! Started logfile: J1300+141B_S_2017_05_27_pus_uvs.log on Fri May 3 11:07:07 2019 obs J1300+141B_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1300+141B_S_2017_05_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.960234 visibilities/baseline/integration-bin. ! Found source: J1300+141B ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 19704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1300+141B_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 595 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.898064Jy sigma=0.028253 ! Fit after self-cal, rms=0.889013Jy sigma=0.028218 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.968 mas, bmaj=5.998 mas, bpa=0.7393 degrees ! Estimated noise=792.658 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0653035 Jy ! Component: 100 - total flux cleaned = 0.086321 Jy ! Total flux subtracted in 100 components = 0.086321 Jy ! Clean residual min=-0.015675 max=0.018841 Jy/beam ! Clean residual mean=-0.000006 rms=0.004559 Jy/beam ! Combined flux in latest and established models = 0.086321 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.086321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162910Jy sigma=0.002066 ! Fit after self-cal, rms=0.162845Jy sigma=0.002049 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.58 mas, bmaj=6.954 mas, bpa=-0.7948 degrees ! Estimated noise=528.051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137311 Jy ! Component: 100 - total flux cleaned = 0.0205941 Jy ! Component: 150 - total flux cleaned = 0.0213288 Jy ! Component: 200 - total flux cleaned = 0.0216376 Jy ! Total flux subtracted in 200 components = 0.0216376 Jy ! Clean residual min=-0.014076 max=0.014446 Jy/beam ! Clean residual mean=-0.000040 rms=0.003918 Jy/beam ! Combined flux in latest and established models = 0.107959 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.107959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160476Jy sigma=0.002002 ! Fit after self-cal, rms=0.160397Jy sigma=0.002001 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.72 FD 0.82 HN 0.92 KP 0.95 ! LA 0.96 MK 0.91 NL 0.85 OV 0.96 ! PT 1.01 SC 0.60 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.82 HN 0.97 KP 0.97 ! LA 0.92 MK 0.94 NL 1.01 OV 0.96 ! PT 0.98 SC 0.63 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 24.42 FD 0.91 HN 0.96 KP 0.96 ! LA 1.00 MK 0.97 NL 0.93 OV 0.97 ! PT 1.06 SC 0.62 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.98 KP 1.00* ! LA 0.94 MK 0.76 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.160397Jy sigma=0.002001 ! Fit after self-cal, rms=1.229507Jy sigma=0.000719 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=7.109 mas, bpa=-0.6935 degrees ! Estimated noise=569.949 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447035 Jy ! Component: 100 - total flux cleaned = 0.00430981 Jy ! Component: 150 - total flux cleaned = 0.004312 Jy ! Component: 200 - total flux cleaned = 0.00420622 Jy ! Total flux subtracted in 200 components = 0.00420622 Jy ! Clean residual min=-0.004342 max=0.003737 Jy/beam ! Clean residual mean=-0.000004 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.112165 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.112165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.228261Jy sigma=0.000719 ! Fit after self-cal, rms=1.228615Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.228615Jy sigma=0.000706 ! Fit after self-cal, rms=1.028252Jy sigma=0.000686 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=7.08 mas, bpa=-1.147 degrees ! Estimated noise=580.009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000852746 Jy ! Component: 100 - total flux cleaned = 0.000553908 Jy ! Component: 150 - total flux cleaned = 0.000472605 Jy ! Component: 200 - total flux cleaned = 0.000326208 Jy ! Total flux subtracted in 200 components = 0.000326208 Jy ! Clean residual min=-0.002380 max=0.002284 Jy/beam ! Clean residual mean=-0.000001 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.112491 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 0.112491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.027604Jy sigma=0.000685 ! Fit after self-cal, rms=1.027589Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.70507e-05 