! Started logfile: J1313-2722_S_2017_05_27_pus_uvs.log on Fri May 3 11:08:11 2019 obs J1313-2722_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1313-2722_S_2017_05_27_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.927011 visibilities/baseline/integration-bin. ! Found source: J1313-2722 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 19356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1313-2722_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 624 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.939851Jy sigma=0.024803 ! Fit after self-cal, rms=0.912875Jy sigma=0.024744 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.675 mas, bmaj=6.918 mas, bpa=-5.16 degrees ! Estimated noise=1227.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0585524 Jy ! Component: 100 - total flux cleaned = 0.0731185 Jy ! Total flux subtracted in 100 components = 0.0731185 Jy ! Clean residual min=-0.013989 max=0.019005 Jy/beam ! Clean residual mean=-0.000016 rms=0.004114 Jy/beam ! Combined flux in latest and established models = 0.0731185 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0731185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178054Jy sigma=0.001764 ! Fit after self-cal, rms=0.178050Jy sigma=0.001760 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=8.205 mas, bpa=-5.844 degrees ! Estimated noise=652.565 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00387125 Jy ! Component: 100 - total flux cleaned = -0.00387628 Jy ! Component: 150 - total flux cleaned = -0.00389107 Jy ! Component: 200 - total flux cleaned = -0.00388874 Jy ! Total flux subtracted in 200 components = -0.00388874 Jy ! Clean residual min=-0.015503 max=0.022999 Jy/beam ! Clean residual mean=-0.000059 rms=0.004882 Jy/beam ! Combined flux in latest and established models = 0.0692298 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 12 components and 0.0692298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178472Jy sigma=0.001662 ! Fit after self-cal, rms=0.178426Jy sigma=0.001662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 0.76 HN 1.02 KP 0.77 ! LA 0.74 MK 1.05 NL 0.72 OV 0.80 ! PT 0.79 SC 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 18.27 FD 0.83 HN 1.25 KP 0.77 ! LA 0.77 MK 0.98 NL 0.95 OV 0.89 ! PT 0.81 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.80 HN 0.93 KP 0.76 ! LA 0.73 MK 0.98 NL 0.79 OV 0.74 ! PT 0.80 SC 0.93 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.81 HN 0.84 KP 1.00* ! LA 0.51 MK 0.90 NL 1.00* OV 1.00* ! PT 0.78 SC 1.00* ! ! ! Fit before self-cal, rms=0.178426Jy sigma=0.001662 ! Fit after self-cal, rms=0.379604Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=8.384 mas, bpa=-5.685 degrees ! Estimated noise=680.241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141686 Jy ! Component: 100 - total flux cleaned = 0.0015317 Jy ! Component: 150 - total flux cleaned = 0.00170413 Jy ! Component: 200 - total flux cleaned = 0.00184736 Jy ! Total flux subtracted in 200 components = 0.00184736 Jy ! Clean residual min=-0.002348 max=0.002370 Jy/beam ! Clean residual mean=-0.000019 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0710772 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.0710772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.379328Jy sigma=0.000684 ! Fit after self-cal, rms=0.379200Jy sigma=0.000666 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215777 Jy ! Component: 100 - total flux cleaned = 0.00224918 Jy ! Component: 150 - total flux cleaned = 0.00225484 Jy ! Component: 200 - total flux cleaned = 0.00231832 Jy ! Total flux subtracted in 200 components = 0.00231832 Jy ! Clean residual min=-0.002051 max=0.002240 Jy/beam ! Clean residual mean=-0.000010 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0733955 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.0733955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378913Jy sigma=0.000665 ! Fit after self-cal, rms=0.378900Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378900Jy sigma=0.000665 ! Fit after self-cal, rms=0.538354Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.419 mas, bpa=-6.111 degrees ! Estimated noise=685.997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108293 Jy ! Component: 100 - total flux cleaned = 0.00108538 Jy ! Component: 150 - total flux cleaned = 0.00104856 Jy ! Component: 200 - total flux cleaned = 0.0010136 Jy ! Total flux subtracted in 200 components = 0.0010136 Jy ! Clean residual min=-0.002062 max=0.002071 Jy/beam ! Clean residual mean=-0.000010 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0744091 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 48 components and 0.0744091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.538224Jy sigma=0.000661 ! Fit after self-cal, rms=0.538215Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.64324e-05 Jy ! Component: 100 - total flux cleaned = -6.77508e-05 Jy ! Component: 150 - total flux cleaned = -9.74434e-05 Jy ! Component: 200 - total flux cleaned = -0.00012328 Jy ! Total flux subtracted in 200 components = -0.00012328 Jy ! Clean residual min=-0.002057 max=0.002073 Jy/beam ! Clean residual mean=-0.000010 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0742858 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 0.0742858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.538157Jy sigma=0.000661 ! Fit after self-cal, rms=0.538155Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.538155Jy sigma=0.000661 ! Fit after self-cal, rms=0.572904Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=8.401 mas, bpa=-6.101 degrees ! Estimated noise=694.422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117206 Jy ! Component: 100 - total flux cleaned = 0.00123535 Jy ! Component: 150 - total flux cleaned = 0.00123656 Jy ! Component: 200 - total flux cleaned = 0.00121063 Jy ! Total flux subtracted in 200 components = 0.00121063 Jy ! Clean residual min=-0.002181 max=0.002087 Jy/beam ! Clean residual mean=-0.000011 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0754964 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.0754964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.572805Jy sigma=0.000661 ! Fit after self-cal, rms=0.572799Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.74814e-05 Jy ! Component: 100 - total flux cleaned = -5.26717e-05 Jy ! Component: 150 - total flux cleaned = -9.73822e-05 Jy ! Component: 200 - total flux cleaned = -9.76748e-05 Jy ! Total flux subtracted in 200 components = -9.76748e-05 Jy ! Clean residual min=-0.002172 max=0.002090 Jy/beam ! Clean residual mean=-0.000011 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0753987 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 0.0753987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.572759Jy sigma=0.000661 ! Fit after self-cal, rms=0.572760Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.572760Jy sigma=0.000661 ! Fit after self-cal, rms=0.586289Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.299 mas, bmaj=20.76 mas, bpa=-3.522 degrees ! Estimated noise=819.376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146488 Jy ! Component: 100 - total flux cleaned = 0.00152666 Jy ! Component: 150 - total flux cleaned = 0.00147149 Jy ! Component: 200 - total flux cleaned = 0.00140312 Jy ! Total flux subtracted in 200 components = 0.00140312 Jy ! Clean residual min=-0.002477 max=0.002265 Jy/beam ! Clean residual mean=-0.000021 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.0768018 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.0768018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.586210Jy sigma=0.000661 ! Fit after self-cal, rms=0.586213Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.55859e-05 Jy ! Component: 100 - total flux cleaned = -0.000117803 Jy ! Component: 150 - total flux cleaned = -0.000174148 Jy ! Component: 200 - total flux cleaned = -0.000226613 Jy ! Total flux subtracted in 200 components = -0.000226613 Jy ! Clean residual min=-0.002455 max=0.002310 Jy/beam ! Clean residual mean=-0.000022 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0765752 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 82 components and 0.0765752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.586198Jy sigma=0.000661 ! Fit after self-cal, rms=0.586200Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=8.379 mas, bpa=-6.081 degrees ! Estimated noise=703.01 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.302 x 8.379 at -6.081 degrees (North through East) ! Clean map min=-0.0024741 max=0.077039 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.627 mas, bmaj=6.94 mas, bpa=-6.01 degrees ! Estimated noise=1194.