! Started logfile: J1309-0415_S_2017_10_09_pus_uvs.log on Sun May 12 13:13:29 2019 obs J1309-0415_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1309-0415_S_2017_10_09_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.567901 visibilities/baseline/integration-bin. ! Found source: J1309-0415 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1309-0415_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 411 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 526 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 486 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 949 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986723Jy sigma=0.006102 ! Fit after self-cal, rms=0.918465Jy sigma=0.005673 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.728 mas, bmaj=17.3 mas, bpa=-17.63 degrees ! Estimated noise=1954.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0676208 Jy ! Component: 100 - total flux cleaned = 0.0826588 Jy ! Total flux subtracted in 100 components = 0.0826588 Jy ! Clean residual min=-0.006009 max=0.005843 Jy/beam ! Clean residual mean=0.000021 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.0826588 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0826588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107296Jy sigma=0.000607 ! Fit after self-cal, rms=0.106723Jy sigma=0.000604 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=17.84 mas, bpa=-17.34 degrees ! Estimated noise=1411.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00805265 Jy ! Component: 100 - total flux cleaned = 0.012642 Jy ! Component: 150 - total flux cleaned = 0.0153909 Jy ! Component: 200 - total flux cleaned = 0.0165099 Jy ! Total flux subtracted in 200 components = 0.0165099 Jy ! Clean residual min=-0.004220 max=0.003719 Jy/beam ! Clean residual mean=0.000018 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.0991687 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 41 components and 0.0991687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105980Jy sigma=0.000601 ! Fit after self-cal, rms=0.105925Jy sigma=0.000600 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.00 KP 1.09 ! LA 1.02 MK 1.13 NL 1.08 OV 1.00* ! PT 1.05 ! ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 1.04 KP 0.97 ! LA 1.02 MK 1.02 NL 0.87 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 1.04 KP 0.90 ! LA 0.82 MK 1.03 NL 1.13 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.91 KP 1.00* ! LA 1.00* MK 0.92 NL 1.00* OV 1.00* ! PT 1.05 ! ! ! Fit before self-cal, rms=0.105925Jy sigma=0.000600 ! Fit after self-cal, rms=0.104189Jy sigma=0.000599 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=17.88 mas, bpa=-17.31 degrees ! Estimated noise=1423.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00077255 Jy ! Component: 100 - total flux cleaned = -0.000945566 Jy ! Component: 150 - total flux cleaned = -0.00115102 Jy ! Component: 200 - total flux cleaned = -0.00128764 Jy ! Total flux subtracted in 200 components = -0.00128764 Jy ! Clean residual min=-0.003395 max=0.003603 Jy/beam ! Clean residual mean=0.000004 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.097881 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.097881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104128Jy sigma=0.000599 ! Fit after self-cal, rms=0.104058Jy sigma=0.000598 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104058Jy sigma=0.000598 ! Fit after self-cal, rms=0.103460Jy sigma=0.000597 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=18.12 mas, bpa=-17.41 degrees ! Estimated noise=1417.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000587797 Jy ! Component: 100 - total flux cleaned = -0.000552029 Jy ! Component: 150 - total flux cleaned = -0.000454275 Jy ! Component: 200 - total flux cleaned = -0.000396503 Jy ! Total flux subtracted in 200 components = -0.000396503 Jy ! Clean residual min=-0.002886 max=0.003558 Jy/beam ! Clean residual mean=0.000006 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0974845 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.0974845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103435Jy sigma=0.000597 ! Fit after self-cal, rms=0.103502Jy sigma=0.000596 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -107). