! Started logfile: J1308-2458_S_2017_05_27_pus_uvs.log on Fri May 3 11:07:33 2019 obs J1308-2458_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1308-2458_S_2017_05_27_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.899306 visibilities/baseline/integration-bin. ! Found source: J1308-2458 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 15540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1308-2458_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 542 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.930556Jy sigma=0.005832 ! Fit after self-cal, rms=0.907928Jy sigma=0.005715 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=6.838 mas, bpa=-5.858 degrees ! Estimated noise=2093.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0746174 Jy ! Component: 100 - total flux cleaned = 0.0909199 Jy ! Total flux subtracted in 100 components = 0.0909199 Jy ! Clean residual min=-0.005814 max=0.006554 Jy/beam ! Clean residual mean=-0.000016 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 0.0909199 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0909199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127802Jy sigma=0.000663 ! Fit after self-cal, rms=0.127787Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=7.94 mas, bpa=-5.277 degrees ! Estimated noise=1073.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0068554 Jy ! Component: 100 - total flux cleaned = 0.00942982 Jy ! Component: 150 - total flux cleaned = 0.0107072 Jy ! Component: 200 - total flux cleaned = 0.0114095 Jy ! Total flux subtracted in 200 components = 0.0114095 Jy ! Clean residual min=-0.003535 max=0.003418 Jy/beam ! Clean residual mean=-0.000010 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.102329 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 29 components and 0.102329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127301Jy sigma=0.000661 ! Fit after self-cal, rms=0.127330Jy sigma=0.000661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 1.04 KP 1.01 ! LA 1.00 MK 0.94 NL 0.94 OV 1.03 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.10 KP 1.02 ! LA 0.93 MK 1.01 NL 1.05 OV 1.07 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 0.99 KP 0.99 ! LA 0.99 MK 1.11 NL 1.01 OV 0.95 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 1.14 KP 1.00* ! LA 0.62 MK 0.86 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.127330Jy sigma=0.000661 ! Fit after self-cal, rms=0.122299Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=7.932 mas, bpa=-5.237 degrees ! Estimated noise=1078.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549518 Jy ! Component: 100 - total flux cleaned = 0.000588217 Jy ! Component: 150 - total flux cleaned = 0.000604053 Jy ! Component: 200 - total flux cleaned = 0.00061674 Jy ! Total flux subtracted in 200 components = 0.00061674 Jy ! Clean residual min=-0.003072 max=0.003230 Jy/beam ! Clean residual mean=-0.000005 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.102946 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.102946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122291Jy sigma=0.000659 ! Fit after self-cal, rms=0.122200Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122200Jy sigma=0.000659 ! Fit after self-cal, rms=0.121783Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=7.957 mas, bpa=-5.186 degrees ! Estimated noise=1080.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412256 Jy ! Component: 100 - total flux cleaned = 0.000437383 Jy ! Component: 150 - total flux cleaned = 0.000460341 Jy ! Component: 200 - total flux cleaned = 0.000471399 Jy ! Total flux subtracted in 200 components = 0.000471399 Jy ! Clean residual min=-0.002858 max=0.002659 Jy/beam ! Clean residual mean=0.000004 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.103418 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.103418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121778Jy sigma=0.000657 ! Fit after self-cal, rms=0.121815Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.06721e-05 Jy ! Component: 100 - total flux cleaned = -2.07101e-05 Jy ! Component: 150 - total flux cleaned = -1.82556e-06 Jy ! Component: 