! Started logfile: J1307-3207_S_2017_02_24_pus_uvs.log on Sat May 4 11:27:40 2019 obs J1307-3207_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1307-3207_S_2017_02_24_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.951579 visibilities/baseline/integration-bin. ! Found source: J1307-3207 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 16272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1307-3207_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.891945Jy sigma=0.035859 ! Fit after self-cal, rms=0.878122Jy sigma=0.035818 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=7.617 mas, bpa=-8.734 degrees ! Estimated noise=1081.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0530579 Jy ! Component: 100 - total flux cleaned = 0.0583211 Jy ! Total flux subtracted in 100 components = 0.0583211 Jy ! Clean residual min=-0.020013 max=0.030367 Jy/beam ! Clean residual mean=-0.000027 rms=0.006837 Jy/beam ! Combined flux in latest and established models = 0.0583211 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0583211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215309Jy sigma=0.002180 ! Fit after self-cal, rms=0.215259Jy sigma=0.002179 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.738 mas, bmaj=9.6 mas, bpa=-5.718 degrees ! Estimated noise=522.894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114827 Jy ! Component: 100 - total flux cleaned = 0.0138126 Jy ! Component: 150 - total flux cleaned = 0.0141821 Jy ! Component: 200 - total flux cleaned = 0.0141855 Jy ! Total flux subtracted in 200 components = 0.0141855 Jy ! Clean residual min=-0.021372 max=0.037590 Jy/beam ! Clean residual mean=-0.000125 rms=0.007838 Jy/beam ! Combined flux in latest and established models = 0.0725066 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 0.0725066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210850Jy sigma=0.002543 ! Fit after self-cal, rms=0.210883Jy sigma=0.002543 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 23.46 FD 0.68 HN 0.95 KP 0.66 ! LA 0.65 MK 1.02 NL 0.78 OV 0.70 ! PT 0.66 SC 0.69 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 24.13 FD 0.64 HN 1.27 KP 0.63 ! LA 0.62 MK 1.15 NL 0.72 OV 0.71 ! PT 0.65 SC 0.76 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.69 FD 0.65 HN 0.94 KP 0.66 ! LA 0.64 MK 1.07 NL 0.80 OV 0.64 ! PT 0.62 SC 0.75 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 16.05 FD 0.65 HN 0.83 KP 1.00* ! LA 0.61 MK 1.07 NL 1.00* OV 0.60 ! PT 0.67 SC 1.00* ! ! ! Fit before self-cal, rms=0.210883Jy sigma=0.002543 ! Fit after self-cal, rms=2.256500Jy sigma=0.000764 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=9.655 mas, bpa=-3.276 degrees ! Estimated noise=581.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00872304 Jy ! Component: 100 - total flux cleaned = 0.0125201 Jy ! Component: 150 - total flux cleaned = 0.0131701 Jy ! Component: 200 - total flux cleaned = 0.0133242 Jy ! Total flux subtracted in 200 components = 0.0133242 Jy ! Clean residual min=-0.009618 max=0.005599 Jy/beam ! Clean residual mean=-0.000001 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 0.0858307 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.0858307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.254676Jy sigma=0.000773 ! Fit after self-cal, rms=2.255355Jy sigma=0.000735 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.255355Jy sigma=0.000735 ! Fit after self-cal, rms=2.925364Jy sigma=0.000727 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=9.513 mas, bpa=-3.841 degrees ! Estimated noise=625.775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00857184 Jy ! Component: 100 - total flux cleaned = 0.0122718 Jy ! Component: 150 - total flux cleaned = 0.0133281 Jy ! Component: 200 - total flux cleaned = 0.0134692 Jy ! Total flux subtracted in 200 components = 0.0134692 Jy ! Clean residual min=-0.009981 max=0.005756 Jy/beam ! Clean residual mean=-0.000001 rms=0.001942 Jy/beam ! Combined flux in latest and established models = 0.0992999 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.0993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.923450Jy sigma=0.000736 ! Fit after self-cal, rms=2.923457Jy sigma=0.000736 