! Started logfile: J1304+6353_S_2017_05_27_pus_uvs.log on Fri May 3 11:07:17 2019 obs J1304+6353_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1304+6353_S_2017_05_27_pus_uva.fits ! AN table 1: 232 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969923 visibilities/baseline/integration-bin. ! Found source: J1304+6353 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 40504 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1304+6353_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1221 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938027Jy sigma=0.019978 ! Fit after self-cal, rms=0.923008Jy sigma=0.019909 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=3.946 mas, bpa=-29.13 degrees ! Estimated noise=715.738 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0492954 Jy ! Component: 100 - total flux cleaned = 0.0643573 Jy ! Total flux subtracted in 100 components = 0.0643573 Jy ! Clean residual min=-0.007531 max=0.012276 Jy/beam ! Clean residual mean=-0.000015 rms=0.002521 Jy/beam ! Combined flux in latest and established models = 0.0643573 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0643573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101529Jy sigma=0.001213 ! Fit after self-cal, rms=0.101465Jy sigma=0.001212 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.068 mas, bmaj=4.928 mas, bpa=-24.65 degrees ! Estimated noise=382.531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143976 Jy ! Component: 100 - total flux cleaned = 0.0235539 Jy ! Component: 150 - total flux cleaned = 0.0286807 Jy ! Component: 200 - total flux cleaned = 0.0315851 Jy ! Total flux subtracted in 200 components = 0.0315851 Jy ! Clean residual min=-0.006002 max=0.008571 Jy/beam ! Clean residual mean=-0.000016 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.0959424 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 44 components and 0.0959424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099420Jy sigma=0.001049 ! Fit after self-cal, rms=0.098936Jy sigma=0.001046 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.86 HN 0.89 KP 0.95 ! LA 0.94 MK 0.91 NL 0.72 OV 0.94 ! PT 1.00 SC 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.90 HN 0.98 KP 0.92 ! LA 0.95 MK 0.96 NL 8.10 OV 0.96 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.93 HN 1.00 KP 0.92 ! LA 0.96 MK 0.97 NL 0.81 OV 0.91 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.88 KP 1.00* ! LA 1.03 MK 0.84 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.098936Jy sigma=0.001046 ! Fit after self-cal, rms=0.225152Jy sigma=0.000699 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.122 mas, bmaj=4.557 mas, bpa=-15.38 degrees ! Estimated noise=412.576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111592 Jy ! Component: 100 - total flux cleaned = 0.00137955 Jy ! Component: 150 - total flux cleaned = 0.00159892 Jy ! Component: 200 - total flux cleaned = 0.00187532 Jy ! Total flux subtracted in 200 components = 0.00187532 Jy ! Clean residual min=-0.002349 max=0.002613 Jy/beam ! Clean residual mean=-0.000008 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.0978177 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 73 components and 0.0978177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224299Jy sigma=0.000698 ! Fit after self-cal, rms=0.224596Jy sigma=0.000690 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224596Jy sigma=0.000690 ! Fit after self-cal, rms=0.101943Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.147 mas, bmaj=4.564 mas, bpa=-14.17 degrees ! Estimated noise=406.212 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000644186 Jy ! Component: 100 - total flux cleaned = -0.000533904 Jy ! Component: 150 - total flux cleaned = -0.00043889 Jy ! Component: 200 - total flux cleaned = -0.000395332 Jy ! Total flux subtracted in 200 components = -0.000395332 Jy ! Clean residual min=-0.001264 max=0.001389 Jy/beam ! Clean residual mean=-0.000002 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.0974223 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.0974224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101828Jy sigma=0.000670 ! Fit after self-cal, rms=0.101739Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 24.