! Started logfile: J1302+5748_S_2017_01_21_pus_uvs.log on Sun May 5 15:54:55 2019 obs J1302+5748_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1302+5748_S_2017_01_21_pus_uva.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.662037 visibilities/baseline/integration-bin. ! Found source: J1302+5748 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 2288 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1302+5748_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.524615Jy sigma=0.004139 ! Fit after self-cal, rms=0.520859Jy sigma=0.004110 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=3.848 mas, bpa=0.004027 degrees ! Estimated noise=2509.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.394124 Jy ! Component: 100 - total flux cleaned = 0.480069 Jy ! Total flux subtracted in 100 components = 0.480069 Jy ! Clean residual min=-0.018827 max=0.031434 Jy/beam ! Clean residual mean=-0.000044 rms=0.005569 Jy/beam ! Combined flux in latest and established models = 0.480069 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.480069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139927Jy sigma=0.001041 ! Fit after self-cal, rms=0.139925Jy sigma=0.001041 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.592 mas, bmaj=4.344 mas, bpa=5.966 degrees ! Estimated noise=1986.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309199 Jy ! Component: 100 - total flux cleaned = 0.0410445 Jy ! Component: 150 - total flux cleaned = 0.0450408 Jy ! Component: 200 - total flux cleaned = 0.0469539 Jy ! Total flux subtracted in 200 components = 0.0469539 Jy ! Clean residual min=-0.014004 max=0.022553 Jy/beam ! Clean residual mean=-0.000059 rms=0.004337 Jy/beam ! Combined flux in latest and established models = 0.527022 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.527022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130587Jy sigma=0.000974 ! Fit after self-cal, rms=0.130117Jy sigma=0.000970 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.39 LA 1.02 ! MK 0.94 NL 0.96 OV 1.00 PT 0.99 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.95 LA 0.98 ! MK 0.95 NL 0.96 OV 1.04 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.96 LA 0.99 ! MK 0.97 NL 0.96 OV 0.95 PT 0.95 ! SC 0.97 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 0.96 LA 1.09 ! MK 1.01 NL 1.00* OV 0.99 PT 0.97 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.130117Jy sigma=0.000970 ! Fit after self-cal, rms=0.131619Jy sigma=0.000884 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=4.31 mas, bpa=6.315 degrees ! Estimated noise=1945.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00074415 Jy ! Component: 100 - total flux cleaned = 1.93061e-05 Jy ! Component: 150 - total flux cleaned = 0.00102424 Jy ! Component: 200 - total flux cleaned = 0.00193368 Jy ! Total flux subtracted in 200 components = 0.00193368 Jy ! Clean residual min=-0.014206 max=0.012965 Jy/beam ! Clean residual mean=-0.000054 rms=0.003524 Jy/beam ! Combined flux in latest and established models = 0.528956 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 52 components and 0.528956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128251Jy sigma=0.000875 ! Fit after self-cal, rms=0.128264Jy sigma=0.000874 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128264Jy sigma=0.000874 ! Fit after self-cal, rms=0.130649Jy sigma=0.000690 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.555 mas, bmaj=4.31 mas, bpa=8.627 degrees ! Estimated noise=1968.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0019108 Jy ! Component: 100 - total flux cleaned = -0.00244161 Jy ! Component: 150 - total flux cleaned = -0.0031821 Jy ! Component: 200 - total flux cleaned = -0.00395001 Jy ! Total flux subtracted in 200 components = -0.00395001 Jy ! Clean residual min=-0.006075 max=0.006122 Jy/beam ! Clean residual mean=0.000001 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.525006 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.525006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130194Jy sigma=0.000684 ! Fit after self-cal, rms=0.130482Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (44.