! Started logfile: J1301+4634_S_2017_06_15_pus_uvs.log on Tue May 7 15:18:37 2019 obs J1301+4634_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1301+4634_S_2017_06_15_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.837037 visibilities/baseline/integration-bin. ! Found source: J1301+4634 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 12656 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1301+4634_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 496 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.906293Jy sigma=0.008672 ! Fit after self-cal, rms=0.899446Jy sigma=0.008618 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=5.527 mas, bpa=12.88 degrees ! Estimated noise=1036.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0803744 Jy ! Component: 100 - total flux cleaned = 0.0979239 Jy ! Total flux subtracted in 100 components = 0.0979239 Jy ! Clean residual min=-0.003240 max=0.004980 Jy/beam ! Clean residual mean=-0.000004 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.0979239 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0979239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076059Jy sigma=0.000666 ! Fit after self-cal, rms=0.076051Jy sigma=0.000666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=6.245 mas, bpa=13.89 degrees ! Estimated noise=749.539 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502681 Jy ! Component: 100 - total flux cleaned = 0.00708183 Jy ! Component: 150 - total flux cleaned = 0.0081346 Jy ! Component: 200 - total flux cleaned = 0.00827108 Jy ! Total flux subtracted in 200 components = 0.00827108 Jy ! Clean residual min=-0.002564 max=0.003043 Jy/beam ! Clean residual mean=-0.000006 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.106195 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 24 components and 0.106195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075751Jy sigma=0.000663 ! Fit after self-cal, rms=0.075753Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.97 KP 1.00 ! LA 1.02 MK 1.05 NL 0.97 OV 1.02 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 1.01 KP 0.95 ! LA 0.97 MK 1.03 NL 1.05 OV 1.16 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.02 HN 0.99 KP 0.99 ! LA 0.98 MK 1.07 NL 1.09 OV 0.96 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.97 KP 1.00* ! LA 0.98 MK 1.01 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.075753Jy sigma=0.000663 ! Fit after self-cal, rms=0.075337Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.873 mas, bmaj=6.276 mas, bpa=13.95 degrees ! Estimated noise=750.291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000363334 Jy ! Component: 100 - total flux cleaned = -0.000333402 Jy ! Component: 150 - total flux cleaned = -0.000319752 Jy ! Component: 200 - total flux cleaned = -0.000319788 Jy ! Total flux subtracted in 200 components = -0.000319788 Jy ! Clean residual min=-0.002257 max=0.002837 Jy/beam ! Clean residual mean=-0.000007 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.105875 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.105875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075329Jy sigma=0.000661 ! Fit after self-cal, rms=0.075324Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075324Jy sigma=0.000661 ! Fit after self-cal, rms=0.076163Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.853 mas, bmaj=6.305 mas, bpa=13.6 degrees ! Estimated noise=749.736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185203 Jy ! Component: 100 - total flux cleaned = -0.000134139 Jy ! Component: 150 - total flux cleaned = -0.00012099 Jy ! Component: 200 - total flux cleaned = -0.000120932 Jy ! Total flux subtracted in 200 components = -0.000120932 Jy ! Clean residual min=-0.002102 max=0.002245 Jy/beam ! Clean residual mean=-0.000003 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.105754 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.105754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076157Jy sigma=0.000658 ! Fit after self-cal, rms=0.076177Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (95, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219674 Jy ! Component: 100 - total flux cleaned = 0.00259897 Jy ! Component: 150 - total flux cleaned = 0.00280657 Jy ! Component: 200 - total flux cleaned = 0.00280843 Jy ! Total flux subtracted in 200 components = 0.00280843 Jy ! Clean residual min=-0.002020 