! Started logfile: J1308+6544_S_2017_07_16_pus_uvs.log on Thu May 9 11:09:17 2019 obs J1308+6544_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1308+6544_S_2017_07_16_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.790893 visibilities/baseline/integration-bin. ! Found source: J1308+6544 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 17368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1308+6544_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 935 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.979667Jy sigma=0.009494 ! Fit after self-cal, rms=0.944808Jy sigma=0.009161 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.236 mas, bmaj=10.06 mas, bpa=-23.24 degrees ! Estimated noise=1215.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0377986 Jy ! Component: 100 - total flux cleaned = 0.0555495 Jy ! Total flux subtracted in 100 components = 0.0555495 Jy ! Clean residual min=-0.007849 max=0.011368 Jy/beam ! Clean residual mean=0.000041 rms=0.002741 Jy/beam ! Combined flux in latest and established models = 0.0555495 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0555495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101099Jy sigma=0.000983 ! Fit after self-cal, rms=0.100241Jy sigma=0.000976 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.82 mas, bmaj=10.32 mas, bpa=-23.06 degrees ! Estimated noise=632.582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273666 Jy ! Component: 100 - total flux cleaned = 0.0454396 Jy ! Component: 150 - total flux cleaned = 0.0587835 Jy ! Component: 200 - total flux cleaned = 0.0696517 Jy ! Total flux subtracted in 200 components = 0.0696517 Jy ! Clean residual min=-0.011527 max=0.009697 Jy/beam ! Clean residual mean=0.000068 rms=0.003537 Jy/beam ! Combined flux in latest and established models = 0.125201 Jy ! Performing phase self-cal ! Adding 90 model components to the UV plane model. ! The established model now contains 94 components and 0.125201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091304Jy sigma=0.000876 ! Fit after self-cal, rms=0.090898Jy sigma=0.000873 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.00* HN 1.00 KP 0.71 ! LA 1.11 MK 1.31 NL 1.48 OV 1.02 ! PT 0.52 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 1.00* HN 1.17 KP 0.60 ! LA 2.36 MK 1.06 NL 1.29 OV 0.81 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 1.05 KP 1.70 ! LA 1.05 MK 1.16 NL 1.20 OV 0.69 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 1.00* ! LA 0.50 MK 0.95 NL 1.00* OV 1.00* ! PT 0.55 SC 1.00* ! ! ! Fit before self-cal, rms=0.090898Jy sigma=0.000873 ! Fit after self-cal, rms=0.103531Jy sigma=0.000765 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=10.37 mas, bpa=-23.46 degrees ! Estimated noise=619.836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143026 Jy ! Component: 100 - total flux cleaned = 0.00128848 Jy ! Component: 150 - total flux cleaned = 0.00146045 Jy ! Component: 200 - total flux cleaned = 0.00153386 Jy ! Total flux subtracted in 200 components = 0.00153386 Jy ! Clean residual min=-0.006339 max=0.006470 Jy/beam ! Clean residual mean=-0.000002 rms=0.001951 Jy/beam ! Combined flux in latest and established models = 0.126735 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 105 components and 0.126735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103443Jy sigma=0.000764 ! Fit after self-cal, rms=0.105599Jy sigma=0.000756 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105599Jy sigma=0.000756 ! Fit after self-cal, rms=0.115918Jy sigma=0.000755 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=10.33 mas, bpa=-23.6 degrees ! Estimated noise=616.343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222118 Jy ! Component: 100 - total flux cleaned = 0.000416474 Jy ! Component: 150 - total flux cleaned = 0.000559042 Jy ! Component: 200 - total flux cleaned = 0.000504042 Jy ! Total flux subtracted in 200 components = 0.000504042 Jy ! Clean residual min=-0.006331 max=0.005589 Jy/beam ! Clean residual mean=-0.000003 rms=0.001799 Jy/beam ! Combined flux in latest and established models = 0.127239 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 115 components and 0.127239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115857Jy sigma=0.000754 ! Fit after