! Started logfile: J1304-2106_S_2017_05_01_pus_uvs.log on Wed May 1 18:37:49 2019 obs J1304-2106_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1304-2106_S_2017_05_01_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972454 visibilities/baseline/integration-bin. ! Found source: J1304-2106 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 16804 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1304-2106_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 496 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.904909Jy sigma=0.005976 ! Fit after self-cal, rms=0.893397Jy sigma=0.005907 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.508 mas, bmaj=6.622 mas, bpa=-4.285 degrees ! Estimated noise=1533.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.081747 Jy ! Component: 100 - total flux cleaned = 0.104752 Jy ! Total flux subtracted in 100 components = 0.104752 Jy ! Clean residual min=-0.009218 max=0.025492 Jy/beam ! Clean residual mean=-0.000066 rms=0.002827 Jy/beam ! Combined flux in latest and established models = 0.104752 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.104752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117132Jy sigma=0.000751 ! Fit after self-cal, rms=0.117079Jy sigma=0.000750 ! Inverting map ! Added new window around map position (17, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219462 Jy ! Component: 100 - total flux cleaned = 0.0346711 Jy ! Total flux subtracted in 100 components = 0.0346711 Jy ! Clean residual min=-0.007197 max=0.012970 Jy/beam ! Clean residual mean=-0.000048 rms=0.002100 Jy/beam ! Combined flux in latest and established models = 0.139423 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.139423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111762Jy sigma=0.000709 ! Fit after self-cal, rms=0.111384Jy sigma=0.000707 ! Inverting map ! Added new window around map position (4, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130257 Jy ! Component: 100 - total flux cleaned = 0.0218514 Jy ! Total flux subtracted in 100 components = 0.0218514 Jy ! Clean residual min=-0.006503 max=0.008439 Jy/beam ! Clean residual mean=-0.000038 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 0.161275 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 50 components and 0.161275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109216Jy sigma=0.000690 ! Fit after self-cal, rms=0.109100Jy sigma=0.000689 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=7.82 mas, bpa=-3.41 degrees ! Estimated noise=926.931 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124814 Jy ! Component: 100 - total flux cleaned = 0.0215543 Jy ! Component: 150 - total flux cleaned = 0.0283978 Jy ! Component: 200 - total flux cleaned = 0.0336479 Jy ! Total flux subtracted in 200 components = 0.0336479 Jy ! Clean residual min=-0.004641 max=0.006418 Jy/beam ! Clean residual mean=-0.000040 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.194923 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 82 components and 0.194923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107318Jy sigma=0.000675 ! Fit after self-cal, rms=0.107199Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.90 HN 1.12 KP 1.04 ! LA 0.96 MK 0.99 NL 1.01 OV 1.03 ! PT 0.99 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.91 HN 1.39 KP 0.97 ! LA 0.92 MK 1.05 NL 1.00 OV 1.03 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.38 KP 1.00 ! LA 0.93 MK 1.01 NL 1.01 OV 0.96 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.92 KP 1.00* ! LA 1.00* MK 0.90 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.107199Jy sigma=0.000674 ! Fit after self-cal, rms=0.109569Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=7.787 mas, bpa=-2.835 degrees ! Estimated noise=906.424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359205 Jy ! Component: 100 - total flux cleaned = 0.00410249 Jy ! Component: 150 - total flux cleaned = 0.00442619 Jy ! Component: 200 - total flux cleaned = 0.00473416 Jy ! Total flux subtracted in 200 components = 0.00473416 Jy ! Clean residual min=-0.003475 max=0.004894 Jy/beam ! Clean residual mean=-0.000016 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.199657 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 94 components and 0.199657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109408Jy sigma=0.000667 ! Fit after self-cal, rms=0.109477Jy sigma=0.000667 ! Inverting map ! Added new window around map position (34.