! Started logfile: J1316-3338_S_2017_03_23_pus_uvs.log on Mon May 13 10:00:28 2019 obs J1316-3338_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1316-3338_S_2017_03_23_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.551984 visibilities/baseline/integration-bin. ! Found source: J1316-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 5564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1316-3338_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 272 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.687629Jy sigma=0.003967 ! Fit after self-cal, rms=0.667775Jy sigma=0.003867 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.696 mas, bmaj=8.794 mas, bpa=5.581 degrees ! Estimated noise=2285.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.240186 Jy ! Component: 100 - total flux cleaned = 0.352111 Jy ! Total flux subtracted in 100 components = 0.352111 Jy ! Clean residual min=-0.016373 max=0.055388 Jy/beam ! Clean residual mean=-0.000034 rms=0.005229 Jy/beam ! Combined flux in latest and established models = 0.352111 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.352111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217250Jy sigma=0.001170 ! Fit after self-cal, rms=0.215875Jy sigma=0.001164 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0679091 Jy ! Component: 100 - total flux cleaned = 0.107201 Jy ! Total flux subtracted in 100 components = 0.107201 Jy ! Clean residual min=-0.011234 max=0.025268 Jy/beam ! Clean residual mean=-0.000027 rms=0.003282 Jy/beam ! Combined flux in latest and established models = 0.459312 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 41 components and 0.459312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172028Jy sigma=0.000892 ! Fit after self-cal, rms=0.171854Jy sigma=0.000891 ! Inverting map ! Added new window around map position (-5, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291636 Jy ! Component: 100 - total flux cleaned = 0.0508832 Jy ! Total flux subtracted in 100 components = 0.0508832 Jy ! Clean residual min=-0.010032 max=0.016904 Jy/beam ! Clean residual mean=-0.000023 rms=0.002728 Jy/beam ! Combined flux in latest and established models = 0.510196 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 91 components and 0.510196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159119Jy sigma=0.000815 ! Fit after self-cal, rms=0.158719Jy sigma=0.000812 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190174 Jy ! Component: 100 - total flux cleaned = 0.033158 Jy ! Total flux subtracted in 100 components = 0.033158 Jy ! Clean residual min=-0.008842 max=0.012979 Jy/beam ! Clean residual mean=-0.000020 rms=0.002419 Jy/beam ! Combined flux in latest and established models = 0.543354 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 131 components and 0.543354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152520Jy sigma=0.000778 ! Fit after self-cal, rms=0.152300Jy sigma=0.000776 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=10.91 mas, bpa=5.672 degrees ! Estimated noise=1813.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274316 Jy ! Component: 100 - total flux cleaned = 0.0445937 Jy ! Component: 150 - total flux cleaned = 0.0558912 Jy ! Component: 200 - total flux cleaned = 0.0633668 Jy ! Total flux subtracted in 200 components = 0.0633668 Jy ! Clean residual min=-0.009164 max=0.012768 Jy/beam ! Clean residual mean=-0.000031 rms=0.002804 Jy/beam ! Combined flux in latest and established models = 0.60672 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 178 components and 0.60672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145563Jy sigma=0.000747 ! Fit after self-cal, rms=0.145303Jy sigma=0.000745 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.05 KP 1.05 ! LA 1.00 MK 1.00 NL 0.93 OV 1.04 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 1.11 KP 1.00 ! LA 0.94 MK 0.94 NL 1.11 OV 1.07 ! PT 0.98 SC 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.05 HN 1.09 KP 0.89 ! LA 0.73 MK 0.96 NL 1.23 OV 0.94 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.05 HN 1.00 KP 1.00* ! LA 0.82 MK 1.06 NL 1.00* OV 1.28 ! PT 1.04 SC 1.28 ! ! ! Fit before self-cal, rms=0.145303Jy sigma=0.000745 ! Fit after self-cal, rms=0.127444Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=10.95 mas, bpa=5.666 degrees ! Estimated noise=1814.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.5, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00573921 Jy ! Component: 100 - total flux cleaned = 0.00559573 Jy ! Component: 150 - total flux cleaned = 0.00560221 Jy ! Component: 200 - total flux cleaned = 0.0060049 Jy ! Total flux subtracted in 200 components = 0.0060049 Jy ! Clean residual min=-0.005897 max=0.005366 Jy/beam ! Clean residual mean=-0.000013 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 0.612725 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 201 components and 0.612725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127001Jy sigma=0.000658 ! Fit after self-cal, rms=0.127013Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127013Jy sigma=0.000658 ! Fit after self-cal, rms=0.127483Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=10.99 mas, bpa=5.706 degrees ! Estimated noise=1818.