! Started logfile: J1302+5748_S_2017_07_16_pus_uvs.log on Thu May 9 11:09:12 2019 obs J1302+5748_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1302+5748_S_2017_07_16_pus_uva.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.696296 visibilities/baseline/integration-bin. ! Found source: J1302+5748 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 1128 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1302+5748_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.461454Jy sigma=0.004341 ! Fit after self-cal, rms=0.448745Jy sigma=0.004227 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.584 mas, bmaj=10.19 mas, bpa=-45.63 degrees ! Estimated noise=3278.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.435321 Jy ! Component: 100 - total flux cleaned = 0.530883 Jy ! Total flux subtracted in 100 components = 0.530883 Jy ! Clean residual min=-0.020071 max=0.031618 Jy/beam ! Clean residual mean=0.000052 rms=0.006850 Jy/beam ! Combined flux in latest and established models = 0.530883 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.530883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104069Jy sigma=0.000932 ! Fit after self-cal, rms=0.104054Jy sigma=0.000932 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=10.64 mas, bpa=-45.27 degrees ! Estimated noise=2580.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334658 Jy ! Component: 100 - total flux cleaned = 0.0467818 Jy ! Component: 150 - total flux cleaned = 0.0499603 Jy ! Component: 200 - total flux cleaned = 0.0510064 Jy ! Total flux subtracted in 200 components = 0.0510064 Jy ! Clean residual min=-0.012121 max=0.014294 Jy/beam ! Clean residual mean=0.000039 rms=0.003350 Jy/beam ! Combined flux in latest and established models = 0.581889 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 0.581889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092319Jy sigma=0.000826 ! Fit after self-cal, rms=0.092279Jy sigma=0.000825 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.96 KP 1.03 ! LA 1.03 MK 0.98 NL 0.89 OV 0.99 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 1.00 KP 0.97 ! LA 0.98 MK 0.99 NL 1.04 OV 1.15 ! PT 0.98 SC 1.26 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 0.99 KP 0.98 ! LA 0.99 MK 1.02 NL 0.99 OV 0.96 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.092279Jy sigma=0.000825 ! Fit after self-cal, rms=0.077659Jy sigma=0.000686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=10.65 mas, bpa=-45.04 degrees ! Estimated noise=2585.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00460437 Jy ! Component: 100 - total flux cleaned = 0.00611522 Jy ! Component: 150 - total flux cleaned = 0.00667933 Jy ! Component: 200 - total flux cleaned = 0.00728512 Jy ! Total flux subtracted in 200 components = 0.00728512 Jy ! Clean residual min=-0.006060 max=0.006034 Jy/beam ! Clean residual mean=0.000024 rms=0.001569 Jy/beam ! Combined flux in latest and established models = 0.589174 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 0.589174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077301Jy sigma=0.000682 ! Fit after self-cal, rms=0.077310Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077310Jy sigma=0.000682 ! Fit after self-cal, rms=0.077433Jy sigma=0.000682 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=10.64 mas, bpa=-45.08 degrees ! Estimated noise=2586.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274139 Jy ! Component: 100 - total flux cleaned = 0.00359591 Jy ! Component: 150 - total flux cleaned = 0.0041186 Jy ! Component: 200 - total flux cleaned = 0.00465355 Jy ! Total flux subtracted in 200 components = 0.00465355 Jy ! Clean residual min=-0.005685 max=0.005582 Jy/beam ! Clean residual mean=0.000020 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.593827 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.593827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077314Jy sigma=0.000680 ! Fit after self-cal, rms=0.077308Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.03047e-05 Jy ! Component: 100 - total flux cleaned = 0.000404703 Jy ! Component: 150 - total flux cleaned = 0.000692622 Jy ! Component: 200 - total flux cleaned = 0.000854311 Jy ! Total flux subtracted in 200 components = 0.000854311 Jy ! Clean residual min=-0.005536 max=0.005407 Jy/beam ! Clean residual mean=0.000019 rms=0.001452 Jy/beam ! Combined flux in latest and established models = 0.594682 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.594682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077273Jy sigma=0.000680 ! Fit after self-cal, rms=0.077270Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077270Jy sigma=0.000680 ! Fit after self-cal, rms=0.077380Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=10.64 mas, bpa=-45.1 degrees ! Estimated noise=2588.