max=0.002166 Jy/beam ! Clean residual mean=-0.000008 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.108563 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 65 components and 0.108563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076110Jy sigma=0.000657 ! Fit after self-cal, rms=0.076111Jy sigma=0.000657 ! Inverting map ! Added new window around map position (11, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207724 Jy ! Component: 100 - total flux cleaned = 0.00271603 Jy ! Component: 150 - total flux cleaned = 0.00307603 Jy ! Component: 200 - total flux cleaned = 0.00347574 Jy ! Total flux subtracted in 200 components = 0.00347574 Jy ! Clean residual min=-0.001859 max=0.001864 Jy/beam ! Clean residual mean=-0.000003 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.112038 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 0.112038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076044Jy sigma=0.000656 ! Fit after self-cal, rms=0.076042Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076042Jy sigma=0.000656 ! Fit after self-cal, rms=0.076026Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.847 mas, bmaj=6.306 mas, bpa=13.55 degrees ! Estimated noise=748.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000861207 Jy ! Component: 100 - total flux cleaned = 0.0012281 Jy ! Component: 150 - total flux cleaned = 0.00152241 Jy ! Component: 200 - total flux cleaned = 0.00174084 Jy ! Total flux subtracted in 200 components = 0.00174084 Jy ! Clean residual min=-0.001827 max=0.001918 Jy/beam ! Clean residual mean=-0.000003 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.113779 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 91 components and 0.113779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076003Jy sigma=0.000656 ! Fit after self-cal, rms=0.076006Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-113, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193343 Jy ! Component: 100 - total flux cleaned = 0.00236131 Jy ! Component: 150 - total flux cleaned = 0.00270043 Jy ! Component: 200 - total flux cleaned = 0.00296727 Jy ! Total flux subtracted in 200 components = 0.00296727 Jy ! Clean residual min=-0.001640 max=0.001713 Jy/beam ! Clean residual mean=-0.000006 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.116747 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 109 components and 0.116747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075951Jy sigma=0.000656 ! Fit after self-cal, rms=0.075948Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075948Jy sigma=0.000656 ! Fit after self-cal, rms=0.075864Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.97 mas, bmaj=9.09 mas, bpa=24.43 degrees ! Estimated noise=897.757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000931215 Jy ! Component: 100 - total flux cleaned = 0.0014716 Jy ! Component: 150 - total flux cleaned = 0.00165004 Jy ! Component: 200 - total flux cleaned = 0.00175551 Jy ! Total flux subtracted in 200 components = 0.00175551 Jy ! Clean residual min=-0.001584 max=0.001824 Jy/beam ! Clean residual mean=-0.000009 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.118502 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 137 components and 0.118502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075855Jy sigma=0.000655 ! Fit after self-cal, rms=0.075854Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331212 Jy ! Component: 100 - total flux cleaned = 0.000363408 Jy ! Component: 150 - total flux cleaned = 0.000393129 Jy ! Component: 200 - total flux cleaned = 0.000462322 Jy ! Total flux subtracted in 200 components = 0.000462322 Jy ! Clean residual min=-0.001589 max=0.001814 Jy/beam ! Clean residual mean=-0.000009 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.118964 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 151 components and 0.118964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075850Jy sigma=0.000655 ! Fit after self-cal, rms=0.075850Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=6.306 mas, bpa=13.48 degrees ! Estimated noise=748.075 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.844 x 6.306 at 13.48 degrees (North through East) ! Clean map min=-0.0018014 max=0.10299 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=5.602 mas, bpa=12.44 degrees ! Estimated noise=1036.