! Started logfile: J1306+8008_S_2017_10_21_pus_uvs.log on Sat May 11 20:58:29 2019 obs J1306+8008_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1306+8008_S_2017_10_21_pus_uva.fits ! AN table 1: 218 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.846075 visibilities/baseline/integration-bin. ! Found source: J1306+8008 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 26560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1306+8008_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 281 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 221 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1038 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.913195Jy sigma=0.007971 ! Fit after self-cal, rms=0.892885Jy sigma=0.007795 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=7.62 mas, bpa=40.83 degrees ! Estimated noise=1081.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0831318 Jy ! Component: 100 - total flux cleaned = 0.102998 Jy ! Total flux subtracted in 100 components = 0.102998 Jy ! Clean residual min=-0.005955 max=0.009998 Jy/beam ! Clean residual mean=-0.000008 rms=0.001894 Jy/beam ! Combined flux in latest and established models = 0.102998 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.102998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127609Jy sigma=0.001026 ! Fit after self-cal, rms=0.127579Jy sigma=0.001026 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=8.291 mas, bpa=38.56 degrees ! Estimated noise=581.831 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145018 Jy ! Component: 100 - total flux cleaned = 0.0214217 Jy ! Component: 150 - total flux cleaned = 0.0218001 Jy ! Component: 200 - total flux cleaned = 0.0216528 Jy ! Total flux subtracted in 200 components = 0.0216528 Jy ! Clean residual min=-0.007420 max=0.008466 Jy/beam ! Clean residual mean=-0.000038 rms=0.002839 Jy/beam ! Combined flux in latest and established models = 0.124651 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.124651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125805Jy sigma=0.001013 ! Fit after self-cal, rms=0.125772Jy sigma=0.001013 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.85 HN 0.99 KP 1.14 ! LA 1.08 MK 1.00 NL 1.03 OV 1.00 ! PT 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.94 HN 1.01 KP 1.04 ! LA 1.01 MK 0.99 NL 0.94 OV 0.97 ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.87 HN 1.04 KP 1.11 ! LA 0.84 MK 1.03 NL 1.31 OV 0.98 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.02 KP 1.00* ! LA 0.81 MK 1.09 NL 1.00* OV 1.00* ! PT 0.96 ! ! ! Fit before self-cal, rms=0.125772Jy sigma=0.001013 ! Fit after self-cal, rms=0.110503Jy sigma=0.001008 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=8.445 mas, bpa=38.97 degrees ! Estimated noise=574.361 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00418124 Jy ! Component: 100 - total flux cleaned = -0.00558579 Jy ! Component: 150 - total flux cleaned = -0.00609157 Jy ! Component: 200 - total flux cleaned = -0.00646841 Jy ! Total flux subtracted in 200 components = -0.00646841 Jy ! Clean residual min=-0.006921 max=0.008887 Jy/beam ! Clean residual mean=-0.000051 rms=0.002674 Jy/beam ! Combined flux in latest and established models = 0.118183 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.118183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110321Jy sigma=0.001006 ! Fit after self-cal, rms=0.110374Jy sigma=0.001005 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110374Jy sigma=0.001005 ! Fit after self-cal, rms=0.099475Jy sigma=0.000990 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.749 mas, bmaj=8.39 mas, bpa=39.28 degrees ! Estimated noise=575.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00066602 Jy ! Component: 100 - total flux cleaned = -0.000927185 Jy ! Component: 150 - total flux cleaned = -0.00115295 Jy ! Component: 200 - total flux cleaned = -0.00135005 Jy ! Total flux subtracted in 200 components = -0.00135005 Jy ! Clean residual min=-0.005451 max=0.013505 Jy/beam ! Clean residual mean=-0.000063 rms=0.002270 Jy/beam ! Combined flux in latest and established models = 0.116833 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.116833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099412Jy sigma=0.000990 ! Fit after self-cal, rms=0.099746Jy sigma=0.000989 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00998902 Jy ! Component: 100 - total flux cleaned = 0.00953868 Jy ! Component: 150 - total flux cleaned = 0.00893249 Jy ! Component: 200 - total flux cleaned = 0.00806454 Jy ! Total flux subtracted in 200 components = 0.00806454 Jy ! Clean residual min=-0.005200 max=0.009752 Jy/beam ! Clean residual mean=-0.000036 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 0.124897 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 76 components and 0.124897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098636Jy sigma=0.000973 ! Fit after self-cal, rms=0.098494Jy sigma=0.000971 ! Inverting map ! Added new window around map position (-19, -80). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00722896 Jy ! Component: 100 - total flux cleaned = 0.00782575 Jy ! Component: 150 - total flux cleaned = 0.00720341 Jy ! Component: 200 - total flux cleaned = 0.00706822 Jy ! Total flux subtracted in 200 components = 0.00706822 Jy ! Clean residual min=-0.004792 max=0.006905 Jy/beam ! Clean residual mean=-0.000022 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.131965 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 106 components and 0.131965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097835Jy sigma=0.000963 ! Fit after self-cal, rms=0.097775Jy sigma=0.000962 ! Inverting map ! Added new window around map position (13, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00672108 Jy ! Component: 100 - total flux cleaned = 0.00851262 Jy ! Component: 150 - total flux cleaned = 0.00895599 Jy ! Component: 200 - total flux cleaned = 0.00896146 Jy ! Total flux subtracted in 200 components = 0.00896146 Jy ! Clean residual min=-0.004119 max=0.005830 Jy/beam ! Clean residual mean=-0.000017 rms=0.001342 Jy/beam ! Combined flux in latest and established models = 0.140927 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 135 components and 0.140927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097174Jy sigma=0.000957 ! Fit after self-cal, rms=0.097154Jy sigma=0.000957 ! Inverting map ! Added new window around map position (19.5, 40.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253519 Jy ! Component: 100 - total flux cleaned = 0.0036197 Jy ! Component: 150 - total flux cleaned = 0.00388752 Jy ! Component: 200 - total flux cleaned = 0.00413051 Jy ! Total flux subtracted in 200 components = 0.00413051 Jy ! Clean residual min=-0.004248 max=0.004773 Jy/beam ! Clean residual mean=-0.000007 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.145057 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 168 components and 0.145057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096766Jy sigma=0.000953 ! Fit after self-cal, rms=0.096784Jy sigma=0.000952 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096784Jy sigma=0.000952 ! Fit after self-cal, rms=0.094907Jy sigma=0.000948 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.744 mas, bmaj=8.363 mas, bpa=39.25 degrees ! Estimated noise=573.275 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004337 Jy ! Component: 100 - total flux cleaned = 0.00553546 Jy ! Component: 150 - total flux cleaned = 0.00599088 Jy ! Component: 200 - total flux cleaned = 0.00619082 Jy ! Total flux subtracted in 200 components = 0.00619082 Jy ! Clean residual min=-0.003229 max=0.003779 Jy/beam ! Clean residual mean=-0.000004 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.151248 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 189 components and 0.151248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094653Jy sigma=0.000945 ! Fit after self-cal, rms=0.094633Jy sigma=0.000945 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00086358 Jy ! Component: 100 - total flux cleaned = 0.00095269 Jy ! Component: 150 - total flux cleaned = 0.000949921 Jy ! Component: 200 - total flux cleaned = 0.00110721 Jy ! Total flux subtracted in 200 components = 0.00110721 Jy ! Clean residual min=-0.002972 max=0.003488 Jy/beam ! Clean residual mean=-0.000002 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.152355 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 204 components and 0.152355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094518Jy sigma=0.000943 ! Fit after self-cal, rms=0.094526Jy sigma=0.000943 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094526Jy sigma=0.000943 ! Fit after self-cal, rms=0.094840Jy sigma=0.000943 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.105 mas, bmaj=11.86 mas, bpa=25.46 degrees ! Estimated noise=694.749 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257074 Jy ! Component: 100 - total flux cleaned = 0.00343584 Jy ! Component: 150 - total flux cleaned = 0.0036853 Jy ! Component: 200 - total flux cleaned = 0.00398471 Jy ! Total flux subtracted in 200 components = 0.00398471 Jy ! Clean residual min=-0.003641 max=0.004148 Jy/beam ! Clean residual mean=0.000007 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.15634 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 226 components and 0.15634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094752Jy sigma=0.000942 ! Fit after self-cal, rms=0.094737Jy sigma=0.000942 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464602 Jy ! Component: 100 - total flux cleaned = 0.000672948 Jy ! Component: 150 - total