jy ! Clean residual min=-0.002569 max=0.003257 Jy/beam ! Clean residual mean=0.000007 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.22487 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 81 components and 0.22487 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.654 mas, bmaj=11.16 mas, bpa=-6.057 degrees ! Estimated noise=1040.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157126 Jy ! Component: 100 - total flux cleaned = -0.000342206 Jy ! Component: 150 - total flux cleaned = -0.000181225 Jy ! Component: 200 - total flux cleaned = 0.000111517 Jy ! Total flux subtracted in 200 components = 0.000111517 Jy ! Clean residual min=-0.003169 max=0.003196 Jy/beam ! Clean residual mean=0.000004 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.224981 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.224981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085481Jy sigma=0.000661 ! Fit after self-cal, rms=0.085576Jy sigma=0.000661 wmodel J1316-3338_S_2017_05_01_pus_map.mod ! Writing 93 model components to file: J1316-3338_S_2017_05_01_pus_map.mod wobs J1316-3338_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1316-3338_S_2017_05_01_pus_uvs.fits wwins J1316-3338_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J1316-3338_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000834003 Jy ! Component: 100 - total flux cleaned = 0.00110308 Jy ! Component: 150 - total flux cleaned = 0.00105152 Jy ! Component: 200 - total flux cleaned = 0.00100323 Jy ! Component: 250 - total flux cleaned = 0.00091145 Jy ! Component: 300 - total flux cleaned = 0.000997654 Jy ! Component: 350 - total flux cleaned = 0.000953906 Jy ! Component: 400 - total flux cleaned = 0.00087116 Jy ! Component: 450 - total flux cleaned = 0.000871977 Jy ! Component: 500 - total flux cleaned = 0.000988776 Jy ! Component: 550 - total flux cleaned = 0.000988965 Jy ! Component: 600 - total flux cleaned = 0.00117424 Jy ! Component: 650 - total flux cleaned = 0.00121042 Jy ! Component: 700 - total flux cleaned = 0.00128238 Jy ! Component: 750 - total flux cleaned = 0.00145766 Jy ! Component: 800 - total flux cleaned = 0.00142343 Jy ! Component: 850 - total flux cleaned = 0.00145791 Jy ! Component: 900 - total flux cleaned = 0.00152445 Jy ! Component: 950 - total flux cleaned = 0.00155765 Jy ! Component: 1000 - total flux cleaned = 0.00146206 Jy ! Component: 1050 - total flux cleaned = 0.00146258 Jy ! Component: 1100 - total flux cleaned = 0.00143111 Jy ! Component: 1150 - total flux cleaned = 0.0013697 Jy ! Component: 1200 - total flux cleaned = 0.0012476 Jy ! Component: 1250 - total flux cleaned = 0.00124761 Jy ! Component: 1300 - total flux cleaned = 0.00112864 Jy ! Component: 1350 - total flux cleaned = 0.00109921 Jy ! Component: 1400 - total flux cleaned = 0.00109962 Jy ! Component: 1450 - total flux cleaned = 0.00104175 Jy ! Component: 1500 - total flux cleaned = 0.000984982 Jy ! Component: 1550 - total flux cleaned = 0.00104091 Jy ! Component: 1600 - total flux cleaned = 0.00104079 Jy ! Component: 1650 - total flux cleaned = 0.00101303 Jy ! Component: 1700 - total flux cleaned = 0.000877013 Jy ! Component: 1750 - total flux cleaned = 0.000877461 Jy ! Component: 1800 - total flux cleaned = 0.000824332 Jy ! Component: 1850 - total flux cleaned = 0.000850665 Jy ! Component: 1900 - total flux cleaned = 0.000850271 Jy ! Component: 1950 - total flux cleaned = 0.000746014 Jy ! Component: 2000 - total flux cleaned = 0.000668705 Jy ! Component: 2050 - total flux cleaned = 0.000643082 Jy ! Component: 2100 - total flux cleaned = 0.000491383 Jy ! Component: 2150 - total flux cleaned = 0.000441436 Jy ! Component: 2200 - total flux cleaned = 0.00041676 Jy ! Component: 2250 - total flux cleaned = 0.000368165 Jy ! Component: 2300 - total flux cleaned = 0.000417319 Jy ! Component: 2350 - total flux cleaned = 0.00039334 Jy ! Component: 2400 - total flux cleaned = 0.000321775 Jy ! Component: 2450 - total flux cleaned = 0.000392738 Jy ! Component: 2500 - total flux cleaned = 0.000368938 Jy ! Component: 2550 - total flux cleaned = 0.000391792 Jy ! Component: 2600 - total flux cleaned = 0.000391853 Jy ! Component: 2650 - total flux cleaned = 0.000345734 Jy ! Component: 2700 - total flux cleaned = 0.000300087 Jy ! Component: 2750 - total flux cleaned = 0.00027776 Jy ! Component: 2800 - total flux cleaned = 0.000255506 Jy ! Component: 2850 - total flux cleaned = 0.000166939 Jy ! Component: 2900 - total flux cleaned = 0.000233435 Jy ! Component: 2950 - total flux cleaned = 0.000255485 Jy ! Component: 3000 - total flux cleaned = 0.00027717 Jy ! Component: 3050 - total flux cleaned = 0.00019048 Jy ! Component: 3100 - total flux cleaned = 0.000126199 Jy ! Component: 3150 - total flux cleaned = 0.000190301 Jy ! Component: 3200 - total flux cleaned = 0.000168785 Jy ! Component: 3250 - total flux cleaned = 0.000105588 Jy ! Component: 3300 - total flux cleaned = 0.000126624 Jy ! Component: 3350 - total flux cleaned = 0.000126642 Jy ! Component: 3400 - total flux cleaned = 6.46084e-05 Jy ! Component: 3450 - total flux cleaned = 6.45713e-05 Jy ! Component: 3500 - total flux cleaned = 4.42479e-05 Jy ! Component: 3550 - total flux cleaned = 6.44408e-05 Jy ! Component: 3600 - total flux cleaned = 4.43117e-05 Jy ! Component: 3650 - total flux cleaned = 4.4354e-05 Jy ! Component: 3700 - total flux cleaned = 4.48164e-06 Jy ! Component: 3750 - total flux cleaned = -0.000113735 Jy ! Component: 3800 - total flux cleaned = -0.000172621 Jy ! Component: 3850 - total flux cleaned = -0.000211573 Jy ! Component: 3900 - total flux cleaned = -0.000250235 Jy ! Component: 3950 - total flux cleaned = -0.000269396 Jy ! Component: 4000 - total flux cleaned = -0.000365171 Jy ! Component: 4050 - total flux cleaned = -0.000403312 Jy ! Total flux subtracted in 4096 components = -0.000422191 Jy ! Clean residual min=-0.001053 max=0.001123 Jy/beam ! Clean residual mean=-0.000001 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.224559 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 344 components and 0.224559 Jy ![Exited script file: muppet] wmap "J1316-3338_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.654 x 11.16 at -6.057 degrees (North through East) ! Clean map min=-0.0033925 max=0.15523 Jy/beam ! Writing clean map to FITS file: J1316-3338_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.155231 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000350325 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.677042 0.677042 1.35408 2.70817 5.41634 10.8327 21.6654 43.3307 86.6614 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.155 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.654 x 11.16 at -6.057 degrees (North through East) ! Clean map min=-0.0033925 max=0.15523 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1316-3338_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:38:11 2019