! Started logfile: J1305-3132_S_2017_02_24_pus_uvs.log on Sat May 4 11:27:36 2019 obs J1305-3132_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1305-3132_S_2017_02_24_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.825778 visibilities/baseline/integration-bin. ! Found source: J1305-3132 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 11148 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1305-3132_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 308 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.922396Jy sigma=0.005840 ! Fit after self-cal, rms=0.907695Jy sigma=0.005765 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.763 mas, bmaj=8.277 mas, bpa=-2.005 degrees ! Estimated noise=1817.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0765633 Jy ! Component: 100 - total flux cleaned = 0.0934518 Jy ! Total flux subtracted in 100 components = 0.0934518 Jy ! Clean residual min=-0.005327 max=0.005744 Jy/beam ! Clean residual mean=0.000004 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.0934518 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0934518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115117Jy sigma=0.000658 ! Fit after self-cal, rms=0.115136Jy sigma=0.000658 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=10.01 mas, bpa=-1.791 degrees ! Estimated noise=1166.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544824 Jy ! Component: 100 - total flux cleaned = 0.00763878 Jy ! Component: 150 - total flux cleaned = 0.00850604 Jy ! Component: 200 - total flux cleaned = 0.00862005 Jy ! Total flux subtracted in 200 components = 0.00862005 Jy ! Clean residual min=-0.003032 max=0.003276 Jy/beam ! Clean residual mean=-0.000013 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.102072 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.102072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114881Jy sigma=0.000656 ! Fit after self-cal, rms=0.114898Jy sigma=0.000656 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 1.09 KP 0.94 ! LA 1.00 MK 1.01 NL 1.03 OV 1.05 ! PT 1.06 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.13 KP 0.96 ! LA 0.93 MK 1.00 NL 0.94 OV 1.07 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 1.06 KP 1.05 ! LA 1.04 MK 1.07 NL 1.12 OV 1.00 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 1.00* ! LA 0.86 MK 0.91 NL 1.00* OV 0.95 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.114898Jy sigma=0.000656 ! Fit after self-cal, rms=0.115496Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=9.993 mas, bpa=-1.594 degrees ! Estimated noise=1170.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145654 Jy ! Component: 100 - total flux cleaned = 7.51156e-05 Jy ! Component: 150 - total flux cleaned = 5.40564e-05 Jy ! Component: 200 - total flux cleaned = 3.49964e-05 Jy ! Total flux subtracted in 200 components = 3.49964e-05 Jy ! Clean residual min=-0.002543 max=0.003465 Jy/beam ! Clean residual mean=-0.000012 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.102107 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.102107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115484Jy sigma=0.000654 ! Fit after self-cal, rms=0.115520Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115520Jy sigma=0.000654 ! Fit after self-cal, rms=0.115904Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=9.981 mas, bpa=-1.458 degrees ! Estimated noise=1171.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130052 Jy ! Component: 100 - total flux cleaned = 9.11482e-05 Jy ! Component: 150 - total flux cleaned = 7.40053e-05 Jy ! Component: 200 - total flux cleaned = 5.76261e-05 Jy ! Total flux subtracted in 200 components = 5.76261e-05 Jy ! Clean residual min=-0.002532 max=0.003411 Jy/beam ! Clean residual mean=-0.000012 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.102164 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.102164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115895Jy sigma=0.000654 ! Fit after self-cal, rms=0.115904Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (53.5, 87.