! Started logfile: J1310+3233_S_2017_06_15_pus_uvs.log on Tue May 7 15:18:59 2019 obs J1310+3233_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1310+3233_S_2017_06_15_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.852778 visibilities/baseline/integration-bin. ! Found source: J1310+3233 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 1228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1310+3233_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.792134Jy sigma=0.007780 ! Fit after self-cal, rms=0.788913Jy sigma=0.007747 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=8.058 mas, bpa=28.92 degrees ! Estimated noise=2686.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.164713 Jy ! Component: 100 - total flux cleaned = 0.201836 Jy ! Total flux subtracted in 100 components = 0.201836 Jy ! Clean residual min=-0.009901 max=0.014733 Jy/beam ! Clean residual mean=-0.000025 rms=0.002956 Jy/beam ! Combined flux in latest and established models = 0.201836 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.201836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076545Jy sigma=0.000724 ! Fit after self-cal, rms=0.076530Jy sigma=0.000724 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.656 mas, bmaj=8.733 mas, bpa=28.68 degrees ! Estimated noise=2315.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157261 Jy ! Component: 100 - total flux cleaned = 0.0238381 Jy ! Component: 150 - total flux cleaned = 0.0280647 Jy ! Component: 200 - total flux cleaned = 0.0292023 Jy ! Total flux subtracted in 200 components = 0.0292023 Jy ! Clean residual min=-0.006883 max=0.008049 Jy/beam ! Clean residual mean=0.000007 rms=0.001827 Jy/beam ! Combined flux in latest and established models = 0.231039 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 22 components and 0.231039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073334Jy sigma=0.000691 ! Fit after self-cal, rms=0.073302Jy sigma=0.000691 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.99 KP 1.04 ! LA 1.02 MK 1.00 NL 0.87 OV 1.00 ! PT 0.98 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 1.03 KP 0.96 ! LA 0.95 MK 1.12 NL 0.99 OV 0.99 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.08 HN 0.94 KP 0.92 ! LA 1.01 MK 1.07 NL 0.94 OV 0.93 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.95 KP 1.00* ! LA 1.01 MK 1.30 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.073302Jy sigma=0.000691 ! Fit after self-cal, rms=0.071575Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=8.712 mas, bpa=28.78 degrees ! Estimated noise=2300.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104411 Jy ! Component: 100 - total flux cleaned = -0.00104156 Jy ! Component: 150 - total flux cleaned = -0.000991964 Jy ! Component: 200 - total flux cleaned = -0.000946478 Jy ! Total flux subtracted in 200 components = -0.000946478 Jy ! Clean residual min=-0.005854 max=0.005679 Jy/beam ! Clean residual mean=0.000003 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.230092 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.230092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071491Jy sigma=0.000668 ! Fit after self-cal, rms=0.071541Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071541Jy sigma=0.000668 ! Fit after self-cal, rms=0.071555Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.686 mas, bmaj=8.714 mas, bpa=28.79 degrees ! Estimated noise=2296.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000654455 Jy ! Component: 100 - total flux cleaned = -0.00065658 Jy ! Component: 150 - total flux cleaned = -0.000692698 Jy ! Component: 200 - total flux cleaned = -0.000725199 Jy ! Total flux subtracted in 200 components = -0.000725199 Jy ! Clean residual min=-0.005782 max=0.005638 Jy/beam ! Clean residual mean=0.000003 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.229367 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.229367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071511Jy sigma=0.000668 ! Fit after self-cal, rms=0.071511Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.03463e-05 Jy ! Component: 100 - total flux cleaned = 6.05666e-05 Jy ! Component: 