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108386 Jy ! Component: 100 - total flux cleaned = 0.00125451 Jy ! Component: 150 - total flux cleaned = 0.00136643 Jy ! Component: 200 - total flux cleaned = 0.0014673 Jy ! Total flux subtracted in 200 components = 0.0014673 Jy ! Clean residual min=-0.001194 max=0.001333 Jy/beam ! Clean residual mean=-0.000001 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.0988896 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 101 components and 0.0988896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101676Jy sigma=0.000668 ! Fit after self-cal, rms=0.101675Jy sigma=0.000668 ! Inverting map ! Added new window around map position (68.5, 27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000958375 Jy ! Component: 100 - total flux cleaned = 0.0011267 Jy ! Component: 150 - total flux cleaned = 0.00112647 Jy ! Component: 200 - total flux cleaned = 0.00112684 Jy ! Total flux subtracted in 200 components = 0.00112684 Jy ! Clean residual min=-0.001130 max=0.001185 Jy/beam ! Clean residual mean=-0.000001 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.100016 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 115 components and 0.100016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101640Jy sigma=0.000668 ! Fit after self-cal, rms=0.101640Jy sigma=0.000668 ! Inverting map ! Added new window around map position (4, -68.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000492127 Jy ! Component: 100 - total flux cleaned = 0.000716178 Jy ! Component: 150 - total flux cleaned = 0.000716148 Jy ! Component: 200 - total flux cleaned = 0.000770276 Jy ! Total flux subtracted in 200 components = 0.000770276 Jy ! Clean residual min=-0.001104 max=0.001056 Jy/beam ! Clean residual mean=-0.000000 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.100787 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 130 components and 0.100787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101611Jy sigma=0.000668 ! Fit after self-cal, rms=0.101612Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101612Jy sigma=0.000668 ! Fit after self-cal, rms=0.106876Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.153 mas, bmaj=4.534 mas, bpa=-13.85 degrees ! Estimated noise=407.585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.11396e-05 Jy ! Component: 100 - total flux cleaned = 9.36052e-06 Jy ! Component: 150 - total flux cleaned = 9.90206e-05 Jy ! Component: 200 - total flux cleaned = 0.000182708 Jy ! Total flux subtracted in 200 components = 0.000182708 Jy ! Clean residual min=-0.001075 max=0.001125 Jy/beam ! Clean residual mean=0.000000 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.100969 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 138 components and 0.100969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106813Jy sigma=0.000667 ! Fit after self-cal, rms=0.106812Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (65, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000732978 Jy ! Component: 100 - total flux cleaned = 0.000865679 Jy ! Component: 150 - total flux cleaned = 0.000989087 Jy ! Component: 200 - total flux cleaned = 0.00101201 Jy ! Total flux subtracted in 200 components = 0.00101201 Jy ! Clean residual min=-0.001036 max=0.000965 Jy/beam ! Clean residual mean=-0.000000 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.101982 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 148 components and 0.101982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106774Jy sigma=0.000667 ! Fit after self-cal, rms=0.106774Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106774Jy sigma=0.000667 ! Fit after self-cal, rms=0.109253Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.347 mas, bmaj=8.851 mas, bpa=73.37 degrees ! Estimated noise=511.484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000512354 Jy ! Component: 100 - total flux cleaned = 0.000537552 Jy ! Component: 150 - total flux cleaned = 0.000495118 Jy ! Component: 200 - total flux cleaned = 0.000439127 Jy ! Total flux subtracted in 200 components = 0.000439127 Jy ! Clean residual min=-0.001095 max=0.001037 Jy/beam ! Clean residual mean=0.000000 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.102421 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 169 components and 0.102421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109209Jy sigma=0.000667 ! Fit after self-cal, rms=0.109207Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.95311e-05 Jy ! Component: 100 - total flux cleaned = 1.06106e-05 Jy ! Component: 150 - total flux cleaned = -5.47395e-05 Jy ! Component: 200 - total flux cleaned = -0.000100473 Jy ! Total flux subtracted in 200 components = -0.000100473 Jy ! Clean residual min=-0.001085 max=0.001029 Jy/beam ! Clean residual mean=0.000000 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.10232 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 184 components and 0.10232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109185Jy sigma=0.000667 ! Fit after self-cal, rms=0.109184Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.151 mas, bmaj=4.522 mas, bpa=-13.56 degrees ! Estimated noise=409.218 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.151 x 4.522 at -13.56 degrees (North through East) ! Clean map min=-0.00096905 max=0.067368 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=3.595 mas, bpa=-29.09 degrees ! Estimated noise=742.221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0514242 Jy ! Component: 100 - total flux cleaned = 0.0684254 