! Started logfile: J1307+7649_S_2017_10_09_pus_uvs.log on Sun May 12 13:13:24 2019 obs J1307+7649_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1307+7649_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.759893 visibilities/baseline/integration-bin. ! Found source: J1307+7649 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 15976 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1307+7649_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 307 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 779 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.874402Jy sigma=0.007317 ! Fit after self-cal, rms=0.857569Jy sigma=0.007194 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=5.881 mas, bpa=-63.8 degrees ! Estimated noise=1482.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10076 Jy ! Component: 100 - total flux cleaned = 0.154823 Jy ! Total flux subtracted in 100 components = 0.154823 Jy ! Clean residual min=-0.020363 max=0.034615 Jy/beam ! Clean residual mean=0.000077 rms=0.006510 Jy/beam ! Combined flux in latest and established models = 0.154823 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.154823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151977Jy sigma=0.001212 ! Fit after self-cal, rms=0.151309Jy sigma=0.001207 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=6.729 mas, bpa=-64.56 degrees ! Estimated noise=792.995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0690158 Jy ! Component: 100 - total flux cleaned = 0.112721 Jy ! Component: 150 - total flux cleaned = 0.140978 Jy ! Component: 200 - total flux cleaned = 0.159267 Jy ! Total flux subtracted in 200 components = 0.159267 Jy ! Clean residual min=-0.016221 max=0.028687 Jy/beam ! Clean residual mean=0.000116 rms=0.005954 Jy/beam ! Combined flux in latest and established models = 0.31409 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 55 components and 0.31409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111234Jy sigma=0.000851 ! Fit after self-cal, rms=0.109622Jy sigma=0.000840 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 0.99 HN 1.27 KP 1.01 ! LA 0.94 MK 0.97 NL 1.07 OV 1.00* ! PT 0.86 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.39 FD 1.04 HN 1.34 KP 1.00 ! LA 0.91 MK 0.99 NL 1.00* OV 1.00* ! PT 0.84 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 1.06 HN 1.33 KP 0.89 ! LA 0.71 MK 1.25 NL 1.61 OV 1.00* ! PT 0.84 ! ! ! Correcting IF 4. ! A total of 210 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.33 KP 1.00* ! LA 0.83 MK 0.58 NL 1.00* OV 1.00* ! PT 1.00 ! ! ! Fit before self-cal, rms=0.109622Jy sigma=0.000840 ! Fit after self-cal, rms=0.117005Jy sigma=0.000743 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.59 mas, bmaj=6.922 mas, bpa=-64.37 degrees ! Estimated noise=867.582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (63, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183333 Jy ! Component: 100 - total flux cleaned = 0.0241043 Jy ! Component: 150 - total flux cleaned = 0.0263663 Jy ! Component: 200 - total flux cleaned = 0.0269455 Jy ! Total flux subtracted in 200 components = 0.0269455 Jy ! Clean residual min=-0.009785 max=0.011937 Jy/beam ! Clean residual mean=0.000005 rms=0.002985 Jy/beam ! Combined flux in latest and established models = 0.341036 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 98 components and 0.341036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114064Jy sigma=0.000715 ! Fit after self-cal, rms=0.114053Jy sigma=0.000710 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114053Jy sigma=0.000710 ! Fit after self-cal, rms=0.105229Jy sigma=0.000691 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=6.943 mas, bpa=-65.09 degrees ! Estimated noise=834.795 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274149 Jy ! Component: 100 - total flux cleaned = 0.00180777 Jy ! Component: 150 - total flux cleaned = 0.00142457 Jy ! Component: 200 - total flux cleaned = 0.00119474 Jy ! Total flux subtracted in 200 components = 0.00119474 Jy ! Clean residual min=-0.006926 max=0.008717 Jy/beam ! Clean residual mean=-0.000027 rms=0.002070 Jy/beam ! Combined flux in latest and established models = 0.34223 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 117 components and 0.34223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104632Jy