! Started logfile: J1316-3338_S_2017_04_28_pus_uvs.log on Thu May 2 16:27:05 2019 obs J1316-3338_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1316-3338_S_2017_04_28_pus_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.682011 visibilities/baseline/integration-bin. ! Found source: J1316-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 5156 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1316-3338_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 278 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.735242Jy sigma=0.020899 ! Fit after self-cal, rms=0.722379Jy sigma=0.020285 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=7.893 mas, bpa=-0.1097 degrees ! Estimated noise=2144.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172341 Jy ! Component: 100 - total flux cleaned = 0.256138 Jy ! Total flux subtracted in 100 components = 0.256138 Jy ! Clean residual min=-0.052869 max=0.053174 Jy/beam ! Clean residual mean=0.000518 rms=0.017303 Jy/beam ! Combined flux in latest and established models = 0.256138 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.256138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247700Jy sigma=0.004902 ! Fit after self-cal, rms=0.246798Jy sigma=0.004901 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.573 mas, bmaj=9.429 mas, bpa=2.949 degrees ! Estimated noise=1630.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0715201 Jy ! Component: 100 - total flux cleaned = 0.0989164 Jy ! Component: 150 - total flux cleaned = 0.107641 Jy ! Component: 200 - total flux cleaned = 0.108005 Jy ! Total flux subtracted in 200 components = 0.108005 Jy ! Clean residual min=-0.074414 max=0.083581 Jy/beam ! Clean residual mean=0.001183 rms=0.029263 Jy/beam ! Combined flux in latest and established models = 0.364144 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.364144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197951Jy sigma=0.006832 ! Fit after self-cal, rms=0.197663Jy sigma=0.006832 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.86 HN 1.57 KP 0.82 ! LA 0.81 MK 0.97 NL 0.93 OV 0.86 ! PT 0.85 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.77 HN 1.47 KP 0.78 ! LA 0.79 MK 1.02 NL 1.14 OV 0.89 ! PT 0.84 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.83 HN 1.60 KP 0.82 ! LA 0.79 MK 1.00 NL 1.04 OV 0.82 ! PT 0.84 SC 1.05 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.83 HN 1.62 KP 1.00* ! LA 48.08 MK 1.04 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.197663Jy sigma=0.006832 ! Fit after self-cal, rms=5.089349Jy sigma=0.000783 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=9.005 mas, bpa=4.096 degrees ! Estimated noise=1637.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192093 Jy ! Component: 100 - total flux cleaned = 0.0275224 Jy ! Component: 150 - total flux cleaned = 0.0298072 Jy ! Component: 200 - total flux cleaned = 0.0312059 Jy ! Total flux subtracted in 200 components = 0.0312059 Jy ! Clean residual min=-0.010847 max=0.011695 Jy/beam ! Clean residual mean=0.000037 rms=0.002855 Jy/beam ! Combined flux in latest and established models = 0.39535 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.39535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.087975Jy sigma=0.000765 ! Fit after self-cal, rms=5.088632Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.088632Jy sigma=0.000761 ! Fit after self-cal, rms=5.719160Jy sigma=0.000751 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=8.782 mas, bpa=4.968 degrees ! Estimated noise=1623.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111452 Jy ! Component: 100 - total flux cleaned = 0.017367 Jy ! Component: 150 - total flux cleaned = 0.0191881 Jy ! Component: 200 - total flux cleaned = 0.0205843 Jy ! Total flux subtracted in 200 components = 0.0205843 Jy ! Clean residual min=-0.007972 max=0.008859 Jy/beam ! Clean residual mean=-0.000033 rms=0.002408 Jy/beam ! Combined flux in latest and established models = 0.415934 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.415934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.717904Jy sigma=0.000747 ! Fit after self-cal, rms=5.717890Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254098 Jy ! Component: 100 - total flux cleaned = 0.00331341 Jy ! Component: 150 - total flux cleaned = 0.00385065 Jy ! Component: 200 - total