Jy ! Component: 150 - total flux cleaned = 0.0767332 Jy ! Component: 200 - total flux cleaned = 0.0815763 Jy ! Total flux subtracted in 200 components = 0.0815763 Jy ! Clean residual min=-0.002397 max=0.002689 Jy/beam ! Clean residual mean=-0.000006 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0815763 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0815763 Jy ! Inverting map and beam ! Estimated beam: bmin=4.151 mas, bmaj=4.522 mas, bpa=-13.56 degrees ! Estimated noise=409.218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502793 Jy ! Component: 100 - total flux cleaned = 0.00827809 Jy ! Component: 150 - total flux cleaned = 0.0105255 Jy ! Component: 200 - total flux cleaned = 0.0123062 Jy ! Total flux subtracted in 200 components = 0.0123062 Jy ! Clean residual min=-0.001127 max=0.001444 Jy/beam ! Clean residual mean=-0.000007 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.0938825 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 73 components and 0.0938825 Jy ! Inverting map ! Added new window around map position (2, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160962 Jy ! Component: 100 - total flux cleaned = 0.0029452 Jy ! Component: 150 - total flux cleaned = 0.00410406 Jy ! Component: 200 - total flux cleaned = 0.00491954 Jy ! Total flux subtracted in 200 components = 0.00491954 Jy ! Clean residual min=-0.001032 max=0.001167 Jy/beam ! Clean residual mean=-0.000003 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.0988021 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 103 components and 0.0988021 Jy ! Inverting map ! Added new window around map position (10.5, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000833581 Jy ! Component: 100 - total flux cleaned = 0.00138941 Jy ! Component: 150 - total flux cleaned = 0.00177384 Jy ! Component: 200 - total flux cleaned = 0.00209951 Jy ! Total flux subtracted in 200 components = 0.00209951 Jy ! Clean residual min=-0.001030 max=0.000895 Jy/beam ! Clean residual mean=-0.000001 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.100902 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 122 components and 0.100902 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.347 mas, bmaj=8.851 mas, bpa=73.37 degrees ! Estimated noise=511.484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571752 Jy ! Component: 100 - total flux cleaned = 0.000776695 Jy ! Component: 150 - total flux cleaned = 0.000881511 Jy ! Component: 200 - total flux cleaned = 0.000936372 Jy ! Total flux subtracted in 200 components = 0.000936372 Jy ! Clean residual min=-0.000987 max=0.000942 Jy/beam ! Clean residual mean=-0.000000 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.101838 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.00318e-05 Jy ! Component: 100 - total flux cleaned = 0.000113688 Jy ! Component: 150 - total flux cleaned = 0.000188507 Jy ! Component: 200 - total flux cleaned = 0.000257926 Jy ! Total flux subtracted in 200 components = 0.000257926 Jy ! Clean residual min=-0.000976 max=0.000930 Jy/beam ! Clean residual mean=0.000000 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.102096 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 187 components and 0.102096 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.151 mas, bmaj=4.522 mas, bpa=-13.56 degrees ! Estimated noise=409.218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.24855e-05 Jy ! Component: 100 - total flux cleaned = 5.38442e-05 Jy ! Component: 150 - total flux cleaned = 9.66883e-05 Jy ! Component: 200 - total flux cleaned = 9.54993e-05 Jy ! Total flux subtracted in 200 components = 9.54993e-05 Jy ! Clean residual min=-0.000951 max=0.000845 Jy/beam ! Clean residual mean=0.000000 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.102191 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 207 components and 0.102191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109078Jy sigma=0.000667 ! Fit after self-cal, rms=0.109068Jy sigma=0.000667 wmodel J1304+6353_S_2017_05_27_pus_map.mod ! Writing 207 model components to file: J1304+6353_S_2017_05_27_pus_map.mod wobs J1304+6353_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1304+6353_S_2017_05_27_pus_uvs.fits wwins J1304+6353_S_2017_05_27_pus_map.win ! wwins: Wrote 8 windows to J1304+6353_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102878 Jy ! Component: 100 - total flux cleaned = -5.59011e-05 Jy ! Component: 150 - total flux cleaned = 6.46226e-05 Jy ! Component: 200 - total flux cleaned = 0.000225057 Jy ! Component: 250 - total flux cleaned = 0.000395806 Jy ! Component: 300 - total flux cleaned = 0.000549029 Jy ! Component: 350 - total flux cleaned = 0.000671927 Jy ! Component: 400 - total flux cleaned = 0.000752499 Jy ! Component: 450 - total flux cleaned = 0.00081886 Jy ! Component: 500 - total flux cleaned = 0.000871211 Jy ! Component: 550 - total flux cleaned = 