! Started logfile: J1316-3338_S_2017_02_24_pus_uvs.log on Sat May 4 11:27:50 2019 obs J1316-3338_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1316-3338_S_2017_02_24_pus_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.677222 visibilities/baseline/integration-bin. ! Found source: J1316-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 4876 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1316-3338_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.749017Jy sigma=0.033588 ! Fit after self-cal, rms=0.690440Jy sigma=0.033436 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=9.292 mas, bpa=-7.237 degrees ! Estimated noise=1282.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127901 Jy ! Component: 100 - total flux cleaned = 0.18725 Jy ! Total flux subtracted in 100 components = 0.18725 Jy ! Clean residual min=-0.053167 max=0.055005 Jy/beam ! Clean residual mean=0.000215 rms=0.015936 Jy/beam ! Combined flux in latest and established models = 0.18725 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.18725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311170Jy sigma=0.005611 ! Fit after self-cal, rms=0.310385Jy sigma=0.005575 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=11.22 mas, bpa=-3.725 degrees ! Estimated noise=1057.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0564407 Jy ! Component: 100 - total flux cleaned = 0.0794194 Jy ! Component: 150 - total flux cleaned = 0.0859891 Jy ! Component: 200 - total flux cleaned = 0.086779 Jy ! Total flux subtracted in 200 components = 0.086779 Jy ! Clean residual min=-0.063624 max=0.077081 Jy/beam ! Clean residual mean=0.001245 rms=0.023250 Jy/beam ! Combined flux in latest and established models = 0.274029 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.274029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261705Jy sigma=0.007768 ! Fit after self-cal, rms=0.261650Jy sigma=0.007767 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.62 FD 0.72 HN 1.19 KP 0.68 ! LA 0.67 MK 0.94 NL 0.85 OV 0.76 ! PT 0.70 SC 0.72 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.67 FD 0.66 HN 1.24 KP 0.64 ! LA 0.65 MK 1.03 NL 0.86 OV 0.77 ! PT 0.68 SC 0.80 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.67 HN 1.09 KP 0.73 ! LA 0.71 MK 1.11 NL 0.95 OV 0.73 ! PT 0.66 SC 0.87 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.71 FD 0.72 HN 1.17 KP 1.00* ! LA 32.11 MK 1.08 NL 1.00* OV 0.74 ! PT 0.72 SC 1.00* ! ! ! Fit before self-cal, rms=0.261650Jy sigma=0.007767 ! Fit after self-cal, rms=3.523197Jy sigma=0.000885 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=9.823 mas, bpa=1.1 degrees ! Estimated noise=1056.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151651 Jy ! Component: 100 - total flux cleaned = 0.023363 Jy ! Component: 150 - total flux cleaned = 0.0255384 Jy ! Component: 200 - total flux cleaned = 0.0267701 Jy ! Total flux subtracted in 200 components = 0.0267701 Jy ! Clean residual min=-0.008212 max=0.008667 Jy/beam ! Clean residual mean=-0.000046 rms=0.001875 Jy/beam ! Combined flux in latest and established models = 0.300799 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 48 components and 0.300799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.521571Jy sigma=0.000870 ! Fit after self-cal, rms=3.522027Jy sigma=0.000855 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.522027Jy sigma=0.000855 ! Fit after self-cal, rms=3.703630Jy sigma=0.000820 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.464 mas, bmaj=9.709 mas, bpa=1.097 degrees ! Estimated noise=1065.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106246 Jy ! Component: 100 - total flux cleaned = 0.0163645 Jy ! Component: 150 - total flux cleaned = 0.0194232 Jy ! Component: 200 - total flux cleaned = 0.0200314 Jy ! Total flux subtracted in 200 components = 0.0200314 Jy ! Clean residual min=-0.006621 max=0.007086 Jy/beam ! Clean residual mean=-0.000066 rms=0.001704 Jy/beam ! Combined flux in latest and established models = 0.320831 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.320831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.702143Jy sigma=0.000819 ! Fit after self-cal, rms=3.702147Jy sigma=0.000817 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163659 Jy ! Component: 100 - total flux cleaned = 0.00174387 Jy ! Component: 150 - total flux cleaned = 0.00203168 Jy ! Component: 200 - total flux cleaned = 0.0022123 Jy ! Total flux subtracted in 200 components = 0.0022123 Jy ! Clean residual min=-0.006541 max=0.006415 Jy/beam ! Clean residual mean=-0.000064 rms=0.001666 Jy/beam ! Combined flux in latest and established models = 0.323043 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.323043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.702069Jy sigma=0.000816 ! Fit after self-cal, rms=3.702073Jy sigma=0.000816 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.702073Jy sigma=0.000816 ! Fit after self-cal, rms=0.081558Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.401 mas, bmaj=9.552 mas, bpa=1.486 degrees ! Estimated noise=1044.