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463609 Jy ! Component: 100 - total flux cleaned = 0.00703312 Jy ! Component: 150 - total flux cleaned = 0.00880524 Jy ! Component: 200 - total flux cleaned = 0.0102342 Jy ! Total flux subtracted in 200 components = 0.0102342 Jy ! Clean residual min=-0.003007 max=0.003069 Jy/beam ! Clean residual mean=-0.000013 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.209891 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 117 components and 0.209891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109261Jy sigma=0.000665 ! Fit after self-cal, rms=0.109239Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109239Jy sigma=0.000665 ! Fit after self-cal, rms=0.116587Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=7.743 mas, bpa=-2.76 degrees ! Estimated noise=905.576 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015018 Jy ! Component: 100 - total flux cleaned = 0.00219716 Jy ! Component: 150 - total flux cleaned = 0.00265726 Jy ! Component: 200 - total flux cleaned = 0.00286262 Jy ! Total flux subtracted in 200 components = 0.00286262 Jy ! Clean residual min=-0.002336 max=0.002558 Jy/beam ! Clean residual mean=-0.000008 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.212754 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 141 components and 0.212754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116557Jy sigma=0.000663 ! Fit after self-cal, rms=0.116622Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000565904 Jy ! Component: 100 - total flux cleaned = 0.000752157 Jy ! Component: 150 - total flux cleaned = 0.000955594 Jy ! Component: 200 - total flux cleaned = 0.00106451 Jy ! Total flux subtracted in 200 components = 0.00106451 Jy ! Clean residual min=-0.002315 max=0.002497 Jy/beam ! Clean residual mean=-0.000007 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.213818 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 150 components and 0.213818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116607Jy sigma=0.000663 ! Fit after self-cal, rms=0.116605Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116605Jy sigma=0.000663 ! Fit after self-cal, rms=0.119293Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=7.723 mas, bpa=-2.737 degrees ! Estimated noise=902.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.04278e-05 Jy ! Component: 100 - total flux cleaned = 5.64301e-06 Jy ! Component: 150 - total flux cleaned = 0.000111219 Jy ! Component: 200 - total flux cleaned = 0.000185238 Jy ! Total flux subtracted in 200 components = 0.000185238 Jy ! Clean residual min=-0.002252 max=0.002470 Jy/beam ! Clean residual mean=-0.000006 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.214003 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 160 components and 0.214003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119280Jy sigma=0.000663 ! Fit after self-cal, rms=0.119294Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.36851e-05 Jy ! Component: 100 - total flux cleaned = 0.000120657 Jy ! Component: 150 - total flux cleaned = 0.000120695 Jy ! Component: 200 - total flux cleaned = 0.000163568 Jy ! Total flux subtracted in 200 components = 0.000163568 Jy ! Clean residual min=-0.002255 max=0.002426 Jy/beam ! Clean residual mean=-0.000006 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.214167 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 169 components and 0.214167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119284Jy sigma=0.000663 ! Fit after self-cal, rms=0.119283Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119283Jy sigma=0.000663 ! Fit after self-cal, rms=0.119460Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=16.93 mas, bpa=3.323 degrees ! Estimated noise=1110.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151439 Jy ! Component: 100 - total flux cleaned = 0.00242883 Jy ! Component: 150 - total flux cleaned = 0.00282489 Jy ! Component: 200 - total flux cleaned = 0.00287511 Jy ! Total flux subtracted in 200 components = 0.00287511 Jy ! Clean residual min=-0.002314 max=0.003221 Jy/beam ! Clean residual mean=-0.000005 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.217042 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 176 components and 0.217042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119468Jy sigma=0.000663 ! Fit after self-cal, rms=0.119464Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000529402 Jy ! Component: 100 - total flux cleaned = 0.000605674 Jy ! Component: 150 - total flux cleaned = 0.000653203 Jy ! Component: 200 - total flux cleaned = 0.000697857 Jy ! Total flux subtracted in 200 components = 0.000697857 Jy ! Clean residual min=-0.002352 max=0.003169 Jy/beam ! Clean residual mean=-0.000004 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.21774 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 178 components and 0.21774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119470Jy sigma=0.000663 ! Fit after self-cal, rms=0.119467Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.718 mas, bpa=-2.662 degrees ! Estimated noise=901.035 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 7.718 at -2.662 degrees (North through East) ! Clean map min=-0.0020686 max=0.10995 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.529 mas, bmaj=6.496 mas, bpa=-3.516 degrees ! Estimated noise=1504.