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016223 Jy ! Component: 100 - total flux cleaned = 0.0023604 Jy ! Component: 150 - total flux cleaned = 0.00269904 Jy ! Component: 200 - total flux cleaned = 0.00294713 Jy ! Total flux subtracted in 200 components = 0.00294713 Jy ! Clean residual min=-0.005324 max=0.005321 Jy/beam ! Clean residual mean=0.000017 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.597629 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.597629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077342Jy sigma=0.000679 ! Fit after self-cal, rms=0.077340Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213765 Jy ! Component: 100 - total flux cleaned = 0.000308166 Jy ! Component: 150 - total flux cleaned = 0.000440186 Jy ! Component: 200 - total flux cleaned = 0.000542142 Jy ! Total flux subtracted in 200 components = 0.000542142 Jy ! Clean residual min=-0.005258 max=0.005250 Jy/beam ! Clean residual mean=0.000016 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.598171 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 75 components and 0.598171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077327Jy sigma=0.000679 ! Fit after self-cal, rms=0.077326Jy sigma=0.000679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077326Jy sigma=0.000679 ! Fit after self-cal, rms=0.077388Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.924 mas, bmaj=10.95 mas, bpa=-50.76 degrees ! Estimated noise=3219.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144849 Jy ! Component: 100 - total flux cleaned = 0.0018911 Jy ! Component: 150 - total flux cleaned = 0.00215239 Jy ! Component: 200 - total flux cleaned = 0.00231624 Jy ! Total flux subtracted in 200 components = 0.00231624 Jy ! Clean residual min=-0.005385 max=0.006390 Jy/beam ! Clean residual mean=0.000034 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.600487 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 90 components and 0.600487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077389Jy sigma=0.000679 ! Fit after self-cal, rms=0.077389Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.09678e-05 Jy ! Component: 100 - total flux cleaned = 0.000126443 Jy ! Component: 150 - total flux cleaned = 0.000177331 Jy ! Component: 200 - total flux cleaned = 0.000225002 Jy ! Total flux subtracted in 200 components = 0.000225002 Jy ! Clean residual min=-0.005317 max=0.006275 Jy/beam ! Clean residual mean=0.000033 rms=0.001577 Jy/beam ! Combined flux in latest and established models = 0.600712 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 100 components and 0.600712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077390Jy sigma=0.000679 ! Fit after self-cal, rms=0.077389Jy sigma=0.000679 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=10.63 mas, bpa=-45.11 degrees ! Estimated noise=2589.76 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.065 x 10.63 at -45.11 degrees (North through East) ! Clean map min=-0.0049292 max=0.55588 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077389Jy sigma=0.000679 ! Fit after self-cal, rms=0.070228Jy sigma=0.000616 ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=10.63 mas, bpa=-45.11 degrees ! Estimated noise=2589.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016579 Jy ! Component: 100 - total flux cleaned = -3.1479e-05 Jy ! Component: 150 - total flux cleaned = -2.39465e-06 Jy ! Component: 200 - total flux cleaned = 5.12607e-05 Jy ! Total flux subtracted in 200 components = 5.12607e-05 Jy ! Clean residual min=-0.005108 max=0.005142 Jy/beam ! Clean residual mean=0.000011 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.600764 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.600763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070198Jy sigma=0.000616 ! Fit after self-cal, rms=0.070196Jy sigma=0.000616 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.15779e-06 Jy ! Component: 100 - total flux cleaned = 0.000103297 Jy ! Component: 150 - total flux cleaned = 0.000143631 Jy ! Component: 200 - total flux cleaned = 0.000198561 Jy ! Total flux subtracted in 200 components = 0.000198561 Jy ! Clean residual min=-0.005087 max=0.005144 Jy/beam ! Clean residual mean=0.000011 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.600962 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 110 components and 0.600962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070181Jy sigma=0.000615 ! Fit after self-cal, rms=0.070179Jy sigma=0.000615 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070179Jy sigma=0.000615 ! Fit after self-cal, rms=0.070220Jy sigma=0.000615 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.592 mas, bmaj=10.36 mas, bpa=-45.28 degrees ! Estimated noise=3278.