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413679 Jy ! Component: 100 - total flux cleaned = 0.000767508 Jy ! Component: 150 - total flux cleaned = 0.000988852 Jy ! Component: 200 - total flux cleaned = 0.00105808 Jy ! Total flux subtracted in 200 components = 0.00105808 Jy ! Clean residual min=-0.003343 max=0.003225 Jy/beam ! Clean residual mean=-0.000000 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.324101 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.324101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081304Jy sigma=0.000657 ! Fit after self-cal, rms=0.080909Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00048351 Jy ! Component: 100 - total flux cleaned = 0.000619667 Jy ! Component: 150 - total flux cleaned = 0.000680955 Jy ! Component: 200 - total flux cleaned = 0.000680695 Jy ! Total flux subtracted in 200 components = 0.000680695 Jy ! Clean residual min=-0.003268 max=0.002993 Jy/beam ! Clean residual mean=0.000000 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.324782 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.324782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080756Jy sigma=0.000655 ! Fit after self-cal, rms=0.080715Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080715Jy sigma=0.000654 ! Fit after self-cal, rms=0.079074Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.653 mas, bmaj=24.79 mas, bpa=5.569 degrees ! Estimated noise=1219.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000837719 Jy ! Component: 100 - total flux cleaned = 0.00103918 Jy ! Component: 150 - total flux cleaned = 0.00106996 Jy ! Component: 200 - total flux cleaned = 0.001099 Jy ! Total flux subtracted in 200 components = 0.001099 Jy ! Clean residual min=-0.002812 max=0.002466 Jy/beam ! Clean residual mean=0.000000 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.325881 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 98 components and 0.325881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079011Jy sigma=0.000654 ! Fit after self-cal, rms=0.078959Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.55842e-05 Jy ! Component: 100 - total flux cleaned = 0.000109302 Jy ! Component: 150 - total flux cleaned = 0.000138647 Jy ! Component: 200 - total flux cleaned = 0.000166299 Jy ! Total flux subtracted in 200 components = 0.000166299 Jy ! Clean residual min=-0.002742 max=0.002391 Jy/beam ! Clean residual mean=0.000000 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.326047 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 100 components and 0.326047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078912Jy sigma=0.000653 ! Fit after self-cal, rms=0.078877Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=9.445 mas, bpa=1.661 degrees ! Estimated noise=1034.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.369 x 9.445 at 1.661 degrees (North through East) ! Clean map min=-0.0029201 max=0.18881 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.626 mas, bmaj=7.591 mas, bpa=-0.3868 degrees ! Estimated noise=1405.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145207 Jy ! Component: 100 - total flux cleaned = 0.210335 Jy ! Component: 150 - total flux cleaned = 0.245915 Jy ! Component: 200 - total flux cleaned = 0.267388 Jy ! Total flux subtracted in 200 components = 0.267388 Jy ! Clean residual min=-0.005671 max=0.011451 Jy/beam ! Clean residual mean=-0.000010 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.267388 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.267388 Jy ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=9.445 mas, bpa=1.661 degrees ! Estimated noise=1034.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206357 Jy ! Component: 100 - total flux cleaned = 0.0331922 Jy ! Component: 150 - total flux cleaned = 0.0415747 Jy ! Component: 200 - total flux cleaned = 0.0473549 Jy ! Total flux subtracted in 200 components = 0.0473549 Jy ! Clean residual min=-0.003233 max=0.004348 Jy/beam ! Clean residual mean=-0.000013 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.314743 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 72 components and 0.314742 Jy ! Inverting map ! Added new window around map position (-18.5, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451751 Jy ! Component: 100 - total flux cleaned = 0.00767308 Jy ! Component: 150 - total flux cleaned = 0.010001 Jy ! Component: 200 - total flux cleaned = 0.0110351 Jy ! Total flux subtracted in 200 components = 0.0110351 Jy ! Clean residual min=-0.002633 max=0.002837 Jy/beam ! Clean