! Started logfile: J1305+7854_S_2017_05_01_pus_uvs.log on Wed May 1 18:37:54 2019 obs J1305+7854_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1305+7854_S_2017_05_01_pus_uva.fits ! AN table 1: 152 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.922515 visibilities/baseline/integration-bin. ! Found source: J1305+7854 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 25240 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1305+7854_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 667 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.806764Jy sigma=0.023124 ! Fit after self-cal, rms=0.800875Jy sigma=0.023094 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=3.722 mas, bpa=-24.8 degrees ! Estimated noise=851.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124027 Jy ! Component: 100 - total flux cleaned = 0.160355 Jy ! Total flux subtracted in 100 components = 0.160355 Jy ! Clean residual min=-0.023346 max=0.026053 Jy/beam ! Clean residual mean=-0.000057 rms=0.008265 Jy/beam ! Combined flux in latest and established models = 0.160355 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.160355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110007Jy sigma=0.003308 ! Fit after self-cal, rms=0.110034Jy sigma=0.003301 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.149 mas, bmaj=4.616 mas, bpa=-36.8 degrees ! Estimated noise=521.332 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020797 Jy ! Component: 100 - total flux cleaned = 0.0272877 Jy ! Component: 150 - total flux cleaned = 0.0275218 Jy ! Component: 200 - total flux cleaned = 0.0281517 Jy ! Total flux subtracted in 200 components = 0.0281517 Jy ! Clean residual min=-0.019329 max=0.023170 Jy/beam ! Clean residual mean=-0.000082 rms=0.006309 Jy/beam ! Combined flux in latest and established models = 0.188507 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.188507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100669Jy sigma=0.003691 ! Fit after self-cal, rms=0.100648Jy sigma=0.003691 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 29.67 FD 0.88 HN 1.03 KP 0.92 ! LA 0.88 MK 0.95 NL 0.87 OV 0.93 ! PT 0.93 SC 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.90 HN 1.00 KP 0.87 ! LA 0.86 MK 0.95 NL 0.88 OV 0.97 ! PT 0.87 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.93 HN 0.98 KP 0.87 ! LA 0.90 MK 0.99 NL 0.88 OV 0.87 ! PT 0.88 SC 0.93 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 0.99 KP 1.00* ! LA 0.90 MK 0.97 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.100648Jy sigma=0.003691 ! Fit after self-cal, rms=1.488286Jy sigma=0.000816 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.099 mas, bmaj=4.477 mas, bpa=-61.53 degrees ! Estimated noise=552.293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116433 Jy ! Component: 100 - total flux cleaned = 0.0116559 Jy ! Component: 150 - total flux cleaned = 0.0114741 Jy ! Component: 200 - total flux cleaned = 0.0114804 Jy ! Total flux subtracted in 200 components = 0.0114804 Jy ! Clean residual min=-0.007140 max=0.004673 Jy/beam ! Clean residual mean=-0.000005 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.199988 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 23 components and 0.199988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.486127Jy sigma=0.000813 ! Fit after self-cal, rms=1.486329Jy sigma=0.000789 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.486329Jy sigma=0.000789 ! Fit after self-cal, rms=0.784346Jy sigma=0.000687 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.113 mas, bmaj=4.413 mas, bpa=-52.56 degrees ! Estimated noise=549.169 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151907 Jy ! Component: 100 - total flux cleaned = 0.00164819 Jy ! Component: 150 - total flux cleaned = 0.00170127 Jy ! Component: 200 - total flux cleaned = 0.00174627 Jy ! Total flux subtracted in 200 components = 0.00174627 Jy ! Clean residual min=-0.003016 max=0.002180 Jy/beam ! Clean residual mean=-0.000004 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.201734 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.201734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.784088Jy sigma=0.000687 ! Fit after