! Started logfile: J1307-3207_S_2017_10_21_pus_uvs.log on Sat May 11 20:58:35 2019 obs J1307-3207_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1307-3207_S_2017_10_21_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.865661 visibilities/baseline/integration-bin. ! Found source: J1307-3207 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 14460 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1307-3207_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 588 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.905502Jy sigma=0.006390 ! Fit after self-cal, rms=0.869523Jy sigma=0.006132 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=15.61 mas, bpa=-19.53 degrees ! Estimated noise=1435.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0988875 Jy ! Component: 100 - total flux cleaned = 0.129369 Jy ! Total flux subtracted in 100 components = 0.129369 Jy ! Clean residual min=-0.007804 max=0.013013 Jy/beam ! Clean residual mean=-0.000074 rms=0.002405 Jy/beam ! Combined flux in latest and established models = 0.129369 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.129369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119211Jy sigma=0.000753 ! Fit after self-cal, rms=0.119089Jy sigma=0.000752 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=17.76 mas, bpa=-19.06 degrees ! Estimated noise=1046.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217269 Jy ! Component: 100 - total flux cleaned = 0.0324801 Jy ! Component: 150 - total flux cleaned = 0.038712 Jy ! Component: 200 - total flux cleaned = 0.0425658 Jy ! Total flux subtracted in 200 components = 0.0425658 Jy ! Clean residual min=-0.005560 max=0.006738 Jy/beam ! Clean residual mean=-0.000090 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 0.171935 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 74 components and 0.171934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115343Jy sigma=0.000722 ! Fit after self-cal, rms=0.115335Jy sigma=0.000722 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 0.93 HN 1.05 KP 1.10 ! LA 1.01 MK 1.01 NL 0.96 OV 1.00 ! PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.03 KP 1.05 ! LA 0.99 MK 1.00 NL 1.08 OV 0.98 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.03 KP 1.04 ! LA 0.76 MK 1.06 NL 1.21 OV 0.92 ! PT 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 1.00* KP 1.00* ! LA 0.89 MK 0.94 NL 1.00* OV 1.00* ! PT 0.88 ! ! ! Fit before self-cal, rms=0.115335Jy sigma=0.000722 ! Fit after self-cal, rms=0.114902Jy sigma=0.000712 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=17.96 mas, bpa=-19.12 degrees ! Estimated noise=1046.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000892045 Jy ! Component: 100 - total flux cleaned = -0.000927145 Jy ! Component: 150 - total flux cleaned = -0.000925949 Jy ! Component: 200 - total flux cleaned = -0.00089558 Jy ! Total flux subtracted in 200 components = -0.00089558 Jy ! Clean residual min=-0.003157 max=0.003198 Jy/beam ! Clean residual mean=0.000036 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.171039 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.171039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114876Jy sigma=0.000712 ! Fit after self-cal, rms=0.115015Jy sigma=0.000711 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115015Jy sigma=0.000711 ! Fit after self-cal, rms=0.116312Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=18.01 mas, bpa=-19.15 degrees ! Estimated noise=1048.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.06335e-05 Jy ! Component: 100 - total flux cleaned = -8.21821e-05 Jy ! Component: 150 - total flux cleaned = -8.2842e-05 Jy ! Component: 200 - total flux cleaned = -8.45451e-05 Jy ! Total flux subtracted in 200 components = -8.45451e-05 Jy ! Clean residual min=-0.002497 max=0.002461 Jy/beam ! Clean residual mean=0.000016 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.170954 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 91 components and 0.170954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116297Jy sigma=0.000709 ! Fit after self-cal, rms=0.116403Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.76437e-06 Jy ! Component: 100 - total flux cleaned = 6.65952e-06 Jy ! Component: 