150 - total flux cleaned = 3.31259e-05 Jy ! Component: 200 - total flux cleaned = 3.27575e-05 Jy ! Total flux subtracted in 200 components = 3.27575e-05 Jy ! Clean residual min=-0.005720 max=0.005623 Jy/beam ! Clean residual mean=0.000004 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.2294 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.2294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071485Jy sigma=0.000668 ! Fit after self-cal, rms=0.071484Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071484Jy sigma=0.000668 ! Fit after self-cal, rms=0.071460Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=8.718 mas, bpa=28.81 degrees ! Estimated noise=2293.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000514351 Jy ! Component: 100 - total flux cleaned = -0.000593199 Jy ! Component: 150 - total flux cleaned = -0.000616737 Jy ! Component: 200 - total flux cleaned = -0.00059448 Jy ! Total flux subtracted in 200 components = -0.00059448 Jy ! Clean residual min=-0.005659 max=0.005600 Jy/beam ! Clean residual mean=0.000004 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.228805 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.228805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071440Jy sigma=0.000667 ! Fit after self-cal, rms=0.071440Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.00294e-05 Jy ! Component: 100 - total flux cleaned = -1.0285e-05 Jy ! Component: 150 - total flux cleaned = -9.73308e-06 Jy ! Component: 200 - total flux cleaned = -1.0519e-05 Jy ! Total flux subtracted in 200 components = -1.0519e-05 Jy ! Clean residual min=-0.005618 max=0.005594 Jy/beam ! Clean residual mean=0.000004 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.228795 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.228795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071427Jy sigma=0.000667 ! Fit after self-cal, rms=0.071427Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071427Jy sigma=0.000667 ! Fit after self-cal, rms=0.071432Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.316 mas, bmaj=10.83 mas, bpa=16.12 degrees ! Estimated noise=2753.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000969666 Jy ! Component: 100 - total flux cleaned = -0.00105754 Jy ! Component: 150 - total flux cleaned = -0.00115377 Jy ! Component: 200 - total flux cleaned = -0.00118102 Jy ! Total flux subtracted in 200 components = -0.00118102 Jy ! Clean residual min=-0.005111 max=0.004996 Jy/beam ! Clean residual mean=0.000008 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 0.227614 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.227614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071436Jy sigma=0.000667 ! Fit after self-cal, rms=0.071429Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.22949e-05 Jy ! Component: 100 - total flux cleaned = -2.30831e-05 Jy ! Component: 150 - total flux cleaned = -3.5548e-05 Jy ! Component: 200 - total flux cleaned = -4.72966e-05 Jy ! Total flux subtracted in 200 components = -4.72966e-05 Jy ! Clean residual min=-0.005076 max=0.004978 Jy/beam ! Clean residual mean=0.000008 rms=0.001500 Jy/beam ! Combined flux in latest and established models = 0.227566 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.227566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071432Jy sigma=0.000667 ! Fit after self-cal, rms=0.071431Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=8.721 mas, bpa=28.81 degrees ! Estimated noise=2291.39 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.685 x 8.721 at 28.81 degrees (North through East) ! Clean map min=-0.0053298 max=0.21079 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=8.029 mas, bpa=29.06 degrees ! Estimated noise=2659.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.162931 Jy ! Component: 100 - total flux cleaned = 0.199559 Jy ! Component: 150 - total flux cleaned = 0.212858 Jy ! Component: 200 - total flux cleaned = 0.219542 Jy ! Total flux subtracted in 200 components = 0.219542 Jy ! Clean residual min=-0.008608 max=0.006840 Jy/beam ! Clean residual mean=-0.000006 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 0.219542 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.219542 Jy ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=8.721 mas, bpa=28.81 degrees ! Estimated noise=2291.