sigma=0.000688 ! Fit after self-cal, rms=0.104381Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427939 Jy ! Component: 100 - total flux cleaned = 0.000200615 Jy ! Component: 150 - total flux cleaned = -4.48176e-06 Jy ! Component: 200 - total flux cleaned = -0.000284161 Jy ! Total flux subtracted in 200 components = -0.000284161 Jy ! Clean residual min=-0.006735 max=0.008571 Jy/beam ! Clean residual mean=-0.000027 rms=0.002053 Jy/beam ! Combined flux in latest and established models = 0.341946 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 126 components and 0.341946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104107Jy sigma=0.000685 ! Fit after self-cal, rms=0.104096Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104096Jy sigma=0.000685 ! Fit after self-cal, rms=0.104282Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=7.004 mas, bpa=-64.56 degrees ! Estimated noise=837.659 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362263 Jy ! Component: 100 - total flux cleaned = 0.000183575 Jy ! Component: 150 - total flux cleaned = -6.64173e-05 Jy ! Component: 200 - total flux cleaned = -0.000222006 Jy ! Total flux subtracted in 200 components = -0.000222006 Jy ! Clean residual min=-0.006621 max=0.008188 Jy/beam ! Clean residual mean=-0.000023 rms=0.002024 Jy/beam ! Combined flux in latest and established models = 0.341724 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 141 components and 0.341724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104103Jy sigma=0.000684 ! Fit after self-cal, rms=0.104101Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.37592e-06 Jy ! Component: 100 - total flux cleaned = -0.000148504 Jy ! Component: 150 - total flux cleaned = -0.000220278 Jy ! Component: 200 - total flux cleaned = -0.000358668 Jy ! Total flux subtracted in 200 components = -0.000358668 Jy ! Clean residual min=-0.006571 max=0.008119 Jy/beam ! Clean residual mean=-0.000023 rms=0.002011 Jy/beam ! Combined flux in latest and established models = 0.341366 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 149 components and 0.341366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103982Jy sigma=0.000683 ! Fit after self-cal, rms=0.103993Jy sigma=0.000683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103993Jy sigma=0.000683 ! Fit after self-cal, rms=0.104893Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.435 mas, bmaj=12.1 mas, bpa=-81.14 degrees ! Estimated noise=1012.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013422 Jy ! Component: 100 - total flux cleaned = -0.0014913 Jy ! Component: 150 - total flux cleaned = -0.00167848 Jy ! Component: 200 - total flux cleaned = -0.00173478 Jy ! Total flux subtracted in 200 components = -0.00173478 Jy ! Clean residual min=-0.010497 max=0.011437 Jy/beam ! Clean residual mean=-0.000040 rms=0.003006 Jy/beam ! Combined flux in latest and established models = 0.339631 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 161 components and 0.339631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104869Jy sigma=0.000683 ! Fit after self-cal, rms=0.104854Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000383816 Jy ! Component: 100 - total flux cleaned = -0.000440067 Jy ! Component: 150 - total flux cleaned = -0.000441983 Jy ! Component: 200 - total flux cleaned = -0.000489396 Jy ! Total flux subtracted in 200 components = -0.000489396 Jy ! Clean residual min=-0.010492 max=0.011368 Jy/beam ! Clean residual mean=-0.000039 rms=0.002988 Jy/beam ! Combined flux in latest and established models = 0.339142 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 163 components and 0.339142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104840Jy sigma=0.000682 ! Fit after self-cal, rms=0.104837Jy sigma=0.000682 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=7.041 mas, bpa=-64.37 degrees ! Estimated noise=845.711 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.571 x 7.041 at -64.37 degrees (North through East) ! Clean map min=-0.0068403 max=0.12231 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=6.152 mas, bpa=-64.11 degrees ! Estimated noise=1616.