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0799876 Jy ! Component: 100 - total flux cleaned = 0.0974891 Jy ! Component: 150 - total flux cleaned = 0.102335 Jy ! Component: 200 - total flux cleaned = 0.105563 Jy ! Total flux subtracted in 200 components = 0.105563 Jy ! Clean residual min=-0.002716 max=0.002586 Jy/beam ! Clean residual mean=-0.000004 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.105563 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.105563 Jy ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=6.306 mas, bpa=13.48 degrees ! Estimated noise=748.075 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295954 Jy ! Component: 100 - total flux cleaned = 0.0047293 Jy ! Component: 150 - total flux cleaned = 0.0059179 Jy ! Component: 200 - total flux cleaned = 0.00695805 Jy ! Total flux subtracted in 200 components = 0.00695805 Jy ! Clean residual min=-0.001905 max=0.001792 Jy/beam ! Clean residual mean=-0.000007 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.112521 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 57 components and 0.112521 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.97 mas, bmaj=9.09 mas, bpa=24.43 degrees ! Estimated noise=897.757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182536 Jy ! Component: 100 - total flux cleaned = 0.00270192 Jy ! Component: 150 - total flux cleaned = 0.0032518 Jy ! Component: 200 - total flux cleaned = 0.00369587 Jy ! Total flux subtracted in 200 components = 0.00369587 Jy ! Clean residual min=-0.001725 max=0.001890 Jy/beam ! Clean residual mean=-0.000010 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.116217 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395231 Jy ! Component: 100 - total flux cleaned = 0.000747622 Jy ! Component: 150 - total flux cleaned = 0.00108991 Jy ! Component: 200 - total flux cleaned = 0.00142196 Jy ! Total flux subtracted in 200 components = 0.00142196 Jy ! Clean residual min=-0.001649 max=0.001855 Jy/beam ! Clean residual mean=-0.000011 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.117639 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 120 components and 0.117639 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=6.306 mas, bpa=13.48 degrees ! Estimated noise=748.075 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000416439 Jy ! Component: 100 - total flux cleaned = 0.000545198 Jy ! Component: 150 - total flux cleaned = 0.000662959 Jy ! Component: 200 - total flux cleaned = 0.000773769 Jy ! Total flux subtracted in 200 components = 0.000773769 Jy ! Clean residual min=-0.001675 max=0.001600 Jy/beam ! Clean residual mean=-0.000005 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.118413 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 143 components and 0.118413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075882Jy sigma=0.000656 ! Fit after self-cal, rms=0.075879Jy sigma=0.000656 wmodel J1301+4634_S_2017_06_15_pus_map.mod ! Writing 143 model components to file: J1301+4634_S_2017_06_15_pus_map.mod wobs J1301+4634_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1301+4634_S_2017_06_15_pus_uvs.fits wwins J1301+4634_S_2017_06_15_pus_map.win ! wwins: Wrote 4 windows to J1301+4634_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000281785 Jy ! Component: 100 - total flux cleaned = -0.000396162 Jy ! Component: 150 - total flux cleaned = -0.000583831 Jy ! Component: 200 - total flux cleaned = -0.000685999 Jy ! Component: 250 - total flux cleaned = -0.000809753 Jy ! Component: 300 - total flux cleaned = -0.000978146 Jy ! Component: 350 - total flux cleaned = -0.00116506 Jy ! Component: 400 - total flux cleaned = -0.00130197 Jy ! Component: 450 - total flux cleaned = -0.00143552 Jy ! Component: 500 - total flux cleaned = -0.00150082 Jy ! Component: 550 - total flux cleaned = -0.0016076 Jy ! Component: 600 - total flux cleaned = -0.00179483 Jy ! Component: 650 - total flux cleaned = -0.00187611 Jy ! Component: 700 - total flux cleaned = -0.00197635 Jy ! Component: 750 - total flux cleaned = -0.00203574 Jy ! Component: 800 - total flux cleaned = -0.00211358 Jy ! Component: 850 - total flux cleaned = -0.00215183 Jy ! Component: 900 - total flux cleaned = -0.00215184 Jy ! Component: 950 - total flux cleaned = -0.00218893 Jy ! Component: 1000 - total flux cleaned = -0.00222525 Jy ! Component: 1050 - total flux cleaned = -0.00224327 Jy ! Component: 1100 - total flux cleaned = -0.00231438 Jy ! Component: 1150 - total flux cleaned = -0.00231396 Jy ! Component: 1200 - total flux cleaned = -0.00234869 Jy ! Component: 1250 - total flux cleaned = -0.00236591 Jy ! Component: 1300 - total flux cleaned = -0.00241733 Jy ! Component: 1350 - total flux cleaned = -0.00246781 Jy ! Component: 1400 - total flux cleaned = -0.00246779 Jy ! Component: 1450 - total flux cleaned = -0.00246773 Jy ! Component: 1500 - total flux cleaned = -0.00248401 Jy ! Component: 1550 - total flux cleaned = -0.00250026 Jy ! Component: 1600 - total flux cleaned = -0.00246835 Jy ! Component: 1650 - total flux cleaned = -0.00250005 Jy ! Component: 1700 - total flux cleaned = -0.0025313 Jy ! Component: 1750 - total flux cleaned = -0.00248475 Jy ! Component: 1800 - total flux cleaned = -0.00250002 Jy ! Component: 1850 - total flux cleaned = -0.00256084 Jy ! Component: 1900 - total flux cleaned = -0.00248525 Jy ! Component: 1950 - total flux cleaned = -0.00250002 Jy ! Component: 2000 - total flux cleaned = -0.0025 Jy ! Component: 2050 - total flux cleaned = -0.00244107 Jy ! Component: 2100 - total flux cleaned = -0.00239731 Jy ! Component: 2150 - total flux cleaned = -0.00236855 Jy ! Component: 2200 - total flux cleaned = -0.00241168 Jy ! Component: 2250 - total flux cleaned = -0.00241162 Jy ! Component: 2300 - total flux cleaned = -0.00238325 Jy ! Component: 2350 - total flux cleaned = -0.00241131 Jy ! Component: 2400 - total flux cleaned = -0.00238331 Jy ! Component: 2450 - total flux cleaned = -0.00235562 Jy ! Component: 2500 - total flux cleaned = -0.0023282 Jy ! Component: 2550 - total flux cleaned = -0.00239646 Jy ! Component: 2600 - total flux cleaned = -0.00236898 Jy ! Component: 2650 - total flux cleaned = -0.00238245 Jy ! Component: 2700 - total flux cleaned = -0.00235565 Jy ! Component: 2750 - total flux cleaned = -0.00232898 Jy ! Component: 2800 - total flux cleaned = -0.00231574 Jy ! Component: 2850 - total flux cleaned = -0.00230267 Jy ! Component: 2900 - total flux cleaned = -0.00227662 Jy ! Component: 2950 - total flux cleaned = -0.00225067 Jy ! Component: 3000 - total flux cleaned = -0.00222504 Jy ! Component: 3050 - total flux cleaned = -0.00221224 Jy ! Component: 3100 - total flux cleaned = -0.00217421 Jy ! Component: 3150 - total flux cleaned = -0.00216151 Jy ! Component: 3200 - total flux cleaned = -0.00208627 Jy ! Component: 3250 - total flux cleaned = -0.00208625 Jy ! Component: 3300 - total flux cleaned = -0.00204916 Jy ! Component: 3350 - total flux cleaned = -0.00203698 Jy ! Component: 3400 - total flux cleaned = -0.00198813 Jy ! Component: 3450 - total flux cleaned = -0.00198808 Jy ! Component: 3500 - total flux cleaned = -0.00196398 Jy ! Component: 3550 - total flux cleaned = -0.00193996 Jy ! Component: 3600 - total flux cleaned = -0.00190426 Jy ! Component: 3650 - total flux cleaned = -0.00188056 Jy ! Component: 3700 - total flux cleaned = -0.00185703 Jy ! Component: 3750 - total flux cleaned = -0.0018804 Jy ! Component: 3800 - total flux cleaned = -0.00185698 Jy ! Component: 3850 - total flux cleaned = -0.00181041 Jy ! Component: 3900 - total flux cleaned = -0.00175289 Jy ! Component: 3950 - total flux cleaned = -0.00176436 Jy ! Component: 4000 - total flux cleaned = -0.00174159 Jy ! Component: 4050 - total flux cleaned = -0.00173025 Jy ! Total flux subtracted in 4096 components = -0.00173026 Jy ! Clean residual min=-0.000619 max=0.000712 Jy/beam ! Clean residual mean=-0.000001 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.116682 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 432 components and 0.116682 Jy ![Exited script file: muppet] wmap "J1301+4634_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.844 x 6.306 at 13.48 degrees (North through East) ! Clean map min=-0.0017349 max=0.10277 Jy/beam ! Writing clean map to FITS file: J1301+4634_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102771 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000204481 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.5969 0.5969 1.1938 2.3876 4.7752 9.5504 19.1008 38.2016 76.4032 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.102 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.844 x 6.306 at 13.48 degrees (North through East) ! Clean map min=-0.0017349 max=0.10277 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1301+4634_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:18:42 2019