Jy ! Component: 100 - total flux cleaned = -0.00017383 Jy ! Component: 150 - total flux cleaned = -0.000280971 Jy ! Component: 200 - total flux cleaned = -0.000329847 Jy ! Total flux subtracted in 200 components = -0.000329847 Jy ! Clean residual min=-0.002303 max=0.002309 Jy/beam ! Clean residual mean=-0.000001 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.112161 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.112161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.027348Jy sigma=0.000685 ! Fit after self-cal, rms=1.027347Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.027347Jy sigma=0.000685 ! Fit after self-cal, rms=0.368945Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=7.122 mas, bpa=-1.933 degrees ! Estimated noise=586.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164719 Jy ! Component: 100 - total flux cleaned = -2.90921e-06 Jy ! Component: 150 - total flux cleaned = -0.00010418 Jy ! Component: 200 - total flux cleaned = -0.000132397 Jy ! Total flux subtracted in 200 components = -0.000132397 Jy ! Clean residual min=-0.001658 max=0.001756 Jy/beam ! Clean residual mean=0.000001 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.112029 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.112029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.368801Jy sigma=0.000675 ! Fit after self-cal, rms=0.368788Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.56292e-07 Jy ! Component: 100 - total flux cleaned = -4.82348e-05 Jy ! Component: 150 - total flux cleaned = -9.21322e-05 Jy ! Component: 200 - total flux cleaned = -0.000132632 Jy ! Total flux subtracted in 200 components = -0.000132632 Jy ! Clean residual min=-0.001672 max=0.001805 Jy/beam ! Clean residual mean=0.000002 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.111896 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.111896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.368737Jy sigma=0.000674 ! Fit after self-cal, rms=0.368736Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.368736Jy sigma=0.000674 ! Fit after self-cal, rms=0.379318Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.386 mas, bmaj=10.85 mas, bpa=-3.483 degrees ! Estimated noise=752.947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.8553e-05 Jy ! Component: 100 - total flux cleaned = -1.05075e-06 Jy ! Component: 150 - total flux cleaned = -0.000116688 Jy ! Component: 200 - total flux cleaned = -0.000182744 Jy ! Total flux subtracted in 200 components = -0.000182744 Jy ! Clean residual min=-0.001761 max=0.002009 Jy/beam ! Clean residual mean=0.000002 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.111713 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 70 components and 0.111713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.379181Jy sigma=0.000674 ! Fit after self-cal, rms=0.379176Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.7375e-05 Jy ! Component: 100 - total flux cleaned = -0.000107819 Jy ! Component: 150 - total flux cleaned = -0.000153112 Jy ! Component: 200 - total flux cleaned = -0.000192257 Jy ! Total flux subtracted in 200 components = -0.000192257 Jy ! Clean residual min=-0.001783 max=0.001971 Jy/beam ! Clean residual mean=0.000002 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.111521 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.111521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.379114Jy sigma=0.000674 ! Fit after self-cal, rms=0.379110Jy sigma=0.000674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=7.18 mas, bpa=-2.421 degrees ! Estimated noise=594.863 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 7.18 at -2.421 degrees (North through East) ! Clean map min=-0.0016919 max=0.09642 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=6.564 mas, bpa=-4.184 degrees ! Estimated noise=917.414 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0756979 Jy ! Component: 100 - total flux cleaned = 0.0947482 Jy ! Component: 150 - total flux cleaned = 0.101926 Jy ! Component: 200 - total flux cleaned = 0.10528 Jy ! Total flux subtracted in 200 components = 0.10528 Jy ! Clean residual min=-0.002674 max=0.002848 Jy/beam ! Clean residual mean=0.000002 