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252626 Jy ! Component: 100 - total flux cleaned = 0.00291151 Jy ! Component: 150 - total flux cleaned = 0.00310507 Jy ! Component: 200 - total flux cleaned = 0.0033681 Jy ! Total flux subtracted in 200 components = 0.0033681 Jy ! Clean residual min=-0.002629 max=0.002311 Jy/beam ! Clean residual mean=0.000008 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.100853 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.100853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103360Jy sigma=0.000596 ! Fit after self-cal, rms=0.103331Jy sigma=0.000595 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103331Jy sigma=0.000595 ! Fit after self-cal, rms=0.103278Jy sigma=0.000595 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.518 mas, bmaj=18.15 mas, bpa=-17.43 degrees ! Estimated noise=1409.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117329 Jy ! Component: 100 - total flux cleaned = 0.00159957 Jy ! Component: 150 - total flux cleaned = 0.00175397 Jy ! Component: 200 - total flux cleaned = 0.00206874 Jy ! Total flux subtracted in 200 components = 0.00206874 Jy ! Clean residual min=-0.002569 max=0.002121 Jy/beam ! Clean residual mean=0.000006 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.102921 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.102921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103198Jy sigma=0.000595 ! Fit after self-cal, rms=0.103205Jy sigma=0.000595 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000474504 Jy ! Component: 100 - total flux cleaned = 0.000842876 Jy ! Component: 150 - total flux cleaned = 0.000968271 Jy ! Component: 200 - total flux cleaned = 0.00115717 Jy ! Total flux subtracted in 200 components = 0.00115717 Jy ! Clean residual min=-0.002523 max=0.002150 Jy/beam ! Clean residual mean=0.000006 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.104079 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 116 components and 0.104079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103161Jy sigma=0.000595 ! Fit after self-cal, rms=0.103162Jy sigma=0.000595 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103162Jy sigma=0.000595 ! Fit after self-cal, rms=0.102934Jy sigma=0.000595 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.219 mas, bmaj=18.69 mas, bpa=-16.69 degrees ! Estimated noise=1639.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124913 Jy ! Component: 100 - total flux cleaned = 0.000358398 Jy ! Component: 150 - total flux cleaned = 0.000480499 Jy ! Component: 200 - total flux cleaned = 0.000650375 Jy ! Total flux subtracted in 200 components = 0.000650375 Jy ! Clean residual min=-0.001895 max=0.001975 Jy/beam ! Clean residual mean=0.000007 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.104729 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 133 components and 0.104729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102918Jy sigma=0.000594 ! Fit after self-cal, rms=0.102933Jy sigma=0.000594 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125237 Jy ! Component: 100 - total flux cleaned = 0.000263515 Jy ! Component: 150 - total flux cleaned = 0.000417582 Jy ! Component: 200 - total flux cleaned = 0.00051229 Jy ! Total flux subtracted in 200 components = 0.00051229 Jy ! Clean residual min=-0.001971 max=0.001935 Jy/beam ! Clean residual mean=0.000006 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.105241 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 144 components and 0.105241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102922Jy sigma=0.000594 ! Fit after self-cal, rms=0.102921Jy sigma=0.000594 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=18.15 mas, bpa=-17.42 degrees ! Estimated noise=1402.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 18.15 at -17.42 degrees (North through East) ! Clean map min=-0.002777 max=0.085982 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.736 mas, bmaj=17.5 mas, bpa=-17.75 degrees ! Estimated noise=1905.