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167653 Jy ! Component: 100 - total flux cleaned = 0.00135957 Jy ! Component: 150 - total flux cleaned = 0.0011351 Jy ! Component: 200 - total flux cleaned = 0.00110208 Jy ! Total flux subtracted in 200 components = 0.00110208 Jy ! Clean residual min=-0.002353 max=0.002549 Jy/beam ! Clean residual mean=-0.000012 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.103267 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 40 components and 0.103267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115811Jy sigma=0.000654 ! Fit after self-cal, rms=0.115780Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115780Jy sigma=0.000654 ! Fit after self-cal, rms=0.115887Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=9.992 mas, bpa=-1.451 degrees ! Estimated noise=1168.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301812 Jy ! Component: 100 - total flux cleaned = 0.000107892 Jy ! Component: 150 - total flux cleaned = 2.03437e-05 Jy ! Component: 200 - total flux cleaned = -3.57951e-05 Jy ! Total flux subtracted in 200 components = -3.57951e-05 Jy ! Clean residual min=-0.002254 max=0.002465 Jy/beam ! Clean residual mean=-0.000005 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.103231 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.103231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115867Jy sigma=0.000653 ! Fit after self-cal, rms=0.115895Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.04325e-06 Jy ! Component: 100 - total flux cleaned = -6.06936e-05 Jy ! Component: 150 - total flux cleaned = -0.000111534 Jy ! Component: 200 - total flux cleaned = -0.000159471 Jy ! Total flux subtracted in 200 components = -0.000159471 Jy ! Clean residual min=-0.002264 max=0.002437 Jy/beam ! Clean residual mean=-0.000005 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.103071 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.103071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115883Jy sigma=0.000653 ! Fit after self-cal, rms=0.115882Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115882Jy sigma=0.000653 ! Fit after self-cal, rms=0.115983Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.523 mas, bmaj=24.11 mas, bpa=-0.6847 degrees ! Estimated noise=1395.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00059485 Jy ! Component: 100 - total flux cleaned = -0.000721474 Jy ! Component: 150 - total flux cleaned = -0.000777757 Jy ! Component: 200 - total flux cleaned = -0.000877894 Jy ! Total flux subtracted in 200 components = -0.000877894 Jy ! Clean residual min=-0.002110 max=0.002990 Jy/beam ! Clean residual mean=-0.000006 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.102193 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.102193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115981Jy sigma=0.000653 ! Fit after self-cal, rms=0.115980Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (124, -114.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209269 Jy ! Component: 100 - total flux cleaned = 0.00214557 Jy ! Component: 150 - total flux cleaned = 0.00199158 Jy ! Component: 200 - total flux cleaned = 0.00188561 Jy ! Total flux subtracted in 200 components = 0.00188561 Jy ! Clean residual min=-0.002144 max=0.002430 Jy/beam ! Clean residual mean=-0.000013 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.104079 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 90 components and 0.104079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115943Jy sigma=0.000652 ! Fit after self-cal, rms=0.115923Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=9.994 mas, bpa=-1.452 degrees ! Estimated noise=1168.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.43 x 9.994 at -1.452 degrees (North through East) ! Clean map min=-0.0026089 max=0.098721 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=8.258 mas, bpa=-1.652 degrees ! Estimated noise=1832.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0771748 Jy ! Component: 100 - total flux cleaned = 0.0943645 Jy ! Component: 150 - total flux cleaned = 0.100654 Jy ! Component: 200 - total flux cleaned = 0.10458 Jy ! Total flux subtracted in 200 components = 0.10458 Jy ! Clean residual min=-0.004393 max=0.003744 Jy/beam ! Clean residual mean=0.000000 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.10458 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.10458 Jy ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=9.994 mas, bpa=-1.452 degrees ! Estimated noise=1168.