flux cleaned = 0.00422227 Jy ! Total flux subtracted in 200 components = 0.00422227 Jy ! Clean residual min=-0.007408 max=0.007643 Jy/beam ! Clean residual mean=-0.000026 rms=0.002292 Jy/beam ! Combined flux in latest and established models = 0.420156 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.420156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.717744Jy sigma=0.000745 ! Fit after self-cal, rms=5.717744Jy sigma=0.000745 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.717744Jy sigma=0.000745 ! Fit after self-cal, rms=0.158654Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=8.556 mas, bpa=5.774 degrees ! Estimated noise=1597.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.87429e-05 Jy ! Component: 100 - total flux cleaned = -0.000185867 Jy ! Component: 150 - total flux cleaned = -0.000186084 Jy ! Component: 200 - total flux cleaned = -8.18024e-05 Jy ! Total flux subtracted in 200 components = -8.18024e-05 Jy ! Clean residual min=-0.005132 max=0.004980 Jy/beam ! Clean residual mean=0.000096 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.420074 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 0.420074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158374Jy sigma=0.000673 ! Fit after self-cal, rms=0.158098Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000796317 Jy ! Component: 100 - total flux cleaned = 0.000601798 Jy ! Component: 150 - total flux cleaned = 0.000605483 Jy ! Component: 200 - total flux cleaned = 0.000607927 Jy ! Total flux subtracted in 200 components = 0.000607927 Jy ! Clean residual min=-0.005073 max=0.004405 Jy/beam ! Clean residual mean=0.000097 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.420682 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 0.420682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157902Jy sigma=0.000672 ! Fit after self-cal, rms=0.157898Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157898Jy sigma=0.000671 ! Fit after self-cal, rms=0.154960Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.618 mas, bmaj=24.81 mas, bpa=7.973 degrees ! Estimated noise=1823.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258821 Jy ! Component: 100 - total flux cleaned = 0.00297925 Jy ! Component: 150 - total flux cleaned = 0.00320669 Jy ! Component: 200 - total flux cleaned = 0.00330934 Jy ! Total flux subtracted in 200 components = 0.00330934 Jy ! Clean residual min=-0.004693 max=0.004553 Jy/beam ! Clean residual mean=0.000161 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.423992 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 106 components and 0.423992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154932Jy sigma=0.000671 ! Fit after self-cal, rms=0.154914Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187447 Jy ! Component: 100 - total flux cleaned = 0.000233938 Jy ! Component: 150 - total flux cleaned = 0.000317917 Jy ! Component: 200 - total flux cleaned = 0.000357875 Jy ! Total flux subtracted in 200 components = 0.000357875 Jy ! Clean residual min=-0.004724 max=0.004504 Jy/beam ! Clean residual mean=0.000162 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.42435 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 114 components and 0.42435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154891Jy sigma=0.000671 ! Fit after self-cal, rms=0.154890Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=8.489 mas, bpa=6.082 degrees ! Estimated noise=1583.6 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 8.489 at 6.082 degrees (North through East) ! Clean map min=-0.0048327 max=0.2318 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.674 mas, bmaj=6.922 mas, bpa=3.691 degrees ! Estimated noise=2214.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185284 Jy ! Component: 100 - total flux cleaned = 0.271521 Jy ! Component: 150 - total flux cleaned = 0.316907 Jy ! Component: 200 - total flux cleaned = 0.344029 Jy ! Total flux subtracted in 200 components = 0.344029 Jy ! Clean residual min=-0.008923 max=0.015096 Jy/beam ! Clean residual mean=-0.000026 rms=0.002386 Jy/beam ! Combined flux in latest and established models = 0.344029 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.344029 Jy ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=8.489 mas, bpa=6.082 degrees ! Estimated noise=1583.