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044682 Jy ! Component: 100 - total flux cleaned = 0.00496626 Jy ! Component: 150 - total flux cleaned = 0.00517779 Jy ! Component: 200 - total flux cleaned = 0.00556797 Jy ! Total flux subtracted in 200 components = 0.00556797 Jy ! Clean residual min=-0.005684 max=0.005067 Jy/beam ! Clean residual mean=-0.000012 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.530574 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 0.530574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130151Jy sigma=0.000681 ! Fit after self-cal, rms=0.130132Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130132Jy sigma=0.000681 ! Fit after self-cal, rms=0.132003Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=4.306 mas, bpa=8.86 degrees ! Estimated noise=1964.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000456945 Jy ! Component: 100 - total flux cleaned = -0.000572311 Jy ! Component: 150 - total flux cleaned = -0.000576486 Jy ! Component: 200 - total flux cleaned = -0.000496342 Jy ! Total flux subtracted in 200 components = -0.000496342 Jy ! Clean residual min=-0.005153 max=0.004922 Jy/beam ! Clean residual mean=-0.000005 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.530078 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 95 components and 0.530077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131835Jy sigma=0.000678 ! Fit after self-cal, rms=0.131836Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210846 Jy ! Component: 100 - total flux cleaned = -0.000138679 Jy ! Component: 150 - total flux cleaned = -5.13537e-07 Jy ! Component: 200 - total flux cleaned = 0.000196167 Jy ! Total flux subtracted in 200 components = 0.000196167 Jy ! Clean residual min=-0.005012 max=0.004760 Jy/beam ! Clean residual mean=-0.000006 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.530274 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 104 components and 0.530273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131768Jy sigma=0.000677 ! Fit after self-cal, rms=0.131761Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131761Jy sigma=0.000677 ! Fit after self-cal, rms=0.132893Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.287 mas, bmaj=8.23 mas, bpa=34.45 degrees ! Estimated noise=2582.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000570899 Jy ! Component: 100 - total flux cleaned = -0.000262101 Jy ! Component: 150 - total flux cleaned = 1.05492e-06 Jy ! Component: 200 - total flux cleaned = 0.000335054 Jy ! Total flux subtracted in 200 components = 0.000335054 Jy ! Clean residual min=-0.005578 max=0.005370 Jy/beam ! Clean residual mean=0.000002 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.530608 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 114 components and 0.530608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132863Jy sigma=0.000676 ! Fit after self-cal, rms=0.132861Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.85469e-05 Jy ! Component: 100 - total flux cleaned = 0.000136457 Jy ! Component: 150 - total flux cleaned = 0.000347625 Jy ! Component: 200 - total flux cleaned = 0.00057159 Jy ! Total flux subtracted in 200 components = 0.00057159 Jy ! Clean residual min=-0.005524 max=0.005414 Jy/beam ! Clean residual mean=0.000001 rms=0.001566 Jy/beam ! Combined flux in latest and established models = 0.53118 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 124 components and 0.53118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132864Jy sigma=0.000676 ! Fit after self-cal, rms=0.132862Jy sigma=0.000676 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=4.301 mas, bpa=8.887 degrees ! Estimated noise=1961.82 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.547 x 4.301 at 8.887 degrees (North through East) ! Clean map min=-0.0070071 max=0.49229 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.001 mas, bmaj=3.801 mas, bpa=2.775 degrees ! Estimated noise=2485.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.389758 Jy ! Component: 100 - total flux cleaned = 0.474751 Jy ! Component: 150 - total flux cleaned = 0.495767 Jy ! Component: 200 - total flux cleaned = 0.506004 Jy ! Total flux subtracted in 200 components = 0.506004 Jy ! Clean residual min=-0.007927 max=0.007341 Jy/beam ! Clean residual mean=-0.000002 rms=0.001704 Jy/beam ! Combined flux in latest and established models = 0.506004 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.506004 Jy ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=4.301 mas, bpa=8.887 degrees ! Estimated noise=1961.