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0796854 Jy ! Component: 100 - total flux cleaned = 0.109363 Jy ! Component: 150 - total flux cleaned = 0.128375 Jy ! Component: 200 - total flux cleaned = 0.14187 Jy ! Total flux subtracted in 200 components = 0.14187 Jy ! Clean residual min=-0.005620 max=0.007890 Jy/beam ! Clean residual mean=-0.000036 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.14187 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.14187 Jy ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.718 mas, bpa=-2.662 degrees ! Estimated noise=901.035 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154533 Jy ! Component: 100 - total flux cleaned = 0.0263866 Jy ! Component: 150 - total flux cleaned = 0.0344423 Jy ! Component: 200 - total flux cleaned = 0.0405406 Jy ! Total flux subtracted in 200 components = 0.0405406 Jy ! Clean residual min=-0.003553 max=0.004399 Jy/beam ! Clean residual mean=-0.000028 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.182411 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 88 components and 0.182411 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=16.93 mas, bpa=3.323 degrees ! Estimated noise=1110.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00853103 Jy ! Component: 100 - total flux cleaned = 0.0144022 Jy ! Component: 150 - total flux cleaned = 0.018763 Jy ! Component: 200 - total flux cleaned = 0.0221248 Jy ! Total flux subtracted in 200 components = 0.0221248 Jy ! Clean residual min=-0.003193 max=0.003646 Jy/beam ! Clean residual mean=-0.000022 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.204536 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266227 Jy ! Component: 100 - total flux cleaned = 0.00481235 Jy ! Component: 150 - total flux cleaned = 0.00655683 Jy ! Component: 200 - total flux cleaned = 0.0079744 Jy ! Total flux subtracted in 200 components = 0.0079744 Jy ! Clean residual min=-0.002671 max=0.003103 Jy/beam ! Clean residual mean=-0.000012 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.21251 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 166 components and 0.21251 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.718 mas, bpa=-2.662 degrees ! Estimated noise=901.035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171245 Jy ! Component: 100 - total flux cleaned = 4.4531e-05 Jy ! Component: 150 - total flux cleaned = 0.000345619 Jy ! Component: 200 - total flux cleaned = 0.000558867 Jy ! Total flux subtracted in 200 components = 0.000558867 Jy ! Clean residual min=-0.002222 max=0.002442 Jy/beam ! Clean residual mean=-0.000006 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.213069 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 180 components and 0.213069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119555Jy sigma=0.000663 ! Fit after self-cal, rms=0.119515Jy sigma=0.000663 wmodel J1304-2106_S_2017_05_01_pus_map.mod ! Writing 180 model components to file: J1304-2106_S_2017_05_01_pus_map.mod wobs J1304-2106_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1304-2106_S_2017_05_01_pus_uvs.fits wwins J1304-2106_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J1304-2106_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695447 Jy ! Component: 100 - total flux cleaned = 0.00126067 Jy ! Component: 150 - total flux cleaned = 0.00168189 Jy ! Component: 200 - total flux cleaned = 0.0020136 Jy ! Component: 250 - total flux cleaned = 0.00251058 Jy ! Component: 300 - total flux cleaned = 0.00275101 Jy ! Component: 350 - total flux cleaned = 0.00301869 Jy ! Component: 400 - total flux cleaned = 0.00318179 Jy ! Component: 450 - total flux cleaned = 0.00327789 Jy ! Component: 500 - total flux cleaned = 0.00349622 Jy ! Component: 550 - total flux cleaned = 0.00373923 Jy ! Component: 600 - total flux cleaned = 0.00388761 Jy ! Component: 650 - total flux cleaned = 0.00406274 Jy ! Component: 700 - total flux cleaned = 0.00412055 Jy ! Component: 750 - total flux cleaned = 0.00423304 Jy ! Component: 800 - total flux cleaned = 0.00431571 Jy ! Component: 