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.058209 Jy ! Component: 100 - total flux cleaned = 0.0727845 Jy ! Component: 150 - total flux cleaned = 0.078024 Jy ! Component: 200 - total flux cleaned = 0.0778902 Jy ! Total flux subtracted in 200 components = 0.0778902 Jy ! Clean residual min=-0.003027 max=0.003709 Jy/beam ! Clean residual mean=-0.000003 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.0778902 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0778902 Jy ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=8.379 mas, bpa=-6.081 degrees ! Estimated noise=703.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178379 Jy ! Component: 100 - total flux cleaned = -0.000402325 Jy ! Component: 150 - total flux cleaned = -0.000583419 Jy ! Component: 200 - total flux cleaned = -0.000688357 Jy ! Total flux subtracted in 200 components = -0.000688357 Jy ! Clean residual min=-0.002177 max=0.002123 Jy/beam ! Clean residual mean=-0.000010 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0772019 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.0772019 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.299 mas, bmaj=20.76 mas, bpa=-3.522 degrees ! Estimated noise=819.376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225813 Jy ! Component: 100 - total flux cleaned = -0.000357276 Jy ! Component: 150 - total flux cleaned = -0.000414884 Jy ! Component: 200 - total flux cleaned = -0.000486549 Jy ! Total flux subtracted in 200 components = -0.000486549 Jy ! Clean residual min=-0.002465 max=0.002303 Jy/beam ! Clean residual mean=-0.000021 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.0767153 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.02965e-05 Jy ! Component: 100 - total flux cleaned = -9.82095e-05 Jy ! Component: 150 - total flux cleaned = -0.000143684 Jy ! Component: 200 - total flux cleaned = -0.000186679 Jy ! Total flux subtracted in 200 components = -0.000186679 Jy ! Clean residual min=-0.002457 max=0.002290 Jy/beam ! Clean residual mean=-0.000022 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.0765286 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.0765286 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=8.379 mas, bpa=-6.081 degrees ! Estimated noise=703.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.54244e-05 Jy ! Component: 100 - total flux cleaned = -0.000166773 Jy ! Component: 150 - total flux cleaned = -0.000198382 Jy ! Component: 200 - total flux cleaned = -0.000256845 Jy ! Total flux subtracted in 200 components = -0.000256845 Jy ! Clean residual min=-0.002188 max=0.002063 Jy/beam ! Clean residual mean=-0.000012 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0762718 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 62 components and 0.0762718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.586204Jy sigma=0.000661 ! Fit after self-cal, rms=0.586210Jy sigma=0.000661 wmodel J1313-2722_S_2017_05_27_pus_map.mod ! Writing 62 model components to file: J1313-2722_S_2017_05_27_pus_map.mod wobs J1313-2722_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1313-2722_S_2017_05_27_pus_uvs.fits wwins J1313-2722_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1313-2722_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.29925e-05 Jy ! Component: 100 - total flux cleaned = 0.000351738 Jy ! Component: 150 - total flux cleaned = 0.000665138 Jy ! Component: 200 - total flux cleaned = 0.00103306 Jy ! Component: 250 - total flux cleaned = 0.00135509 Jy ! Component: 300 - total flux cleaned = 0.00157336 Jy ! Component: 350 - total flux cleaned = 0.0017248 Jy ! Component: 400 - total flux cleaned = 0.00184203 Jy ! Component: 450 - total flux cleaned = 0.00192808 Jy ! Component: 500 - total flux cleaned = 0.00198465 Jy ! Component: 550 - total flux cleaned = 0.00209511 Jy ! Component: 600 - total flux cleaned = 0.00220229 Jy ! Component: 650 - total flux cleaned = 0.00220238 Jy ! Component: 700 - total flux cleaned = 0.00230592 Jy ! Component: 750 - total flux cleaned = 0.00230603 Jy ! Component: 800 - total flux cleaned = 0.00240468 Jy ! Component: 850 - total flux cleaned = 0.00242876 Jy ! Component: 900 - total flux cleaned = 0.00250014 Jy ! Component: 950 - total flux cleaned = 0.00254722 Jy ! Component: 1000 - total flux cleaned = 0.0025477 Jy ! Component: 1050 - total flux cleaned = 0.00266117 Jy ! Component: 1100 - total