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.431656 Jy ! Component: 100 - total flux cleaned = 0.526137 Jy ! Component: 150 - total flux cleaned = 0.553343 Jy ! Component: 200 - total flux cleaned = 0.567867 Jy ! Total flux subtracted in 200 components = 0.567867 Jy ! Clean residual min=-0.009302 max=0.009787 Jy/beam ! Clean residual mean=0.000028 rms=0.002593 Jy/beam ! Combined flux in latest and established models = 0.567866 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.567866 Jy ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=10.63 mas, bpa=-45.11 degrees ! Estimated noise=2590.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113775 Jy ! Component: 100 - total flux cleaned = 0.0181254 Jy ! Component: 150 - total flux cleaned = 0.0225547 Jy ! Component: 200 - total flux cleaned = 0.0257555 Jy ! Total flux subtracted in 200 components = 0.0257555 Jy ! Clean residual min=-0.006048 max=0.005766 Jy/beam ! Clean residual mean=0.000025 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.593622 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 55 components and 0.593622 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.923 mas, bmaj=10.95 mas, bpa=-50.77 degrees ! Estimated noise=3218.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388088 Jy ! Component: 100 - total flux cleaned = 0.00604662 Jy ! Component: 150 - total flux cleaned = 0.0073571 Jy ! Component: 200 - total flux cleaned = 0.00803731 Jy ! Total flux subtracted in 200 components = 0.00803731 Jy ! Clean residual min=-0.005009 max=0.005912 Jy/beam ! Clean residual mean=0.000023 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 0.601659 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222189 Jy ! Component: 100 - total flux cleaned = 0.00038318 Jy ! Component: 150 - total flux cleaned = 0.000517238 Jy ! Component: 200 - total flux cleaned = 0.00057659 Jy ! Total flux subtracted in 200 components = 0.00057659 Jy ! Clean residual min=-0.004900 max=0.005969 Jy/beam ! Clean residual mean=0.000021 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 0.602236 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 96 components and 0.602236 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=10.63 mas, bpa=-45.11 degrees ! Estimated noise=2590.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100389 Jy ! Component: 100 - total flux cleaned = -1.13366e-05 Jy ! Component: 150 - total flux cleaned = -5.58719e-05 Jy ! Component: 200 - total flux cleaned = -5.46803e-05 Jy ! Total flux subtracted in 200 components = -5.46803e-05 Jy ! Clean residual min=-0.005532 max=0.005254 Jy/beam ! Clean residual mean=0.000009 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 0.602181 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 111 components and 0.602181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070290Jy sigma=0.000616 ! Fit after self-cal, rms=0.070285Jy sigma=0.000616 wmodel J1302+5748_S_2017_07_16_pus_map.mod ! Writing 111 model components to file: J1302+5748_S_2017_07_16_pus_map.mod wobs J1302+5748_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1302+5748_S_2017_07_16_pus_uvs.fits wwins J1302+5748_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J1302+5748_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126636 Jy ! Component: 100 - total flux cleaned = 0.000371314 Jy ! Component: 150 - total flux cleaned = 0.000298081 Jy ! Component: 200 - total flux cleaned = 0.000224387 Jy ! Component: 250 - total flux cleaned = 0.000291887 Jy ! Component: 300 - total flux cleaned = 0.000490278 Jy ! Component: 350 - total flux cleaned = 0.000489091 Jy ! Component: 400 - total flux cleaned = 0.000426305 Jy ! Component: 450 - total flux cleaned = 0.00025112 Jy ! Component: 500 - total flux cleaned = 2.68024e-05 Jy ! Component: 550 - total flux cleaned = 2.70943e-05 Jy ! Component: 600 - total flux cleaned = 2.63125e-05 Jy ! Component: 650 - total flux cleaned = -0.000128271 Jy ! Component: 700 - total flux cleaned = -0.000128417 Jy ! Component: 750 - total flux cleaned = -0.000178486 Jy ! Component: 800 - total flux cleaned = -0.000323076 Jy ! Component: 850 - total flux cleaned = -0.000228468 Jy ! Component: 900 - total flux cleaned = -0.000415224 Jy ! Component: 950 - total flux cleaned = -0.000370222 Jy ! Component: 1000 - total flux