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219436 Jy ! Component: 100 - total flux cleaned = 0.000342687 Jy ! Component: 150 - total flux cleaned = 0.000452065 Jy ! Component: 200 - total flux cleaned = 0.000501793 Jy ! Total flux subtracted in 200 components = 0.000501793 Jy ! Clean residual min=-0.010070 max=0.005736 Jy/beam ! Clean residual mean=-0.000001 rms=0.001941 Jy/beam ! Combined flux in latest and established models = 0.0998017 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.0998017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.923303Jy sigma=0.000737 ! Fit after self-cal, rms=2.923313Jy sigma=0.000737 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.923313Jy sigma=0.000737 ! Fit after self-cal, rms=3.814150Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=9.495 mas, bpa=-3.795 degrees ! Estimated noise=645.331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304342 Jy ! Component: 100 - total flux cleaned = 0.00418394 Jy ! Component: 150 - total flux cleaned = 0.00462539 Jy ! Component: 200 - total flux cleaned = 0.00466643 Jy ! Total flux subtracted in 200 components = 0.00466643 Jy ! Clean residual min=-0.003894 max=0.003093 Jy/beam ! Clean residual mean=-0.000001 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.104468 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.104468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.813774Jy sigma=0.000683 ! Fit after self-cal, rms=3.813705Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.44063e-05 Jy ! Component: 100 - total flux cleaned = 3.94156e-05 Jy ! Component: 150 - total flux cleaned = 2.49072e-05 Jy ! Component: 200 - total flux cleaned = 3.91464e-05 Jy ! Total flux subtracted in 200 components = 3.91464e-05 Jy ! Clean residual min=-0.003849 max=0.002947 Jy/beam ! Clean residual mean=-0.000001 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.104507 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.104507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.813688Jy sigma=0.000681 ! Fit after self-cal, rms=3.813685Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.813685Jy sigma=0.000681 ! Fit after self-cal, rms=4.025414Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.224 mas, bmaj=23.49 mas, bpa=-1.821 degrees ! Estimated noise=774.513 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039575 Jy ! Component: 100 - total flux cleaned = 0.00517203 Jy ! Component: 150 - total flux cleaned = 0.00556616 Jy ! Component: 200 - total flux cleaned = 0.00558268 Jy ! Total flux subtracted in 200 components = 0.00558268 Jy ! Clean residual min=-0.006358 max=0.003900 Jy/beam ! Clean residual mean=0.000001 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.11009 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 0.11009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.024974Jy sigma=0.000682 ! Fit after self-cal, rms=4.024987Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.74485e-05 Jy ! Component: 100 - total flux cleaned = 2.54363e-05 Jy ! Component: 150 - total flux cleaned = 2.40856e-05 Jy ! Component: 200 - total flux cleaned = 2.43647e-05 Jy ! Total flux subtracted in 200 components = 2.43647e-05 Jy ! Clean residual min=-0.006353 max=0.003893 Jy/beam ! Clean residual mean=0.000001 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.110114 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 72 components and 0.110114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.024986Jy sigma=0.000682 ! Fit after self-cal, rms=4.024991Jy sigma=0.000681 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=9.395 mas, bpa=-3.87 degrees ! Estimated noise=668.11 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.391 x 9.395 at -3.87 degrees (North through East) ! Clean map min=-0.0040442 max=0.087207 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.581 mas, bmaj=7.389 mas, bpa=-6.339 degrees ! Estimated noise=1432.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0720773 Jy ! Component: 100 - total flux cleaned = 0.091182 Jy ! Component: 150 - total flux cleaned = 0.099716 Jy ! Component: 200 - total flux cleaned = 0.104251 Jy ! Total flux subtracted in 200 components = 0.104251 Jy ! Clean residual min=-0.004603 max=0.004127 Jy/beam ! Clean residual mean=-0.000003 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.104251 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.104251 Jy ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=9.395 mas, bpa=-3.87 degrees ! Estimated noise=668.