self-cal, rms=0.116245Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157813 Jy ! Component: 100 - total flux cleaned = 6.89151e-05 Jy ! Component: 150 - total flux cleaned = -2.8901e-05 Jy ! Component: 200 - total flux cleaned = -0.000119262 Jy ! Total flux subtracted in 200 components = -0.000119262 Jy ! Clean residual min=-0.006226 max=0.005402 Jy/beam ! Clean residual mean=-0.000003 rms=0.001779 Jy/beam ! Combined flux in latest and established models = 0.12712 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 123 components and 0.12712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116221Jy sigma=0.000754 ! Fit after self-cal, rms=0.116241Jy sigma=0.000754 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116241Jy sigma=0.000754 ! Fit after self-cal, rms=0.119412Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=10.27 mas, bpa=-23.72 degrees ! Estimated noise=612.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.50255e-05 Jy ! Component: 100 - total flux cleaned = 5.93543e-05 Jy ! Component: 150 - total flux cleaned = 0.000126787 Jy ! Component: 200 - total flux cleaned = 5.04851e-05 Jy ! Total flux subtracted in 200 components = 5.04851e-05 Jy ! Clean residual min=-0.006229 max=0.005248 Jy/beam ! Clean residual mean=-0.000003 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 0.12717 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 129 components and 0.12717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119360Jy sigma=0.000754 ! Fit after self-cal, rms=0.119434Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270705 Jy ! Component: 100 - total flux cleaned = 0.000194162 Jy ! Component: 150 - total flux cleaned = 0.000104118 Jy ! Component: 200 - total flux cleaned = 4.29878e-05 Jy ! Total flux subtracted in 200 components = 4.29878e-05 Jy ! Clean residual min=-0.006123 max=0.005309 Jy/beam ! Clean residual mean=-0.000003 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 0.127213 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 134 components and 0.127213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119406Jy sigma=0.000753 ! Fit after self-cal, rms=0.119392Jy sigma=0.000753 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119392Jy sigma=0.000753 ! Fit after self-cal, rms=0.121842Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.835 mas, bmaj=11.37 mas, bpa=-29.33 degrees ! Estimated noise=796.422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.9279e-05 Jy ! Component: 100 - total flux cleaned = -2.49298e-05 Jy ! Component: 150 - total flux cleaned = -0.000132379 Jy ! Component: 200 - total flux cleaned = -0.000262013 Jy ! Total flux subtracted in 200 components = -0.000262013 Jy ! Clean residual min=-0.012229 max=0.011316 Jy/beam ! Clean residual mean=-0.000006 rms=0.003788 Jy/beam ! Combined flux in latest and established models = 0.126951 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 142 components and 0.126951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121787Jy sigma=0.000754 ! Fit after self-cal, rms=0.121755Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00032008 Jy ! Component: 100 - total flux cleaned = -0.000366292 Jy ! Component: 150 - total flux cleaned = -0.000398928 Jy ! Component: 200 - total flux cleaned = -0.000428256 Jy ! Total flux subtracted in 200 components = -0.000428256 Jy ! Clean residual min=-0.012236 max=0.011269 Jy/beam ! Clean residual mean=-0.000005 rms=0.003772 Jy/beam ! Combined flux in latest and established models = 0.126523 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 148 components and 0.126523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121712Jy sigma=0.000754 ! Fit after self-cal, rms=0.121686Jy sigma=0.000754 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=10.22 mas, bpa=-23.8 degrees ! Estimated noise=613.409 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.837 x 10.22 at -23.8 degrees (North through East) ! Clean map min=-0.0061692 max=0.058123 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.246 mas, bmaj=9.733 mas, bpa=-23.98 degrees ! Estimated noise=1177.