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473693 Jy ! Component: 100 - total flux cleaned = 0.00693268 Jy ! Component: 150 - total flux cleaned = 0.00723635 Jy ! Component: 200 - total flux cleaned = 0.00748901 Jy ! Total flux subtracted in 200 components = 0.00748901 Jy ! Clean residual min=-0.006022 max=0.005549 Jy/beam ! Clean residual mean=0.000002 rms=0.001356 Jy/beam ! Combined flux in latest and established models = 0.227031 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.227031 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.316 mas, bmaj=10.83 mas, bpa=16.12 degrees ! Estimated noise=2753.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436461 Jy ! Component: 100 - total flux cleaned = 0.000430831 Jy ! Component: 150 - total flux cleaned = 0.00046064 Jy ! Component: 200 - total flux cleaned = 0.000486137 Jy ! Total flux subtracted in 200 components = 0.000486137 Jy ! Clean residual min=-0.005066 max=0.004984 Jy/beam ! Clean residual mean=0.000008 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.227518 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.02946e-06 Jy ! Component: 100 - total flux cleaned = 5.45399e-07 Jy ! Component: 150 - total flux cleaned = -1.88985e-05 Jy ! Component: 200 - total flux cleaned = -3.5761e-05 Jy ! Total flux subtracted in 200 components = -3.5761e-05 Jy ! Clean residual min=-0.005044 max=0.004994 Jy/beam ! Clean residual mean=0.000008 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 0.227482 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.227482 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=8.721 mas, bpa=28.81 degrees ! Estimated noise=2291.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000179458 Jy ! Component: 100 - total flux cleaned = -0.000145352 Jy ! Component: 150 - total flux cleaned = -0.000144088 Jy ! Component: 200 - total flux cleaned = -0.000142999 Jy ! Total flux subtracted in 200 components = -0.000142999 Jy ! Clean residual min=-0.005554 max=0.005557 Jy/beam ! Clean residual mean=0.000003 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.227339 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.227339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071458Jy sigma=0.000668 ! Fit after self-cal, rms=0.071458Jy sigma=0.000668 wmodel J1310+3233_S_2017_06_15_pus_map.mod ! Writing 47 model components to file: J1310+3233_S_2017_06_15_pus_map.mod wobs J1310+3233_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1310+3233_S_2017_06_15_pus_uvs.fits wwins J1310+3233_S_2017_06_15_pus_map.win ! wwins: Wrote 1 windows to J1310+3233_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031347 Jy ! Component: 100 - total flux cleaned = 0.000687176 Jy ! Component: 150 - total flux cleaned = 0.000937631 Jy ! Component: 200 - total flux cleaned = 0.00116855 Jy ! Component: 250 - total flux cleaned = 0.00116713 Jy ! Component: 300 - total flux cleaned = 0.00116522 Jy ! Component: 350 - total flux cleaned = 0.00129711 Jy ! Component: 400 - total flux cleaned = 0.00129472 Jy ! Component: 450 - total flux cleaned = 0.00129386 Jy ! Component: 500 - total flux cleaned = 0.00141375 Jy ! Component: 550 - total flux cleaned = 0.00141421 Jy ! Component: 600 - total flux cleaned = 0.00152825 Jy ! Component: 650 - total flux cleaned = 0.00141666 Jy ! Component: 700 - total flux cleaned = 0.0013104 Jy ! Component: 750 - total flux cleaned = 0.00131201 Jy ! Component: 800 - total flux cleaned = 0.00121056 Jy ! Component: 850 - total flux cleaned = 0.00116185 Jy ! Component: 900 - total flux cleaned = 0.00116207 Jy ! Component: 950 - total flux cleaned = 0.00111385 Jy ! Component: 1000 - total flux cleaned = 0.00116108 Jy ! Component: 1050 - total flux cleaned = 0.0011142 Jy ! Component: 1100 - total flux cleaned = 0.00102335 Jy ! Component: 1150 - total flux cleaned = 0.00102286 Jy ! Component: 1200 - total flux cleaned = 0.00110968 Jy ! Component: 1250 - total flux cleaned = 0.00106549 Jy ! Component: 1300 - total