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109538 Jy ! Component: 100 - total flux cleaned = 0.168657 Jy ! Component: 150 - total flux cleaned = 0.209379 Jy ! Component: 200 - total flux cleaned = 0.239833 Jy ! Total flux subtracted in 200 components = 0.239833 Jy ! Clean residual min=-0.014499 max=0.022985 Jy/beam ! Clean residual mean=0.000015 rms=0.004205 Jy/beam ! Combined flux in latest and established models = 0.239833 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.239833 Jy ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=7.041 mas, bpa=-64.37 degrees ! Estimated noise=845.711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0358932 Jy ! Component: 100 - total flux cleaned = 0.0582336 Jy ! Component: 150 - total flux cleaned = 0.0733969 Jy ! Component: 200 - total flux cleaned = 0.0839834 Jy ! Total flux subtracted in 200 components = 0.0839834 Jy ! Clean residual min=-0.007782 max=0.008674 Jy/beam ! Clean residual mean=-0.000020 rms=0.002205 Jy/beam ! Combined flux in latest and established models = 0.323816 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 124 components and 0.323816 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.435 mas, bmaj=12.1 mas, bpa=-81.14 degrees ! Estimated noise=1012.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010992 Jy ! Component: 100 - total flux cleaned = 0.0135433 Jy ! Component: 150 - total flux cleaned = 0.0142802 Jy ! Component: 200 - total flux cleaned = 0.0144448 Jy ! Total flux subtracted in 200 components = 0.0144448 Jy ! Clean residual min=-0.009171 max=0.010330 Jy/beam ! Clean residual mean=-0.000042 rms=0.002892 Jy/beam ! Combined flux in latest and established models = 0.338261 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259037 Jy ! Component: 100 - total flux cleaned = 0.000256615 Jy ! Component: 150 - total flux cleaned = 0.000256717 Jy ! Component: 200 - total flux cleaned = 0.000166606 Jy ! Total flux subtracted in 200 components = 0.000166606 Jy ! Clean residual min=-0.009000 max=0.010137 Jy/beam ! Clean residual mean=-0.000039 rms=0.002829 Jy/beam ! Combined flux in latest and established models = 0.338428 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 162 components and 0.338428 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=7.041 mas, bpa=-64.37 degrees ! Estimated noise=845.711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649198 Jy ! Component: 100 - total flux cleaned = 0.000795898 Jy ! Component: 150 - total flux cleaned = 0.000793385 Jy ! Component: 200 - total flux cleaned = 0.000792568 Jy ! Total flux subtracted in 200 components = 0.000792568 Jy ! Clean residual min=-0.006643 max=0.007333 Jy/beam ! Clean residual mean=-0.000019 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 0.33922 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 191 components and 0.33922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103742Jy sigma=0.000676 ! Fit after self-cal, rms=0.103406Jy sigma=0.000674 wmodel J1307+7649_S_2017_10_09_pus_map.mod ! Writing 191 model components to file: J1307+7649_S_2017_10_09_pus_map.mod wobs J1307+7649_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1307+7649_S_2017_10_09_pus_uvs.fits wwins J1307+7649_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J1307+7649_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144553 Jy ! Component: 100 - total flux cleaned = 0.00175811 Jy ! Component: 150 - total flux cleaned = 0.00263623 Jy ! Component: 200 - total flux cleaned = 0.00372026 Jy ! Component: 250 - total flux cleaned = 0.00439798 Jy ! Component: 300 - total flux cleaned = 0.00488328 Jy ! Component: 350 - total flux cleaned = 0.00503843 Jy ! Component: 400 - total flux cleaned = 0.00547517 Jy ! Component: 450 - total flux cleaned = 0.00547456 Jy ! Component: 500 - total flux cleaned = 0.00560941 Jy ! Component: 550 - total flux cleaned = 0.00561021 Jy ! Component: 600 - total flux cleaned = 0.00554884 Jy ! Component: 650 - total flux cleaned = 0.00537396 Jy ! Component: 700 - total flux cleaned = 0.00514677 Jy ! Component: 750 - total flux cleaned = 0.00503594 Jy ! Component: 800 - total flux cleaned = 0.00492767 Jy ! Component: 850 - total flux cleaned = 0.00466757 Jy ! Component: 900 - total flux cleaned = 0.00441661 Jy ! Component: 950 - total flux cleaned = 0.0044173 Jy ! Component: 1000 - total flux cleaned = 0.00446407 Jy ! Component: 1050 - total flux cleaned = 0.00446427 Jy ! Component: 1100 - total flux cleaned = 0.00446359 Jy ! Component: 1150 - total