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002812 Jy ! Component: 100 - total flux cleaned = 0.00365303 Jy ! Component: 150 - total flux cleaned = 0.00386644 Jy ! Component: 200 - total flux cleaned = 0.0040416 Jy ! Total flux subtracted in 200 components = 0.0040416 Jy ! Clean residual min=-0.004134 max=0.003262 Jy/beam ! Clean residual mean=-0.000001 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.108293 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.108293 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.224 mas, bmaj=23.49 mas, bpa=-1.821 degrees ! Estimated noise=774.513 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000957105 Jy ! Component: 100 - total flux cleaned = 0.000988761 Jy ! Component: 150 - total flux cleaned = 0.00104482 Jy ! Component: 200 - total flux cleaned = 0.00109117 Jy ! Total flux subtracted in 200 components = 0.00109117 Jy ! Clean residual min=-0.006215 max=0.003903 Jy/beam ! Clean residual mean=-0.000000 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 0.109384 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.75322e-05 Jy ! Component: 100 - total flux cleaned = 9.0396e-05 Jy ! Component: 150 - total flux cleaned = 0.000121929 Jy ! Component: 200 - total flux cleaned = 0.000151643 Jy ! Total flux subtracted in 200 components = 0.000151643 Jy ! Clean residual min=-0.006232 max=0.003911 Jy/beam ! Clean residual mean=-0.000000 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.109535 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.109535 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=9.395 mas, bpa=-3.87 degrees ! Estimated noise=668.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000567983 Jy ! Component: 100 - total flux cleaned = -0.00056716 Jy ! Component: 150 - total flux cleaned = -0.000546735 Jy ! Component: 200 - total flux cleaned = -0.000529716 Jy ! Total flux subtracted in 200 components = -0.000529716 Jy ! Clean residual min=-0.004052 max=0.003105 Jy/beam ! Clean residual mean=-0.000001 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.109006 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.109006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.024968Jy sigma=0.000681 ! Fit after self-cal, rms=4.024949Jy sigma=0.000681 wmodel J1307-3207_S_2017_02_24_pus_map.mod ! Writing 44 model components to file: J1307-3207_S_2017_02_24_pus_map.mod wobs J1307-3207_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1307-3207_S_2017_02_24_pus_uvs.fits wwins J1307-3207_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J1307-3207_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018262 Jy ! Component: 100 - total flux cleaned = -0.00332592 Jy ! Component: 150 - total flux cleaned = -0.00445162 Jy ! Component: 200 - total flux cleaned = -0.00509362 Jy ! Component: 250 - total flux cleaned = -0.0054524 Jy ! Component: 300 - total flux cleaned = -0.00569963 Jy ! Component: 350 - total flux cleaned = -0.00579633 Jy ! Component: 400 - total flux cleaned = -0.00584378 Jy ! Component: 450 - total flux cleaned = -0.00598259 Jy ! Component: 500 - total flux cleaned = -0.00611847 Jy ! Component: 550 - total flux cleaned = -0.00611813 Jy ! Component: 600 - total flux cleaned = -0.00616222 Jy ! Component: 650 - total flux cleaned = -0.00620518 Jy ! Component: 700 - total flux cleaned = -0.00612024 Jy ! Component: 750 - total flux cleaned = -0.00611998 Jy ! Component: 800 - total flux cleaned = -0.00616116 Jy ! Component: 850 - total flux cleaned = -0.00628332 Jy ! Component: 900 - total flux cleaned = -0.00624299 Jy ! Component: 950 - total flux cleaned = -0.00632331 Jy ! Component: 1000 - total flux cleaned = -0.00640228 Jy ! Component: 1050 - total flux cleaned = -0.0065189 Jy ! Component: 1100 - total flux cleaned = -0.00651854 Jy ! Component: 1150 - total flux cleaned = -0.00651871 Jy ! Component: 1200 - total flux cleaned = -0.00655655 Jy ! Component: 