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.10528 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.10528 Jy ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=7.18 mas, bpa=-2.421 degrees ! Estimated noise=594.863 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278229 Jy ! Component: 100 - total flux cleaned = 0.00419839 Jy ! Component: 150 - total flux cleaned = 0.00502758 Jy ! Component: 200 - total flux cleaned = 0.00553384 Jy ! Total flux subtracted in 200 components = 0.00553384 Jy ! Clean residual min=-0.001832 max=0.001811 Jy/beam ! Clean residual mean=0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.110814 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 0.110814 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.386 mas, bmaj=10.85 mas, bpa=-3.483 degrees ! Estimated noise=752.947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310412 Jy ! Component: 100 - total flux cleaned = 0.000311437 Jy ! Component: 150 - total flux cleaned = 0.000311608 Jy ! Component: 200 - total flux cleaned = 0.000301066 Jy ! Total flux subtracted in 200 components = 0.000301066 Jy ! Clean residual min=-0.001849 max=0.001981 Jy/beam ! Clean residual mean=0.000002 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.111115 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.20819e-08 Jy ! Component: 100 - total flux cleaned = -8.24608e-06 Jy ! Component: 150 - total flux cleaned = -1.61007e-05 Jy ! Component: 200 - total flux cleaned = -2.31347e-05 Jy ! Total flux subtracted in 200 components = -2.31347e-05 Jy ! Clean residual min=-0.001857 max=0.001990 Jy/beam ! Clean residual mean=0.000002 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.111092 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.111092 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=7.18 mas, bpa=-2.421 degrees ! Estimated noise=594.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022314 Jy ! Component: 100 - total flux cleaned = 0.000204692 Jy ! Component: 150 - total flux cleaned = 0.000230332 Jy ! Component: 200 - total flux cleaned = 0.000252197 Jy ! Total flux subtracted in 200 components = 0.000252197 Jy ! Clean residual min=-0.001892 max=0.001854 Jy/beam ! Clean residual mean=0.000001 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.111344 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.111344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378939Jy sigma=0.000674 ! Fit after self-cal, rms=0.378939Jy sigma=0.000674 wmodel J1300+141B_S_2017_05_27_pus_map.mod ! Writing 65 model components to file: J1300+141B_S_2017_05_27_pus_map.mod wobs J1300+141B_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1300+141B_S_2017_05_27_pus_uvs.fits wwins J1300+141B_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J1300+141B_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304671 Jy ! Component: 100 - total flux cleaned = 0.000244161 Jy ! Component: 150 - total flux cleaned = 0.000128892 Jy ! Component: 200 - total flux cleaned = -6.72452e-05 Jy ! Component: 250 - total flux cleaned = -0.000176032 Jy ! Component: 300 - total flux cleaned = -0.000228544 Jy ! Component: 350 - total flux cleaned = -0.00028047 Jy ! Component: 400 - total flux cleaned = -0.000331497 Jy ! Component: 450 - total flux cleaned = -0.000405871 Jy ! Component: 500 - total flux cleaned = -0.000429754 Jy ! Component: 550 - total flux cleaned = -0.000429415 Jy ! Component: 600 - total flux cleaned = -0.00045282 Jy ! Component: 650 - total flux cleaned = -0.000498949 Jy ! Component: 700 - total flux cleaned = -0.000522054 Jy ! Component: 750 - total flux cleaned = -0.000544384 Jy ! Component: 800 - total flux cleaned = -0.00050015 Jy ! Component: 850 - total flux cleaned = -0.000521921 Jy ! Component: 900 - total flux cleaned = -0.000565096 Jy ! Component: 950 - total flux cleaned = -0.000586297 Jy ! Component: 1000 - total flux cleaned = -0.00058659 Jy ! Component: 1050 - total flux cleaned = -0.00060714 Jy ! Component: 1100 - total flux cleaned = -0.000607049 Jy ! Component: 1150 - total flux cleaned = -0.000566533 Jy ! Component: 1200 - total flux cleaned = -0.000566739 Jy ! Component: 1250 - total flux cleaned = -0.000487104 Jy ! Component: 1300 - total flux cleaned = -0.000487149 