150 - total flux cleaned = 2.79061e-05 Jy ! Component: 200 - total flux cleaned = 2.77933e-05 Jy ! Total flux subtracted in 200 components = 2.77933e-05 Jy ! Clean residual min=-0.002485 max=0.002396 Jy/beam ! Clean residual mean=0.000014 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.170982 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 0.170982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116393Jy sigma=0.000709 ! Fit after self-cal, rms=0.116394Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116394Jy sigma=0.000709 ! Fit after self-cal, rms=0.117560Jy sigma=0.000708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=18.03 mas, bpa=-19.19 degrees ! Estimated noise=1049.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186328 Jy ! Component: 100 - total flux cleaned = -0.000186492 Jy ! Component: 150 - total flux cleaned = -0.000186482 Jy ! Component: 200 - total flux cleaned = -0.000187455 Jy ! Total flux subtracted in 200 components = -0.000187455 Jy ! Clean residual min=-0.002506 max=0.002327 Jy/beam ! Clean residual mean=0.000010 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.170795 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 105 components and 0.170795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117550Jy sigma=0.000708 ! Fit after self-cal, rms=0.117615Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.28658e-05 Jy ! Component: 100 - total flux cleaned = -3.18919e-05 Jy ! Component: 150 - total flux cleaned = -3.22942e-05 Jy ! Component: 200 - total flux cleaned = -3.24149e-05 Jy ! Total flux subtracted in 200 components = -3.24149e-05 Jy ! Clean residual min=-0.002496 max=0.002281 Jy/beam ! Clean residual mean=0.000008 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.170762 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 107 components and 0.170762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117608Jy sigma=0.000708 ! Fit after self-cal, rms=0.117608Jy sigma=0.000708 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117608Jy sigma=0.000708 ! Fit after self-cal, rms=0.118265Jy sigma=0.000708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.179 mas, bmaj=31.47 mas, bpa=-5.4 degrees ! Estimated noise=1235.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.57909e-05 Jy ! Component: 100 - total flux cleaned = 6.43238e-05 Jy ! Component: 150 - total flux cleaned = 2.91821e-05 Jy ! Component: 200 - total flux cleaned = 1.39161e-05 Jy ! Total flux subtracted in 200 components = 1.39161e-05 Jy ! Clean residual min=-0.002604 max=0.002445 Jy/beam ! Clean residual mean=0.000015 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.170776 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 132 components and 0.170776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118262Jy sigma=0.000708 ! Fit after self-cal, rms=0.118289Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.1896e-05 Jy ! Component: 100 - total flux cleaned = 3.60528e-05 Jy ! Component: 150 - total flux cleaned = 3.77746e-05 Jy ! Component: 200 - total flux cleaned = 3.99223e-05 Jy ! Total flux subtracted in 200 components = 3.99223e-05 Jy ! Clean residual min=-0.002613 max=0.002391 Jy/beam ! Clean residual mean=0.000014 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.170816 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 141 components and 0.170816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118288Jy sigma=0.000708 ! Fit after self-cal, rms=0.118288Jy sigma=0.000708 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=18.05 mas, bpa=-19.23 degrees ! Estimated noise=1051.66 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.405 x 18.05 at -19.23 degrees (North through East) ! Clean map min=-0.0023435 max=0.12496 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.784 mas, bmaj=15.83 mas, bpa=-19.68 degrees ! Estimated noise=1479.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101232 Jy ! Component: 100 - total flux cleaned = 0.133077 Jy ! Component: 150 - total flux cleaned = 0.147928 Jy ! Component: 200 - total flux cleaned = 0.156664 Jy ! Total flux subtracted in 200 components = 0.156664 Jy ! Clean residual min=-0.004842 max=0.005124 Jy/beam ! Clean residual mean=-0.000012 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.156664 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.156664 Jy ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=18.05 mas, bpa=-19.23 degrees ! Estimated noise=1051.