1250 - total flux cleaned = -0.00655611 Jy ! Component: 1300 - total flux cleaned = -0.00659278 Jy ! Component: 1350 - total flux cleaned = -0.00655642 Jy ! Component: 1400 - total flux cleaned = -0.00659231 Jy ! Component: 1450 - total flux cleaned = -0.00652032 Jy ! Component: 1500 - total flux cleaned = -0.00648498 Jy ! Component: 1550 - total flux cleaned = -0.00662529 Jy ! Component: 1600 - total flux cleaned = -0.00655584 Jy ! Component: 1650 - total flux cleaned = -0.00665941 Jy ! Component: 1700 - total flux cleaned = -0.00665977 Jy ! Component: 1750 - total flux cleaned = -0.0067273 Jy ! Component: 1800 - total flux cleaned = -0.00669415 Jy ! Component: 1850 - total flux cleaned = -0.00676061 Jy ! Component: 1900 - total flux cleaned = -0.00679339 Jy ! Component: 1950 - total flux cleaned = -0.00676048 Jy ! Component: 2000 - total flux cleaned = -0.00666368 Jy ! Component: 2050 - total flux cleaned = -0.00675971 Jy ! Component: 2100 - total flux cleaned = -0.00663244 Jy ! Component: 2150 - total flux cleaned = -0.00672672 Jy ! Component: 2200 - total flux cleaned = -0.00663256 Jy ! Component: 2250 - total flux cleaned = -0.00663242 Jy ! Component: 2300 - total flux cleaned = -0.00660146 Jy ! Component: 2350 - total flux cleaned = -0.00654018 Jy ! Component: 2400 - total flux cleaned = -0.00653983 Jy ! Component: 2450 - total flux cleaned = -0.00653982 Jy ! Component: 2500 - total flux cleaned = -0.0064802 Jy ! Component: 2550 - total flux cleaned = -0.00648011 Jy ! Component: 2600 - total flux cleaned = -0.00647992 Jy ! Component: 2650 - total flux cleaned = -0.00639213 Jy ! Component: 2700 - total flux cleaned = -0.00645004 Jy ! Component: 2750 - total flux cleaned = -0.00642127 Jy ! Component: 2800 - total flux cleaned = -0.00636419 Jy ! Component: 2850 - total flux cleaned = -0.00639256 Jy ! Component: 2900 - total flux cleaned = -0.00636426 Jy ! Component: 2950 - total flux cleaned = -0.00642034 Jy ! Component: 3000 - total flux cleaned = -0.00636448 Jy ! Component: 3050 - total flux cleaned = -0.0063369 Jy ! Component: 3100 - total flux cleaned = -0.00636462 Jy ! Component: 3150 - total flux cleaned = -0.00639185 Jy ! Component: 3200 - total flux cleaned = -0.00633743 Jy ! Component: 3250 - total flux cleaned = -0.00631061 Jy ! Component: 3300 - total flux cleaned = -0.00628388 Jy ! Component: 3350 - total flux cleaned = -0.0062839 Jy ! Component: 3400 - total flux cleaned = -0.00631037 Jy ! Component: 3450 - total flux cleaned = -0.00625778 Jy ! Component: 3500 - total flux cleaned = -0.00631025 Jy ! Component: 3550 - total flux cleaned = -0.00628422 Jy ! Component: 3600 - total flux cleaned = -0.00631011 Jy ! Component: 3650 - total flux cleaned = -0.00633577 Jy ! Component: 3700 - total flux cleaned = -0.00633559 Jy ! Component: 3750 - total flux cleaned = -0.00628473 Jy ! Component: 3800 - total flux cleaned = -0.00628493 Jy ! Component: 3850 - total flux cleaned = -0.00628513 Jy ! Component: 3900 - total flux cleaned = -0.00631021 Jy ! Component: 3950 - total flux cleaned = -0.00623586 Jy ! Component: 4000 - total flux cleaned = -0.00628525 Jy ! Component: 4050 - total flux cleaned = -0.00628518 Jy ! Total flux subtracted in 4096 components = -0.00626061 Jy ! Clean residual min=-0.001286 max=0.001218 Jy/beam ! Clean residual mean=-0.000001 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.102745 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 374 components and 0.102745 Jy ![Exited script file: muppet] wmap "J1307-3207_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.391 x 9.395 at -3.87 degrees (North through East) ! Clean map min=-0.0034231 max=0.089905 Jy/beam ! Writing clean map to FITS file: J1307-3207_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0899051 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000492285 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.64268 1.64268 3.28537 6.57073 13.1415 26.2829 52.5659 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.391 x 9.395 at -3.87 degrees (North through East) ! Clean map min=-0.0034231 max=0.089905 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1307-3207_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:27:45 2019