self-cal, rms=0.784081Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127604 Jy ! Component: 100 - total flux cleaned = 0.000130673 Jy ! Component: 150 - total flux cleaned = 0.000130901 Jy ! Component: 200 - total flux cleaned = 0.000131869 Jy ! Total flux subtracted in 200 components = 0.000131869 Jy ! Clean residual min=-0.002982 max=0.002073 Jy/beam ! Clean residual mean=-0.000004 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.201866 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.201866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.783998Jy sigma=0.000686 ! Fit after self-cal, rms=0.783997Jy sigma=0.000686 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.783997Jy sigma=0.000686 ! Fit after self-cal, rms=0.803804Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.108 mas, bmaj=4.426 mas, bpa=-56.81 degrees ! Estimated noise=555.412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187019 Jy ! Component: 100 - total flux cleaned = 0.00187072 Jy ! Component: 150 - total flux cleaned = 0.00186946 Jy ! Component: 200 - total flux cleaned = 0.00190514 Jy ! Total flux subtracted in 200 components = 0.00190514 Jy ! Clean residual min=-0.003031 max=0.002131 Jy/beam ! Clean residual mean=-0.000004 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.203771 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.203771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.803554Jy sigma=0.000686 ! Fit after self-cal, rms=0.803554Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.15851e-05 Jy ! Component: 100 - total flux cleaned = 5.97952e-05 Jy ! Component: 150 - total flux cleaned = 3.65204e-05 Jy ! Component: 200 - total flux cleaned = 3.8472e-05 Jy ! Total flux subtracted in 200 components = 3.8472e-05 Jy ! Clean residual min=-0.003003 max=0.002088 Jy/beam ! Clean residual mean=-0.000004 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.203809 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.203809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.803495Jy sigma=0.000686 ! Fit after self-cal, rms=0.803494Jy sigma=0.000686 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.803494Jy sigma=0.000686 ! Fit after self-cal, rms=0.817988Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.83 mas, bmaj=9.481 mas, bpa=-70.88 degrees ! Estimated noise=684.608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191666 Jy ! Component: 100 - total flux cleaned = 0.00203601 Jy ! Component: 150 - total flux cleaned = 0.00209906 Jy ! Component: 200 - total flux cleaned = 0.00215225 Jy ! Total flux subtracted in 200 components = 0.00215225 Jy ! Clean residual min=-0.002777 max=0.002346 Jy/beam ! Clean residual mean=-0.000009 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.205962 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.205962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.817831Jy sigma=0.000686 ! Fit after self-cal, rms=0.817829Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.30089e-06 Jy ! Component: 100 - total flux cleaned = 3.57798e-06 Jy ! Component: 150 - total flux cleaned = 3.0233e-06 Jy ! Component: 200 - total flux cleaned = -3.29606e-05 Jy ! Total flux subtracted in 200 components = -3.29606e-05 Jy ! Clean residual min=-0.002695 max=0.002327 Jy/beam ! Clean residual mean=-0.000009 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.205929 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.205929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.817783Jy sigma=0.000686 ! Fit after self-cal, rms=0.817783Jy sigma=0.000686 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.102 mas, bmaj=4.438 mas, bpa=-60.18 degrees ! Estimated noise=561.607 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.102 x 4.438 at -60.18 degrees (North through East) ! Clean map min=-0.0028242 max=0.18413 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.289 mas, bmaj=3.493 mas, bpa=-67.86 degrees ! Estimated noise=961.399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140894 Jy ! Component: 100 - total flux cleaned = 0.174444 Jy ! Component: 150 - total flux cleaned = 0.187875 Jy ! Component: 200 - total flux cleaned = 0.195319 Jy ! Total flux subtracted in 200 components = 0.195319 Jy ! Clean residual min=-0.003450 max=0.004530 Jy/beam ! Clean residual mean=-0.000012 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.195319 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.195319 Jy ! Inverting map and beam ! Estimated beam: bmin=4.102 mas, bmaj=4.438 mas, bpa=-60.18 degrees ! Estimated noise=561.607 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543474 Jy ! Component: 100 - total flux cleaned = 0.00816702 Jy ! Component: 150 - total flux cleaned = 0.00958408 Jy ! Component: 200 - total flux cleaned = 0.0100262 Jy ! Total flux subtracted in 200 components = 0.0100262 Jy ! Clean residual min=-0.003032 max=0.002250 Jy/beam ! Clean residual mean=-0.000005 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.205345 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.205345 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.83 mas, bmaj=9.481 mas, bpa=-70.88 degrees ! Estimated noise=684.608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275686 Jy ! Component: 100 - total flux cleaned = 0.000272906 Jy ! Component: 150 - total flux cleaned = 0.00032238 Jy ! Component: 200 - total flux cleaned = 0.000367121 Jy ! Total flux subtracted in 200 components = 0.000367121 Jy ! Clean residual min=-0.002663 max=0.002289 Jy/beam ! Clean residual mean=-0.000009 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.205712 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.4084e-05 Jy ! Component: 100 - total flux cleaned = 7.06288e-05 Jy ! Component: 150 - total flux cleaned = 7.10942e-05 Jy ! Component: 200 - total flux cleaned = 6.97546e-05 Jy ! Total flux subtracted in 200 components = 6.97546e-05 Jy ! Clean residual min=-0.002648 max=0.002287 Jy/beam ! Clean residual mean=-0.000009 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.205782 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.205782 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.102 mas, bmaj=4.438 mas, bpa=-60.18 degrees ! Estimated noise=561.607 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144066 Jy ! Component: 100 - total flux cleaned = 0.00011581 Jy ! Component: 150 - total flux cleaned = 6.37513e-05 Jy ! Component: 200 - total flux cleaned = 4.51677e-05 Jy ! Total flux subtracted in 200 components = 4.51677e-05 Jy ! Clean residual min=-0.002962 max=0.002331 Jy/beam ! Clean residual mean=-0.000004 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.205827 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.205827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.817578Jy sigma=0.000686 ! Fit after self-cal, rms=0.817582Jy sigma=0.000686 wmodel J1305+7854_S_2017_05_01_pus_map.mod ! Writing 51 model components to file: J1305+7854_S_2017_05_01_pus_map.mod wobs J1305+7854_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1305+7854_S_2017_05_01_pus_uvs.fits wwins J1305+7854_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1305+7854_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125632 Jy ! Component: 100 - total flux cleaned = -0.00195183 Jy ! Component: 150 - total flux cleaned = -0.00232123 Jy ! Component: 200 - total flux cleaned = -0.002559 Jy ! Component: 250 - total flux cleaned = -0.00282851 Jy ! Component: 300 - total flux cleaned = -0.00297845 Jy ! Component: 350 - total flux cleaned = -0.00312561 Jy ! Component: 400 - total flux cleaned = -0.00316185 Jy ! Component: 450 - total flux cleaned = -0.00337631 Jy ! Component: 500 - total flux cleaned = -0.003482 Jy ! Component: 550 - total flux cleaned = -0.00362091 Jy ! Component: 600 - total flux cleaned = -0.00372368 Jy ! Component: 650 - total flux cleaned = -0.00385866 Jy ! Component: 700 - total flux cleaned = -0.00399182 Jy ! Component: 750 - total flux cleaned = -0.00405719 Jy ! Component: 800 - total flux cleaned = -0.00415469 Jy ! Component: 850 - total flux cleaned = -0.0042194 Jy ! Component: 900 - total flux cleaned = -0.00437887 Jy ! Component: 950 - total flux cleaned = -0.0044101 Jy ! Component: 1000 - total flux cleaned = -0.00450412 Jy ! Component: 1050 - total flux cleaned = -0.00465904 Jy ! Component: 1100 - total flux cleaned = -0.00478176 Jy ! Component: 1150 - total flux cleaned = -0.00478187 Jy ! Component: 1200 - total flux cleaned = -0.0049633 Jy ! Component: 1250 - total flux cleaned = -0.00499326 Jy ! Component: 1300 - total flux cleaned = -0.00514177 Jy ! Component: 1350 - total flux cleaned = -0.00525962 Jy ! Component: 1400 - total flux cleaned = -0.00528877 Jy ! Component: 1450 - total flux cleaned = -0.00540497 Jy ! Component: 1500 - total flux cleaned = -0.00554879 Jy ! Component: 1550 - total flux cleaned = -0.00560578 Jy ! Component: 1600 - total flux cleaned = -0.00566258 Jy ! Component: 1650 - total flux cleaned = -0.00566276 Jy ! Component: 1700 - total flux cleaned = -0.00585887 Jy ! Component: 1750 - total flux cleaned = -0.00594242 Jy ! Component: 1800 - total flux cleaned = -0.00597 Jy ! Component: 1850 - total flux cleaned = -0.00613471 Jy ! Component: 1900 - total flux cleaned = -0.00618922 Jy ! Component: 1950 - total flux cleaned = -0.00637892 Jy ! Component: 2000 - total flux cleaned = -0.00637888 Jy ! Component: 2050 - total flux cleaned = -0.00656629 Jy ! Component: 2100 - total flux cleaned = -0.00659272 Jy ! Component: 2150 - total flux cleaned = -0.00667203 Jy ! Component: 2200 - total flux cleaned = -0.00677734 Jy ! Component: 2250 - total flux cleaned = -0.00682971 Jy ! Component: 2300 - total flux cleaned = -0.00693387 Jy ! Component: 2350 - total flux cleaned = -0.00698548 Jy ! Component: 2400 - total flux cleaned = -0.0070627 Jy ! Component: 2450 - total flux cleaned = -0.00719054 Jy ! Component: 2500 - total flux cleaned = -0.00726691 Jy ! Component: 2550 - total flux cleaned = -0.00729228 Jy ! Component: 2600 - total flux cleaned = -0.00729218 Jy ! Component: 2650 - total flux cleaned = -0.00739251 Jy ! Component: 2700 - total flux cleaned = -0.00741747 Jy ! Component: 2750 - total flux cleaned = -0.00744236 Jy ! Component: 2800 - total flux cleaned = -0.00749164 Jy ! Component: 2850 - total flux cleaned = -0.00756526 Jy ! Component: 2900 - total flux cleaned = -0.00761406 Jy ! Component: 2950 - total flux cleaned = -0.00763831 Jy ! Component: 3000 - total flux cleaned = -0.00763825 Jy ! Component: 3050 - total flux cleaned = -0.00771053 Jy ! Component: 3100 - total flux cleaned = -0.00783022 Jy ! Component: 3150 - total flux cleaned = -0.00787767 Jy ! Component: 3200 - total flux cleaned = -0.00790157 Jy ! Component: 3250 - total flux cleaned = -0.00792518 Jy ! Component: 3300 - total flux cleaned = -0.00801915 Jy ! Component: 3350 - total flux cleaned = -0.00801917 Jy ! Component: 3400 - total flux cleaned = -0.00808895 Jy ! Component: 3450 - total flux cleaned = -0.00813539 Jy ! Component: 3500 - total flux cleaned = -0.00822795 Jy ! Component: 3550 - total flux cleaned = -0.00822812 Jy ! Component: 3600 - total flux cleaned = -0.00829682 Jy ! Component: 3650 - total flux cleaned = -0.00836523 Jy ! Component: 3700 - total flux cleaned = -0.0083198 Jy ! Component: 3750 - total flux cleaned = -0.00836497 Jy ! Component: 3800 - total flux cleaned = -0.00840999 Jy ! Component: 3850 - total flux cleaned = -0.00838754 Jy ! Component: 3900 - total flux cleaned = -0.0084992 Jy ! Component: 3950 - total flux cleaned = -0.00847698 Jy ! Component: 4000 - total flux cleaned = -0.00852132 Jy ! Component: 4050 - total flux cleaned = -0.00847713 Jy ! Total flux subtracted in 4096 components = -0.00860913 Jy ! Clean residual min=-0.001306 max=0.001386 Jy/beam ! Clean residual mean=-0.000004 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.197218 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 379 components and 0.197218 Jy ![Exited script file: muppet] wmap "J1305+7854_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.102 x 4.438 at -60.18 degrees (North through East) ! Clean map min=-0.0027132 max=0.18569 Jy/beam ! Writing clean map to FITS file: J1305+7854_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.185689 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000413952 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.668783 0.668783 1.33757 2.67513 5.35027 10.7005 21.4011 42.8021 85.6043 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.185 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.102 x 4.438 at -60.18 degrees (North through East) ! Clean map min=-0.0027132 max=0.18569 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1305+7854_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:37:59 2019