flux cleaned = 0.000800717 Jy ! Component: 200 - total flux cleaned = 0.000920676 Jy ! Total flux subtracted in 200 components = 0.000920676 Jy ! Clean residual min=-0.003565 max=0.004088 Jy/beam ! Clean residual mean=0.000009 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.157261 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 250 components and 0.157261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094694Jy sigma=0.000941 ! Fit after self-cal, rms=0.094696Jy sigma=0.000941 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=8.358 mas, bpa=39.17 degrees ! Estimated noise=575.121 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.742 x 8.358 at 39.17 degrees (North through East) ! Clean map min=-0.0061364 max=0.11265 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.85 mas, bmaj=7.68 mas, bpa=41.09 degrees ! Estimated noise=1090.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0824469 Jy ! Component: 100 - total flux cleaned = 0.104693 Jy ! Component: 150 - total flux cleaned = 0.119003 Jy ! Component: 200 - total flux cleaned = 0.130357 Jy ! Total flux subtracted in 200 components = 0.130357 Jy ! Clean residual min=-0.005976 max=0.008432 Jy/beam ! Clean residual mean=-0.000001 rms=0.001869 Jy/beam ! Combined flux in latest and established models = 0.130357 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.130357 Jy ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=8.358 mas, bpa=39.17 degrees ! Estimated noise=575.121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120202 Jy ! Component: 100 - total flux cleaned = 0.0176813 Jy ! Component: 150 - total flux cleaned = 0.0209321 Jy ! Component: 200 - total flux cleaned = 0.0222043 Jy ! Total flux subtracted in 200 components = 0.0222043 Jy ! Clean residual min=-0.005028 max=0.006114 Jy/beam ! Clean residual mean=-0.000004 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.152562 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 63 components and 0.152562 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.105 mas, bmaj=11.86 mas, bpa=25.46 degrees ! Estimated noise=694.749 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387237 Jy ! Component: 100 - total flux cleaned = 0.00472984 Jy ! Component: 150 - total flux cleaned = 0.00510628 Jy ! Component: 200 - total flux cleaned = 0.00545725 Jy ! Total flux subtracted in 200 components = 0.00545725 Jy ! Clean residual min=-0.004920 max=0.006349 Jy/beam ! Clean residual mean=0.000016 rms=0.001631 Jy/beam ! Combined flux in latest and established models = 0.158019 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166113 Jy ! Component: 100 - total flux cleaned = 0.000318928 Jy ! Component: 150 - total flux cleaned = 0.000317845 Jy ! Component: 200 - total flux cleaned = 0.000577123 Jy ! Total flux subtracted in 200 components = 0.000577123 Jy ! Clean residual min=-0.004518 max=0.005565 Jy/beam ! Clean residual mean=0.000017 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 0.158596 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 131 components and 0.158596 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=8.358 mas, bpa=39.17 degrees ! Estimated noise=575.121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000174285 Jy ! Component: 100 - total flux cleaned = -4.69669e-05 Jy ! Component: 150 - total flux cleaned = 7.65987e-05 Jy ! Component: 200 - total flux cleaned = 0.000192115 Jy ! Total flux subtracted in 200 components = 0.000192115 Jy ! Clean residual min=-0.003595 max=0.004015 Jy/beam ! Clean residual mean=0.000004 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.158788 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 165 components and 0.158788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094988Jy sigma=0.000946 ! Fit after self-cal, rms=0.094930Jy sigma=0.000946 wmodel J1306+8008_S_2017_10_21_pus_map.mod ! Writing 165 model components to file: J1306+8008_S_2017_10_21_pus_map.mod wobs J1306+8008_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1306+8008_S_2017_10_21_pus_uvs.fits wwins J1306+8008_S_2017_10_21_pus_map.win ! wwins: Wrote 5 windows to J1306+8008_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152229 Jy ! Component: 100 - total flux cleaned = 0.00241553 Jy ! Component: 150 - total flux cleaned = 0.00313926 Jy ! Component: 200 - total flux cleaned = 0.00371574 Jy ! Component: 250 - total flux cleaned = 0.0043822 Jy ! Component: 300 - total flux cleaned = 0.0049721 Jy ! Component: 350 - total flux cleaned = 0.00554128 Jy ! Component: 400 - total flux cleaned = 0.00604172 Jy ! Component: 450 - total flux cleaned = 0.00643114 Jy ! Component: 500 - total flux cleaned = 0.00680875 Jy ! Component: 550 - total flux cleaned = 0.00699314 Jy ! Component: 600 - total flux cleaned = 0.00717307 Jy ! Component: 650 - total flux cleaned = 