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276976 Jy ! Component: 100 - total flux cleaned = 0.0441391 Jy ! Component: 150 - total flux cleaned = 0.05463 Jy ! Component: 200 - total flux cleaned = 0.0616675 Jy ! Total flux subtracted in 200 components = 0.0616675 Jy ! Clean residual min=-0.005164 max=0.005671 Jy/beam ! Clean residual mean=0.000056 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.405696 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 94 components and 0.405696 Jy ! Inverting map ! Added new window around map position (4, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593629 Jy ! Component: 100 - total flux cleaned = 0.0100406 Jy ! Component: 150 - total flux cleaned = 0.0121744 Jy ! Component: 200 - total flux cleaned = 0.0136623 Jy ! Total flux subtracted in 200 components = 0.0136623 Jy ! Clean residual min=-0.004470 max=0.004324 Jy/beam ! Clean residual mean=0.000078 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.419359 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 128 components and 0.419359 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.618 mas, bmaj=24.81 mas, bpa=7.973 degrees ! Estimated noise=1823.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231629 Jy ! Component: 100 - total flux cleaned = 0.00345073 Jy ! Component: 150 - total flux cleaned = 0.00361588 Jy ! Component: 200 - total flux cleaned = 0.00368704 Jy ! Total flux subtracted in 200 components = 0.00368704 Jy ! Clean residual min=-0.004296 max=0.004478 Jy/beam ! Clean residual mean=0.000152 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.423046 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.43081e-05 Jy ! Component: 100 - total flux cleaned = 9.46522e-05 Jy ! Component: 150 - total flux cleaned = 0.000123348 Jy ! Component: 200 - total flux cleaned = 0.000124023 Jy ! Total flux subtracted in 200 components = 0.000124023 Jy ! Clean residual min=-0.004247 max=0.004467 Jy/beam ! Clean residual mean=0.000152 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.42317 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 149 components and 0.42317 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=8.489 mas, bpa=6.082 degrees ! Estimated noise=1583.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000857345 Jy ! Component: 100 - total flux cleaned = -0.000979754 Jy ! Component: 150 - total flux cleaned = -0.00109114 Jy ! Component: 200 - total flux cleaned = -0.00109062 Jy ! Total flux subtracted in 200 components = -0.00109062 Jy ! Clean residual min=-0.004494 max=0.004252 Jy/beam ! Clean residual mean=0.000080 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.422079 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 165 components and 0.422079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154238Jy sigma=0.000669 ! Fit after self-cal, rms=0.154121Jy sigma=0.000669 wmodel J1316-3338_S_2017_04_28_pus_map.mod ! Writing 165 model components to file: J1316-3338_S_2017_04_28_pus_map.mod wobs J1316-3338_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1316-3338_S_2017_04_28_pus_uvs.fits wwins J1316-3338_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J1316-3338_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000830147 Jy ! Component: 100 - total flux cleaned = -0.00113415 Jy ! Component: 150 - total flux cleaned = -0.00113428 Jy ! Component: 200 - total flux cleaned = -0.00100099 Jy ! Component: 250 - total flux cleaned = -0.000812132 Jy ! Component: 300 - total flux cleaned = -0.00056667 Jy ! Component: 350 - total flux cleaned = -2.74334e-05 Jy ! Component: 400 - total flux cleaned = 0.000497112 Jy ! Component: 450 - total flux cleaned = 0.000781817 Jy ! Component: 500 - total flux cleaned = 0.00106137 Jy ! Component: 550 - total flux cleaned = 0.00122662 Jy ! Component: 600 - total flux cleaned = 0.00144344 Jy ! Component: 650 - total flux cleaned = 0.00186591 Jy ! Component: 700 - total flux cleaned = 0.00212591 Jy ! Component: 750 - total flux cleaned = 0.00268749 Jy ! Component: 800 - total flux cleaned = 0.0029877 Jy ! Component: 850 - total flux cleaned = 0.0032348 Jy ! Component: 900 - total flux cleaned = 0.00362429 Jy ! Component: 950 - total flux cleaned = 0.00395891 Jy ! Component: 1000 - total flux cleaned = 0.00419426 Jy ! Component: 1050 - total flux cleaned = 0.00442728 Jy ! Component: 