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0654003 Jy ! Component: 100 - total flux cleaned = 0.0804943 Jy ! Component: 150 - total flux cleaned = 0.086552 Jy ! Component: 200 - total flux cleaned = 0.0899451 Jy ! Total flux subtracted in 200 components = 0.0899451 Jy ! Clean residual min=-0.004900 max=0.004815 Jy/beam ! Clean residual mean=0.000010 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.0899452 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0899452 Jy ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=18.15 mas, bpa=-17.42 degrees ! Estimated noise=1402.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458447 Jy ! Component: 100 - total flux cleaned = 0.00742029 Jy ! Component: 150 - total flux cleaned = 0.00970358 Jy ! Component: 200 - total flux cleaned = 0.0109999 Jy ! Total flux subtracted in 200 components = 0.0109999 Jy ! Clean residual min=-0.003349 max=0.003183 Jy/beam ! Clean residual mean=0.000013 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.100945 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 44 components and 0.100945 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.219 mas, bmaj=18.69 mas, bpa=-16.69 degrees ! Estimated noise=1639.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187885 Jy ! Component: 100 - total flux cleaned = 0.0025108 Jy ! Component: 150 - total flux cleaned = 0.00275637 Jy ! Component: 200 - total flux cleaned = 0.00297839 Jy ! Total flux subtracted in 200 components = 0.00297839 Jy ! Clean residual min=-0.002432 max=0.002113 Jy/beam ! Clean residual mean=0.000011 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.103923 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205795 Jy ! Component: 100 - total flux cleaned = 0.000430425 Jy ! Component: 150 - total flux cleaned = 0.000536347 Jy ! Component: 200 - total flux cleaned = 0.000668129 Jy ! Total flux subtracted in 200 components = 0.000668129 Jy ! Clean residual min=-0.002397 max=0.001976 Jy/beam ! Clean residual mean=0.000010 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.104592 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 72 components and 0.104592 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=18.15 mas, bpa=-17.42 degrees ! Estimated noise=1402.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156216 Jy ! Component: 100 - total flux cleaned = 0.00069952 Jy ! Component: 150 - total flux cleaned = 0.000936454 Jy ! Component: 200 - total flux cleaned = 0.00109286 Jy ! Total flux subtracted in 200 components = 0.00109286 Jy ! Clean residual min=-0.002612 max=0.002356 Jy/beam ! Clean residual mean=0.000006 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.105684 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 89 components and 0.105684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102963Jy sigma=0.000595 ! Fit after self-cal, rms=0.102927Jy sigma=0.000595 wmodel J1309-0415_S_2017_10_09_pus_map.mod ! Writing 89 model components to file: J1309-0415_S_2017_10_09_pus_map.mod wobs J1309-0415_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1309-0415_S_2017_10_09_pus_uvs.fits wwins J1309-0415_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1309-0415_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000465564 Jy ! Component: 100 - total flux cleaned = -0.000697211 Jy ! Component: 150 - total flux cleaned = -0.000881245 Jy ! Component: 200 - total flux cleaned = -0.00102019 Jy ! Component: 250 - total flux cleaned = -0.00108619 Jy ! Component: 300 - total flux cleaned = -0.00118087 Jy ! Component: 350 - total flux cleaned = -0.00121074 Jy ! Component: 400 - total flux cleaned = -0.00129816 Jy ! Component: 450 - total flux cleaned = -0.0012698 Jy ! Component: 500 - total flux cleaned = -0.00129713 Jy ! Component: 550 - total flux cleaned = -0.00127055 Jy ! Component: 600 - total flux cleaned = -0.0012713 Jy ! Component: 650 - total flux cleaned = -0.0012712 Jy ! Component: 700 - total flux cleaned = -0.00127095 Jy ! Component: 750 - total flux cleaned = -0.00124697 Jy ! Component: 800 - total flux cleaned = -0.00117661 Jy ! Component: 850 - total flux cleaned = -0.00115375 Jy ! Component: 900 - total flux cleaned = -0.00113125 Jy ! Component: 950 - total flux cleaned = -0.00117647 Jy ! Component: 1000 - total flux cleaned = -0.0012206 Jy ! Component: 1050 - total flux cleaned = -0.00132723 Jy ! Component: 1100 - total flux cleaned = -0.00122138 Jy ! Component: 1150 - total flux cleaned = -0.0011388 Jy ! Component: 