! Started logfile: J1316-3338_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:14:21 2019 obs J1316-3338_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1316-3338_S_2017_01_16_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.191111 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1316-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1316-3338_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.729369Jy sigma=0.003848 ! Fit after self-cal, rms=0.715394Jy sigma=0.003796 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.78 mas, bmaj=26.72 mas, bpa=24.16 degrees ! Estimated noise=10025.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.22584 Jy ! Component: 100 - total flux cleaned = 0.333016 Jy ! Total flux subtracted in 100 components = 0.333016 Jy ! Clean residual min=-0.041745 max=0.052330 Jy/beam ! Clean residual mean=0.001754 rms=0.017716 Jy/beam ! Combined flux in latest and established models = 0.333016 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.333016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251582Jy sigma=0.000972 ! Fit after self-cal, rms=0.250722Jy sigma=0.000966 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=25.87 mas, bpa=23.14 degrees ! Estimated noise=7898.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0902299 Jy ! Component: 100 - total flux cleaned = 0.135165 Jy ! Component: 150 - total flux cleaned = 0.151749 Jy ! Component: 200 - total flux cleaned = 0.151985 Jy ! Total flux subtracted in 200 components = 0.151985 Jy ! Clean residual min=-0.017241 max=0.017157 Jy/beam ! Clean residual mean=-0.000325 rms=0.008643 Jy/beam ! Combined flux in latest and established models = 0.485001 Jy ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 103 components and 0.485001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197098Jy sigma=0.000679 ! Fit after self-cal, rms=0.195901Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00* KP 1.00* ! LA 1.00 MK 1.00* NL 0.95 OV 1.00* ! PT 0.95 SC 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00* KP 1.00* ! LA 0.96 MK 1.00* NL 1.03 OV 1.00* ! PT 0.97 SC 1.03 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 1.00* KP 1.00* ! LA 1.00 MK 1.00* NL 1.08 OV 1.00* ! PT 0.91 SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* HN 1.00* KP 1.00* ! LA 0.51 MK 1.00* NL 1.00* OV 1.00* ! PT 0.93 SC 1.08 ! ! ! Fit before self-cal, rms=0.195901Jy sigma=0.000675 ! Fit after self-cal, rms=0.133701Jy sigma=0.000621 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=25.51 mas, bpa=23.08 degrees ! Estimated noise=7881.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183623 Jy ! Component: 100 - total flux cleaned = 0.00251059 Jy ! Component: 150 - total flux cleaned = 0.00500232 Jy ! Component: 200 - total flux cleaned = 0.00597321 Jy ! Total flux subtracted in 200 components = 0.00597321 Jy ! Clean residual min=-0.005625 max=0.005841 Jy/beam ! Clean residual mean=0.000025 rms=0.001667 Jy/beam ! Combined flux in latest and established models = 0.490974 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 137 components and 0.490974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132134Jy sigma=0.000615 ! Fit after self-cal, rms=0.131620Jy sigma=0.000614 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131620Jy sigma=0.000614 ! Fit after self-cal, rms=0.130161Jy sigma=0.000613 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=25.45 mas, bpa=23.1 degrees ! Estimated noise=7847.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148184 Jy ! Component: 100 - total flux cleaned = 0.00296234 Jy ! Component: 150 - total flux cleaned = 0.00394679 Jy ! Component: 200 - total flux cleaned = 0.00451678 Jy ! Total flux subtracted in 200 components = 0.00451678 Jy ! Clean residual min=-0.003154 max=0.003145 Jy/beam ! Clean residual mean=0.000014 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.495491 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 182 components and 0.49549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129182Jy sigma=0.000611 ! Fit after self-cal, rms=0.128982Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000710726 Jy ! Component: 100 - total flux cleaned = 0.00118535 Jy ! Component: 150 - total flux cleaned = 0.00164048 Jy ! Component: 200 - total flux cleaned = 0.00221763 Jy ! Total flux subtracted in 200 components = 0.00221763 Jy ! Clean residual min=-0.002374 max=0.002352 Jy/beam ! Clean residual mean=-0.000018 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.497708 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 226 components and 0.497708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128378Jy sigma=0.000610 ! Fit after self-cal, rms=0.128304Jy sigma=0.000610 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128304Jy sigma=0.000610 ! Fit after self-cal, rms=0.127585Jy sigma=0.000610 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=25.49 mas, bpa=23.1 degrees ! Estimated noise=7835.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000901524 Jy ! Component: 100 - total flux cleaned = 0.00143292 Jy ! Component: 150 - total flux cleaned = 0.00205925 Jy ! Component: 200 - total flux cleaned = 0.00265902 Jy ! Total flux subtracted in 200 components = 0.00265902 Jy ! Clean residual min=-0.001949 max=0.001955 Jy/beam ! Clean residual mean=-0.000005 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.500367 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 262 components and 0.500367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127170Jy sigma=0.000609 ! Fit after self-cal, rms=0.127113Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244568 Jy ! Component: 100 - total flux cleaned = 0.000352275 Jy ! Component: 150 - total flux cleaned = 0.000665877 Jy ! Component: 200 - total flux cleaned = 0.00117571 Jy ! Total flux subtracted in 200 components = 0.00117571 Jy ! Clean residual min=-0.001677 max=0.001672 Jy/beam ! Clean residual mean=-0.000007 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.501543 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 296 components and 0.501543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126812Jy sigma=0.000609 ! Fit after self-cal, rms=0.126774Jy sigma=0.000609 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126774Jy sigma=0.000609 ! Fit after self-cal, rms=0.126165Jy sigma=0.000609 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.75 mas, bmaj=29.46 mas, bpa=13.21 degrees ! Estimated noise=9886.