1100 - total flux cleaned = 0.00484159 Jy ! Component: 1150 - total flux cleaned = 0.00506875 Jy ! Component: 1200 - total flux cleaned = 0.00533817 Jy ! Component: 1250 - total flux cleaned = 0.00560433 Jy ! Component: 1300 - total flux cleaned = 0.00586698 Jy ! Component: 1350 - total flux cleaned = 0.0059973 Jy ! Component: 1400 - total flux cleaned = 0.00625514 Jy ! Component: 1450 - total flux cleaned = 0.00651074 Jy ! Component: 1500 - total flux cleaned = 0.00684792 Jy ! Component: 1550 - total flux cleaned = 0.0071407 Jy ! Component: 1600 - total flux cleaned = 0.00743058 Jy ! Component: 1650 - total flux cleaned = 0.00767699 Jy ! Component: 1700 - total flux cleaned = 0.007962 Jy ! Component: 1750 - total flux cleaned = 0.0082849 Jy ! Component: 1800 - total flux cleaned = 0.00856447 Jy ! Component: 1850 - total flux cleaned = 0.00868355 Jy ! Component: 1900 - total flux cleaned = 0.00888112 Jy ! Component: 1950 - total flux cleaned = 0.00899862 Jy ! Component: 2000 - total flux cleaned = 0.00926938 Jy ! Component: 2050 - total flux cleaned = 0.00949922 Jy ! Component: 2100 - total flux cleaned = 0.00957524 Jy ! Component: 2150 - total flux cleaned = 0.00976362 Jy ! Component: 2200 - total flux cleaned = 0.00987601 Jy ! Component: 2250 - total flux cleaned = 0.0101359 Jy ! Component: 2300 - total flux cleaned = 0.0101724 Jy ! Component: 2350 - total flux cleaned = 0.010319 Jy ! Component: 2400 - total flux cleaned = 0.0105009 Jy ! Component: 2450 - total flux cleaned = 0.0106451 Jy ! Component: 2500 - total flux cleaned = 0.0108238 Jy ! Component: 2550 - total flux cleaned = 0.011001 Jy ! Component: 2600 - total flux cleaned = 0.011071 Jy ! Component: 2650 - total flux cleaned = 0.0112459 Jy ! Component: 2700 - total flux cleaned = 0.0113502 Jy ! Component: 2750 - total flux cleaned = 0.0114189 Jy ! Component: 2800 - total flux cleaned = 0.0115903 Jy ! Component: 2850 - total flux cleaned = 0.0116582 Jy ! Component: 2900 - total flux cleaned = 0.011726 Jy ! Component: 2950 - total flux cleaned = 0.011793 Jy ! Component: 3000 - total flux cleaned = 0.0118938 Jy ! Component: 3050 - total flux cleaned = 0.0119932 Jy ! Component: 3100 - total flux cleaned = 0.0121582 Jy ! Component: 3150 - total flux cleaned = 0.0122564 Jy ! Component: 3200 - total flux cleaned = 0.0123542 Jy ! Component: 3250 - total flux cleaned = 0.0124838 Jy ! Component: 3300 - total flux cleaned = 0.0125803 Jy ! Component: 3350 - total flux cleaned = 0.0127084 Jy ! Component: 3400 - total flux cleaned = 0.0127087 Jy ! Component: 3450 - total flux cleaned = 0.0128355 Jy ! Component: 3500 - total flux cleaned = 0.0128671 Jy ! Component: 3550 - total flux cleaned = 0.0129615 Jy ! Component: 3600 - total flux cleaned = 0.0130553 Jy ! Component: 3650 - total flux cleaned = 0.0131173 Jy ! Component: 3700 - total flux cleaned = 0.0131482 Jy ! Component: 3750 - total flux cleaned = 0.0132403 Jy ! Component: 3800 - total flux cleaned = 0.01321 Jy ! Component: 3850 - total flux cleaned = 0.0133315 Jy ! Component: 3900 - total flux cleaned = 0.0133315 Jy ! Component: 3950 - total flux cleaned = 0.0135122 Jy ! Component: 4000 - total flux cleaned = 0.0133628 Jy ! Component: 4050 - total flux cleaned = 0.0135118 Jy ! Total flux subtracted in 4096 components = 0.0134526 Jy ! Clean residual min=-0.001875 max=0.001571 Jy/beam ! Clean residual mean=0.000008 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.435532 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 430 components and 0.435532 Jy ![Exited script file: muppet] wmap "J1316-3338_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 8.489 at 6.082 degrees (North through East) ! Clean map min=-0.0041249 max=0.23638 Jy/beam ! Writing clean map to FITS file: J1316-3338_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.23638 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000543593 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.689897 0.689897 1.37979 2.75959 5.51918 11.0384 22.0767 44.1534 88.3069 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.236 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.376 x 8.489 at 6.082 degrees (North through East) ! Clean map min=-0.0041249 max=0.23638 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1316-3338_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:27:10 2019