200 - total flux cleaned = 7.7131e-06 Jy ! Total flux subtracted in 200 components = 7.7131e-06 Jy ! Clean residual min=-0.002917 max=0.002729 Jy/beam ! Clean residual mean=0.000003 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.103425 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.103425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121813Jy sigma=0.000657 ! Fit after self-cal, rms=0.121813Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121813Jy sigma=0.000657 ! Fit after self-cal, rms=0.122707Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=7.962 mas, bpa=-5.124 degrees ! Estimated noise=1084.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000370904 Jy ! Component: 100 - total flux cleaned = 0.000393581 Jy ! Component: 150 - total flux cleaned = 0.000404191 Jy ! Component: 200 - total flux cleaned = 0.0004142 Jy ! Total flux subtracted in 200 components = 0.0004142 Jy ! Clean residual min=-0.002878 max=0.002653 Jy/beam ! Clean residual mean=0.000005 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.103839 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.103839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122703Jy sigma=0.000657 ! Fit after self-cal, rms=0.122722Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.35207e-06 Jy ! Component: 100 - total flux cleaned = 1.565e-05 Jy ! Component: 150 - total flux cleaned = 2.43174e-05 Jy ! Component: 200 - total flux cleaned = 3.28764e-05 Jy ! Total flux subtracted in 200 components = 3.28764e-05 Jy ! Clean residual min=-0.002895 max=0.002671 Jy/beam ! Clean residual mean=0.000005 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.103872 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.103872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122720Jy sigma=0.000657 ! Fit after self-cal, rms=0.122720Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122720Jy sigma=0.000657 ! Fit after self-cal, rms=0.123227Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.112 mas, bmaj=18.92 mas, bpa=-3.394 degrees ! Estimated noise=1365.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237439 Jy ! Component: 100 - total flux cleaned = 0.000223786 Jy ! Component: 150 - total flux cleaned = 0.000212048 Jy ! Component: 200 - total flux cleaned = 0.000201619 Jy ! Total flux subtracted in 200 components = 0.000201619 Jy ! Clean residual min=-0.002577 max=0.002742 Jy/beam ! Clean residual mean=0.000010 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.104074 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 54 components and 0.104074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123227Jy sigma=0.000657 ! Fit after self-cal, rms=0.123231Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.29759e-05 Jy ! Component: 100 - total flux cleaned = -2.37259e-05 Jy ! Component: 150 - total flux cleaned = -3.32614e-05 Jy ! Component: 200 - total flux cleaned = -3.3176e-05 Jy ! Total flux subtracted in 200 components = -3.3176e-05 Jy ! Clean residual min=-0.002584 max=0.002738 Jy/beam ! Clean residual mean=0.000010 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.104041 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 0.104041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123231Jy sigma=0.000657 ! Fit after self-cal, rms=0.123228Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.14 mas, bmaj=7.966 mas, bpa=-5.075 degrees ! Estimated noise=1087.16 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.14 x 7.966 at -5.075 degrees (North through East) ! Clean map min=-0.0027446 max=0.098323 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.519 mas, bmaj=6.862 mas, bpa=-6.088 degrees ! Estimated noise=2164.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0770316 Jy ! Component: 100 - total flux cleaned = 0.0939978 Jy ! Component: 150 - total flux cleaned = 0.0993139 Jy ! Component: 200 - total flux cleaned = 0.101977 Jy ! Total flux subtracted in 200 components = 0.101977 Jy ! Clean residual min=-0.005154 max=0.005303 Jy/beam ! Clean residual mean=-0.000007 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.101977 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.101977 Jy ! Inverting map and beam ! Estimated beam: bmin=3.14 mas, bmaj=7.966 mas, bpa=-5.075 degrees ! Estimated noise=1087.