0.000897339 Jy ! Component: 600 - total flux cleaned = 0.000961505 Jy ! Component: 650 - total flux cleaned = 0.00103729 Jy ! Component: 700 - total flux cleaned = 0.00104989 Jy ! Component: 750 - total flux cleaned = 0.00108716 Jy ! Component: 800 - total flux cleaned = 0.00111182 Jy ! Component: 850 - total flux cleaned = 0.001148 Jy ! Component: 900 - total flux cleaned = 0.00118379 Jy ! Component: 950 - total flux cleaned = 0.00118375 Jy ! Component: 1000 - total flux cleaned = 0.00121887 Jy ! Component: 1050 - total flux cleaned = 0.00119594 Jy ! Component: 1100 - total flux cleaned = 0.00125348 Jy ! Component: 1150 - total flux cleaned = 0.0012307 Jy ! Component: 1200 - total flux cleaned = 0.00126461 Jy ! Component: 1250 - total flux cleaned = 0.00127563 Jy ! Component: 1300 - total flux cleaned = 0.00127544 Jy ! Component: 1350 - total flux cleaned = 0.00129737 Jy ! Component: 1400 - total flux cleaned = 0.00127551 Jy ! Component: 1450 - total flux cleaned = 0.00125401 Jy ! Component: 1500 - total flux cleaned = 0.001297 Jy ! Component: 1550 - total flux cleaned = 0.00135039 Jy ! Component: 1600 - total flux cleaned = 0.00138216 Jy ! Component: 1650 - total flux cleaned = 0.00136105 Jy ! Component: 1700 - total flux cleaned = 0.00143415 Jy ! Component: 1750 - total flux cleaned = 0.00142383 Jy ! Component: 1800 - total flux cleaned = 0.00146501 Jy ! Component: 1850 - total flux cleaned = 0.00146496 Jy ! Component: 1900 - total flux cleaned = 0.00154618 Jy ! Component: 1950 - total flux cleaned = 0.00157628 Jy ! Component: 2000 - total flux cleaned = 0.00158622 Jy ! Component: 2050 - total flux cleaned = 0.00158613 Jy ! Component: 2100 - total flux cleaned = 0.00157627 Jy ! Component: 2150 - total flux cleaned = 0.00161551 Jy ! Component: 2200 - total flux cleaned = 0.00163506 Jy ! Component: 2250 - total flux cleaned = 0.00166434 Jy ! Component: 2300 - total flux cleaned = 0.00169327 Jy ! Component: 2350 - total flux cleaned = 0.00173175 Jy ! Component: 2400 - total flux cleaned = 0.00174139 Jy ! Component: 2450 - total flux cleaned = 0.0018078 Jy ! Component: 2500 - total flux cleaned = 0.00177945 Jy ! Component: 2550 - total flux cleaned = 0.00191068 Jy ! Component: 2600 - total flux cleaned = 0.00186397 Jy ! Component: 2650 - total flux cleaned = 0.00186397 Jy ! Component: 2700 - total flux cleaned = 0.00191933 Jy ! Component: 2750 - total flux cleaned = 0.00194686 Jy ! Component: 2800 - total flux cleaned = 0.00199244 Jy ! Component: 2850 - total flux cleaned = 0.00199246 Jy ! Component: 2900 - total flux cleaned = 0.00208266 Jy ! Component: 2950 - total flux cleaned = 0.00211853 Jy ! Component: 3000 - total flux cleaned = 0.0021364 Jy ! Component: 3050 - total flux cleaned = 0.00213628 Jy ! Component: 3100 - total flux cleaned = 0.00218041 Jy ! Component: 3150 - total flux cleaned = 0.00219804 Jy ! Component: 3200 - total flux cleaned = 0.00220677 Jy ! Component: 3250 - total flux cleaned = 0.00225889 Jy ! Component: 3300 - total flux cleaned = 0.00229353 Jy ! Component: 3350 - total flux cleaned = 0.00232808 Jy ! Component: 3400 - total flux cleaned = 0.00237099 Jy ! Component: 3450 - total flux cleaned = 0.00240518 Jy ! Component: 3500 - total flux cleaned = 0.00243921 Jy ! Component: 3550 - total flux cleaned = 0.00251538 Jy ! Component: 3600 - total flux cleaned = 0.0025491 Jy ! Component: 3650 - total flux cleaned = 0.00259939 Jy ! Component: 3700 - total flux cleaned = 0.00262446 Jy ! Component: 3750 - total flux cleaned = 0.00269093 Jy ! Component: 3800 - total flux cleaned = 0.00270746 Jy ! Component: 3850 - total flux cleaned = 0.00273219 Jy ! Component: 3900 - total flux cleaned = 0.00283056 Jy ! Component: 3950 - total flux cleaned = 0.00284686 Jy ! Component: 4000 - total flux cleaned = 0.00284691 Jy ! Component: 4050 - total flux cleaned = 0.00289556 Jy ! Total flux subtracted in 4096 components = 0.00294393 Jy ! Clean residual min=-0.000485 max=0.000558 Jy/beam ! Clean residual mean=0.000000 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.105135 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 506 components and 0.105135 Jy ![Exited script file: muppet] wmap "J1304+6353_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.151 x 4.522 at -13.56 degrees (North through East) ! Clean map min=-0.00076942 max=0.067674 Jy/beam ! Writing clean map to FITS file: J1304+6353_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0676744 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000146388 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.648937 0.648937 1.29787 2.59575 5.1915 10.383 20.766 41.532 83.0639 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.151 x 4.522 at -13.56 degrees (North through East) ! Clean map min=-0.00076942 max=0.067674 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1304+6353_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:07:24 2019