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00679325 Jy ! Component: 100 - total flux cleaned = 0.0102154 Jy ! Component: 150 - total flux cleaned = 0.0121725 Jy ! Component: 200 - total flux cleaned = 0.0127519 Jy ! Total flux subtracted in 200 components = 0.0127519 Jy ! Clean residual min=-0.002761 max=0.002575 Jy/beam ! Clean residual mean=0.000004 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.169416 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 74 components and 0.169416 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.179 mas, bmaj=31.47 mas, bpa=-5.4 degrees ! Estimated noise=1235.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772383 Jy ! Component: 100 - total flux cleaned = 0.000866699 Jy ! Component: 150 - total flux cleaned = 0.000947516 Jy ! Component: 200 - total flux cleaned = 0.000948333 Jy ! Total flux subtracted in 200 components = 0.000948333 Jy ! Clean residual min=-0.002743 max=0.002580 Jy/beam ! Clean residual mean=0.000010 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.170365 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.31132e-05 Jy ! Component: 100 - total flux cleaned = 6.64122e-05 Jy ! Component: 150 - total flux cleaned = 8.74926e-05 Jy ! Component: 200 - total flux cleaned = 0.000128673 Jy ! Total flux subtracted in 200 components = 0.000128673 Jy ! Clean residual min=-0.002728 max=0.002536 Jy/beam ! Clean residual mean=0.000011 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.170493 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.170493 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=18.05 mas, bpa=-19.23 degrees ! Estimated noise=1051.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000221809 Jy ! Component: 100 - total flux cleaned = -0.000191954 Jy ! Component: 150 - total flux cleaned = -0.000135486 Jy ! Component: 200 - total flux cleaned = -5.72157e-05 Jy ! Total flux subtracted in 200 components = -5.72157e-05 Jy ! Clean residual min=-0.002555 max=0.002333 Jy/beam ! Clean residual mean=0.000007 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.170436 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 99 components and 0.170436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118321Jy sigma=0.000708 ! Fit after self-cal, rms=0.118314Jy sigma=0.000708 wmodel J1307-3207_S_2017_10_21_pus_map.mod ! Writing 99 model components to file: J1307-3207_S_2017_10_21_pus_map.mod wobs J1307-3207_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1307-3207_S_2017_10_21_pus_uvs.fits wwins J1307-3207_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1307-3207_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000748616 Jy ! Component: 100 - total flux cleaned = -0.0011741 Jy ! Component: 150 - total flux cleaned = -0.00141656 Jy ! Component: 200 - total flux cleaned = -0.00145472 Jy ! Component: 250 - total flux cleaned = -0.00138101 Jy ! Component: 300 - total flux cleaned = -0.00131003 Jy ! Component: 350 - total flux cleaned = -0.00130964 Jy ! Component: 400 - total flux cleaned = -0.00134243 Jy ! Component: 450 - total flux cleaned = -0.00134205 Jy ! Component: 500 - total flux cleaned = -0.00131058 Jy ! Component: 550 - total flux cleaned = -0.00137194 Jy ! Component: 600 - total flux cleaned = -0.00140157 Jy ! Component: 650 - total flux cleaned = -0.00145994 Jy ! Component: 700 - total flux cleaned = -0.00148867 Jy ! Component: 750 - total flux cleaned = -0.001517 Jy ! Component: 800 - total flux cleaned = -0.00146277 Jy ! Component: 850 - total flux cleaned = -0.00148994 Jy ! Component: 900 - total flux cleaned = -0.00146391 Jy ! Component: 950 - total flux cleaned = -0.00156639 Jy ! Component: 1000 - total flux cleaned = -0.00156576 Jy ! Component: 1050 - total flux cleaned = -0.00151628 Jy ! Component: 1100 - total flux cleaned = -0.00146822 Jy ! Component: 1150 - total flux cleaned = -0.00144477 Jy ! Component: 1200 - total flux cleaned = -0.00142191 Jy ! Component: 1250 - total flux cleaned = -0.00144488 Jy ! Component: 1300 - total flux cleaned = -0.00133278 Jy ! Component: 1350 - total flux cleaned = -0.00131092 Jy ! Component: 1400 - total flux cleaned = -0.00122372 Jy ! Component: 1450 - total flux cleaned = -0.00120208 Jy ! Component: 1500 - total flux cleaned = -0.00113845 Jy ! Component: 1550 - total flux cleaned = -0.00105505 Jy ! Component: 1600 - total flux cleaned = -0.00103481 Jy ! Component: 1650 - total flux cleaned = -0.000974104 Jy ! Component: 1700 - total flux cleaned = -0.000974482 Jy ! Component: 1750 - total flux cleaned = -0.000994348 Jy ! Component: 1800 - total flux cleaned = -0.00097503 Jy ! Component: 1850 - total flux cleaned = -0.000975006 Jy ! Component: 1900 - total flux cleaned = -0.000936684 Jy ! Component: 1950 - total flux cleaned = -0.000880115 Jy ! Component: 2000 - total flux cleaned = -0.000861532 Jy ! Component: 2050 - total flux cleaned = -0.000788002 Jy ! Component: 2100 - total flux cleaned = -0.000751667 Jy ! Component: 2150 - total flux cleaned = -0.0007156 Jy ! Component: 2200 - total flux cleaned = -0.000697736 Jy ! Component: 2250 - total flux cleaned = -0.000662121 Jy ! Component: 2300 - total flux cleaned = -0.000591897 Jy ! Component: 2350 - total flux cleaned = -0.000591778 Jy ! Component: 2400 - total flux cleaned = -0.000557336 Jy ! Component: 2450 - total flux cleaned = -0.000489159 Jy ! Component: 2500 - total flux cleaned = -0.000489188 Jy ! Component: 2550 - total flux cleaned = -0.000455809 Jy ! Component: 2600 - total flux cleaned = -0.000439362 Jy ! Component: 2650 - total flux cleaned = -0.000439403 Jy ! Component: 2700 - total flux cleaned = -0.000455772 Jy ! Component: 2750 - total flux cleaned = -0.000439448 Jy ! Component: 2800 - total flux cleaned = -0.000439481 Jy ! Component: 2850 - total flux cleaned = -0.000439459 Jy ! Component: 2900 - total flux cleaned = -0.000439378 Jy ! Component: 2950 - total flux cleaned = -0.000423465 Jy ! Component: 3000 - total flux cleaned = -0.00040776 Jy ! Component: 3050 - total flux cleaned = -0.000392212 Jy ! Component: 3100 - total flux cleaned = -0.00037668 Jy ! Component: 3150 - total flux cleaned = -0.000392046 Jy ! Component: 3200 - total flux cleaned = -0.000407314 Jy ! Component: 3250 - total flux cleaned = -0.00034644 Jy ! Component: 3300 - total flux cleaned = -0.000346432 Jy ! Component: 3350 - total flux cleaned = -0.000331329 Jy ! Component: 3400 - total flux cleaned = -0.000316459 Jy ! Component: 3450 - total flux cleaned = -0.000301567 Jy ! Component: 3500 - total flux cleaned = -0.000286813 Jy ! Component: 3550 - total flux cleaned = -0.000301576 Jy ! Component: 3600 - total flux cleaned = -0.000286815 Jy ! Component: 3650 - total flux cleaned = -0.000257661 Jy ! Component: 3700 - total flux cleaned = -0.000272104 Jy ! Component: 3750 - total flux cleaned = -0.000243174 Jy ! Component: 3800 - total flux cleaned = -0.000257587 Jy ! Component: 3850 - total flux cleaned = -0.000214671 Jy ! Component: 3900 - total flux cleaned = -0.000214729 Jy ! Component: 3950 - total flux cleaned = -0.000186323 Jy ! Component: 4000 - total flux cleaned = -0.000172215 Jy ! Component: 4050 - total flux cleaned = -0.000214384 Jy ! Total flux subtracted in 4096 components = -0.000172448 Jy ! Clean residual min=-0.000772 max=0.000769 Jy/beam ! Clean residual mean=-0.000003 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.170264 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 340 components and 0.170264 Jy ![Exited script file: muppet] wmap "J1307-3207_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.405 x 18.05 at -19.23 degrees (North through East) ! Clean map min=-0.0028344 max=0.12727 Jy/beam ! Writing clean map to FITS file: J1307-3207_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.127266 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000256221 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.603979 0.603979 1.20796 2.41591 4.83183 9.66366 19.3273 38.6546 77.3093 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.405 x 18.05 at -19.23 degrees (North through East) ! Clean map min=-0.0028344 max=0.12727 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1307-3207_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:58:40 2019