flux cleaned = 0.00279444 Jy ! Component: 1150 - total flux cleaned = 0.00290374 Jy ! Component: 1200 - total flux cleaned = 0.00298987 Jy ! Component: 1250 - total flux cleaned = 0.00309595 Jy ! Component: 1300 - total flux cleaned = 0.00324254 Jy ! Component: 1350 - total flux cleaned = 0.00336656 Jy ! Component: 1400 - total flux cleaned = 0.00350962 Jy ! Component: 1450 - total flux cleaned = 0.00363012 Jy ! Component: 1500 - total flux cleaned = 0.00368967 Jy ! Component: 1550 - total flux cleaned = 0.00374856 Jy ! Component: 1600 - total flux cleaned = 0.00384558 Jy ! Component: 1650 - total flux cleaned = 0.00386488 Jy ! Component: 1700 - total flux cleaned = 0.00401675 Jy ! Component: 1750 - total flux cleaned = 0.00414778 Jy ! Component: 1800 - total flux cleaned = 0.0042031 Jy ! Component: 1850 - total flux cleaned = 0.00427614 Jy ! Component: 1900 - total flux cleaned = 0.00433033 Jy ! Component: 1950 - total flux cleaned = 0.00443771 Jy ! Component: 2000 - total flux cleaned = 0.00449096 Jy ! Component: 2050 - total flux cleaned = 0.00464825 Jy ! Component: 2100 - total flux cleaned = 0.00468281 Jy ! Component: 2150 - total flux cleaned = 0.00481938 Jy ! Component: 2200 - total flux cleaned = 0.00485326 Jy ! Component: 2250 - total flux cleaned = 0.00492013 Jy ! Component: 2300 - total flux cleaned = 0.005003 Jy ! Component: 2350 - total flux cleaned = 0.00506829 Jy ! Component: 2400 - total flux cleaned = 0.00508456 Jy ! Component: 2450 - total flux cleaned = 0.00513292 Jy ! Component: 2500 - total flux cleaned = 0.00518081 Jy ! Component: 2550 - total flux cleaned = 0.005165 Jy ! Component: 2600 - total flux cleaned = 0.00524313 Jy ! Component: 2650 - total flux cleaned = 0.0052586 Jy ! Component: 2700 - total flux cleaned = 0.00527366 Jy ! Component: 2750 - total flux cleaned = 0.0053191 Jy ! Component: 2800 - total flux cleaned = 0.00531916 Jy ! Component: 2850 - total flux cleaned = 0.00542359 Jy ! Component: 2900 - total flux cleaned = 0.00539401 Jy ! Component: 2950 - total flux cleaned = 0.0054086 Jy ! Component: 3000 - total flux cleaned = 0.00545213 Jy ! Component: 3050 - total flux cleaned = 0.00543764 Jy ! Component: 3100 - total flux cleaned = 0.00553771 Jy ! Component: 3150 - total flux cleaned = 0.0055659 Jy ! Component: 3200 - total flux cleaned = 0.0055942 Jy ! Component: 3250 - total flux cleaned = 0.00558025 Jy ! Component: 3300 - total flux cleaned = 0.00563587 Jy ! Component: 3350 - total flux cleaned = 0.00563594 Jy ! Component: 3400 - total flux cleaned = 0.00567725 Jy ! Component: 3450 - total flux cleaned = 0.00569084 Jy ! Component: 3500 - total flux cleaned = 0.0057179 Jy ! Component: 3550 - total flux cleaned = 0.00573136 Jy ! Component: 3600 - total flux cleaned = 0.00573139 Jy ! Component: 3650 - total flux cleaned = 0.00575787 Jy ! Component: 3700 - total flux cleaned = 0.00574474 Jy ! Component: 3750 - total flux cleaned = 0.00578385 Jy ! Component: 3800 - total flux cleaned = 0.00575782 Jy ! Component: 3850 - total flux cleaned = 0.0057835 Jy ! Component: 3900 - total flux cleaned = 0.00573224 Jy ! Component: 3950 - total flux cleaned = 0.00577051 Jy ! Component: 4000 - total flux cleaned = 0.00577052 Jy ! Component: 4050 - total flux cleaned = 0.00573284 Jy ! Total flux subtracted in 4096 components = 0.00577035 Jy ! Clean residual min=-0.000660 max=0.000689 Jy/beam ! Clean residual mean=-0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.0820421 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 332 components and 0.0820422 Jy ![Exited script file: muppet] wmap "J1313-2722_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.302 x 8.379 at -6.081 degrees (North through East) ! Clean map min=-0.0021899 max=0.075647 Jy/beam ! Writing clean map to FITS file: J1313-2722_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0756474 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000223832 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.887666 0.887666 1.77533 3.55067 7.10133 14.2027 28.4053 56.8107 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.075 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.302 x 8.379 at -6.081 degrees (North through East) ! Clean map min=-0.0021899 max=0.075647 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1313-2722_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:08:16 2019