1200 - total flux cleaned = -0.00111896 Jy ! Component: 1250 - total flux cleaned = -0.00111899 Jy ! Component: 1300 - total flux cleaned = -0.0011382 Jy ! Component: 1350 - total flux cleaned = -0.00108028 Jy ! Component: 1400 - total flux cleaned = -0.00108074 Jy ! Component: 1450 - total flux cleaned = -0.00106206 Jy ! Component: 1500 - total flux cleaned = -0.00108078 Jy ! Component: 1550 - total flux cleaned = -0.00106244 Jy ! Component: 1600 - total flux cleaned = -0.00111636 Jy ! Component: 1650 - total flux cleaned = -0.0011161 Jy ! Component: 1700 - total flux cleaned = -0.0011513 Jy ! Component: 1750 - total flux cleaned = -0.001134 Jy ! Component: 1800 - total flux cleaned = -0.00120227 Jy ! Component: 1850 - total flux cleaned = -0.00115226 Jy ! Component: 1900 - total flux cleaned = -0.00118517 Jy ! Component: 1950 - total flux cleaned = -0.00116886 Jy ! Component: 2000 - total flux cleaned = -0.00113677 Jy ! Component: 2050 - total flux cleaned = -0.00115283 Jy ! Component: 2100 - total flux cleaned = -0.00121578 Jy ! Component: 2150 - total flux cleaned = -0.00118452 Jy ! Component: 2200 - total flux cleaned = -0.00120009 Jy ! Component: 2250 - total flux cleaned = -0.00121516 Jy ! Component: 2300 - total flux cleaned = -0.00122983 Jy ! Component: 2350 - total flux cleaned = -0.00120036 Jy ! Component: 2400 - total flux cleaned = -0.00124399 Jy ! Component: 2450 - total flux cleaned = -0.00125845 Jy ! Component: 2500 - total flux cleaned = -0.0012726 Jy ! Component: 2550 - total flux cleaned = -0.00127237 Jy ! Component: 2600 - total flux cleaned = -0.0012864 Jy ! Component: 2650 - total flux cleaned = -0.00128644 Jy ! Component: 2700 - total flux cleaned = -0.00134124 Jy ! Component: 2750 - total flux cleaned = -0.00136833 Jy ! Component: 2800 - total flux cleaned = -0.00136827 Jy ! Component: 2850 - total flux cleaned = -0.00143459 Jy ! Component: 2900 - total flux cleaned = -0.00146091 Jy ! Component: 2950 - total flux cleaned = -0.00147395 Jy ! Component: 3000 - total flux cleaned = -0.00153847 Jy ! Component: 3050 - total flux cleaned = -0.00158952 Jy ! Component: 3100 - total flux cleaned = -0.00162737 Jy ! Component: 3150 - total flux cleaned = -0.00168986 Jy ! Component: 3200 - total flux cleaned = -0.00173941 Jy ! Component: 3250 - total flux cleaned = -0.00177623 Jy ! Component: 3300 - total flux cleaned = -0.00180074 Jy ! Component: 3350 - total flux cleaned = -0.0018611 Jy ! Component: 3400 - total flux cleaned = -0.00192103 Jy ! Component: 3450 - total flux cleaned = -0.00195658 Jy ! Component: 3500 - total flux cleaned = -0.00199192 Jy ! Component: 3550 - total flux cleaned = -0.00198023 Jy ! Component: 3600 - total flux cleaned = -0.00204993 Jy ! Component: 3650 - total flux cleaned = -0.00208454 Jy ! Component: 3700 - total flux cleaned = -0.00210751 Jy ! Component: 3750 - total flux cleaned = -0.0021415 Jy ! Component: 3800 - total flux cleaned = -0.00215288 Jy ! Component: 3850 - total flux cleaned = -0.00222 Jy ! Component: 3900 - total flux cleaned = -0.0022422 Jy ! Component: 3950 - total flux cleaned = -0.00228624 Jy ! Component: 4000 - total flux cleaned = -0.00231905 Jy ! Component: 4050 - total flux cleaned = -0.0023081 Jy ! Total flux subtracted in 4096 components = -0.00237297 Jy ! Clean residual min=-0.000643 max=0.000598 Jy/beam ! Clean residual mean=0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.103311 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 370 components and 0.103311 Jy ![Exited script file: muppet] wmap "J1309-0415_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 18.15 at -17.42 degrees (North through East) ! Clean map min=-0.0023856 max=0.085162 Jy/beam ! Writing clean map to FITS file: J1309-0415_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0851616 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00019957 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.703029 0.703029 1.40606 2.81212 5.62424 11.2485 22.4969 44.9939 89.9878 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.516 x 18.15 at -17.42 degrees (North through East) ! Clean map min=-0.0023856 max=0.085162 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1309-0415_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:13:35 2019