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703003 Jy ! Component: 100 - total flux cleaned = 0.00113848 Jy ! Component: 150 - total flux cleaned = 0.00113493 Jy ! Component: 200 - total flux cleaned = 0.00113123 Jy ! Total flux subtracted in 200 components = 0.00113123 Jy ! Clean residual min=-0.005467 max=0.004759 Jy/beam ! Clean residual mean=-0.000024 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.613857 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 223 components and 0.613857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127382Jy sigma=0.000646 ! Fit after self-cal, rms=0.127411Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240579 Jy ! Component: 100 - total flux cleaned = 0.000240327 Jy ! Component: 150 - total flux cleaned = 0.000238701 Jy ! Component: 200 - total flux cleaned = 0.000237499 Jy ! Total flux subtracted in 200 components = 0.000237499 Jy ! Clean residual min=-0.005336 max=0.004768 Jy/beam ! Clean residual mean=-0.000023 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.614094 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 228 components and 0.614094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127354Jy sigma=0.000645 ! Fit after self-cal, rms=0.127351Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127351Jy sigma=0.000645 ! Fit after self-cal, rms=0.128510Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=10.97 mas, bpa=5.825 degrees ! Estimated noise=1817.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135125 Jy ! Component: 100 - total flux cleaned = -0.00158384 Jy ! Component: 150 - total flux cleaned = -0.00168853 Jy ! Component: 200 - total flux cleaned = -0.00168792 Jy ! Total flux subtracted in 200 components = -0.00168792 Jy ! Clean residual min=-0.004956 max=0.003788 Jy/beam ! Clean residual mean=-0.000040 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.612406 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 238 components and 0.612406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128452Jy sigma=0.000638 ! Fit after self-cal, rms=0.128503Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124744 Jy ! Component: 100 - total flux cleaned = -0.000125513 Jy ! Component: 150 - total flux cleaned = -0.000124517 Jy ! Component: 200 - total flux cleaned = -0.000124011 Jy ! Total flux subtracted in 200 components = -0.000124011 Jy ! Clean residual min=-0.004936 max=0.003785 Jy/beam ! Clean residual mean=-0.000040 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.612282 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 241 components and 0.612282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128468Jy sigma=0.000637 ! Fit after self-cal, rms=0.128465Jy sigma=0.000637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128465Jy sigma=0.000637 ! Fit after self-cal, rms=0.128338Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.243 mas, bmaj=22.13 mas, bpa=3.594 degrees ! Estimated noise=2215.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00163457 Jy ! Component: 100 - total flux cleaned = -0.00188849 Jy ! Component: 150 - total flux cleaned = -0.00197367 Jy ! Component: 200 - total flux cleaned = -0.00208195 Jy ! Total flux subtracted in 200 components = -0.00208195 Jy ! Clean residual min=-0.004635 max=0.003827 Jy/beam ! Clean residual mean=-0.000071 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.6102 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 245 components and 0.6102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128314Jy sigma=0.000637 ! Fit after self-cal, rms=0.128322Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.32069e-05 Jy ! Component: 100 - total flux cleaned = -1.81609e-05 Jy ! Component: 150 - total flux cleaned = -8.1591e-05 Jy ! Component: 200 - total flux cleaned = -0.00011019 Jy ! Total flux subtracted in 200 components = -0.00011019 Jy ! Clean residual min=-0.004614 max=0.003822 Jy/beam ! Clean residual mean=-0.000071 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.61009 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 250 components and 0.61009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128314Jy sigma=0.000637 ! Fit after self-cal, rms=0.128318Jy sigma=0.000637 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.416 mas, bmaj=10.95 mas, bpa=5.911 degrees ! Estimated noise=1815.