Jy ! Component: 1350 - total flux cleaned = -0.000486989 Jy ! Component: 1400 - total flux cleaned = -0.000370863 Jy ! Component: 1450 - total flux cleaned = -0.000390168 Jy ! Component: 1500 - total flux cleaned = -0.00039022 Jy ! Component: 1550 - total flux cleaned = -0.000352668 Jy ! Component: 1600 - total flux cleaned = -0.00035286 Jy ! Component: 1650 - total flux cleaned = -0.0002793 Jy ! Component: 1700 - total flux cleaned = -0.000315927 Jy ! Component: 1750 - total flux cleaned = -0.000297823 Jy ! Component: 1800 - total flux cleaned = -0.000261906 Jy ! Component: 1850 - total flux cleaned = -0.000226402 Jy ! Component: 1900 - total flux cleaned = -0.000191241 Jy ! Component: 1950 - total flux cleaned = -0.000226393 Jy ! Component: 2000 - total flux cleaned = -0.000208965 Jy ! Component: 2050 - total flux cleaned = -0.000191823 Jy ! Component: 2100 - total flux cleaned = -0.000243156 Jy ! Component: 2150 - total flux cleaned = -0.000243102 Jy ! Component: 2200 - total flux cleaned = -0.000158881 Jy ! Component: 2250 - total flux cleaned = -0.000192364 Jy ! Component: 2300 - total flux cleaned = -0.000192152 Jy ! Component: 2350 - total flux cleaned = -0.000225008 Jy ! Component: 2400 - total flux cleaned = -0.000159804 Jy ! Component: 2450 - total flux cleaned = -0.000176012 Jy ! Component: 2500 - total flux cleaned = -0.000176181 Jy ! Component: 2550 - total flux cleaned = -0.000176047 Jy ! Component: 2600 - total flux cleaned = -0.000207754 Jy ! Component: 2650 - total flux cleaned = -0.000223459 Jy ! Component: 2700 - total flux cleaned = -0.000286148 Jy ! Component: 2750 - total flux cleaned = -0.000255129 Jy ! Component: 2800 - total flux cleaned = -0.000347531 Jy ! Component: 2850 - total flux cleaned = -0.000362699 Jy ! Component: 2900 - total flux cleaned = -0.000377895 Jy ! Component: 2950 - total flux cleaned = -0.000392961 Jy ! Component: 3000 - total flux cleaned = -0.000438185 Jy ! Component: 3050 - total flux cleaned = -0.000497919 Jy ! Component: 3100 - total flux cleaned = -0.000483086 Jy ! Component: 3150 - total flux cleaned = -0.000512756 Jy ! Component: 3200 - total flux cleaned = -0.000556818 Jy ! Component: 3250 - total flux cleaned = -0.00055681 Jy ! Component: 3300 - total flux cleaned = -0.000585772 Jy ! Component: 3350 - total flux cleaned = -0.000643548 Jy ! Component: 3400 - total flux cleaned = -0.000700916 Jy ! Component: 3450 - total flux cleaned = -0.000715125 Jy ! Component: 3500 - total flux cleaned = -0.000757775 Jy ! Component: 3550 - total flux cleaned = -0.000771887 Jy ! Component: 3600 - total flux cleaned = -0.000785949 Jy ! Component: 3650 - total flux cleaned = -0.000855708 Jy ! Component: 3700 - total flux cleaned = -0.00084187 Jy ! Component: 3750 - total flux cleaned = -0.000855681 Jy ! Component: 3800 - total flux cleaned = -0.000855666 Jy ! Component: 3850 - total flux cleaned = -0.00088305 Jy ! Component: 3900 - total flux cleaned = -0.000923786 Jy ! Component: 3950 - total flux cleaned = -0.00097766 Jy ! Component: 4000 - total flux cleaned = -0.000964238 Jy ! Component: 4050 - total flux cleaned = -0.000964179 Jy ! Total flux subtracted in 4096 components = -0.000964302 Jy ! Clean residual min=-0.000671 max=0.000760 Jy/beam ! Clean residual mean=0.000002 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.11038 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 350 components and 0.110379 Jy ![Exited script file: muppet] wmap "J1300+141B_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 7.18 at -2.421 degrees (North through East) ! Clean map min=-0.0014077 max=0.09727 Jy/beam ! Writing clean map to FITS file: J1300+141B_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0972705 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000249135 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.768379 0.768379 1.53676 3.07352 6.14704 12.2941 24.5881 49.1763 98.3526 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.097 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 7.18 at -2.421 degrees (North through East) ! Clean map min=-0.0014077 max=0.09727 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1300+141B_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:07:12 2019