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133681 Jy ! Component: 100 - total flux cleaned = 0.00151391 Jy ! Component: 150 - total flux cleaned = 0.00165378 Jy ! Component: 200 - total flux cleaned = 0.00170174 Jy ! Total flux subtracted in 200 components = 0.00170174 Jy ! Clean residual min=-0.002791 max=0.002782 Jy/beam ! Clean residual mean=0.000004 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.103679 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.103679 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.112 mas, bmaj=18.92 mas, bpa=-3.394 degrees ! Estimated noise=1365.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145444 Jy ! Component: 100 - total flux cleaned = 0.000146305 Jy ! Component: 150 - total flux cleaned = 0.00013183 Jy ! Component: 200 - total flux cleaned = 0.000130268 Jy ! Total flux subtracted in 200 components = 0.000130268 Jy ! Clean residual min=-0.002477 max=0.002772 Jy/beam ! Clean residual mean=0.000009 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.103809 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.67369e-06 Jy ! Component: 100 - total flux cleaned = -1.21174e-06 Jy ! Component: 150 - total flux cleaned = -2.54898e-06 Jy ! Component: 200 - total flux cleaned = -1.09909e-05 Jy ! Total flux subtracted in 200 components = -1.09909e-05 Jy ! Clean residual min=-0.002523 max=0.002761 Jy/beam ! Clean residual mean=0.000009 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.103798 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.103798 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.14 mas, bmaj=7.966 mas, bpa=-5.075 degrees ! Estimated noise=1087.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.42735e-05 Jy ! Component: 100 - total flux cleaned = 1.61342e-05 Jy ! Component: 150 - total flux cleaned = 5.55606e-05 Jy ! Component: 200 - total flux cleaned = 9.08591e-05 Jy ! Total flux subtracted in 200 components = 9.08591e-05 Jy ! Clean residual min=-0.002842 max=0.002661 Jy/beam ! Clean residual mean=0.000004 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.103889 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.103889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123243Jy sigma=0.000657 ! Fit after self-cal, rms=0.123242Jy sigma=0.000657 wmodel J1308-2458_S_2017_05_27_pus_map.mod ! Writing 47 model components to file: J1308-2458_S_2017_05_27_pus_map.mod wobs J1308-2458_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1308-2458_S_2017_05_27_pus_uvs.fits wwins J1308-2458_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J1308-2458_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000457345 Jy ! Component: 100 - total flux cleaned = -0.000777462 Jy ! Component: 150 - total flux cleaned = -0.000905514 Jy ! Component: 200 - total flux cleaned = -0.00102846 Jy ! Component: 250 - total flux cleaned = -0.00122469 Jy ! Component: 300 - total flux cleaned = -0.00126169 Jy ! Component: 350 - total flux cleaned = -0.00111583 Jy ! Component: 400 - total flux cleaned = -0.00108099 Jy ! Component: 450 - total flux cleaned = -0.000942609 Jy ! Component: 500 - total flux cleaned = -0.000774219 Jy ! Component: 550 - total flux cleaned = -0.000641834 Jy ! Component: 600 - total flux cleaned = -0.000478968 Jy ! Component: 650 - total flux cleaned = -0.000351628 Jy ! Component: 700 - total flux cleaned = -0.000257838 Jy ! Component: 750 - total flux cleaned = -0.000135527 Jy ! Component: 800 - total flux cleaned = -0.000105541 Jy ! Component: 850 - total flux cleaned = -0.000105096 Jy ! Component: 900 - total flux cleaned = 4.02744e-05 Jy ! Component: 950 - total flux cleaned = 9.72294e-05 Jy ! Component: 1000 - total flux cleaned = 9.73552e-05 Jy ! Component: 1050 - total flux cleaned = 0.000125198 Jy ! Component: 1100 - total flux cleaned = 0.000125212 Jy ! Component: 1150 - total flux cleaned = 0.000151801 Jy ! Component: 1200 - total flux cleaned = 0.000178292 Jy ! Component: 1250 - total flux cleaned = 0.000151836 Jy ! Component: 1300 - total flux cleaned = 