cleaned = -0.000416244 Jy ! Component: 1050 - total flux cleaned = -0.000372364 Jy ! Component: 1100 - total flux cleaned = -0.000243203 Jy ! Component: 1150 - total flux cleaned = -7.39715e-05 Jy ! Component: 1200 - total flux cleaned = -7.35542e-05 Jy ! Component: 1250 - total flux cleaned = 0.000172965 Jy ! Component: 1300 - total flux cleaned = 0.00033389 Jy ! Component: 1350 - total flux cleaned = 0.000214336 Jy ! Component: 1400 - total flux cleaned = 0.000214948 Jy ! Component: 1450 - total flux cleaned = 0.000215764 Jy ! Component: 1500 - total flux cleaned = 0.000291886 Jy ! Component: 1550 - total flux cleaned = 0.00025431 Jy ! Component: 1600 - total flux cleaned = 0.000291309 Jy ! Component: 1650 - total flux cleaned = 0.000327429 Jy ! Component: 1700 - total flux cleaned = 0.000291287 Jy ! Component: 1750 - total flux cleaned = 0.000362984 Jy ! Component: 1800 - total flux cleaned = 0.00039848 Jy ! Component: 1850 - total flux cleaned = 0.000398273 Jy ! Component: 1900 - total flux cleaned = 0.000398586 Jy ! Component: 1950 - total flux cleaned = 0.000432593 Jy ! Component: 2000 - total flux cleaned = 0.000263411 Jy ! Component: 2050 - total flux cleaned = 0.000398002 Jy ! Component: 2100 - total flux cleaned = 0.000298394 Jy ! Component: 2150 - total flux cleaned = 0.000265505 Jy ! Component: 2200 - total flux cleaned = 0.000200347 Jy ! Component: 2250 - total flux cleaned = 0.000167589 Jy ! Component: 2300 - total flux cleaned = -2.51315e-05 Jy ! Component: 2350 - total flux cleaned = -8.85844e-05 Jy ! Component: 2400 - total flux cleaned = -0.000183092 Jy ! Component: 2450 - total flux cleaned = -0.000120171 Jy ! Component: 2500 - total flux cleaned = -0.000213962 Jy ! Component: 2550 - total flux cleaned = -0.000244949 Jy ! Component: 2600 - total flux cleaned = -0.000275869 Jy ! Component: 2650 - total flux cleaned = -0.000275774 Jy ! Component: 2700 - total flux cleaned = -0.00030597 Jy ! Component: 2750 - total flux cleaned = -0.000336027 Jy ! Component: 2800 - total flux cleaned = -0.000425852 Jy ! Component: 2850 - total flux cleaned = -0.000425725 Jy ! Component: 2900 - total flux cleaned = -0.000455224 Jy ! Component: 2950 - total flux cleaned = -0.000484529 Jy ! Component: 3000 - total flux cleaned = -0.000543044 Jy ! Component: 3050 - total flux cleaned = -0.00054331 Jy ! Component: 3100 - total flux cleaned = -0.000572082 Jy ! Component: 3150 - total flux cleaned = -0.000572166 Jy ! Component: 3200 - total flux cleaned = -0.000543614 Jy ! Component: 3250 - total flux cleaned = -0.000600809 Jy ! Component: 3300 - total flux cleaned = -0.000629068 Jy ! Component: 3350 - total flux cleaned = -0.000629141 Jy ! Component: 3400 - total flux cleaned = -0.000629317 Jy ! Component: 3450 - total flux cleaned = -0.000685287 Jy ! Component: 3500 - total flux cleaned = -0.00065729 Jy ! Component: 3550 - total flux cleaned = -0.000685076 Jy ! Component: 3600 - total flux cleaned = -0.000712678 Jy ! Component: 3650 - total flux cleaned = -0.000767693 Jy ! Component: 3700 - total flux cleaned = -0.000794901 Jy ! Component: 3750 - total flux cleaned = -0.000876736 Jy ! Component: 3800 - total flux cleaned = -0.000849376 Jy ! Component: 3850 - total flux cleaned = -0.000903624 Jy ! Component: 3900 - total flux cleaned = -0.00101206 Jy ! Component: 3950 - total flux cleaned = -0.00103907 Jy ! Component: 4000 - total flux cleaned = -0.00111981 Jy ! Component: 4050 - total flux cleaned = -0.00114675 Jy ! Total flux subtracted in 4096 components = -0.00122716 Jy ! Clean residual min=-0.001598 max=0.001735 Jy/beam ! Clean residual mean=-0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.600954 Jy keep ! Adding 235 model components to the UV plane model. ! The established model now contains 346 components and 0.600954 Jy ![Exited script file: muppet] wmap "J1302+5748_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.067 x 10.63 at -45.11 degrees (North through East) ! Clean map min=-0.0034011 max=0.55485 Jy/beam ! Writing clean map to FITS file: J1302+5748_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.554851 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000458891 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.248116 0.248116 0.496231 0.992462 1.98492 3.96985 7.9397 15.8794 31.7588 63.5176 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.554 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.067 x 10.63 at -45.11 degrees (North through East) ! Clean map min=-0.0034011 max=0.55485 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1302+5748_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:09:17 2019