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.416 x 10.95 at 5.911 degrees (North through East) ! Clean map min=-0.0047865 max=0.33362 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=8.81 mas, bpa=5.831 degrees ! Estimated noise=2330.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.246155 Jy ! Component: 100 - total flux cleaned = 0.362367 Jy ! Component: 150 - total flux cleaned = 0.428362 Jy ! Component: 200 - total flux cleaned = 0.469505 Jy ! Total flux subtracted in 200 components = 0.469505 Jy ! Clean residual min=-0.009127 max=0.022955 Jy/beam ! Clean residual mean=-0.000037 rms=0.002712 Jy/beam ! Combined flux in latest and established models = 0.469505 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.469505 Jy ! Inverting map and beam ! Estimated beam: bmin=3.416 mas, bmaj=10.95 mas, bpa=5.911 degrees ! Estimated noise=1815.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0519835 Jy ! Component: 100 - total flux cleaned = 0.0811655 Jy ! Component: 150 - total flux cleaned = 0.0990144 Jy ! Component: 200 - total flux cleaned = 0.110933 Jy ! Total flux subtracted in 200 components = 0.110933 Jy ! Clean residual min=-0.005699 max=0.007836 Jy/beam ! Clean residual mean=-0.000092 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 0.580438 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 136 components and 0.580438 Jy ! Inverting map ! Added new window around map position (-4.5, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844984 Jy ! Component: 100 - total flux cleaned = 0.0142578 Jy ! Component: 150 - total flux cleaned = 0.018439 Jy ! Component: 200 - total flux cleaned = 0.0215304 Jy ! Total flux subtracted in 200 components = 0.0215304 Jy ! Clean residual min=-0.005042 max=0.003767 Jy/beam ! Clean residual mean=-0.000054 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.601968 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 185 components and 0.601968 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.243 mas, bmaj=22.13 mas, bpa=3.594 degrees ! Estimated noise=2215.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347674 Jy ! Component: 100 - total flux cleaned = 0.00552564 Jy ! Component: 150 - total flux cleaned = 0.00685998 Jy ! Component: 200 - total flux cleaned = 0.00753479 Jy ! Total flux subtracted in 200 components = 0.00753479 Jy ! Clean residual min=-0.004607 max=0.003739 Jy/beam ! Clean residual mean=-0.000075 rms=0.001286 Jy/beam ! Combined flux in latest and established models = 0.609503 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.92522e-05 Jy ! Component: 100 - total flux cleaned = 0.000116879 Jy ! Component: 150 - total flux cleaned = 0.000192736 Jy ! Component: 200 - total flux cleaned = 0.000239211 Jy ! Total flux subtracted in 200 components = 0.000239211 Jy ! Clean residual min=-0.004614 max=0.003750 Jy/beam ! Clean residual mean=-0.000074 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.609742 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 218 components and 0.609742 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.416 mas, bmaj=10.95 mas, bpa=5.911 degrees ! Estimated noise=1815.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159709 Jy ! Component: 100 - total flux cleaned = -0.000103242 Jy ! Component: 150 - total flux cleaned = -0.000103236 Jy ! Component: 200 - total flux cleaned = -0.000144709 Jy ! Total flux subtracted in 200 components = -0.000144709 Jy ! Clean residual min=-0.004844 max=0.003840 Jy/beam ! Clean residual mean=-0.000040 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.609598 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 229 components and 0.609598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128191Jy sigma=0.000637 ! Fit after self-cal, rms=0.128152Jy sigma=0.000637 wmodel J1316-3338_S_2017_03_23_pus_map.mod ! Writing 229 model components to file: J1316-3338_S_2017_03_23_pus_map.mod wobs J1316-3338_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1316-3338_S_2017_03_23_pus_uvs.fits wwins J1316-3338_S_2017_03_23_pus_map.win ! wwins: Wrote 4 windows to J1316-3338_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00206322 Jy ! Component: 100 - total flux cleaned = -0.00307878 Jy ! Component: 150 - total flux cleaned = -0.00377438 Jy ! Component: 200 - total flux cleaned = -0.00431196 Jy ! Component: 250 - total flux cleaned = -0.00457412 Jy ! Component: 300 - total flux cleaned = -0.00476625 Jy ! Component: 350 - total flux cleaned = -0.00470691 Jy ! Component: 400 - total flux cleaned = -0.00494938 Jy ! Component: 450 - total flux cleaned = -0.00506714 Jy ! Component: 500 - total flux cleaned = -0.00506876 Jy ! Component: 550 - total flux cleaned = -0.0054111 Jy ! Component: 600 - total flux cleaned = -0.00552399 Jy ! Component: 650 - total flux cleaned = -0.00563469 Jy ! Component: 700 - total flux cleaned = -0.00579729 Jy ! Component: 750 - total flux cleaned = -0.00590459 Jy ! Component: 800 - total flux cleaned = -0.0062212 Jy ! Component: 850 - total flux cleaned = -0.00637755 Jy ! Component: 900 - total flux cleaned = -0.0065831 Jy ! Component: 950 - total flux cleaned = -0.00673587 Jy ! Component: 1000 - total flux cleaned = -0.00693747 Jy ! Component: 1050 - total flux cleaned = -0.00713639 Jy ! Component: 1100 - total flux cleaned = -0.00723541 Jy ! Component: 1150 - total flux cleaned = -0.00738287 Jy ! Component: 1200 - total flux cleaned = -0.00752897 Jy ! Component: 1250 - total flux cleaned = -0.00776929 Jy ! Component: 1300 - total flux cleaned = -0.00781714 Jy ! Component: 1350 - total flux cleaned = -0.00805246 Jy ! Component: 1400 - total flux cleaned = -0.00814605 Jy ! Component: 1450 - total flux cleaned = -0.0083308 Jy ! Component: 1500 - total flux cleaned = -0.00842232 Jy ! Component: 1550 - total flux cleaned = -0.00846784 Jy ! Component: 1600 - total flux cleaned = -0.00851313 Jy ! Component: 1650 - total flux cleaned = -0.00851342 Jy ! Component: 1700 - total flux cleaned = -0.00864707 Jy ! Component: 1750 - total flux cleaned = -0.00886732 Jy ! Component: 1800 - total flux cleaned = -0.00891096 Jy ! Component: 1850 - total flux cleaned = -0.0091279 Jy ! Component: 1900 - total flux cleaned = -0.00921369 Jy ! Component: 1950 - total flux cleaned = -0.00929959 Jy ! Component: 2000 - total flux cleaned = -0.00955436 Jy ! Component: 2050 - total flux cleaned = -0.00942822 Jy ! Component: 2100 - total flux cleaned = -0.00967955 Jy ! Component: 2150 - total flux cleaned = -0.00976296 Jy ! Component: 2200 - total flux cleaned = -0.00988735 Jy ! Component: 2250 - total flux cleaned = -0.0101338 Jy ! Component: 2300 - total flux cleaned = -0.0102968 Jy ! Component: 2350 - total flux cleaned = -0.010378 Jy ! Component: 2400 - total flux cleaned = -0.0105395 Jy ! Component: 2450 - total flux cleaned = -0.0105797 Jy ! Component: 2500 - total flux cleaned = -0.0106596 Jy ! Component: 2550 - total flux cleaned = -0.0108184 Jy ! Component: 2600 - total flux cleaned = -0.0108184 Jy ! Component: 2650 - total flux cleaned = -0.0110143 Jy ! Component: 2700 - total flux cleaned = -0.0110534 Jy ! Component: 2750 - total flux cleaned = -0.0111307 Jy ! Component: 2800 - total flux cleaned = -0.0111308 Jy ! Component: 2850 - total flux cleaned = -0.0112841 Jy ! Component: 2900 - total flux cleaned = -0.0113601 Jy ! Component: 2950 - total flux cleaned = -0.0113603 Jy ! Component: 3000 - total flux cleaned = -0.0113979 Jy ! Component: 3050 - total flux cleaned = -0.0115855 Jy ! Component: 3100 - total flux cleaned = -0.0117346 Jy ! Component: 3150 - total flux cleaned = -0.0117344 Jy ! Component: 3200 - total flux cleaned = -0.0118081 Jy ! Component: 3250 - total flux cleaned = -0.0118819 Jy ! Component: 3300 - total flux cleaned = -0.0119186 Jy ! Component: 3350 - total flux cleaned = -0.0121738 Jy ! Component: 3400 - total flux cleaned = -0.0121375 Jy ! Component: 3450 - total flux cleaned = -0.0121015 Jy ! Component: 3500 - total flux cleaned = -0.0122807 Jy ! Component: 3550 - total flux cleaned = -0.0121734 Jy ! Component: 3600 - total flux cleaned = -0.01228 Jy ! Component: 3650 - total flux cleaned = -0.0123862 Jy ! Component: 3700 - total flux cleaned = -0.012351 Jy ! Component: 3750 - total flux cleaned = -0.0123509 Jy ! Component: 3800 - total flux cleaned = -0.0122813 Jy ! Component: 3850 - total flux cleaned = -0.0123507 Jy ! Component: 3900 - total flux cleaned = -0.0122473 Jy ! Component: 3950 - total flux cleaned = -0.0122821 Jy ! Component: 4000 - total flux cleaned = -0.012453 Jy ! Component: 4050 - total flux cleaned = -0.0123509 Jy ! Total flux subtracted in 4096 components = -0.012317 Jy ! Clean residual min=-0.001735 max=0.002531 Jy/beam ! Clean residual mean=-0.000016 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.597281 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 521 components and 0.59728 Jy ![Exited script file: muppet] wmap "J1316-3338_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.416 x 10.95 at 5.911 degrees (North through East) ! Clean map min=-0.0033527 max=0.33698 Jy/beam ! Writing clean map to FITS file: J1316-3338_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.336981 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00067537 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.601253 0.601253 1.20251 2.40501 4.81003 9.62006 19.2401 38.4802 76.9604 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.336 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.416 x 10.95 at 5.911 degrees (North through East) ! Clean map min=-0.0033527 max=0.33698 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1316-3338_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:00:34 2019