850 - total flux cleaned = 0.00439662 Jy ! Component: 900 - total flux cleaned = 0.00450342 Jy ! Component: 950 - total flux cleaned = 0.00460814 Jy ! Component: 1000 - total flux cleaned = 0.00468609 Jy ! Component: 1050 - total flux cleaned = 0.00473764 Jy ! Component: 1100 - total flux cleaned = 0.00496379 Jy ! Component: 1150 - total flux cleaned = 0.00491429 Jy ! Component: 1200 - total flux cleaned = 0.00510992 Jy ! Component: 1250 - total flux cleaned = 0.00525324 Jy ! Component: 1300 - total flux cleaned = 0.00518237 Jy ! Component: 1350 - total flux cleaned = 0.00522951 Jy ! Component: 1400 - total flux cleaned = 0.0052753 Jy ! Component: 1450 - total flux cleaned = 0.0052069 Jy ! Component: 1500 - total flux cleaned = 0.00529666 Jy ! Component: 1550 - total flux cleaned = 0.00525217 Jy ! Component: 1600 - total flux cleaned = 0.00533953 Jy ! Component: 1650 - total flux cleaned = 0.00523085 Jy ! Component: 1700 - total flux cleaned = 0.00529532 Jy ! Component: 1750 - total flux cleaned = 0.00525284 Jy ! Component: 1800 - total flux cleaned = 0.00527374 Jy ! Component: 1850 - total flux cleaned = 0.00525306 Jy ! Component: 1900 - total flux cleaned = 0.00527354 Jy ! Component: 1950 - total flux cleaned = 0.00525304 Jy ! Component: 2000 - total flux cleaned = 0.00539347 Jy ! Component: 2050 - total flux cleaned = 0.00531366 Jy ! Component: 2100 - total flux cleaned = 0.00527415 Jy ! Component: 2150 - total flux cleaned = 0.00519612 Jy ! Component: 2200 - total flux cleaned = 0.00523474 Jy ! Component: 2250 - total flux cleaned = 0.00527257 Jy ! Component: 2300 - total flux cleaned = 0.00521589 Jy ! Component: 2350 - total flux cleaned = 0.00525311 Jy ! Component: 2400 - total flux cleaned = 0.00521614 Jy ! Component: 2450 - total flux cleaned = 0.00521613 Jy ! Component: 2500 - total flux cleaned = 0.00527096 Jy ! Component: 2550 - total flux cleaned = 0.00525295 Jy ! Component: 2600 - total flux cleaned = 0.00521707 Jy ! Component: 2650 - total flux cleaned = 0.00527046 Jy ! Component: 2700 - total flux cleaned = 0.0052353 Jy ! Component: 2750 - total flux cleaned = 0.00525288 Jy ! Component: 2800 - total flux cleaned = 0.00521848 Jy ! Component: 2850 - total flux cleaned = 0.00516723 Jy ! Component: 2900 - total flux cleaned = 0.00521794 Jy ! Component: 2950 - total flux cleaned = 0.00520121 Jy ! Component: 3000 - total flux cleaned = 0.00520112 Jy ! Component: 3050 - total flux cleaned = 0.00525096 Jy ! Component: 3100 - total flux cleaned = 0.0051687 Jy ! Component: 3150 - total flux cleaned = 0.00525033 Jy ! Component: 3200 - total flux cleaned = 0.00521811 Jy ! Component: 3250 - total flux cleaned = 0.00526648 Jy ! Component: 3300 - total flux cleaned = 0.00529833 Jy ! Component: 3350 - total flux cleaned = 0.0052823 Jy ! Component: 3400 - total flux cleaned = 0.0052508 Jy ! Component: 3450 - total flux cleaned = 0.00523528 Jy ! Component: 3500 - total flux cleaned = 0.00525069 Jy ! Component: 3550 - total flux cleaned = 0.00521987 Jy ! Component: 3600 - total flux cleaned = 0.00520457 Jy ! Component: 3650 - total flux cleaned = 0.00517439 Jy ! Component: 3700 - total flux cleaned = 0.00518937 Jy ! Component: 3750 - total flux cleaned = 0.00517416 Jy ! Component: 3800 - total flux cleaned = 0.00514441 Jy ! Component: 3850 - total flux cleaned = 0.00508566 Jy ! Component: 3900 - total flux cleaned = 0.00508577 Jy ! Component: 3950 - total flux cleaned = 0.00511488 Jy ! Component: 4000 - total flux cleaned = 0.00508608 Jy ! Component: 4050 - total flux cleaned = 0.00508609 Jy ! Total flux subtracted in 4096 components = 0.00507179 Jy ! Clean residual min=-0.001044 max=0.000776 Jy/beam ! Clean residual mean=-0.000004 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.218141 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 485 components and 0.218141 Jy ![Exited script file: muppet] wmap "J1304-2106_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 7.718 at -2.662 degrees (North through East) ! Clean map min=-0.0015584 max=0.10993 Jy/beam ! Writing clean map to FITS file: J1304-2106_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.109933 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259946 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.709375 0.709375 1.41875 2.8375 5.675 11.35 22.7 45.4 90.7999 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.109 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 7.718 at -2.662 degrees (North through East) ! Clean map min=-0.0015584 max=0.10993 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1304-2106_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:37:54 2019