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00761282 Jy ! Component: 100 - total flux cleaned = 0.0126105 Jy ! Component: 150 - total flux cleaned = 0.015659 Jy ! Component: 200 - total flux cleaned = 0.0171463 Jy ! Total flux subtracted in 200 components = 0.0171463 Jy ! Clean residual min=-0.005483 max=0.004867 Jy/beam ! Clean residual mean=0.000003 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.523151 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 32 components and 0.523151 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.287 mas, bmaj=8.23 mas, bpa=34.45 degrees ! Estimated noise=2582.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375001 Jy ! Component: 100 - total flux cleaned = 0.0052504 Jy ! Component: 150 - total flux cleaned = 0.00622389 Jy ! Component: 200 - total flux cleaned = 0.0065304 Jy ! Total flux subtracted in 200 components = 0.0065304 Jy ! Clean residual min=-0.005926 max=0.005043 Jy/beam ! Clean residual mean=0.000008 rms=0.001571 Jy/beam ! Combined flux in latest and established models = 0.529681 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215225 Jy ! Component: 100 - total flux cleaned = 0.000410369 Jy ! Component: 150 - total flux cleaned = 0.000530821 Jy ! Component: 200 - total flux cleaned = 0.000643464 Jy ! Total flux subtracted in 200 components = 0.000643464 Jy ! Clean residual min=-0.005749 max=0.004997 Jy/beam ! Clean residual mean=0.000005 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.530325 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 58 components and 0.530325 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.547 mas, bmaj=4.301 mas, bpa=8.887 degrees ! Estimated noise=1961.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000394182 Jy ! Component: 100 - total flux cleaned = -0.000295924 Jy ! Component: 150 - total flux cleaned = -0.00021396 Jy ! Component: 200 - total flux cleaned = 1.16134e-05 Jy ! Total flux subtracted in 200 components = 1.16134e-05 Jy ! Clean residual min=-0.005142 max=0.004731 Jy/beam ! Clean residual mean=0.000001 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.530336 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 0.530336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133299Jy sigma=0.000676 ! Fit after self-cal, rms=0.133207Jy sigma=0.000675 wmodel J1302+5748_S_2017_01_21_pus_map.mod ! Writing 76 model components to file: J1302+5748_S_2017_01_21_pus_map.mod wobs J1302+5748_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1302+5748_S_2017_01_21_pus_uvs.fits wwins J1302+5748_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J1302+5748_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000756556 Jy ! Component: 100 - total flux cleaned = -0.00107919 Jy ! Component: 150 - total flux cleaned = -0.00160879 Jy ! Component: 200 - total flux cleaned = -0.0019721 Jy ! Component: 250 - total flux cleaned = -0.00225491 Jy ! Component: 300 - total flux cleaned = -0.00225439 Jy ! Component: 350 - total flux cleaned = -0.00225408 Jy ! Component: 400 - total flux cleaned = -0.00231869 Jy ! Component: 450 - total flux cleaned = -0.00218815 Jy ! Component: 500 - total flux cleaned = -0.00218746 Jy ! Component: 550 - total flux cleaned = -0.00206466 Jy ! Component: 600 - total flux cleaned = -0.00200519 Jy ! Component: 650 - total flux cleaned = -0.00194611 Jy ! Component: 700 - total flux cleaned = -0.00183033 Jy ! Component: 750 - total flux cleaned = -0.0018313 Jy ! Component: 800 - total flux cleaned = -0.00188735 Jy ! Component: 850 - total flux cleaned = -0.00183135 Jy ! Component: 900 - total flux cleaned = -0.00172333 Jy ! Component: 950 - total flux cleaned = -0.00183164 Jy ! Component: 1000 - total flux cleaned = -0.00193715 Jy ! Component: 1050 - total flux cleaned = -0.0019365 Jy ! Component: 1100 - total flux cleaned = -0.00178204 Jy ! Component: 1150 - total flux cleaned = -0.00188331 Jy ! Component: 1200 - total flux cleaned = -0.0016827 Jy ! Component: 1250 - total flux cleaned = -0.00163389 Jy ! Component: 1300 - total flux cleaned = -0.00148763 Jy ! Component: 1350 - total flux cleaned = -0.00148711 Jy ! Component: 1400 - total flux cleaned = -0.00129526 Jy ! Component: 1450 - total flux cleaned = -0.00115393 Jy ! Component: 1500 - total flux cleaned = -0.00106129 Jy ! Component: 1550 - total flux cleaned = -0.00101487 Jy ! Component: 1600 - total flux cleaned = -0.000878079 Jy ! Component: 1650 - total flux cleaned = -0.000787949 Jy ! Component: 1700 - total flux cleaned = -0.000698325 Jy ! Component: 1750 - total flux cleaned = -0.000610291 Jy ! Component: 1800 - total flux cleaned = -0.000566502 Jy ! Component: 1850 - total flux cleaned = -0.000523145 Jy ! Component: 1900 - total flux cleaned = -0.000479801 Jy ! Component: 1950 - total flux cleaned = -0.000266591 Jy ! Component: 2000 - total flux cleaned = -0.000182551 Jy ! Component: 2050 - total flux cleaned = -5.71765e-05 Jy ! Component: 2100 - total flux cleaned = -5.72421e-05 Jy ! Component: 2150 - total flux cleaned = 0.000148901 Jy ! Component: 2200 - total flux cleaned = 0.000271216 Jy ! Component: 2250 - total flux cleaned = 0.00035178 Jy ! Component: 2300 - total flux cleaned = 0.00039194 Jy ! Component: 2350 - total flux cleaned = 0.000511378 Jy ! Component: 2400 - total flux cleaned = 0.000748562 Jy ! Component: 2450 - total flux cleaned = 0.000905321 Jy ! Component: 2500 - total flux cleaned = 0.00102209 Jy ! Component: 2550 - total flux cleaned = 0.00113837 Jy ! Component: 2600 - total flux cleaned = 0.0014066 Jy ! Component: 2650 - total flux cleaned = 0.00152073 Jy ! Component: 2700 - total flux cleaned = 0.00159602 Jy ! Component: 2750 - total flux cleaned = 0.00185864 Jy ! Component: 2800 - total flux cleaned = 0.00185853 Jy ! Component: 2850 - total flux cleaned = 0.00219145 Jy ! Component: 2900 - total flux cleaned = 0.00222825 Jy ! Component: 2950 - total flux cleaned = 0.00230166 Jy ! Component: 3000 - total flux cleaned = 0.00251963 Jy ! Component: 3050 - total flux cleaned = 0.0025915 Jy ! Component: 3100 - total flux cleaned = 0.0028423 Jy ! Component: 3150 - total flux cleaned = 0.00301993 Jy ! Component: 3200 - total flux cleaned = 0.00301961 Jy ! Component: 3250 - total flux cleaned = 0.00316053 Jy ! Component: 3300 - total flux cleaned = 0.00340493 Jy ! Component: 3350 - total flux cleaned = 0.00337071 Jy ! Component: 3400 - total flux cleaned = 0.00371578 Jy ! Component: 3450 - total flux cleaned = 0.00378417 Jy ! Component: 3500 - total flux cleaned = 0.0038864 Jy ! Component: 3550 - total flux cleaned = 0.00402195 Jy ! Component: 3600 - total flux cleaned = 0.00402209 Jy ! Component: 3650 - total flux cleaned = 0.00415627 Jy ! Component: 3700 - total flux cleaned = 0.00428931 Jy ! Component: 3750 - total flux cleaned = 0.00445453 Jy ! Component: 3800 - total flux cleaned = 0.00458608 Jy ! Component: 3850 - total flux cleaned = 0.00465171 Jy ! Component: 3900 - total flux cleaned = 0.00478188 Jy ! Component: 3950 - total flux cleaned = 0.0049436 Jy ! Component: 4000 - total flux cleaned = 0.00507221 Jy ! Component: 4050 - total flux cleaned = 0.00516807 Jy ! Total flux subtracted in 4096 components = 0.00529553 Jy ! Clean residual min=-0.001758 max=0.001868 Jy/beam ! Clean residual mean=0.000009 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.535632 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 365 components and 0.535632 Jy ![Exited script file: muppet] wmap "J1302+5748_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.547 x 4.301 at 8.887 degrees (North through East) ! Clean map min=-0.0038859 max=0.49514 Jy/beam ! Writing clean map to FITS file: J1302+5748_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.495138 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000561072 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.339949 0.339949 0.679898 1.3598 2.71959 5.43919 10.8784 21.7567 43.5135 87.027 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.495 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.547 x 4.301 at 8.887 degrees (North through East) ! Clean map min=-0.0038859 max=0.49514 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1302+5748_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:55:00 2019