flux cleaned = 0.00446188 Jy ! Component: 1200 - total flux cleaned = 0.00433498 Jy ! Component: 1250 - total flux cleaned = 0.00429265 Jy ! Component: 1300 - total flux cleaned = 0.00409106 Jy ! Component: 1350 - total flux cleaned = 0.00401393 Jy ! Component: 1400 - total flux cleaned = 0.00397715 Jy ! Component: 1450 - total flux cleaned = 0.00393977 Jy ! Component: 1500 - total flux cleaned = 0.00383141 Jy ! Component: 1550 - total flux cleaned = 0.00390315 Jy ! Component: 1600 - total flux cleaned = 0.00383464 Jy ! Component: 1650 - total flux cleaned = 0.00383606 Jy ! Component: 1700 - total flux cleaned = 0.00386969 Jy ! Component: 1750 - total flux cleaned = 0.00377141 Jy ! Component: 1800 - total flux cleaned = 0.00370833 Jy ! Component: 1850 - total flux cleaned = 0.00377167 Jy ! Component: 1900 - total flux cleaned = 0.00380232 Jy ! Component: 1950 - total flux cleaned = 0.00377185 Jy ! Component: 2000 - total flux cleaned = 0.0038013 Jy ! Component: 2050 - total flux cleaned = 0.00380171 Jy ! Component: 2100 - total flux cleaned = 0.00388743 Jy ! Component: 2150 - total flux cleaned = 0.00388793 Jy ! Component: 2200 - total flux cleaned = 0.00388822 Jy ! Component: 2250 - total flux cleaned = 0.00383466 Jy ! Component: 2300 - total flux cleaned = 0.00388851 Jy ! Component: 2350 - total flux cleaned = 0.00383553 Jy ! Component: 2400 - total flux cleaned = 0.00383557 Jy ! Component: 2450 - total flux cleaned = 0.00378456 Jy ! Component: 2500 - total flux cleaned = 0.00391106 Jy ! Component: 2550 - total flux cleaned = 0.00388632 Jy ! Component: 2600 - total flux cleaned = 0.00393518 Jy ! Component: 2650 - total flux cleaned = 0.00395925 Jy ! Component: 2700 - total flux cleaned = 0.00395918 Jy ! Component: 2750 - total flux cleaned = 0.00402988 Jy ! Component: 2800 - total flux cleaned = 0.00400659 Jy ! Component: 2850 - total flux cleaned = 0.00400665 Jy ! Component: 2900 - total flux cleaned = 0.00402923 Jy ! Component: 2950 - total flux cleaned = 0.00398437 Jy ! Component: 3000 - total flux cleaned = 0.00400638 Jy ! Component: 3050 - total flux cleaned = 0.0039848 Jy ! Component: 3100 - total flux cleaned = 0.00396352 Jy ! Component: 3150 - total flux cleaned = 0.00400628 Jy ! Component: 3200 - total flux cleaned = 0.0039848 Jy ! Component: 3250 - total flux cleaned = 0.00392251 Jy ! Component: 3300 - total flux cleaned = 0.00390214 Jy ! Component: 3350 - total flux cleaned = 0.00386109 Jy ! Component: 3400 - total flux cleaned = 0.00382055 Jy ! Component: 3450 - total flux cleaned = 0.0037602 Jy ! Component: 3500 - total flux cleaned = 0.0036808 Jy ! Component: 3550 - total flux cleaned = 0.00362161 Jy ! Component: 3600 - total flux cleaned = 0.00348461 Jy ! Component: 3650 - total flux cleaned = 0.00338755 Jy ! Component: 3700 - total flux cleaned = 0.00327208 Jy ! Component: 3750 - total flux cleaned = 0.00319569 Jy ! Component: 3800 - total flux cleaned = 0.00310095 Jy ! Component: 3850 - total flux cleaned = 0.00298816 Jy ! Component: 3900 - total flux cleaned = 0.00287616 Jy ! Component: 3950 - total flux cleaned = 0.00280186 Jy ! Component: 4000 - total flux cleaned = 0.00270971 Jy ! Component: 4050 - total flux cleaned = 0.00263635 Jy ! Total flux subtracted in 4096 components = 0.00256366 Jy ! Clean residual min=-0.000998 max=0.001256 Jy/beam ! Clean residual mean=0.000001 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.341784 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 517 components and 0.341784 Jy ![Exited script file: muppet] wmap "J1307+7649_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.571 x 7.041 at -64.37 degrees (North through East) ! Clean map min=-0.0044438 max=0.13232 Jy/beam ! Writing clean map to FITS file: J1307+7649_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.132315 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000319578 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.724585 0.724585 1.44917 2.89834 5.79668 11.5934 23.1867 46.3735 92.7469 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.132 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.571 x 7.041 at -64.37 degrees (North through East) ! Clean map min=-0.0044438 max=0.13232 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1307+7649_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:13:29 2019