0.00721696 Jy ! Component: 700 - total flux cleaned = 0.00734612 Jy ! Component: 750 - total flux cleaned = 0.00743007 Jy ! Component: 800 - total flux cleaned = 0.00759554 Jy ! Component: 850 - total flux cleaned = 0.00775795 Jy ! Component: 900 - total flux cleaned = 0.00771743 Jy ! Component: 950 - total flux cleaned = 0.00779489 Jy ! Component: 1000 - total flux cleaned = 0.00764027 Jy ! Component: 1050 - total flux cleaned = 0.00764058 Jy ! Component: 1100 - total flux cleaned = 0.00764103 Jy ! Component: 1150 - total flux cleaned = 0.00760406 Jy ! Component: 1200 - total flux cleaned = 0.00760419 Jy ! Component: 1250 - total flux cleaned = 0.00756841 Jy ! Component: 1300 - total flux cleaned = 0.00746256 Jy ! Component: 1350 - total flux cleaned = 0.00753201 Jy ! Component: 1400 - total flux cleaned = 0.00746323 Jy ! Component: 1450 - total flux cleaned = 0.00749771 Jy ! Component: 1500 - total flux cleaned = 0.00753142 Jy ! Component: 1550 - total flux cleaned = 0.00749734 Jy ! Component: 1600 - total flux cleaned = 0.00746438 Jy ! Component: 1650 - total flux cleaned = 0.00739893 Jy ! Component: 1700 - total flux cleaned = 0.00733386 Jy ! Component: 1750 - total flux cleaned = 0.0072702 Jy ! Component: 1800 - total flux cleaned = 0.00723882 Jy ! Component: 1850 - total flux cleaned = 0.00720746 Jy ! Component: 1900 - total flux cleaned = 0.00714535 Jy ! Component: 1950 - total flux cleaned = 0.00711466 Jy ! Component: 2000 - total flux cleaned = 0.00708401 Jy ! Component: 2050 - total flux cleaned = 0.00699276 Jy ! Component: 2100 - total flux cleaned = 0.00699298 Jy ! Component: 2150 - total flux cleaned = 0.00705286 Jy ! Component: 2200 - total flux cleaned = 0.00693341 Jy ! Component: 2250 - total flux cleaned = 0.00693349 Jy ! Component: 2300 - total flux cleaned = 0.00690402 Jy ! Component: 2350 - total flux cleaned = 0.00678666 Jy ! Component: 2400 - total flux cleaned = 0.00675764 Jy ! Component: 2450 - total flux cleaned = 0.0067578 Jy ! Component: 2500 - total flux cleaned = 0.00681575 Jy ! Component: 2550 - total flux cleaned = 0.00675815 Jy ! Component: 2600 - total flux cleaned = 0.00687285 Jy ! Component: 2650 - total flux cleaned = 0.00681563 Jy ! Component: 2700 - total flux cleaned = 0.00684414 Jy ! Component: 2750 - total flux cleaned = 0.00687261 Jy ! Component: 2800 - total flux cleaned = 0.00695735 Jy ! Component: 2850 - total flux cleaned = 0.00698565 Jy ! Component: 2900 - total flux cleaned = 0.00704166 Jy ! Component: 2950 - total flux cleaned = 0.00709755 Jy ! Component: 3000 - total flux cleaned = 0.00718142 Jy ! Component: 3050 - total flux cleaned = 0.00718139 Jy ! Component: 3100 - total flux cleaned = 0.00723695 Jy ! Component: 3150 - total flux cleaned = 0.00729252 Jy ! Component: 3200 - total flux cleaned = 0.00740339 Jy ! Component: 3250 - total flux cleaned = 0.007597 Jy ! Component: 3300 - total flux cleaned = 0.00765227 Jy ! Component: 3350 - total flux cleaned = 0.00770746 Jy ! Component: 3400 - total flux cleaned = 0.00779012 Jy ! Component: 3450 - total flux cleaned = 0.00784525 Jy ! Component: 3500 - total flux cleaned = 0.00801026 Jy ! Component: 3550 - total flux cleaned = 0.00806521 Jy ! Component: 3600 - total flux cleaned = 0.00814762 Jy ! Component: 3650 - total flux cleaned = 0.00820254 Jy ! Component: 3700 - total flux cleaned = 0.0082847 Jy ! Component: 3750 - total flux cleaned = 0.00844929 Jy ! Component: 3800 - total flux cleaned = 0.00850409 Jy ! Component: 3850 - total flux cleaned = 0.00858623 Jy ! Component: 3900 - total flux cleaned = 0.00864102 Jy ! Component: 3950 - total flux cleaned = 0.00877786 Jy ! Component: 4000 - total flux cleaned = 0.00877777 Jy ! Component: 4050 - total flux cleaned = 0.00891475 Jy ! Total flux subtracted in 4096 components = 0.00907917 Jy ! Clean residual min=-0.001741 max=0.001652 Jy/beam ! Clean residual mean=-0.000010 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.167867 Jy keep ! Adding 417 model components to the UV plane model. ! The established model now contains 582 components and 0.167867 Jy ![Exited script file: muppet] wmap "J1306+8008_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.742 x 8.358 at 39.17 degrees (North through East) ! Clean map min=-0.0047171 max=0.10794 Jy/beam ! Writing clean map to FITS file: J1306+8008_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107938 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000492679 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.36934 1.36934 2.73868 5.47736 10.9547 21.9094 43.8188 87.6377 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.742 x 8.358 at 39.17 degrees (North through East) ! Clean map min=-0.0047171 max=0.10794 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1306+8008_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:58:35 2019