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225151 Jy ! Component: 100 - total flux cleaned = 0.000385069 Jy ! Component: 150 - total flux cleaned = 0.000494492 Jy ! Component: 200 - total flux cleaned = 0.000768464 Jy ! Total flux subtracted in 200 components = 0.000768464 Jy ! Clean residual min=-0.002771 max=0.002923 Jy/beam ! Clean residual mean=0.000021 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.502312 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 320 components and 0.502312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126210Jy sigma=0.000609 ! Fit after self-cal, rms=0.126216Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000686561 Jy ! Component: 100 - total flux cleaned = 0.00069327 Jy ! Component: 150 - total flux cleaned = 0.000701165 Jy ! Component: 200 - total flux cleaned = 0.00070622 Jy ! Total flux subtracted in 200 components = 0.00070622 Jy ! Clean residual min=-0.002533 max=0.002425 Jy/beam ! Clean residual mean=-0.000017 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.503018 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 357 components and 0.503018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126172Jy sigma=0.000609 ! Fit after self-cal, rms=0.126129Jy sigma=0.000609 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=25.52 mas, bpa=23.11 degrees ! Estimated noise=7816.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 25.52 at 23.11 degrees (North through East) ! Clean map min=-0.016906 max=0.25916 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=25.25 mas, bpa=24.06 degrees ! Estimated noise=9282.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.19702 Jy ! Component: 100 - total flux cleaned = 0.299277 Jy ! Component: 150 - total flux cleaned = 0.357413 Jy ! Component: 200 - total flux cleaned = 0.378506 Jy ! Total flux subtracted in 200 components = 0.378506 Jy ! Clean residual min=-0.023776 max=0.023953 Jy/beam ! Clean residual mean=-0.000933 rms=0.009643 Jy/beam ! Combined flux in latest and established models = 0.378506 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.378506 Jy ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=25.52 mas, bpa=23.11 degrees ! Estimated noise=7816.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328683 Jy ! Component: 100 - total flux cleaned = 0.0392917 Jy ! Component: 150 - total flux cleaned = 0.0412686 Jy ! Component: 200 - total flux cleaned = 0.041848 Jy ! Total flux subtracted in 200 components = 0.041848 Jy ! Clean residual min=-0.009322 max=0.009333 Jy/beam ! Clean residual mean=-0.000309 rms=0.004185 Jy/beam ! Combined flux in latest and established models = 0.420354 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 116 components and 0.420355 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.75 mas, bmaj=29.46 mas, bpa=13.21 degrees ! Estimated noise=9886.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00909733 Jy ! Component: 100 - total flux cleaned = -0.0146165 Jy ! Component: 150 - total flux cleaned = -0.0146109 Jy ! Component: 200 - total flux cleaned = -0.014641 Jy ! Total flux subtracted in 200 components = -0.014641 Jy ! Clean residual min=-0.010256 max=0.010857 Jy/beam ! Clean residual mean=0.000296 rms=0.002667 Jy/beam ! Combined flux in latest and established models = 0.405714 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725934 Jy ! Component: 100 - total flux cleaned = 0.00179928 Jy ! Component: 150 - total flux cleaned = 0.00339332 Jy ! Component: 200 - total flux cleaned = 0.00572705 Jy ! Total flux subtracted in 200 components = 0.00572705 Jy ! Clean residual min=-0.048249 max=0.051575 Jy/beam ! Clean residual mean=0.001728 rms=0.011837 Jy/beam ! Combined flux in latest and established models = 0.411441 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 170 components and 0.411441 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=25.52 mas, bpa=23.11 degrees ! Estimated noise=7816.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00939321 Jy ! Component: 100 - total flux cleaned = 0.00926933 Jy ! Component: 150 - total flux cleaned = 0.00917144 Jy ! Component: 200 - total flux cleaned = 0.00590261 Jy ! Total flux subtracted in 200 components = 0.00590261 Jy ! Clean residual min=-0.030882 max=0.029567 Jy/beam ! Clean residual mean=-0.000705 rms=0.004810 Jy/beam ! Combined flux in latest and established models = 0.417343 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 181 components and 0.417343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129890Jy sigma=0.000629 ! Fit after self-cal, rms=0.128412Jy sigma=0.000625 wmodel J1316-3338_S_2017_01_16_pus_map.mod ! Writing 181 model components to file: J1316-3338_S_2017_01_16_pus_map.mod wobs J1316-3338_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1316-3338_S_2017_01_16_pus_uvs.fits wwins J1316-3338_S_2017_01_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1316-3338_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 25.52 at 23.11 degrees (North through East) ! Clean map min=-0.045524 max=0.26322 Jy/beam ! Writing clean map to FITS file: J1316-3338_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.263222 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00414507 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.72423 4.72423 9.44845 18.8969 37.7938 75.5876 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0124 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.263 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 25.52 at 23.11 degrees (North through East) ! Clean map min=-0.045524 max=0.26322 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1316-3338_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:14:24 2019