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0381359 Jy ! Component: 100 - total flux cleaned = 0.0586845 Jy ! Component: 150 - total flux cleaned = 0.0730614 Jy ! Component: 200 - total flux cleaned = 0.0835589 Jy ! Total flux subtracted in 200 components = 0.0835589 Jy ! Clean residual min=-0.007533 max=0.007275 Jy/beam ! Clean residual mean=0.000017 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 0.0835589 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0835589 Jy ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=10.22 mas, bpa=-23.8 degrees ! Estimated noise=613.409 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140781 Jy ! Component: 100 - total flux cleaned = 0.0226361 Jy ! Component: 150 - total flux cleaned = 0.0283942 Jy ! Component: 200 - total flux cleaned = 0.0326188 Jy ! Total flux subtracted in 200 components = 0.0326188 Jy ! Clean residual min=-0.007888 max=0.005371 Jy/beam ! Clean residual mean=0.000011 rms=0.001952 Jy/beam ! Combined flux in latest and established models = 0.116178 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 77 components and 0.116178 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.835 mas, bmaj=11.37 mas, bpa=-29.33 degrees ! Estimated noise=796.422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00605032 Jy ! Component: 100 - total flux cleaned = 0.00895227 Jy ! Component: 150 - total flux cleaned = 0.010067 Jy ! Component: 200 - total flux cleaned = 0.0103383 Jy ! Total flux subtracted in 200 components = 0.0103383 Jy ! Clean residual min=-0.012473 max=0.011397 Jy/beam ! Clean residual mean=-0.000003 rms=0.003811 Jy/beam ! Combined flux in latest and established models = 0.126516 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220326 Jy ! Component: 100 - total flux cleaned = 0.000221786 Jy ! Component: 150 - total flux cleaned = 0.000252661 Jy ! Component: 200 - total flux cleaned = 0.000282838 Jy ! Total flux subtracted in 200 components = 0.000282838 Jy ! Clean residual min=-0.012363 max=0.011343 Jy/beam ! Clean residual mean=-0.000004 rms=0.003805 Jy/beam ! Combined flux in latest and established models = 0.126799 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 112 components and 0.126799 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=10.22 mas, bpa=-23.8 degrees ! Estimated noise=613.409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134706 Jy ! Component: 100 - total flux cleaned = 0.000393837 Jy ! Component: 150 - total flux cleaned = 0.000735894 Jy ! Component: 200 - total flux cleaned = 0.00106674 Jy ! Total flux subtracted in 200 components = 0.00106674 Jy ! Clean residual min=-0.006864 max=0.005469 Jy/beam ! Clean residual mean=-0.000003 rms=0.001793 Jy/beam ! Combined flux in latest and established models = 0.127866 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 134 components and 0.127866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121757Jy sigma=0.000754 ! Fit after self-cal, rms=0.121815Jy sigma=0.000754 wmodel J1308+6544_S_2017_07_16_pus_map.mod ! Writing 134 model components to file: J1308+6544_S_2017_07_16_pus_map.mod wobs J1308+6544_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1308+6544_S_2017_07_16_pus_uvs.fits wwins J1308+6544_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1308+6544_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226714 Jy ! Component: 100 - total flux cleaned = -0.00286131 Jy ! Component: 150 - total flux cleaned = -0.00259304 Jy ! Component: 200 - total flux cleaned = -0.00217077 Jy ! Component: 250 - total flux cleaned = -0.001609 Jy ! Component: 300 - total flux cleaned = -0.00107605 Jy ! Component: 350 - total flux cleaned = -0.000639454 Jy ! Component: 400 - total flux cleaned = -0.000223723 Jy ! Component: 450 - total flux cleaned = 0.000173607 Jy ! Component: 500 - total flux cleaned = 0.000621117 Jy ! Component: 550 - total flux cleaned = 0.00129675 Jy ! Component: 600 - total flux cleaned = 0.00183067 Jy ! Component: 650 - total flux cleaned = 0.00234735 Jy ! Component: 700 - total flux cleaned = 0.00290234 Jy ! Component: 750 - total flux cleaned = 0.00327828 Jy ! Component: 800 - total flux cleaned = 0.0036957 Jy ! Component: 850 - total flux cleaned = 0.00430292 Jy ! Component: 900 - total flux cleaned = 0.00469676 Jy ! Component: 950 - total flux cleaned = 0.00527082 Jy ! Component: 1000 - total flux cleaned = 0.00578325 Jy ! Component: 1050 - total flux cleaned = 0.00633177 Jy ! Component: 1100 - total