flux cleaned = 0.0010658 Jy ! Component: 1350 - total flux cleaned = 0.0011917 Jy ! Component: 1400 - total flux cleaned = 0.00127453 Jy ! Component: 1450 - total flux cleaned = 0.00127488 Jy ! Component: 1500 - total flux cleaned = 0.00135573 Jy ! Component: 1550 - total flux cleaned = 0.00131629 Jy ! Component: 1600 - total flux cleaned = 0.00139491 Jy ! Component: 1650 - total flux cleaned = 0.00139522 Jy ! Component: 1700 - total flux cleaned = 0.00147149 Jy ! Component: 1750 - total flux cleaned = 0.00150861 Jy ! Component: 1800 - total flux cleaned = 0.00158265 Jy ! Component: 1850 - total flux cleaned = 0.00165546 Jy ! Component: 1900 - total flux cleaned = 0.00169123 Jy ! Component: 1950 - total flux cleaned = 0.00172689 Jy ! Component: 2000 - total flux cleaned = 0.00179771 Jy ! Component: 2050 - total flux cleaned = 0.00179761 Jy ! Component: 2100 - total flux cleaned = 0.0017977 Jy ! Component: 2150 - total flux cleaned = 0.00196842 Jy ! Component: 2200 - total flux cleaned = 0.00196846 Jy ! Component: 2250 - total flux cleaned = 0.00200201 Jy ! Component: 2300 - total flux cleaned = 0.00213466 Jy ! Component: 2350 - total flux cleaned = 0.00216763 Jy ! Component: 2400 - total flux cleaned = 0.00229787 Jy ! Component: 2450 - total flux cleaned = 0.00239442 Jy ! Component: 2500 - total flux cleaned = 0.00245844 Jy ! Component: 2550 - total flux cleaned = 0.00258532 Jy ! Component: 2600 - total flux cleaned = 0.00267962 Jy ! Component: 2650 - total flux cleaned = 0.00277274 Jy ! Component: 2700 - total flux cleaned = 0.00280389 Jy ! Component: 2750 - total flux cleaned = 0.00286552 Jy ! Component: 2800 - total flux cleaned = 0.00298693 Jy ! Component: 2850 - total flux cleaned = 0.00304687 Jy ! Component: 2900 - total flux cleaned = 0.00307679 Jy ! Component: 2950 - total flux cleaned = 0.00310648 Jy ! Component: 3000 - total flux cleaned = 0.00316551 Jy ! Component: 3050 - total flux cleaned = 0.003195 Jy ! Component: 3100 - total flux cleaned = 0.00325328 Jy ! Component: 3150 - total flux cleaned = 0.0032532 Jy ! Component: 3200 - total flux cleaned = 0.00325344 Jy ! Component: 3250 - total flux cleaned = 0.0033104 Jy ! Component: 3300 - total flux cleaned = 0.00322526 Jy ! Component: 3350 - total flux cleaned = 0.00328174 Jy ! Component: 3400 - total flux cleaned = 0.00328178 Jy ! Component: 3450 - total flux cleaned = 0.00330957 Jy ! Component: 3500 - total flux cleaned = 0.0033098 Jy ! Component: 3550 - total flux cleaned = 0.00333728 Jy ! Component: 3600 - total flux cleaned = 0.00344661 Jy ! Component: 3650 - total flux cleaned = 0.00341949 Jy ! Component: 3700 - total flux cleaned = 0.00339234 Jy ! Component: 3750 - total flux cleaned = 0.00341899 Jy ! Component: 3800 - total flux cleaned = 0.00341892 Jy ! Component: 3850 - total flux cleaned = 0.00344561 Jy ! Component: 3900 - total flux cleaned = 0.00344571 Jy ! Component: 3950 - total flux cleaned = 0.00341905 Jy ! Component: 4000 - total flux cleaned = 0.0033399 Jy ! Component: 4050 - total flux cleaned = 0.0033927 Jy ! Total flux subtracted in 4096 components = 0.00331386 Jy ! Clean residual min=-0.001984 max=0.001473 Jy/beam ! Clean residual mean=0.000005 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.230653 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 298 components and 0.230653 Jy ![Exited script file: muppet] wmap "J1310+3233_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.685 x 8.721 at 28.81 degrees (North through East) ! Clean map min=-0.0042955 max=0.21136 Jy/beam ! Writing clean map to FITS file: J1310+3233_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.211363 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000452753 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.64262 0.64262 1.28524 2.57048 5.14096 10.2819 20.5639 41.1277 82.2554 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.211 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.685 x 8.721 at 28.81 degrees (North through East) ! Clean map min=-0.0042955 max=0.21136 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1310+3233_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:19:03 2019