7.57149e-05 Jy ! Component: 1350 - total flux cleaned = 7.51253e-05 Jy ! Component: 1400 - total flux cleaned = 4.67167e-07 Jy ! Component: 1450 - total flux cleaned = -2.39046e-05 Jy ! Component: 1500 - total flux cleaned = -9.64221e-05 Jy ! Component: 1550 - total flux cleaned = -2.50703e-05 Jy ! Component: 1600 - total flux cleaned = -4.89101e-05 Jy ! Component: 1650 - total flux cleaned = -7.20514e-05 Jy ! Component: 1700 - total flux cleaned = -4.92314e-05 Jy ! Component: 1750 - total flux cleaned = -9.47506e-05 Jy ! Component: 1800 - total flux cleaned = -0.00018447 Jy ! Component: 1850 - total flux cleaned = -0.000228556 Jy ! Component: 1900 - total flux cleaned = -0.000294238 Jy ! Component: 1950 - total flux cleaned = -0.000250747 Jy ! Component: 2000 - total flux cleaned = -0.000315552 Jy ! Component: 2050 - total flux cleaned = -0.000357752 Jy ! Component: 2100 - total flux cleaned = -0.00042049 Jy ! Component: 2150 - total flux cleaned = -0.000357792 Jy ! Component: 2200 - total flux cleaned = -0.000357852 Jy ! Component: 2250 - total flux cleaned = -0.000337732 Jy ! Component: 2300 - total flux cleaned = -0.000378487 Jy ! Component: 2350 - total flux cleaned = -0.000398612 Jy ! Component: 2400 - total flux cleaned = -0.000398582 Jy ! Component: 2450 - total flux cleaned = -0.00043824 Jy ! Component: 2500 - total flux cleaned = -0.000438024 Jy ! Component: 2550 - total flux cleaned = -0.000379749 Jy ! Component: 2600 - total flux cleaned = -0.000264688 Jy ! Component: 2650 - total flux cleaned = -0.000264741 Jy ! Component: 2700 - total flux cleaned = -0.000283445 Jy ! Component: 2750 - total flux cleaned = -0.00024581 Jy ! Component: 2800 - total flux cleaned = -0.000153082 Jy ! Component: 2850 - total flux cleaned = -0.000171542 Jy ! Component: 2900 - total flux cleaned = -0.000189788 Jy ! Component: 2950 - total flux cleaned = -0.000135311 Jy ! Component: 3000 - total flux cleaned = -0.00011762 Jy ! Component: 3050 - total flux cleaned = -0.00011763 Jy ! Component: 3100 - total flux cleaned = -9.98453e-05 Jy ! Component: 3150 - total flux cleaned = -2.973e-05 Jy ! Component: 3200 - total flux cleaned = -2.97103e-05 Jy ! Component: 3250 - total flux cleaned = 5.65484e-05 Jy ! Component: 3300 - total flux cleaned = 3.92832e-05 Jy ! Component: 3350 - total flux cleaned = 0.000124321 Jy ! Component: 3400 - total flux cleaned = 0.000124312 Jy ! Component: 3450 - total flux cleaned = 0.000174794 Jy ! Component: 3500 - total flux cleaned = 0.000208302 Jy ! Component: 3550 - total flux cleaned = 0.00029081 Jy ! Component: 3600 - total flux cleaned = 0.000258045 Jy ! Component: 3650 - total flux cleaned = 0.000306843 Jy ! Component: 3700 - total flux cleaned = 0.000306939 Jy ! Component: 3750 - total flux cleaned = 0.000339069 Jy ! Component: 3800 - total flux cleaned = 0.00037091 Jy ! Component: 3850 - total flux cleaned = 0.00038666 Jy ! Component: 3900 - total flux cleaned = 0.000402524 Jy ! Component: 3950 - total flux cleaned = 0.000433905 Jy ! Component: 4000 - total flux cleaned = 0.000402934 Jy ! Component: 4050 - total flux cleaned = 0.000449222 Jy ! Total flux subtracted in 4096 components = 0.000387731 Jy ! Clean residual min=-0.000942 max=0.000985 Jy/beam ! Clean residual mean=0.000003 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.104277 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 327 components and 0.104277 Jy ![Exited script file: muppet] wmap "J1308-2458_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.14 x 7.966 at -5.075 degrees (North through East) ! Clean map min=-0.001575 max=0.098487 Jy/beam ! Writing clean map to FITS file: J1308-2458_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0984875 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000276946 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.843596 0.843596 1.68719 3.37438 6.74877 13.4975 26.9951 53.9902 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.14 x 7.966 at -5.075 degrees (North through East) ! Clean map min=-0.001575 max=0.098487 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1308-2458_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:07:38 2019