flux cleaned = 0.00691281 Jy ! Component: 1150 - total flux cleaned = 0.00743668 Jy ! Component: 1200 - total flux cleaned = 0.00803535 Jy ! Component: 1250 - total flux cleaned = 0.00858029 Jy ! Component: 1300 - total flux cleaned = 0.00919718 Jy ! Component: 1350 - total flux cleaned = 0.00964157 Jy ! Component: 1400 - total flux cleaned = 0.0102764 Jy ! Component: 1450 - total flux cleaned = 0.0108224 Jy ! Component: 1500 - total flux cleaned = 0.0113211 Jy ! Component: 1550 - total flux cleaned = 0.0118116 Jy ! Component: 1600 - total flux cleaned = 0.0121832 Jy ! Component: 1650 - total flux cleaned = 0.0126226 Jy ! Component: 1700 - total flux cleaned = 0.0130192 Jy ! Component: 1750 - total flux cleaned = 0.0134811 Jy ! Component: 1800 - total flux cleaned = 0.0138315 Jy ! Component: 1850 - total flux cleaned = 0.0142463 Jy ! Component: 1900 - total flux cleaned = 0.0145533 Jy ! Component: 1950 - total flux cleaned = 0.014991 Jy ! Component: 2000 - total flux cleaned = 0.0153229 Jy ! Component: 2050 - total flux cleaned = 0.0155526 Jy ! Component: 2100 - total flux cleaned = 0.0156502 Jy ! Component: 2150 - total flux cleaned = 0.0157469 Jy ! Component: 2200 - total flux cleaned = 0.0158426 Jy ! Component: 2250 - total flux cleaned = 0.0158428 Jy ! Component: 2300 - total flux cleaned = 0.0159373 Jy ! Component: 2350 - total flux cleaned = 0.0159687 Jy ! Component: 2400 - total flux cleaned = 0.0159998 Jy ! Component: 2450 - total flux cleaned = 0.0160619 Jy ! Component: 2500 - total flux cleaned = 0.0160928 Jy ! Component: 2550 - total flux cleaned = 0.016154 Jy ! Component: 2600 - total flux cleaned = 0.0162148 Jy ! Component: 2650 - total flux cleaned = 0.016245 Jy ! Component: 2700 - total flux cleaned = 0.0163657 Jy ! Component: 2750 - total flux cleaned = 0.0164559 Jy ! Component: 2800 - total flux cleaned = 0.0166352 Jy ! Component: 2850 - total flux cleaned = 0.0166946 Jy ! Component: 2900 - total flux cleaned = 0.0168729 Jy ! Component: 2950 - total flux cleaned = 0.0169619 Jy ! Component: 3000 - total flux cleaned = 0.0171684 Jy ! Component: 3050 - total flux cleaned = 0.0171684 Jy ! Component: 3100 - total flux cleaned = 0.0172858 Jy ! Component: 3150 - total flux cleaned = 0.017315 Jy ! Component: 3200 - total flux cleaned = 0.017461 Jy ! Component: 3250 - total flux cleaned = 0.0175482 Jy ! Component: 3300 - total flux cleaned = 0.0176356 Jy ! Component: 3350 - total flux cleaned = 0.0176937 Jy ! Component: 3400 - total flux cleaned = 0.017752 Jy ! Component: 3450 - total flux cleaned = 0.0178101 Jy ! Component: 3500 - total flux cleaned = 0.0179262 Jy ! Component: 3550 - total flux cleaned = 0.0179552 Jy ! Component: 3600 - total flux cleaned = 0.0180131 Jy ! Component: 3650 - total flux cleaned = 0.0180711 Jy ! Component: 3700 - total flux cleaned = 0.018129 Jy ! Component: 3750 - total flux cleaned = 0.0181869 Jy ! Component: 3800 - total flux cleaned = 0.0182739 Jy ! Component: 3850 - total flux cleaned = 0.018332 Jy ! Component: 3900 - total flux cleaned = 0.0184192 Jy ! Component: 3950 - total flux cleaned = 0.0184192 Jy ! Component: 4000 - total flux cleaned = 0.0184775 Jy ! Component: 4050 - total flux cleaned = 0.018594 Jy ! Total flux subtracted in 4096 components = 0.0185939 Jy ! Clean residual min=-0.001813 max=0.001819 Jy/beam ! Clean residual mean=0.000005 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.14646 Jy keep ! Adding 397 model components to the UV plane model. ! The established model now contains 531 components and 0.146459 Jy ![Exited script file: muppet] wmap "J1308+6544_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.837 x 10.22 at -23.8 degrees (North through East) ! Clean map min=-0.0050526 max=0.058322 Jy/beam ! Writing clean map to FITS file: J1308+6544_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0583216 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000567876 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.92109 2.92109 5.84218 11.6844 23.3687 46.7375 93.4749 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.837 x 10.22 at -23.8 degrees (North through East) ! Clean map min=-0.0050526 max=0.058322 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1308+6544_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:09:23 2019