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597573 Jy ! Component: 100 - total flux cleaned = 0.000852013 Jy ! Component: 150 - total flux cleaned = 0.000780831 Jy ! Component: 200 - total flux cleaned = 0.000844672 Jy ! Total flux subtracted in 200 components = 0.000844672 Jy ! Clean residual min=-0.002389 max=0.002522 Jy/beam ! Clean residual mean=-0.000010 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.105424 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 54 components and 0.105424 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.523 mas, bmaj=24.11 mas, bpa=-0.6847 degrees ! Estimated noise=1395.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268323 Jy ! Component: 100 - total flux cleaned = 0.000379589 Jy ! Component: 150 - total flux cleaned = 0.000282932 Jy ! Component: 200 - total flux cleaned = 0.000153722 Jy ! Total flux subtracted in 200 components = 0.000153722 Jy ! Clean residual min=-0.002111 max=0.002494 Jy/beam ! Clean residual mean=-0.000013 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.105578 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199752 Jy ! Component: 100 - total flux cleaned = -0.000349019 Jy ! Component: 150 - total flux cleaned = -0.000455641 Jy ! Component: 200 - total flux cleaned = -0.000556018 Jy ! Total flux subtracted in 200 components = -0.000556018 Jy ! Clean residual min=-0.002135 max=0.002437 Jy/beam ! Clean residual mean=-0.000010 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.105022 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.105022 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=9.994 mas, bpa=-1.452 degrees ! Estimated noise=1168.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000310997 Jy ! Component: 100 - total flux cleaned = -0.000409875 Jy ! Component: 150 - total flux cleaned = -0.0005403 Jy ! Component: 200 - total flux cleaned = -0.000617921 Jy ! Total flux subtracted in 200 components = -0.000617921 Jy ! Clean residual min=-0.002179 max=0.002510 Jy/beam ! Clean residual mean=-0.000005 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.104404 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 96 components and 0.104404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115866Jy sigma=0.000652 ! Fit after self-cal, rms=0.115854Jy sigma=0.000652 wmodel J1305-3132_S_2017_02_24_pus_map.mod ! Writing 96 model components to file: J1305-3132_S_2017_02_24_pus_map.mod wobs J1305-3132_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1305-3132_S_2017_02_24_pus_uvs.fits wwins J1305-3132_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J1305-3132_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101038 Jy ! Component: 100 - total flux cleaned = 0.00163599 Jy ! Component: 150 - total flux cleaned = 0.00203874 Jy ! Component: 200 - total flux cleaned = 0.00207279 Jy ! Component: 250 - total flux cleaned = 0.00213868 Jy ! Component: 300 - total flux cleaned = 0.0022675 Jy ! Component: 350 - total flux cleaned = 0.00242383 Jy ! Component: 400 - total flux cleaned = 0.00260609 Jy ! Component: 450 - total flux cleaned = 0.00278252 Jy ! Component: 500 - total flux cleaned = 0.00286855 Jy ! Component: 550 - total flux cleaned = 0.00295286 Jy ! Component: 600 - total flux cleaned = 0.0029805 Jy ! Component: 650 - total flux cleaned = 0.00306094 Jy ! Component: 700 - total flux cleaned = 0.00321716 Jy ! Component: 750 - total flux cleaned = 0.00329359 Jy ! Component: 800 - total flux cleaned = 0.00344428 Jy ! Component: 850 - total flux cleaned = 0.00351864 Jy ! Component: 900 - total flux cleaned = 0.0036638 Jy ! Component: 950 - total flux cleaned = 0.00378283 Jy ! Component: 1000 - total flux cleaned = 0.00390043 Jy ! Component: 1050 - total flux cleaned = 0.00406187 Jy ! Component: 1100 - total flux cleaned = 0.00415246 Jy ! Component: 1150 - total flux cleaned = 0.00421947 Jy ! Component: 1200 - total flux cleaned = 0.00426345 Jy ! Component: 1250 - total flux cleaned = 0.00426369 Jy ! Component: 1300 - total flux cleaned = 0.0043498 Jy ! Component: 1350 - total flux cleaned = 0.00439176 Jy ! Component: 1400 - total flux cleaned = 0.00441272 Jy ! Component: 1450 - total flux cleaned = 0.00443375 Jy ! Component: 1500 - total flux cleaned = 0.00453598 Jy ! Component: 1550 - total flux cleaned = 0.00453558 Jy ! Component: 1600 - total flux cleaned = 0.00457556 Jy ! Component: 1650 - total flux cleaned = 0.00463441 Jy ! Component: 1700 - total flux cleaned = 0.004712 Jy ! Component: 1750 - total flux cleaned = 0.00473116 Jy ! Component: 1800 - total flux cleaned = 0.00476903 Jy ! Component: 1850 - total flux cleaned = 0.00480665 Jy ! Component: 1900 - total flux cleaned = 0.00493679 Jy ! Component: 1950 - total flux cleaned = 0.00495554 Jy ! Component: 2000 - total flux cleaned = 0.00502861 Jy ! Component: 2050 - total flux cleaned = 0.00517289 Jy ! Component: 2100 - total flux cleaned = 0.00515479 Jy ! Component: 2150 - total flux cleaned = 0.00522576 Jy ! Component: 2200 - total flux cleaned = 0.00522594 Jy ! Component: 2250 - total flux cleaned = 0.00529558 Jy ! Component: 2300 - total flux cleaned = 0.00531276 Jy ! Component: 2350 - total flux cleaned = 0.00538103 Jy ! Component: 2400 - total flux cleaned = 0.00541483 Jy ! Component: 2450 - total flux cleaned = 0.00546503 Jy ! Component: 2500 - total flux cleaned = 0.00553153 Jy ! Component: 2550 - total flux cleaned = 0.00553144 Jy ! Component: 2600 - total flux cleaned = 0.00561309 Jy ! Component: 2650 - total flux cleaned = 0.00566165 Jy ! Component: 2700 - total flux cleaned = 0.00566137 Jy ! Component: 2750 - total flux cleaned = 0.00570928 Jy ! Component: 2800 - total flux cleaned = 0.00574107 Jy ! Component: 2850 - total flux cleaned = 0.00577252 Jy ! Component: 2900 - total flux cleaned = 0.00586596 Jy ! Component: 2950 - total flux cleaned = 0.00591235 Jy ! Component: 3000 - total flux cleaned = 0.0058815 Jy ! Component: 3050 - total flux cleaned = 0.00594258 Jy ! Component: 3100 - total flux cleaned = 0.00600335 Jy ! Component: 3150 - total flux cleaned = 0.00604847 Jy ! Component: 3200 - total flux cleaned = 0.00610811 Jy ! Component: 3250 - total flux cleaned = 0.00612288 Jy ! Component: 3300 - total flux cleaned = 0.0061081 Jy ! Component: 3350 - total flux cleaned = 0.00613728 Jy ! Component: 3400 - total flux cleaned = 0.00618081 Jy ! Component: 3450 - total flux cleaned = 0.00618074 Jy ! Component: 3500 - total flux cleaned = 0.00620927 Jy ! Component: 3550 - total flux cleaned = 0.00620942 Jy ! Component: 3600 - total flux cleaned = 0.00620943 Jy ! Component: 3650 - total flux cleaned = 0.00615322 Jy ! Component: 3700 - total flux cleaned = 0.00615326 Jy ! Component: 3750 - total flux cleaned = 0.00618112 Jy ! Component: 3800 - total flux cleaned = 0.00611206 Jy ! Component: 3850 - total flux cleaned = 0.00609832 Jy ! Component: 3900 - total flux cleaned = 0.00603025 Jy ! Component: 3950 - total flux cleaned = 0.00607105 Jy ! Component: 4000 - total flux cleaned = 0.00605766 Jy ! Component: 4050 - total flux cleaned = 0.00601745 Jy ! Total flux subtracted in 4096 components = 0.00596411 Jy ! Clean residual min=-0.000786 max=0.000859 Jy/beam ! Clean residual mean=0.000000 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.110368 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 380 components and 0.110368 Jy ![Exited script file: muppet] wmap "J1305-3132_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.43 x 9.994 at -1.452 degrees (North through East) ! Clean map min=-0.0020283 max=0.098556 Jy/beam ! Writing clean map to FITS file: J1305-3132_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0985558 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000251476 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.765484 0.765484 1.53097 3.06194 6.12387 12.2477 24.4955 48.991 97.9819 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.43 x 9.994 at -1.452 degrees (North through East) ! Clean map min=-0.0020283 max=0.098556 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1305-3132_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:27:40 2019