residual mean=0.000001 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.325778 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 0.325778 Jy ! Inverting map ! Added new window around map position (-16.5, -64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167177 Jy ! Component: 100 - total flux cleaned = 0.00206899 Jy ! Component: 150 - total flux cleaned = 0.00231207 Jy ! Component: 200 - total flux cleaned = 0.00259012 Jy ! Total flux subtracted in 200 components = 0.00259012 Jy ! Clean residual min=-0.002507 max=0.002752 Jy/beam ! Clean residual mean=0.000001 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.328368 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 0.328368 Jy ! Inverting map ! Added new window around map position (94.5, 21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177268 Jy ! Component: 100 - total flux cleaned = 0.00164228 Jy ! Component: 150 - total flux cleaned = 0.00175322 Jy ! Component: 200 - total flux cleaned = 0.00180498 Jy ! Total flux subtracted in 200 components = 0.00180498 Jy ! Clean residual min=-0.002438 max=0.002735 Jy/beam ! Clean residual mean=-0.000001 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.330173 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 114 components and 0.330173 Jy ! Inverting map ! Added new window around map position (-15.5, 93). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190883 Jy ! Component: 100 - total flux cleaned = 0.00208481 Jy ! Component: 150 - total flux cleaned = 0.00219187 Jy ! Component: 200 - total flux cleaned = 0.00214277 Jy ! Total flux subtracted in 200 components = 0.00214277 Jy ! Clean residual min=-0.002431 max=0.002242 Jy/beam ! Clean residual mean=0.000003 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.332315 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 128 components and 0.332316 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.653 mas, bmaj=24.79 mas, bpa=5.569 degrees ! Estimated noise=1219.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000247987 Jy ! Component: 100 - total flux cleaned = -0.000354153 Jy ! Component: 150 - total flux cleaned = -0.000386316 Jy ! Component: 200 - total flux cleaned = -0.000447281 Jy ! Total flux subtracted in 200 components = -0.000447281 Jy ! Clean residual min=-0.002353 max=0.002264 Jy/beam ! Clean residual mean=0.000005 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.331868 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.79426e-05 Jy ! Component: 100 - total flux cleaned = -8.51518e-05 Jy ! Component: 150 - total flux cleaned = -8.50607e-05 Jy ! Component: 200 - total flux cleaned = -0.0001101 Jy ! Total flux subtracted in 200 components = -0.0001101 Jy ! Clean residual min=-0.002293 max=0.002269 Jy/beam ! Clean residual mean=0.000004 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.331758 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 149 components and 0.331758 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=9.445 mas, bpa=1.661 degrees ! Estimated noise=1034.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356313 Jy ! Component: 100 - total flux cleaned = 0.000401096 Jy ! Component: 150 - total flux cleaned = 0.000529572 Jy ! Component: 200 - total flux cleaned = 0.000610384 Jy ! Total flux subtracted in 200 components = 0.000610384 Jy ! Clean residual min=-0.002341 max=0.002170 Jy/beam ! Clean residual mean=0.000003 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.332369 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 167 components and 0.332369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078131Jy sigma=0.000647 ! Fit after self-cal, rms=0.078036Jy sigma=0.000647 wmodel J1316-3338_S_2017_02_24_pus_map.mod ! Writing 167 model components to file: J1316-3338_S_2017_02_24_pus_map.mod wobs J1316-3338_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1316-3338_S_2017_02_24_pus_uvs.fits wwins J1316-3338_S_2017_02_24_pus_map.win ! wwins: Wrote 6 windows to J1316-3338_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000821425 Jy ! Component: 100 - total flux cleaned = -0.00133275 Jy ! Component: 150 - total flux cleaned = -0.0017806 Jy ! Component: 200 - total flux cleaned = -0.00210228 Jy ! Component: 250 - total flux cleaned = -0.00224089 Jy ! Component: 300 - total flux cleaned = -0.00234271 Jy ! Component: 350 - total flux cleaned = -0.0024762 Jy ! Component: 400 - total flux cleaned = -0.00260722 Jy ! Component: 450 - total flux cleaned = -0.00280002 Jy ! Component: 500 - total flux cleaned = -0.00295718 Jy ! Component: 550 - total flux cleaned = -0.00314354 Jy ! Component: 600 - total flux cleaned = -0.00329686 Jy ! Component: 650 - total flux cleaned = -0.0034788 Jy ! Component: 700 - total flux cleaned = -0.00371804 Jy ! Component: 750 - total flux cleaned = -0.00392519 Jy ! Component: 800 - total flux cleaned = -0.00410009 Jy ! Component: 850 - total flux cleaned = -0.00421556 Jy ! Component: 900 - total flux cleaned = -0.00430127 Jy ! Component: 950 - total flux cleaned = -0.00444272 Jy ! Component: 1000 - total flux cleaned = -0.00444228 Jy ! Component: 1050 - total flux cleaned = -0.0045809 Jy ! Component: 1100 - total flux cleaned = -0.00463573 Jy ! Component: 1150 - total flux cleaned = -0.00466296 Jy ! Component: 1200 - total flux cleaned = -0.00469013 Jy ! Component: 1250 - total flux cleaned = -0.00482368 Jy ! Component: 1300 - total flux cleaned = -0.00482379 Jy ! Component: 1350 - total flux cleaned = -0.00495533 Jy ! Component: 1400 - total flux cleaned = -0.00508576 Jy ! Component: 1450 - total flux cleaned = -0.00513749 Jy ! Component: 1500 - total flux cleaned = -0.00531724 Jy ! Component: 1550 - total flux cleaned = -0.00541906 Jy ! Component: 1600 - total flux cleaned = -0.00546935 Jy ! Component: 1650 - total flux cleaned = -0.00556949 Jy ! Component: 1700 - total flux cleaned = -0.00564432 Jy ! Component: 1750 - total flux cleaned = -0.00566874 Jy ! Component: 1800 - total flux cleaned = -0.00569339 Jy ! Component: 1850 - total flux cleaned = -0.00576631 Jy ! Component: 1900 - total flux cleaned = -0.00574252 Jy ! Component: 1950 - total flux cleaned = -0.00581442 Jy ! Component: 2000 - total flux cleaned = -0.00590966 Jy ! Component: 2050 - total flux cleaned = -0.00586231 Jy ! Component: 2100 - total flux cleaned = -0.0058858 Jy ! Component: 2150 - total flux cleaned = -0.00583909 Jy ! Component: 2200 - total flux cleaned = -0.00583909 Jy ! Component: 2250 - total flux cleaned = -0.00588523 Jy ! Component: 2300 - total flux cleaned = -0.00588509 Jy ! Component: 2350 - total flux cleaned = -0.00588526 Jy ! Component: 2400 - total flux cleaned = -0.00590798 Jy ! Component: 2450 - total flux cleaned = -0.00588571 Jy ! Component: 2500 - total flux cleaned = -0.00590818 Jy ! Component: 2550 - total flux cleaned = -0.00593042 Jy ! Component: 2600 - total flux cleaned = -0.0059305 Jy ! Component: 2650 - total flux cleaned = -0.00588655 Jy ! Component: 2700 - total flux cleaned = -0.00590832 Jy ! Component: 2750 - total flux cleaned = -0.0059302 Jy ! Component: 2800 - total flux cleaned = -0.00588705 Jy ! Component: 2850 - total flux cleaned = -0.00588721 Jy ! Component: 2900 - total flux cleaned = -0.00597211 Jy ! Component: 2950 - total flux cleaned = -0.00599333 Jy ! Component: 3000 - total flux cleaned = -0.0059302 Jy ! Component: 3050 - total flux cleaned = -0.0060349 Jy ! Component: 3100 - total flux cleaned = -0.00582621 Jy ! Component: 3150 - total flux cleaned = -0.00592988 Jy ! Component: 3200 - total flux cleaned = -0.00590902 Jy ! Component: 3250 - total flux cleaned = -0.00609353 Jy ! Component: 3300 - total flux cleaned = -0.00593022 Jy ! Component: 3350 - total flux cleaned = -0.00599123 Jy ! Component: 3400 - total flux cleaned = -0.00599133 Jy ! Component: 3450 - total flux cleaned = -0.00601157 Jy ! Component: 3500 - total flux cleaned = -0.00603146 Jy ! Component: 3550 - total flux cleaned = -0.0060913 Jy ! Component: 3600 - total flux cleaned = -0.00609121 Jy ! Component: 3650 - total flux cleaned = -0.00615041 Jy ! Component: 3700 - total flux cleaned = -0.00618971 Jy ! Component: 3750 - total flux cleaned = -0.00618979 Jy ! Component: 3800 - total flux cleaned = -0.00628724 Jy ! Component: 3850 - total flux cleaned = -0.00636477 Jy ! Component: 3900 - total flux cleaned = -0.00644201 Jy ! Component: 3950 - total flux cleaned = -0.00642264 Jy ! Component: 4000 - total flux cleaned = -0.00653738 Jy ! Component: 4050 - total flux cleaned = -0.00657545 Jy ! Total flux subtracted in 4096 components = -0.00655649 Jy ! Clean residual min=-0.001106 max=0.001025 Jy/beam ! Clean residual mean=-0.000003 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.325812 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 443 components and 0.325812 Jy ![Exited script file: muppet] wmap "J1316-3338_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.369 x 9.445 at 1.661 degrees (North through East) ! Clean map min=-0.0023087 max=0.1875 Jy/beam ! Writing clean map to FITS file: J1316-3338_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.187501 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000354083 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.566529 0.566529 1.13306 2.26612 4.53223 9.06446 18.1289 36.2579 72.5157 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.187 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.369 x 9.445 at 1.661 degrees (North through East) ! Clean map min=-0.0023087 max=0.1875 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1316-3338_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:27:55 2019